Manufacturer:
(Category: 502)
3. Compaction – Final compaction: 3.400 kN, Door cylinder force: 600 kN, Feeding opening press housing (L×W): 1.950 × 1.420 mm, Degree of compaction: approx. 44 %, operating hours: 29.400 h
3. Compaction – Final compaction: 3.400 kN, Door cylinder force: 600 kN, Feeding opening press housing (L×W): 1.950 × 1.420 mm, Degree of compaction: approx. 44 %, operating hours: 17.400 h
Baler Avermann, type AVOS 1411 – 37/60, press force 60 t, year of construction 1994, good condition, with conveyor belt Technical data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of Make: 1994 Engine hours: 21,900 Pressing force: 60 t Drive power: 37 kW Filling opening: 1,400 x 1,100 mm Idle flow rate: 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350-550 kg Binding: 4-fold vertical, automatic Conveyor belt length: approx. 9000 mm Machine dimensions: approx. 6000 x 1700 x 3730 mm (LxWxH) Machine weight: approx. 12,000 kg Note: The press is still set up and can be visited under power on request. Dismantling and loading are not included in the scope of delivery. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided o ...
Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of construction 2019 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil The press is in good condition. It has been checked and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visi ...
Just Arrived Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of construction 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2020 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee ...
Baler Dixi 60 SLS, year of manufacture 2013 Technical data: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: paper, cardboard, foil The press is in good, working condition and has been inspected and tested by us. You can find the video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without ...
Filling box: 1.200 × 1.000 mm, Length of press chamber: 1.900 mm, Wide press chamber: 1.000 mm, Deep press chamber: 400 mm, Prepress force: 150 t, End pressing force: 250 t, Sliding door crane: 25 t, Control: Rexroth Logic Control Block, oil cooling motor: 2,2 kW, Cooling pump performance: 195 l/min
Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Technical data: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We ...
: neu : 2025 : 070096 : prompt, Zwischenverkauf v : Türkei : 28800 €: 550.08 €: 1 : 20 to: 1.7 mm: 360 mm: 550 mm: 140 mm: 1 - 50 mm: 160 1/min: 4 : 40 mm: 35 mm: 200 mm: 240 mm: 2.2 kW: 1360 mm: 1100 mm: 1860 mm: 1250 kgwelded steel construction body frame4-fold ram guidepneumatic clutch-brake combinationphotocell light barriersmechanical overload protectiontwo hand and foot pedal controlmanual adjustable strokemanual central lubricationaccording to CE rulesINCL. OPTIONAL INVERTER FOR CONINOUS SPEED SELECTIONOPTION: Vibration pads € 132,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 92600 €: 1750.14 €: 160 to: 6 mm: 750 mm: 1100 mm: 230 mm: 1 - 172 mm: 45 1/min: 6 : 100 mm: 80 mm: 375 mm: 540 mm: 11 kW: 1890 mm: 1950 mm: 3650 mm: 15500 kgWelded steel construction body frameCrankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precisionSnBz-12 quality bronze to bearings, grinded for min surface resistanceRam supported from 6 sidesPneumatic counter-balancing of the ram7", touchscreenGears in oil bathPneumatic clutch-brake combinationPLC control for safetyPhotocell light barriersMotorized slide adjustableMechanical overload fuseTwo hand and foot pedal controlAdjustable stroke (inverter)automatic centrallubricationMachine and equipment in conformity with CE-regulations(sample photos)OPTIONS: vibration pads € 192,00 bolster plate o.r. hydr. overload safety device o.r.etc.The data for this ad was c ...
Alko Clean Air Extraction System Mobil Jet 250 on Weima Briquette Press TH200 Press and extraction system overhauled by a specialist Press 100 L hydraulic oil changed Extraction system filler completely replaced Execution: Two-part (due to transport and insertion) Chip space elevation Extraction system with extinguishing device (newly filled) Control with machine detection and slide control Press: 831 operating hours (extraction even less) Control: Automatic and manual control (control of the individual cylinders possible by hand!) Height: 2800 mm Length: 2300 mm Width 1100 mm Operating instructions and circuit diagrams available Loading with forklift possible. Call and make an appointment for a viewing
Technical data Maximum pressure: 9 tons Year of Make: 2010 Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power connection: 400 V/ 50 Hz Machine is fully functional after technical supervision. Feel free to contact us! Machine is fully functional after technical supervision.
Technical data Maximum pressure: 26 tons Power connection: 400 V/ 4.6 kW Press force: 2.7 kg/cm² Year of Make: 2016 Bale size: 1200x800x1150 mm Bale weight: approx. 400-450 kg Price: on request Machine is fully functional, after technical supervision and renovation.
Technical data Maximum pressure: 24 tons Power connection: 400V / 4kW Press force: 2.5 kg/cm² Year of Make: 2012 Bale size: 1200x800x1000 mm Price: on request Bale weight: approx. 400 kg Machine is fully functional after technical supervision. There is a possibility to order the machine with paint renovation. For more information, please contact us by email or phone!
Technical data: Maximum pressure: 60 tons Year of Make: 1999 Press force: 72.7 t/cm² Number of Bindings: 4 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1400 mm Bale weight: 450-650 kg Weight: approx. 20 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance If you have any further questions about this or similar channel balers, please do not hesitate to contact us by email or phone!
Specifications: Maximum pressure: 18 tons Power connection: 400 V/ 4 kW Pressing force: 2.34 kg/cm² Year of Make: 2009-2013 Bale size: 1100x700x700 mm Price: on request Machine is fully functional after technical supervision and paint renovation.
In the pipeline Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2021 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2021 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, cardboard The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex w ...
In the pipeline Baler Dixi 60 SLD, built in 2012 Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 60 SLD Year of Make: 2012 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (WxL) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (WxHxL) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine weight: approx. 5,420 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
In the pipeline Baler Dixi 60 SLD, built in 2016 Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 60 SLD Year of Make: 2016 Drive power: 7.5 kW, 400 V / 32 A Filling opening: 990 x 1,110 mm (WxL) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (WxHxL) Bale weight: approx. 370-410 kg Binding: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (LxWxH) Machine weight: approx. 5,420 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
Specifications: Maximum pressure: 40 tons Year of Make: 2007 Pressing force: 63 tons/m² Oil tank: 600l Bale weight: 300-400 kg Weight: approx. 7.6 tons Power connection: 400 V/ 15 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers
Specifications Maximum pressure: 32 tons Pressing force: 4.33 kg/cm2 Number of bindings: 4 horizontal Channel cross-section: 820 x 900 x reg mm Dimensions of the tailgate: 82 x 135 cm Bale weight: bos 400 kg Weight: approx. 6.1 tons Power connection: 380 V/ 22 kW Bale tying: automatic
Vertical baler HSM VL 600, built in 2002 Specifications: Manufacturer: HSM Type: HSM VL 600 Year of Make: 2002 Pressing force: 60 t Drive power: 7.5 kW Idle cycle time: 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials: paper, cardboard, foil Remark: The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.
In the pipeline: Baler Dixi 60 SLS, year of manufacture 2013 Specifications: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: PET, paper, cardboard, foil The operating instructions and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.
Maximum pressure: 50 tons Year of Make: 2006 Pressing force: 65 tons/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1000 mm Dimensions of the tailgate: 920 x 1400 mm Bale weight: 350-500 kg Weight: approx. 13 tons Power connection: 400 V/ 22 kW Bale tying: automatic
Width: 1,400 mm, Height: 1,120 mm, Length: 2,450 mm, Package cross-section: 300 x 300 mm, Drive power: 2 x 90 kW, Working pressure: 290 bar, Max. working pressure: 300 bar, Year of construction: 1986, Weight: approx. 50 t
In the inlet: Presto CC 40 M baler with lift-tilt device Specifications: Manufacturer: Presto Type: CC 40 M Year of Make: 2017 Press force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-ply, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t(h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: paper, cardboard, foil Remark: Fully automatic regulating channel outlet, lift-tilt device for MGB 660, 770 and 1100 L empty containers. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any tim ...
used baler Manufacturer: ABBA Type: ACOMAT 400 H3A Year of Make: 2008 specifications: Press force: 45 t Drive power: 7.5 kW Throughput capacity: approx. 45 m³/h Filling opening: 1,150 x 850 mm Channel format: 790 x 730 mm (W x H) Bale size: 790 x 730 x length in mm (W x H x L) Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Machine dimensions: approx. 4,250 x 2,580 x 2,000 mm (L x W x H) Machine weight: approx. 3,600 kg
Good day We hereby offer you a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Presona AB, Sweden Type LP 85 VH1 Year of construction 2014 Total operating hours, 37,565 hours, as of March 2025 Press force main press 85 t Specific pressing force 100 N/cm² Press force pre-press flap 28 t Dimensions of the insertion tray 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW 5-fold vertical bonding Hydraulic oil tank volume 1,000 L Press dimensions built up with hopper 10,350 x 2400 x 3,150 mm (L x W x H) Machine weight press approx. 25 t Hint: The machine was ...
with 3 compression chambers, from 30 t to 150 t material quantities per year, vertical, for cardboard, foils, canisters, PET bottles, 200 kN, volume reduction up to 90%, ball weight 250 kg,
Brand: JOVISA Model No.: HC-2/40 Year: 2011 Engine: 25 hp (18.5 kw) Refurbished 2020 Automatic vertical tying 40 tons of force 800x700 bales Weight:500 kg
Tomcat Trading GmbH
