Manufacturer:
(Category: 502)
Good day We hereby offer you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Press force main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm approx. 6.7 t/hour Machine weight press 12.5 t Hint: The machine is currently in our workshop for overhaul and is expected to be ready for operation and ready for sale in March. The machine documentation is available in German. A tour of the press is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your ...
Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH
used baler Manufacturer: PAAL Type: LIKON 110/150 Year of construction: May 2004 Specifications: Press weight up to: approx. 36 tons Press force at 275 bar: 150 t Operating pressure max. 320 bar Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 2 x 75 kW Flow rate: 425 m³/h Binding: 5-fold horizontal Total connected load: 176 kW Rated current: 340 A Pre-fuse (min.) 400 A Operating voltage: 3 x 400 VAC/50 Hz/N/PE Control voltage: 230 VAC / 24 VDC including: - Oil cooling - Low-pressure circuit - Free kicks - Key locking system Transport dimensions: Length: 13,803 mm Width: 2,500 mm Height: 3,164 mm without wire unwinding devices, without binding wire, without feed belt, without a personal protection system, without conveyor belt hopper and withou ...
Fully automatic baler Manufacturer: PAAL Type KONTI 275 D Year of Make: 2000 specifications: Press force: 75 t Drive power: 1 x 45 kW Total connected load: kW __ / 170 A Throughput under operating conditions: 280 m³/h Filling opening: 1,020 x 1,550 mm Bale size:750 x 1,100 mm Binding: 4-fold vertical incl. front printing plate slot cover Machine weight: approx. 25 t Bale weights: up to approx. 600 kg Including: - Free kicks - Large digit display
Specifications Maximum pressure: 85 tons Year of Make: 1994 Pressing force: 103 tons/m² Number of ties: 4 - vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1750 mm Bale weight: 500-650 kg Weight: 26 tons Power connection: 400 V/ 55 kW Bale tying: automatic
Technical parameters Aluminium chip briquetting line with coolant recovery. Equipped with: drip tray, chip hopper, ascending feeder, magnetic separator and coolant purification system. Production of briquettes has many advantages: • Reduction in volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Inexpensive disposal • Profitable sales Technical data: Throughput: up to 300 kg/h (depending on the material), Briquette diameter: Ø 70 mm, Motor: 7.5 KW, 400 volts / 50 Hz / 3-phase, . Dimensions: 2095 x 1300 x 1400 mm l/w/h Weight: 1300 kg. . Year of manufacture: 2016.
Hopper Control Panel Weight 1,780kg Press Force 3,100PSI Dimensions Lenght 3,000mm Width 752mm Height 1,520mm Bale Size 280mm x 280mm x 280mm (adjustable) CapaCity 1,000kg per hr Motors 380/415 volts 3 Phase,50Hz Hydraulic Oli Capacity 422 L Type ISO46 Chose of two
Technical parameters • Length: 7.20 m • Width: 1.7 m • Height: 2.8 m • Feed opening: 95 x 140 cm • Bale: 100 x 72 cm Coq0I03T • Pressure: 40 t • Motor: 15 kW • Binding – 4 x horizontal
Technical parameters Clothes baler, press VALVAN V75 S3000-SK 75 tonnes Additionally: 3 x belt conveyors 1 x Tippler Pressure 75 t E2M97Iu Current requirement 25 kW Binding 7×2 Year of construction 1998
We sell our PPK baler. the main pump and auxiliary pump were replaced this year 2024. Invoices are available. The press only pressed cardboard boxes. It can be demonstrated and put into operation at any time.
Specifications Maximum pressure: 45 tons Year of Make: 2017 Pressing force: 6.9 kg/cm² Number of bindings: 3 Channel cross-section: 900 × 720 × 600 - 1200 mm Dimensions of the tailgate: 820 × 1250 mm Bale weight: 250 - 400 kg Weight: approx. 7 t Power connection: 400 V Bale tying: automatic Theoretical throughput 174 m3/hour Theoretical throughput to density 20 kg/m - 3.48 tons/hour Theoretical flow rate to density 50 kg/m - 8.7 tons/hour If you have any questions, please call us: +48 696 072 985
Hopper Control Panel Weight 1,780kg Press Force 3,100PSI Dimensions Lenght 3,000mm Width 752mm Height 1,520mm Bale Size 280mm x 280mm x 280mm (adjustable) CapaCity 1,000kg per hr Motors 380/415 volts 3 Phase,50Hz Hydraulic Oli Capacity 422 L Type ISO46 Chose of two
automatic baler Manufacturer: PAAL Type: KONTI 600 F/k with cross-binding Year of construction 2008 Machine was only in operation for 4 years specifications: Press force: 145 t Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 75 kW Throughput capacity:approx. 510 m³/h Capacity at 35 kg/m³: 17.5 t/h Capacity at 60 kg/m³: 30.0 t/h Capacity at 100 kg/m³: 47.0 t/h Binding: 5-fold vertical Additional 4-fold automatic horizontal bonding Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 42 t Attached pictures are only sample pictures!
automatic baler Manufacturer: PAAL Type: KONTI 600 F Year of construction 2009 Operating hours: only approx. 22,000 specifications: Pressing force: 150 t at 300 bar Specific pressing force: 124 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 2 x 45 kW Throughput: approx. 375 m³/h Capacity at 35 kg/m³: 13.0 t/h Capacity at 60 kg/m³: 22.5 t/h Capacity at 100 kg/m³: 35.0 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,250 kg depending on baled material and bale length Machine weight: up to approx. 45 t
Bale dimensions: W 1000 x H 710 x L 1100 – 1500 Baler dimensions: L 8000 x W 2150 x H 2000 Motor power: 18.5 kW Hopper: 1000 x 910
The EPS900 can compact expanded polystyrene foam for recycling or extra revenue purposes. This compactor is a suitable choice for businesses such as manufacturing and retail. Technical parameters • Condition:used • Capacity: Up to 15 kg per hour • Volume reduction: Min. 40:1 measured on fruit or fish boxes • Block weight: < 300 gram/litre (< 300 kg per m3) • Block dimensions: 137 mm x 137 mm • Material: Only EPS 6 Expanded Polystyrene • Density: 10-30 kg per m3 (10-30 gram/litre) • Door opening: H: 510 mm – W: 860 mm – D: 460 mm • Dimensions: Height: 2180 mm Width: 1310 mm Depth: 785 mm • Motor amp. power: 1,8 kW 5,1 A 3 phase – 400 V • Weight: 290 kg • Noise level: Year of construction: 2004
Parametry techniczne Wymiary maszyny: 4600 x 2500 x 1400 mm Wymiary beli: 970 x 760 x 1200 mm Rozmiar wlotu: 1050 x 680 mm Silnik: 7,5 kW Siła nacisku: 40 ton
Technical parameters • Automatic manual press • Press pressure 20 tons • Binding 4x vertical • Hydraulic door closing • Motor 7.5 kW • Height 180 cm • Length 320 cm • Width 120 cm • Bale 80×55 cm
• Length: 4.8 m • Width: 1.25 • Height: 2.1 • Loading opening: 1.2 x 0.48 • Package dimension: 0.5 x 0.3 • Weight: 3.5t • Engine: 18.5 kW • Oil heater • Oil cooler • Inspection door
Zagęszczarka do styropianu EPS firmy Abba • Typ 400 RP • Rok 2007 • Napięcie 11kW • Waga: 2600 kg • Wymiary bloku: 38x38cm • Wydajność: 100 kg/h • Gilotyna do cięcia długości • Cykl pracy: ręczny, automatyczny
Semi-automatic baler, horizontal press 800 Plus provides a throughput of 2 tons per hours which makes it perfect for waste processing plants. The machine has a crushing force of 75 tons, the knife cutting off the excessive material in the charging chamber, the floor made of wear-resistant steel, a bale full indicator and a three-phase motor with the power of 15 kW. Optionally, the baler may be equipped with additional devices, e.g.: a tippler for 1000 L containers, co-operating conveyor belt, extra security devices, etc. Horizontal binding system makes it perfect for baling plastic PET bottles and aluminum cans. The whole process of baling, apart from binding, takes place in an automatic cycle. Technical parameters: dimensions/ size of the baler (height x width x depth) 2805 mm x 1750 mm x 7050 mm weight of the baler 7800 kg inlet size (height x width) 1900 mm x 970 mm bale dime ...
Semi-automatic baler, horizontal press 600 Plus provides a throughput of 1,5 tons per hours which makes it perfect for waste processing plants. The machine has a crushing force of 50 tons, the knife cutting off the excessive material in the charging chamber, the floor made of wear-resistant steel, a bale full indicator and a three-phase motor with the power of 15 kW. Optionally, the baler may be equipped with additional devices, e.g.: a tippler for 1000 L containers, cooperating conveyor belt, extra security devices, etc. Horizontal binding system makes it perfect for baling plastic PET bottles and aluminum cans. The whole process of baling, apart from binding, takes place in an automatic cycle. Technical parameters: dimensions/ size of the baler (height x width x depth) 2725 mm x 1435 mm x 5735 mm weight of the baler 6000 kg inlet size (height x width) 1370 mm x 720 mm bale dim ...
Semi-automatic baler horizontal press 400 Plus is suitable for processing the material to an average of 1 ton per hour. The machine is ideal for industrial plants producing high quality material in the relative small amounts. When the disc presses projecting entirely to the door 400 Plus press produces a very compact bales with dimensions and weight comply with the requirements of the mill. Bale can be completely discharged from the chamber after binding, facilitating switching between materials. Vertical binding system makes the machine is easy to use, quick to bind and suitable for setting along the wall. Technical parameters: dimensions/ size of the baler (height x width x depth)2400 mm x 1750 mm x 4630 mm weight of the baler 5000 kg inlet size (height x width) 820 mm x 930 mm weight of a bale 200 – 400 kg bale wiring wire tape or string number of wires 4 bin ...
MOROS GC-L TYPE 101 car body press. Powered by an internal combustion engine, mounted on a semi-trailer, crane included. Renovation required. The press is currently in Norway, ready to be imported.
The BTS-MF60 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 60 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 60 kg (material depending) Bale size: 800 H (var.) x 700 W x 500 D mm Machine size: 1996 H x 1040 W x 720 D mm Machine weight: 260 kg Transport height: 1996 mm Loading aperture: 700 W x 492 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise le ...
The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy ...
• Length: 4.8 m • Width: 1.25 • Height: 2.1 • Loading opening: 1.2 x 0.48 • Package dimension: 0.5 x 0.3 • Weight: 3.5t • Engine: 18.5 kW • Oil heater • Oil cooler • Inspection door
• Bale dimension 200 x 200 x resultant dimension • Load capacity 125 tonnes • Work cycles: manual, automatic • 15 kW motor • Opening: 700 x 110 x 600 • Width x height x length – 3000 x 1800 x 3200 • Weight 5500 kg Year of construction 2019
Year: 2005 Motor: 4Kw (5.5hp) Pressure: 58 tons Case opening: 600 mm Case depth: 1190 mm Bales: 1.20 X 0.90 X 0.70 Approximate weight: 400-500 Kg. Others: Automatic return of the press plate for ease of use
Vertical baler Dixi 50 S, built in 2020, very good condition Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2020 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good, mint condition. The seals on the 2 cylinders for the retaining clamps have been replaced. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are ...
Mertens & Frowein GmbH
