press used for sale

mobile compressed air with stainless steel sheets metrics: Length: 1.44 m Width: 0.36 m Height: 0.16 m

150 ton x 4000mm

For sale automatic press PTV 65 produced from SACMI Italy for ropp caps. Tools for 25mm and for 28mm ropp caps.

BAYKAL APHS 31440 CNC hydraulic press brake was built in 2020 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine, designed for machining sheet metal with a maximum length of 3100 mm, is distinguished by its high precision, efficiency and reliability. Throughout its entire service life, the machine was used for only 43 hours. Thanks to full electronic synchronisation with proportional valve technology, the installed CNC control constantly monitors and corrects the parallelism of the beam. The use of this solution maximises the accuracy and repeatability of the bending workpieces. The workspace, in turn, is protected by the FIESSLER AKAS laser safety system, which automatically stops the machine if the laser beam is interrupted. All this is complemented by a design made from high-grade ST44-2 steel, which maintains maximum stability during even the most intensive challenges. ...

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

Apple belt press SBP 820 from the manufacturer VORAN Strip width: 820 mm Working width: 600 mm Machine dimensions (LxWxH): 3230 x 1605 x 2020 mm Machine weight: 1800 kg Working Speed: 0.8 - 3.3m/minute Contact time: 5.5 - 1.4 minutes Drive: infinitely variable 1.5 kW Material: Stainless Steel Nominal capacity: up to 6 t/hour Year of brush cleaning: 2003 - Yield approx. 72% - Overall length 3230 mm, total width 1605 mm, height 2020 mm - 4 clamping / control motors of 0.37 kW each - 2 car wash motors of 0.12 kW each - Total energy consumption approx. 1.0 kW / hour, water consumption approx. 10 l / minute Integrated brush cleaning of the sieve belts, additional connection of an external HD cleaner available Car wash WAR 65: - Maximum grinding capacity: 6 t / hour - Screw diameter: 320 mm - Worm motor power: 2.2 kw - Mill motor power: 5.5 kw - Weight: 423 kg  ...

Rotary tablet press without machine signs with 2 stamp sets 12 and 14 mm 22 kg per hour, with powder mixer both are functional

pressure vessel Brand:Udo Kleusberg Type: 448 Year of construction: 2003 Volume: 15o liters Pressure: 11 bar All information without guarantee

Press Walter

PRESSURE GAUGE DENKI” DK-1-3X2-1/2PT

danfoss pressure transmitter mbs 3000

NOTE additionally a new shaft Description Force , 4000 TN Slide stroke, mm 400 Number of continuous slide stroke, stroke / min 50 Closed height of stamping space mm 1000 Adjusting the table mm 15 Distance between columns in light,mm 1660 Drive power, kW 185 Table dimensions in plan mm: - From left to right in 1620 - Front-to-back in 1570 Dimensions in mm: - in the plan 6100 x 4710 - Height above floor level 6820 - Press height 8680 Weight, t 377

Description: Hydraulic single-column press with cycle feed Type: HEP 100 Specifications Electrical connection: 400 volts/50 Hz +/- 3 % Drive power: 5.5 kW Total power requirement: approx. 6.5 kW Control voltage: 24 volts/50 Hz +/- 3 % Hydr. Max. connection: 210 bar Set: 200 bar Performance data Ram speeds AB: approx. 48 mm/sec. at max. 100 kN compressive force Working speed AB reduced adjustable to: approx. 10 mm/sec. at max. 100 kN compressive force Ram speed ON approx. 96 mm/sec. at max. approx. 50 kN retraction force Plunger stroke: max. 200 mm Flow rate of the pump: approx. 15 l/min.

Presona LP 85 VH2 cross-tying baler, built in 2018 Specifications: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-fold vertical, 3-fold horizontal Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg The press was dismantled from ongoing operations. A spare parts package is included. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subje ...

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

JORDI PHE-30180 CNC hydraulic press brake was built in 2013 in Spain by JORDI UNIVERSAL V.S.L. The machine, designed for precision machining of sheet metal with a maximum length of 3550 mm, is an excellent choice for any industrial plant. The combination of a high press force of 175 tonnes and an extremely stable design guarantees the best bending results, even during the most intensive challenges. All this is complemented by an intelligent CNC control with all the necessary functions. The PHE-30180 CNC press brake weighs 11000 kg. Technical specifications of the JORDI PHE-30180 press brake - CNC controller: ESA 530 - maximum press force: 175 t - maximum sheet metal length: 3550 mm - maximum slider stroke length: 265 mm - distance between columns: 2600 mm - top tool weight: 55 kg - bottom tool weight: 66 kg - light curtains - foot switch control - oil tank capacity: 250 l - ...

PAD 63 A high-speed press was built in 1978 in Poland by Fabryka Pras Automatycznych Warszawa-Włochy. The machine is used for precision machining of uncoiled sheet metal. All machining processes, i.e. stamping, punching, cutting and bending are performed fully automatically with a high press force of 63 tonnes. The PAD 63A high-speed press on offer has undergone an overhaul. The total weight of the machine is 6300 kg. Technical specifications of the PAD 63 A press - maximum press force: 63 t - slider stroke number: 100-320/min - slider adjustment: 60 mm - maximum distance from work table to slider surface: 320 mm - distance between columns: 480 x 400 mm - motor power: 15 kW - grease pump motor power: 0,4 kW - weight of the PAD 63 A machine: 6300 kg

pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1000,400 mm pneumatic clamping: 2 St. moveable: Option For quick pressing of Minizinken- or Soflineverbindungen - Independent of the angle - Particularly suitable for arched manufacturing in window - Table size 1000 x 400 mm - Pneumatic connector 10 bar - Air consumption: 0.5 cdm / stroke - Two clamping cylinders for workpiece clamping - Right half of the table stored on hardened shafts via linear ball bearings - 1 pressure cylinders for linear displacement table - CE - execution (technical data according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t chamfer lenght: 3050 mm distance between columns: . mm Control: Cybeleg type: DNC880S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 Chamber Press – Waste Press Strautmann MK 1100 used Features • Manufacturer: Strautmann • Type: MK 1100/3 • Condition: Used goods, see photos • Colour: Green • Dimensions: 3600 x 1000 x 2700 mm • Net weight: 2000 kg • Connection: 4 kW, 400 V, 50 Hz • Press force: 200 kN • Year of manufacture: 2000 Price € 4.900,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at all times (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

press capacity: 250 t spindle diameter: 160 mm ram stroke range: 180 mm stroke speed: 71 Hub/min column daylight: 450 mm table surface area: 560x450 mm ram surface: 450x400 mm total power requirement: 12 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic wit ...

1015 KW Dresser counterpressure steam turbine for sale. 35.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. TUBRINE Brand: DRESSER-RAND (Nadrowski) Type: AVT 72 TW 17 Number: 16225-1 Electr. Power: 1015 KW Rated power: 1375 kVA Year of construction: 1995 (control units upgraded in 2008) Voltage: 400 V RPM: 1500 rpm Steam flow rate: 25 tons /h Dimensions (l x w x h): 4.50 x 2.40 x 2.30 m Inlet temperature: 253°C Inlet pressure : 18 bar Exhaust temperature : 152°C Outlet pressure : 5.0 bar Steam flow rate at the entrance: 25 tons/h Turbine weight: 11,000 kg Generator Brand: Leroy Somer Type: NWR 50 BL10-4P Electrical power : 1015 KW SWITCHBOARD Manufactured by TIL SA and updated in 2008 Schneider control

: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 1.000 kN heating plates:: 500 x 500 mm electrically heated:: °C heating power:: kW piston stroke:: ca. 500 mm no. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Good day We hereby offer you a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Presona AB, Sweden Type LP 85 VH1 Year of construction 2014 Total operating hours, 37,565 hours, as of March 2025 Press force main press 85 t Specific pressing force 100 N/cm² Press force pre-press flap 28 t Dimensions of the insertion tray 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW 5-fold vertical bonding Hydraulic oil tank volume 1,000 L Press dimensions built up with hopper 10,350 x 2400 x 3,150 mm (L x W x H) Machine weight press approx. 25 t Hint: The machine was  ...

Output (caps/min): 1500

pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In the inlet: Presto CC 40 M baler with lift-tilt device Specifications: Manufacturer: Presto Type: CC 40 M Year of Make: 2017 Press force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-ply, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t(h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: paper, cardboard, foil Remark: Fully automatic regulating channel outlet, lift-tilt device for MGB 660, 770 and 1100 L empty containers. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any tim ...

In the pipeline: Baler Dixi 60 SLS, year of manufacture 2013 Specifications: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: PET, paper, cardboard, foil The operating instructions and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

Buhler DMWP flake mill, 1000x600, complete with electric motor

Whisper compressor Planet Air double piston; as good as new condition; double pistons; 8 bar; Boiler 50 liters. Whisper compressor Planet Air double poppet; condition as new; double poppet; 8 bar; tank 50 liters.

Bread Press Fortuna Automatic A 3 H + Dough dividing and rounding machine Bread Press TOP Model Fortuna Automat Gr. 3+ with active shutdown Intervention protection with protective corners Head cleaning to the rear electrically Part head with stainless steel knife Dough insert up to 2400g depending on TA Dough divider with 3 knitting plates Connection 400V,16A-CEE plug Dimensions: 720 x 800 x 1510 mm WxDxH Used machine + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Cast Plate Service Package Maintenance contract E-Box for more safety Delivery Instruction & Commissioning

- Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 1800 kg

Exhibition machine MOVE - the high-precision vacuum press with a gigantic usable surface for vacuum form gluing and vacuum veneering of bent workpieces. With total flexibility, due to total mobility and revolutionary folding mechanism, to reduce the footprint to 45% when folded. High-precision vacuum press with flap opening incl. ⦁ Revolutionary folding mechanism (reduction of the footprint to 45%) ⦁ 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) optional, automatic shutdown when pressure is reached (with large vacuum volume) ⦁ Pressure regulation 400 to 900 mbar, analog vacuum pressure display ⦁ Highly elastic natural rubber membrane (up to +130 °C) ⦁ Diaphragm quick-change system ⦁ Stable phenolic resin worktop (up to +160 °C) ⦁ Gas pressure damper for flap opening ⦁ Vacuum pressure display ⦁ Connection for external vacuum bag ⦁ Smo ...

- Pressing force: 1000 kN pressure: 289 bar - Piston stroke: 300 mm - Downward speed: 10.5 mm/s - Working speed: 2.7 mm/s - Return speed: 15 mm/s - Passage: 1050 mm - Table dimensions: 1030 x 460 mm - Table height adjustment: 600 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 110 mm - Guide piston Ø: 60 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2000 x 2150 x 900 mm - Weight: 1250 kg

ManuMatik / KraussMaffei High Pressure Cylinders The high-pressure cylinders come from a commutator press and were used there until the end. Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are also installed Check Valves z2S16-1-51 Pressure Reducing Valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x pressing unit Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Speck P52/30-500 30l/min. at 500bar (year of construction 12/16) - Motor: Electric 30kW - 400l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs - Dimensions with 400l water tank: approx. 1,250 x 1,510 x 1,260 - Empty weight: approx. 700 kg - Year of construction: 2009, new high-pressure pump12/2016 - Operating hours: approx. 1500 h

Vertical baler HSM VL 600, built in 2002 Specifications: Manufacturer: HSM Type: HSM VL 600 Year of Make: 2002 Pressing force: 60 t Drive power: 7.5 kW Idle cycle time: 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials: paper, cardboard, foil Remark: The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.

Skid similar but no Dynajet, Oertzen, Falch, DIBO, ... S500-30E-C - High pressure pump: Falch xs31.1-30-500 30l/min. at 500bar (year of construction 01/08) - Motor: Electric 30kW - 1250l water tank - Pressure gauge - Pressure regulator - Safety valve - Powder-coated steel frame - Aluminium covers - Forklift tabs and crane eyelets - Dimensions with 1250l water tank: approx. 1,100 x 1,760 x 1,770 - Empty weight: approx. 1,500 kg - Year of construction: 2013 - Operating hours: approx. 1500 h

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

Polystyrene compressor Styropactor MAXI | Shredder press for Polystyrene EPS Compressor, combination of shredder and press for polystyrene EPS MAXI Commodity number: 42055 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 70-90 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 100-120 Connection: 7.5kW, 3-phase 400V/50Hz 480V/60Hz Insertion opening: 600×1000 mm Length: 3180 mm Height: 1600 mm Width: 870 mm MAXI PLUS Commodity number: 42060 Throughput: Measured with fish crates of 25 KG/M3 Material space weight EPS: 110-130 kg/h Throughput measured in fish crates with lid (650 grams per piece and about 800x400x220mm): 170-200 boxes/h Connection: 11kW, 3-phase 400V/50Hz, 480V/60Hz Insertion opening: 600×1000 mm Length: 3680 mm Height: 1600 mm Width: 870 mm Wet boxes: YES Stainless stee ...

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

Baler V8 | 8t pressing force. Press for cardboard, foil, paper. V8 MEDIUM-SIZED BALER Our V8 baler is versatile and offers medium-sized companies that need to process a range of materials, including bulky objects and packages of different sizes, with excellent value for money. The V8 produces bales that fit perfectly on a Euro pallet and is suitable for pressing cardboard, plastic, textiles, paper, polystyrene and food waste Recommended for supermarkets, gas stations, department stores, hotels, factories and logistics centers. Bale size: 800 mm H × 950 mm W × 600 mm D Bale weight: 100–180 kg Pressing time: 33 seconds Pressing force: up to 8 tons Dimensions: 2270 mm H × 1100 mm W × 745 mm D Filling opening: 950 mm W × 485 Integrated bale ejection mechanism Weight: 425 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN  ...

Baler V20X | 20t press for cardboard, foil, paper, waste Baler, packaging press V20X | 006 With a pressing force of up to 25 tons, the V20X can efficiently compact cardboard, plastic, paper, textiles and food waste. Recommended for markets, department stores, hotels and all other users who have to deal with average amounts of waste and have to work at low ceiling heights. Bale size: 800 mm H (variable) × 1100 mm W × 750 mm D Bale weight: 200–300 kg Pressing time: 35 seconds Pressing force: up to 25 tons Dimensions: 1970 mm H × 1695 mm W × 865 mm D Filling opening: 1100 mm W × 625 mm H Integrated bale ejection mechanism Weight: 980 kg Power supply: Three-phase, 380/400 volt 3 kW motor Noise: 74 decibels DIN EN 16500 IP54 protection class E-Power Standards PLC light indicator "Bale full" and "Automatic pressing process"