british flag
Resale Logo

press used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information warehouse equipment  Lücht und Palm Handelsgesellschaft mbH  http://www.luecht-palm.de 
banner logo
start page > keywords press > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
122196718 301

ARBURG 320M 750-210 for sale
Injection molding machines


Injection moulding machine ARBURG 320 M 750 â 210 Machine data: Year of construction: 1990 Hours of operation: approx. 78.300 Cylinder/snail Ã?: 30 mm high wear strength 2 core cable with core it's cont ...
used machine
 
Injection moulding machine ARBURG 320 M 750 â 210
Machine data:
Year of construction: 1990
Hours of operation: approx. 78.300
Cylinder/snail Ã?: 30 mm high wear strength
2 core cable with core it's control to delay of the screw-in signal when screwing the threaded cores.
2015 was performed the last audit of the hydraulic lines and hoses still replaced.
The machine is still fully functional and is still daily in use.
Machine is sold as second-hand machine with traces of use, without guarantee or warranty.
The machine is free from February 2018!
1990
Price  
    request
122196713 107

DURMA AD-S 30135 for sale
CNC Pressbrakes


2016 MODEL 3MT 135 TONS 4 AXIS Y1 Y2 X R MOTORISED CROWNING DELEM 66 T CONTROL STANDART TOOL THE MACHINE IS ALMOST NOT USED AND IN VERY GOOD CONDITION
used machine
 
2016 MODEL

3MT 135 TONS

4 AXIS Y1 Y2 X R

MOTORISED CROWNING

DELEM 66 T CONTROL

STANDART TOOL

THE MACHINE IS ALMOST NOT USED AND IN VERY GOOD CONDITION
2016
37,000 €  
  TR   request
122196506 802

RYOBI 522 HX for sale


ACC (Aqua automatic control system) Color remote control CCI Ryobi Super dampener with EKO
used machine
 
ACC (Aqua automatic control system)
Color remote control CCI
Ryobi Super dampener with EKO
2000
Price  
    request
122196500 802

HEIDELBERG GTO52ZP+NP for sale


Varn Kompac dampening, Weko double sheet control, Numbering and perforating unit, 60mio
used machine
 
Varn Kompac dampening, Weko double sheet control,
Numbering and perforating unit, 60mio
1989
Price  
    request
122196496 802

HEIDELBERG MOZP-S for sale


Standard dampening works, 78 million
used machine
 
Standard dampening works, 78 million
1985
Price  
    request
122196494 831

POLAR 78 ES for sale
Paper cutters


Chrome air table photo cell side tables cards cut device
used machine
 
Chrome air table photo cell side tables cards cut device
2001
Price  
    request
122196471 401  

TETRA PACK Tetra Alex 30 for sale
Tetra Alex 30 Homogenisers


1-Tetra Homogeniser, Tetra Alex 30, Year of Manufacturing 2005, Capacity 6500-15000 kph, Pressure 200 bar, Incoming Pressure 3-10 bar, 400V, 50Hz, 132 kW 2-Tetra Homogeniser, Tetra Alex 30, Year of Manufacturing 2002, ...
used machine
 
1-Tetra Homogeniser, Tetra Alex 30, Year of Manufacturing 2005, Capacity 6500-15000 kph, Pressure 200 bar, Incoming Pressure 3-10 bar, 400V, 50Hz, 132 kW

2-Tetra Homogeniser, Tetra Alex 30, Year of Manufacturing 2002, Capacity 5400-15000 kph, Pressure 200 bar, Incoming Pressure 3-10 bar, 380V, 50Hz, 132 kW

3-Tetra Homogeniser, Tetra Alex 30, Year of Manufacturing 2004, Capacity 5400-15000 kph, Pressure 200 bar, Incoming Pressure 3-10 bar, 380V, 50Hz, 132 kW
2005
Price  
  PK   request
122168613 101

MORI SEKI SV 50 for sale
Numerically Controlled Machining Centres


Machining center - vertical MORI SEIKI SV 50 Nr. 1105-000802 category machining center - vertical make MORI SEIKI type SV 50 built in 1996 State second-hand machine control CNC MSC-518 8 storage location of the down's co ...
used machine
 
Machining center - vertical MORI SEIKI SV 50 Nr. 1105-000802 category machining center - vertical make MORI SEIKI type SV 50 built in 1996 State second-hand machine control CNC MSC-518 8 storage location of the down's country of origin Japan s ince immediately cargo base from site technical details x way 800 mm y way 510 mm z-way 510 mm control MSC-518 8 table size 1100 x 600 mm speed range 12000 RPM tool holder SK 40 - Milling spindle 22 kW tool changer - stations: 30 Stations tool change time 1 sec feed range 1-16 m / min rapid traverse 32 min high pressure pump Knoll, 70 bar total power 32 kW machine weight approx. 6.8 t space requirement of approx. 2, 4 x 2, 6 x 2, 850 m accessories chip conveyor description with 2 SPAENEFOERDERER
CNC MORY MSC 518 fanuc 18 M
WITH 4 + 5 NIKKEN TEIAPPARAT
GOOD CONDITION
1996
27,000 €  
    request
122168609 206

OTT 300K150 for sale
Veneering presses


Description: They provide here a super functional veneer press, the premium brand of Ott, which of course quality is 1 A. It is in good condition. There are small traces of use. This machine provides you with a precis ...
used machine
 
Description:

They provide here a super functional veneer press, the premium brand of Ott, which of course quality is 1 A. It is in good condition. There are small traces of use. This machine provides you with a precise and powerful processing. So easy, you can edit veneers.

Technical specifications: brand: Ott

Type: 300 K150

Year: 1974

Plate size: 3000 x 1500 mm

Press pressure 150 to

6 cylinder.

Opening height: 400 mm

1974
6,638 €  
    request
122168607 107

AMADA Vipros 255 for sale
CNC Punching Machines


OVERVIEW: Brand: AMADA Model: Vipros 255 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2005 Production hours: 39600 Location: India Origin country: ...
used machine
 
OVERVIEW:
Brand: AMADA
Model: Vipros 255
Application type: Punching
Machine type: Turret Punching Machine
Availability: Immediately
Construction year: 2005
Production hours: 39600
Location: India
Origin country: Japan
Delivery time: Immediate

GENERAL DATA:
Measurements width: 2500 mm
Measurements depth: 5100 mm
Measurements height: 2100 mm
Machine weight: 9800 kg

MAIN DRIVE:
Punching force: 200 kN
Maximum sheet thickness: 4 mm

CONTROL UNIT:
Brand: Fanuc
Model: 18 P

MOVEMENT:
X-AXIS:
Movement: 1250 mm
Y-AXIS:
Movement: 1270 mm

MAX MATERIAL THICKNESS:
Steel: 4 mm
Stainless steel: 2 mm
Aluminium: 2 mm

TOOLS:
No. of stations: 31
No. of index: 3
No. of clamps: 2

MEDIA:
Main electronic connection: 415 V / 3 P
Power consumption: 27 kVA
Air pressure: 6 bar

ADDITIONAL EQUIPMENT:
1 - Tools
2005
Price  
  IN   request
122168602 708

MTA TAEevo Tech 301 for sale
Refrigerating machines


65.7 kW, MTA chillers air-cooled, type: TAEevo tech 301 + P5 M.T.A. S.p.a.. TAEevo tech 301 are air-cooled chillers, which are suitable for outdoor installation. Including crankcase heater, phase monitoring, buffer tan ...
used machine
 
65.7 kW, MTA chillers air-cooled, type: TAEevo tech 301 + P5
M.T.A. S.p.a..
TAEevo tech 301 are air-cooled chillers, which are suitable for outdoor installation. Including crankcase heater, phase monitoring, buffer tank 350 liters and built-in P5 high-pressure circulation pump.

Cooling capacity kW 65.7
Cold water temperature outlet / inlet (°C): 7 / 12 flow rate (m3 /h) 11.3
Available pump pressure (bar) 4.8
Ambient temperature (°C) 32,.
Refrigerant R-410A.

Electrical data:
Voltage V 400, frequency Hz 50, stages of pH 3.
Maximum power consumption (kW) 32,97
Max current (A) 55,51
Starting current (A) 171,24
Protection class: IP54

Dimensions:
Length (mm) 866, height (mm) width (mm) 2250
Weight (kg) 1079
Connection RP 2 "
Serial No.: 2200300990
Built in 2017, State: Optical 1, technically 1
(Storage unit)

Used machines can have Visual defects due to their use.
(Subject to change and prior sale reserved!)
Location: MTA Deutschland GmbH, 41334 Nettetal
Price: On request euro (plus VAT from Nettetal), 12 months warranty
Chiller, water chiller, MTA
2017
Price  
    request
122168596 708

MTA TAEevo Tech 201 for sale


50 kW, MTA used chillers air-cooled, type: TAEevo tech 201 P3M.T.A. S.p.A. TAEevo tech 201 are air-cooled chillers, which are suitable for outdoor installation. Including crankcase heater, phase monitoring, buffer tank  ...

 
50 kW, MTA used chillers air-cooled, type: TAEevo tech 201 P3M.T.A. S.p.A.
TAEevo tech 201 are air-cooled chillers, which are suitable for outdoor installation. Including crankcase heater, phase monitoring, buffer tank 350 liters and built-in P3 pump.

cooling capacity of kW 50
Cold water temperature exit / entry (°C): 7 / 12
Volumenstrom (m³/h) 8.56
available pump pressure (bar) 2,69
Umgebungstemperatur (°C) 32
Refrigerant R 410A
Elektrcal data: voltage V 400, frequency Hz 50, phase pH 3
Max. power consumption (kW) 23,72
Max. Current (A) 39,9
Starting current (A) 13.47
protection class: IP54
length (mm) 2250, width (mm) 866, height (mm) (kg) 948

 
Price  
    request
122168567 106

Press Brakes


Auction name: Emaillerie Machines in Sint-Jans-Molenbeek Online auction Start of auction: 13 December 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 27 December 2017 15:00 GMT +0200 (Western Europe (DS ...
used machine
 
Auction name: Emaillerie Machines in Sint-Jans-Molenbeek


Online auction

Start of auction: 13 December 2017 17:00 GMT +0200 (Western Europe (DST)
Closing time: 27 December 2017 15:00 GMT +0200 (Western Europe (DST)

The price listed is an opening bid

To participate in the auction and for more information go to: BVA-Auctions
 
250 €  
  NL   request
122168550 206

JOOS for sale
Veneer press


electro hydraulic, heating up/down: 1.100 x 2,200 mm.

 
electro hydraulic, heating up/down: 1.100 x 2,200 mm.
 
Price  
    request
122168509 502

BECKER HY4/500 MP for sale
Scrap presses


Cutting force 500 to, cutting width up to 1000 mm, approx. 4 to 6 strokes per minute, feed pressure 120 to, main drive 165 KW, total weight 130 to
used machine
 
Cutting force 500 to, cutting width up to 1000 mm, approx. 4 to 6 strokes per minute, feed pressure 120 to, main drive 165 KW, total weight 130 to
1986
used machinery auction RESALE Price  
    request
122168499 107

AMADA ITPS II 5012 for sale
CNC Pressbrakes


Make: Amada Type: ITPS II 5012 Year of manufacture: 10/1998 Bending length: 1250 mm Pressing force: 50 to Control: Operator II Stroke: 100 mm Usable height: 370 mm Free passage of stand: 1020 mm Throat depth: 40 ...
used machine
 
Make: Amada
Type: ITPS II 5012
Year of manufacture: 10/1998
Bending length: 1250 mm
Pressing force: 50 to
Control: Operator II
Stroke: 100 mm
Usable height: 370 mm
Free passage of stand: 1020 mm
Throat depth: 400 mm
Delivery speed: 85 mm / s
Folding speed: 10 mm / s
Return speed: 80 mm / s
Working height: 960 mm
Length: 2400 mm
Width: 1745 mm
Height: 2030 mm
Weight: 2610 kg
1998
Price  
    request
122168496 107

BEYELER PR6 150/2050 for sale
CNC Pressbrakes


Make: Baker Type: PR6 150/2050 Year of construction: 2004 Bending length: 2050 mm Pressing force: 150 to Control: Cybelec ModEva 12 Stroke: 315 mm Throat depth: 400 mm Delivery speed: 100 mm / s Folding speed: 1 ...
used machine
 
Make: Baker
Type: PR6 150/2050
Year of construction: 2004
Bending length: 2050 mm
Pressing force: 150 to
Control: Cybelec ModEva 12
Stroke: 315 mm
Throat depth: 400 mm
Delivery speed: 100 mm / s
Folding speed: 1-10 mm/s
Return speed: 200 mm / s
Length: 2800 mm
Width: 2250 mm
Height: 2850 mm
Weight: 7500 kg

Controlled axes Backgauge: X 1-X 2-R-Z1-Z2
Safety device
2004
Price  
    request
122168492 107

AMADA ITPS II 5012 for sale
CNC Pressbrakes


Farbrikat: Amada Type: ITPS II 5012 Year of construction: 1998 Bending length: 1250 mm Pressing force: 50 to Control: Surgeon Hours of operation: 25000 h Stroke: 100 mm Usable height: 370 mm Free passage of stan ...
used machine
 
Farbrikat: Amada
Type: ITPS II 5012
Year of construction: 1998
Bending length: 1250 mm
Pressing force: 50 to
Control: Surgeon
Hours of operation: 25000 h
Stroke: 100 mm
Usable height: 370 mm
Free passage of stand: 1020 mm
Throat depth: 400 mm
Delivery speed: 85 mm / s
Folding speed: 10 mm / s
Return speed: 80 mm / s
Working height: 960 mm
Length: 2400 mm
Width: 1745 mm
Height: 2030 mm
Weight: 2610 kg
1998
Price  
    request
122168490 107

AMADA HFBO 100.3 for sale
CNC Pressbrakes


Make: Amada Type: HFBO 100.3 Year: 04/1996 Bending length: 3100 mm Pressing force: 100 to Control: Operator II Hours of operation: 85000 h Stroke: 200 mm Usable height: 470 mm Free stand passage: 2700 mm Throat ...
used machine
 
Make: Amada
Type: HFBO 100.3
Year: 04/1996
Bending length: 3100 mm
Pressing force: 100 to
Control: Operator II
Hours of operation: 85000 h
Stroke: 200 mm
Usable height: 470 mm
Free stand passage: 2700 mm
Throat depth: 420 mm
Delivery speed: 100 mm / s
Folding speed: 10 mm / s
Return speed: 100 mm / s
Working height: 960 mm
Length: 3680 mm
Width: 2185 mm
Height: 2540 mm
Weight: 6800 kg
1996
Price  
    request
122168486 107

AMADA HFBO 220.3 for sale
CNC Pressbrakes


Make: Amada Type: HFBO 220.3 press Year of construction: 1996 Bending length: 3340 mm Pressing force: to 220 Control: Operator II, 8 controlled axes Stroke: 180 mm Usable height: 450 mm Free stand passage: 2700 m ...
used machine
 
Make: Amada
Type: HFBO 220.3 press
Year of construction: 1996
Bending length: 3340 mm
Pressing force: to 220
Control: Operator II, 8 controlled axes
Stroke: 180 mm
Usable height: 450 mm
Free stand passage: 2700 mm
Throat depth: 410 mm
Delivery speed: 100 mm / s
Folding speed: 7.5 mm / s
Return speed: 75 mm / s
Working height: 960 mm
Length: 3750 mm
Width: 2200 mm
Height: 2940 mm
Weight: 13000 kg
1996
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country