We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
automatic baling press Manufacturer: Avermann Type: AVOS 1810-5-74/100 Built: 2011 Engine hours: approx. 13,685 h technical data: Pressing force: 100 t Operating pressure 320 bar Filling opening: 1,800 x 1,000 mm Channel format: 1,100 x 700 (W x H) Drive power: 1 x 45 kW + 1 x 30 kW, Total connection power: 105 kW, Hedging: 200 A fully automatic binding 5-fold vertically, Throughput: at 30 kg/m3: approx. 9.0 t/hour at 50 kg/m3: approx. 13.0 t/hour at 100 kg/m3: approx. 20.0 t/hour Bale weights up to approx. 800 kg Oil tank volume: approx. 2,000 Ltr. Transport dimensions: approx. 11,200 x 2,355 x 2,700 mm Machine weight: approx. 23.0 t Machine will be dismantled in January 2021. Subject to errors in the technical data!
used
Automatic Channel Baler Manufacturer: AVERMANN Type: AVOS 1211-15/50 Year of Make: 2015 Operating hours: approx. 2,850 h specifications: Press force: 50 t Specific pressing force: 6.49 kg/cm² Drive power: 15 kW Total connected load: 22 kW Throughput: at 35 kg/m³ bulk density: 2.7 t/h at 60 kg/m³ bulk density: 4.7 t/h at 100 kg/m³ bulk density: 6.5 t/h Filling opening: 1,200 x 1,100 mm Channel format: 1,100 x 700 mm Bale weight: up to approx. 400 kg Machine weight: approx. 8,500 kg
used
Bale size (W x H) approx. 1,100 x 700 mm Bale weight approx550kg
used
Specifications Maximum pressure: 4.6 tons Press force: 1.31 kg/cm² Bale size: 500x700x700 mm Power supply: 400 V/ 1.1 kW Year of construction: 1993
used
Balemaster Year: 2006 Type: CMG 268 Waste compactor
used
fully automatic baler Manufacturer: BAUER Type: 500 Year of construction: 1993 specifications: Press force: 50 t Specific pressing force: 6.68 kg/cm² Channel format: 680 x 1,100 mm Bale weight: 450 - 550 kg, depending on material and bale length Filling opening: 1,600 x 1,020 mm Filling volume: 1.66 m³ Drive power: 2 x 22 kW Throughput: - Idle approx. 450 m³/h - under operating conditions approx. 200 m³/h Press services at: - 20 to 30 kg/m³ bulk density approx. 4 to 6 t/h - 35 to 50 kg/m³ bulk density approx. 7 to 10 t/h - 60 kg/m³ bulk density approx. 12 t/h - 100 kg/m³ bulk density approx. 18 t/h Machine weight: approx. 21 t Optionally with chain conveyor belt according to pictures. Subject to accuracy of technical data.
Fully Automatic Vertical Baler BEMA Bale size H 1,100 x W 1,500 x D 1,100 mm, weight max 450 kg, baling pressure 50 to, drive 5.5 kW, cycle time 40 sec, 5-fold tie-down, integrated hold-down Oversized loading opening, automatic bale ejection, only 216 operating hours Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827
used
Baler Up to 500 kg bale weight depending on the material Weight approx. 750 kg
used
Tot.kW 43 Volt 400V /50Hz
used
Technical data baler:Manufacturer BOAType 2040.S.5V.71.37Year of manufacture 2003Operating hours approx. 35,598 hours, as of MarchPressing force main press 71 tSpecific pressing pressure 9.1 kg/cm²Operating pressure 280 barDimensions of feed chute 1,620 x 1,080 mmBale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mmDrive power 37 kWTying system 5-fold vertical, fully automaticThroughput rates for quality:B12 / B19, 40 ? 60 kg/cm³, up to approx. 9 t/hour, bale weight up to 850 kg/bale, depends on materialHydraulic oil tank capacity 800 lTransport dimensions 10,020 x 2,400 x 3,400 mm (l x w x h)Machine weight press approx. 24 tNoise level
used
A complete baling press system is for sale, consisting of a chain belt conveyor, the baling press with wire stations and bale chute.Technical data baler:Manufacturer BOAType Impress D130.110.B.5-(5R).1.6Year of construction 2009Press power main press 127 tonsSpecific press capacity 10,7 kg/cm²Working pressure 280 barFeed channel 1.620 x 972 mm (l x w)Press volume / cycle 4,1 cbmVolume throughput without load up to 865 cbm/hourCycle time under operating conditions 22 sec.Press stroke 2.900 mmBale size 1.100 x 1.100 mm (w x h) length adjustableDriving power 2 x 55 kWConnected load 132 kWTying system 5-fold vertical, 5-fold horizontal, fully automatedThroughput rate at abulk weight of 30 kg/cbm up to 17 to/hbulk weight of 50 kg/cbm up to 29 to/hbulk weight of 100 kg/cbm up to 37 to/hbulk weight of 150 kg/cbm up to 51 to/hBale weight up to 1.200 kgVolume hydraulic oil tank 1,850 LSPS contro ...
used
Technical data baler:Manufacturer BOA Recycling Systems B.V.Type M75-45-A-5-1.6 EcolineYear of construction 2021Hours of operation 2,658 hours (as of May 2024)Number of pressed bales 42,212 pieces (as of May 2024)Press power main press 71,2 kN (71 t)Specific press capacity 9 kg/cm²Operating pressure 280 barCylinder stroke 2,200 mmFeed channel 1,620 x 1,000 mmCapacity per cycle time 2,4 m³Theoretic cycle time 21 secondsTheoretic throughput rate 450 m³/hourBale size 1,100 x 720 mm, length variably adjustable up to 1,400 mmDriving motor 45 kWConnected load 100 kWCurrent consumption 200 ATying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal bindingThroughput rate at abulk weight of 30 kg/cbm approx. 13,6 tons/hourbulk weight of 50 kg/cbm approx. 24,2 tons/hourbulk weight of 100 kg/cbm approx. 36,4 tons/hourbulk weight of 150 kg/cb ...
used
Baler Bollegraaf HBC 100 A, built in 2001 Specifications: Manufacturer: Bollegraaf Type: HBC 100 A Year of construction: 2001 Press force: 100 t Drive power: 75 kW Filling opening: 1100 x 1600 mm Capacity at 30 kg/m³: 16.2 t/h 50 kg/m³: 25 t/h 100 kg/m³: 47 t/h Bale size: 1100 x 720 mm (WxH), length variable Bale weight: 550-880 kg Binding: 5-fold vertical Dimensions: approx. 11750 x 2500 x 3470 mm (LxWxH) Weight: approx. 34000 kg
used
Specifications Maximum pressure: 16 tons Power supply: 400V / 4kW Press force: 1.66 kg/cm² B Year of construction: 2006 Bale size: 1200x800x800 mm Productivity:- Bale weight: approx. 200-300 kg Price: on request
used
Specifications Maximum pressure: 4 tons Power supply: 400V / 2.0kW Press force: 0.57 kg/cm² Year of construction: 2007 Bale size: 1000 x 700 x 800 mm Productivity:- Bale weight: approx. 70-120kg Price: on request Machine is fully functional, after renovation.
used
Specifications Maximum pressure: 20 tons Power connection: 400V / 4 kW Press force: 2.08 kg/cm² Year of Make: 2017 Bale size: 1200 x 800 x 80 mm Productivity:- Bale weight: approx. 200-300 kg Price: on request Machine is fully functional after technical supervision. If you have any questions, please call us: +48 696 072 985
used
Bramidan Recyclable Baler B30W, BJ 2018 - Profitable, process-optimising, climate-friendly - Simple, efficient, convenient and fast. - Volume reduction by up to 90% - Mega-wide filling opening The B30 wide is particularly easy to fill. It has a very wide filling opening, so that even very large cardboard boxes do not have to be folded. Whether it's packaging materials such as cardboard, paper and cardboard or plastics such as plastic, film, big bags and polystyrene – with this efficient and reliable baler, you can compress your waste to a minimum of its original volume. Press the packaging waste generated where it is generated – directly on site at your company. No matter whether trade, trade or industry. With the right baler, space-consuming waste containers, open landfills and expensive disposal costs are a thing of the past. The B30 Wide has an enormously wid ...
used
Technical data baler:Manufacturer according to type plate BRAMIDAN (original manufacturer Kampwert Umwelttechnik GmbH & Co. KG) Type HC 50 (formerly HPK 50 BK)Year of manufacture 2007Operating hours 11,970 hours, as of MarchPressing force 50 tonnesSpecific pressing force 650 kN/m²Feed chute dimensions 1250 x 1050 mm (L x W)Filling volume 0.96 cm³Theoretical cycle time 32 secondsTheoretical throughput capacity 108 m³/hourBale dimensions 1100 x 700 mm (w x h) length variableDrive power 15 kWPower consumption, total in 50 ATying 4-fold vertical, fully automaticThroughput rates with abulk density of 30 kg/cbm approx. 3.1 t/hourBulk weight of 60 kg/cbm approx. 4.5 tonnes/hourBulk weight of 100 kg/cbm approx. 7.2 tonnes/hourBale weights with a bale length of approx. 1.2 m up to 500 kg, depending on materialHydraulic oil tank capacity 400 litresPLC control Siemens S7-200 Effective transport ...
new
Baling press cardboard foil MF100 | 6 t pressing force The MF100 balers are ideal for pressing cardboard, paper, film, clothing and other materials. Volume reduction through compaction of up to 90%. The press is user-friendly with a large filling volume. The automatic bale ejector helps to remove the bales from the baler without any problems. Characteristics: Bale weight of up to 100kg Ideal for use with medium material volumes Fully automatic bale ejection Powerful cylinder for uniform material compaction Hold-down device to reduce material springback CE certified Made in Europe Specifications: Pressing force: 6 t Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 phase) Machine dimensions (H x W x D): 2371 x 1388 x 1046 mm Transport height: 1876 mm Machine weight: 632 kg Cycle time: 28 seconds Noise level: ...
new
Maximum pressure: 16 tons Pressing force: 2.54 kg/cm² Bale size: 1100x700x900 mm Power supply: 400 V/ 4 kW Year of construction: - Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
Vertical baler Dixi 50 S, built in 2020, very good condition Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2020 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex locatio ...
used
Specifications Maximum pressure: 60 tons Power supply: 400 V/ 7.5 kW Press force: 6.25 kg/cm² Year of construction: 2010 Bale size: 1200x800x1100 mm Price: on request Bale weight: approx. 340-500 kg Machine is fully functional, after technical supervision. If you have any questions, please call us at +48 696 072 985
used
Specifications Maximum pressure: 60 tons Power supply: 380V/7.5kW Pressing force: 6.81 kg/cm² Year of construction: 2011-2012 Bale size: 800x1100x1200 mm Productivity: approx. 3 bales/hour Bale weight: approx. 370-410 kg Price: on request
used
Specifications Maximum pressure: 60 tons Power supply: 380V/ 11 kW Pressing force: 6.81 kg/cm² Year of construction: 2012 Bale size: 800x1100x1200 mm Productivity: approx. 3 bales/hour Bale weight: approx. 370-410 kg Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of construction 2018 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2018 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
used
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, built in 2015, overhauled Hydraulic hoses and plastic guides are new Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2015 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
used
Baler Europress 610 V5, year of construction 2012 / 2017 refurbished by the manufacturer, very good condition, with chain belt conveyor belt Europress Technical Data Press Manufacturer: Europress Type 610 V5 Year of construction 2012 / 2017 refurbished by the manufacturer Drive power 2 x 30 kW Press force 90 t Insertion shaft 1,450 x 1,100 mm Bale dimensions 1,100 x 730 x 1200 mm, length is variable Bale weight 400-900 kg 5-fold vertical setting, fully automatic Filling volume hydraulic oil tank 2100 L Transport dimensions excl. Press 8,500 x 2,650 x 2,850 mm Transport weight press approx. 21 t Detailed information on general overhaul on request. Technical data on the conveyor belt will follow. Currently, the press is still in use.
used
Europress EP 6500 V5 H4, pressing force 120 t, year of construction 2009, drive power 75 kW, only 15,334 operating hours, overhauled Specifications: Manafacture: Europress Type 6500 V5 H4 Year of construction: 2009 Operating hours 15,334 hours, as of January Number of pressed bales 138,097 bales, as of January Pressing force main press 120 t Specific pressing force 142 kg/cm² Dimensions insertion chute 1,650 x 1,100 mm Filling volume 3 m³ Filling volume / pressing cycle 1.58 m³ Bale dimensions 730 x 1,100 Length variable Drive power 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total connected load 83 kW Current consumption 150 A Binding 5-fold vertical, 4-fold horizontal, fully automatic Bale weights 450 to 900 kg, depending on bale length and material Hydraulic oil tank volume 1,200 L PLC control (manuf., type) Siemens S7-200 Control Panel (Manufactur ...
used
Technical data baler:Manufacturer Europress Umwelttechnik GmbH, GermanyType EP5 150 V5Year of construction 2015Operating hours 19,173 hoursNumber of pressed bales 282,961 balesNumber of press strokes from the press ram 1,895,112 press strokesPressing force of main press 150 tSpecific pressing force 181.8 N/cm²Dimensions of feed chute 1,000 x 2,000 mm (w x l)Bale dimensions 750 x 1,100 mm (h x w), length variableDrive power 2 x 55 kW + 15 kW + 2 x 0.75 kWRated current 230 ACable cross-section supply 120 mm²Tying 5-fold vertical, fully automaticHydraulic oil tank capacity 4,300 lPLC control Siemens S7 / ET200STransport weight press 35,800 kgSpecial equipment:Base plates and side walls made of HARDOX steelFree tamper in front of the counter blade, with cleaning cycleScope of delivery:1 piece baler1 piece control cabinet1 set of oil collecting pans under the baler1 piece maintenance platfo ...
used
Baler for foam / paper cardboard
used
Technical data baler:Manufacturer unoTech GmbH, Niederlangen, GermanyTyp 120 V5Year of construction 2009Press force main press 100 tonsSpecific press force 145 N/m²Max. cutting force 120 tonsPress force free stamper 25 tonsFeed channel 2,000 x 1,020 mm (l x w)Capacity per cycle time 1,5 m³Theoretic throughput rate 650 m³/hourBale size 1,100 x 750 mm (w x h)Driving motor 2 x 75 kWConnected load 160 kWRated current 280 ATying system 5-fold vertical, fully automaticThroughput rate at abulk weight of 20 to 30 kg/cbm up to 15 tons/hourbulk weight of 35 to 50 kg/cbm up to 23 tons/hourbulk weight of 60 kg/cbm up to 27 tons/hourbulk weight of 100 kg/cbm up to 44 tons/hourBale weight 600 up to 900 kg, depends on materialSPS controller (manuf., type) Siemens S7 300Operating panel (manuf., type) Siemens SIMATICTransport dimensions only baler 13.630 x 2.350 x 3.130 mm (l x w x h)Machine weigh ...
used
Specifications Maximum pressure: 14 tons Pressing force: 2.92 kg/cm² Bale size: 800x600(600-1000)mm Bale weight: approx. 100 - 200 kg Power supply: 380V/7.5kW Year of construction: 1991 Productivity: approx. 3 bales/hr
used
Maximum pressure: 14 tons Pressing force: 2.92 kg/cm² Bale size: 800x600(600-1000) mm Bale weight: approx. 100 - 200 kg Power supply: 380V/7.5kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
Specifications Maximum pressure: 12 tons Power supply: 380V/ 5.5 kW Press force: 2.5 kg/cm² Year of construction: 1985-1993 Bale size: 800x600x(600-1000)mm Productivity: approx. 3 bales/hr Bale weight: approx. 100 - 200 kg Price: on request Machine is fully functional, after technical supervision.
used
Maximum pressure: 16 tons Pressing force: 2.08 kg/cm² Bale size: 1100x700x950 mm Bale weight: approx. 150-250 kg Power supply: 400V / 4kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
used
Specifications Maximum pressure: 30 tons Press force: 3.13 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 300-350 kg Power supply: 400V / 5.5 kW Year of construction: 1999 Productivity: approx. 3 bales/hr If you have any questions, please call us: +48 696 072 985
used
Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m
new
Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1998 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
Maximum pressure: 50 tons Pressing force: 5.2 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 7.5 kW Year of construction: 2000-2001 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1999, 2000 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
Vertical baler HSM VL 500.2, built in 2006 Specifications: Manufacturer: HSM Type: VL 500.2 Stock No.: 9858 Year of construction: 2006 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg
used
Vertical baler HSM VL 500.2, built in 2007 Specifications: Manufacturer: HSM Type: VL 500.2 Stock No.: 9859 Year of construction: 2007 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg
used
Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Pressing force: 5.62 kg/cm² Year of construction: 2004-2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 500 kg Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
Vertical baler HSM VL 500.2, year 2008 Specifications: Manufacturer: HSM Type: VL 500.2 Year of construction: 2008 Press force: 54 t Drive power: 7.5 kW Pressing time: approx. 43 s Filling opening: 1150 x 560 mm Bale size: 1200 x 800 x max. 1200 mm Bale weight: 420-450 kg Dimensions: 1900 x 1600 x 2200 mm (WxDxH) Weight: 2300 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale takes place from the location, without guarantee and guarantee. Our payment term is 100% prepayment.
used
Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Press force: 5.62 kg/cm² Year of construction: 2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical supervision. Price also includes paint renovation.
used
Specifications Maximum pressure: 60 tons Power supply: 400V / 7.5 kW Pressing force: 4.54 kg/cm² Year of construction: 2002 Bale size: 1200x1100x1100-1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 600 kg Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!
used
Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape.
used
used
Technical data baler:Manufacturer HSMType HL 3521 SYear of manufacture 2007Operating hours 964 hours, as of July 24Press force 32 tonnesSpecific pressing force 40 tonnesDimensions of feed chute 740 x 2,100 mm (w x l)Filling volume 1.86 m³Theoretical cycle time 44 secondsTheor. throughput 138 m³/hour Bale dimensions 800 x 1000 x 1200 mm (w x h x l)Drive power 22 kW6-fold horizontal tying, manual, with quicklings or yarnBale weights with a bale length of approx. 1.2 m up to 600 kg, depending on materialPLC control Siemens S7-200Siemens SIMATIC control panelEffective transport dimensions excl. baler 8,100 x 1,903 x 2,493 mm (L x W x H)Transport weight of baler 7,100 kgComments:The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors ...