press forging used for sale

Key data: 3 t, 150 mm

For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts

Pressure plate intermediate table Grafoteam MDT 260 C; condition overhauled; 2 pieces available; Arm length 780mm; Max. Plate size 780x820mm. Plate conveyor Grafoteam MDT 260 C; condition rebuilt; 2 pic. on stock; arm lenght 780mm; max.plate size 780x820mm.

EKOTON PRODEKO-EŁK GK-8.230.20.H filter press was built in 2018 in Poland by PRODEKO-EŁK. The machine is used for the economic dehydration of sludge, based on the principle of filtering solids from the liquid. The slurry pumped in flows through chambers with filter plates, on which the solids are retained. The sludge that accumulates in this way forms a so-called filter cake”, which, after filling the space of the chambers, falls out into a container or onto a conveyor. The use of this solution significantly minimises waste disposal costs in many industrial sectors, such as the metallurgical industry, chemical industry and mining. The GK-8.230.20.H membrane filter press weighs 37000 kg. The offered PRODEKO-EŁK KMF GK-8.230.20.H chamber filter press is fully complete and consists of the following parts: – support structure with platforms – tank for clean water – pressure  ...

Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of continuous strokes per min: 10 The highest frequency of single strokes per min: 7 Closed height: 1180 mm Adjustment of closed height: 200 mm Slider's dimensions: -From left to right: 5000 mm -From front to back: 2000 mm Dimensions of the plate of the die: -From left to right: 5000 mm -From front to back: 2000 mm Capacity of the main drive: 250 kW Overall dimensions: -From left to right: 7640 mm -From front to back: 5980 mm -Height above floor level: 10490 mm

FETTE TABLET PRESS 2090 Year of manufacturing: 2003 High speed tablet press. Operating area enclosed within four double walled Perspex safety guards. double walled Perspex safety guards • the product to be filled is placed in a stainless steel hopper and guided through a Fill-O-Matic motorised powder feeder into the mould cavities, which can be easily dismantled for cleaning • can be connected to an external dust extraction system via connection ports in the upper part of the housing PRODUCTION • works with interchangeable moulds • can produce capsule shaped tablets • Production: 216,600 tablets/hour (max; with turret installed) • Tablet dimensions: up to 25 mm Ø (max) • Tablet thickness: 8.5 mm (max) Number of stations: 29 • Compression: 100.0 kN (max) • Pre-compression: 100.0kN (max) • Filling depth: 18.0 mm (max; with suitable cam) • Rotation speed: ...

automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 V5/H3/So Hours: 85 hours Year of Make: 2022 specifications: Length of the channel baler: approx. 13,500 mm Width of the channel baler: approx. 2,400 mm Height of the channel baler: approx. 3,400 mm Weight of the channel baler: approx. 47,400 kg Filling opening: 1,020 x 1,600 mm Channel cross-section height x width: 750 x 1,100 mm Bale weight depending on length and material 600 - 900 kg Press force plunger: 1,000 kN at 260 bar Cutting force: 1,200 kN at 315 bar Electrical data: Operating voltage: 400 V/3 PE Frequency: 50 Hz Voltage tolerance: +/- max. 5% Degree of protection: IP 55 Control: Siemens S7 1.500 with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h. Pumps on pump plate completely piped and install ...

BAYKAL APHS 31440 CNC hydraulic press brake was built in 2020 in Turkey by BAYKAL MAKINA SANAYI VE TICARET A.Ş. The machine, designed for machining sheet metal with a maximum length of 3100 mm, is distinguished by its high precision, efficiency and reliability. Throughout its entire service life, the machine was used for only 43 hours. Thanks to full electronic synchronisation with proportional valve technology, the installed CNC control constantly monitors and corrects the parallelism of the beam. The use of this solution maximises the accuracy and repeatability of the bending workpieces. The workspace, in turn, is protected by the FIESSLER AKAS laser safety system, which automatically stops the machine if the laser beam is interrupted. All this is complemented by a design made from high-grade ST44-2 steel, which maintains maximum stability during even the most intensive challenges. ...

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeum ...

Apple belt press SBP 820 from the manufacturer VORAN Strip width: 820 mm Working width: 600 mm Machine dimensions (LxWxH): 3230 x 1605 x 2020 mm Machine weight: 1800 kg Working Speed: 0.8 - 3.3m/minute Contact time: 5.5 - 1.4 minutes Drive: infinitely variable 1.5 kW Material: Stainless Steel Nominal capacity: up to 6 t/hour Year of brush cleaning: 2003 - Yield approx. 72% - Overall length 3230 mm, total width 1605 mm, height 2020 mm - 4 clamping / control motors of 0.37 kW each - 2 car wash motors of 0.12 kW each - Total energy consumption approx. 1.0 kW / hour, water consumption approx. 10 l / minute Integrated brush cleaning of the sieve belts, additional connection of an external HD cleaner available Car wash WAR 65: - Maximum grinding capacity: 6 t / hour - Screw diameter: 320 mm - Worm motor power: 2.2 kw - Mill motor power: 5.5 kw - Weight: 423 kg  ...

Press Walter

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL

PRESSURE GAUGE DENKI” DK-1-3X2-1/2PT

250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!

mobile compressed air with stainless steel sheets metrics: Length: 1.44 m Width: 0.36 m Height: 0.16 m

150 ton x 4000mm

For sale automatic press PTV 65 produced from SACMI Italy for ropp caps. Tools for 25mm and for 28mm ropp caps.

danfoss pressure transmitter mbs 3000

Stationary high-pressure pump unit Hammelmann HDP 122 on base frame without motor. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Operating pressure: 530 bar Flow rate: 55 l / min. Drive speed: 1500 rpm. Drive power: 55 kW without engine, with pressure control valve, Bwfz23o8wi with safety valve, with oil cooling system. Dimensions LxWxH: approx. 2000x1000x1400 mm Weight: approx. 300 kg Year of construction: 1998 Condition: in good used condition.

Description: Hydraulic single-column press with cycle feed Type: HEP 100 Specifications Electrical connection: 400 volts/50 Hz +/- 3 % Drive power: 5.5 kW Total power requirement: approx. 6.5 kW Control voltage: 24 volts/50 Hz +/- 3 % Hydr. Max. connection: 210 bar Set: 200 bar Performance data Ram speeds AB: approx. 48 mm/sec. at max. 100 kN compressive force Working speed AB reduced adjustable to: approx. 10 mm/sec. at max. 100 kN compressive force Ram speed ON approx. 96 mm/sec. at max. approx. 50 kN retraction force Plunger stroke: max. 200 mm Flow rate of the pump: approx. 15 l/min.

Rotary tablet press without machine signs with 2 stamp sets 12 and 14 mm 22 kg per hour, with powder mixer both are functional

pressure vessel Brand:Udo Kleusberg Type: 448 Year of construction: 2003 Volume: 15o liters Pressure: 11 bar All information without guarantee

Presona LP 85 VH2 cross-tying baler, built in 2018 Specifications: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-fold vertical, 3-fold horizontal Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg The press was dismantled from ongoing operations. A spare parts package is included. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subje ...

NOTE additionally a new shaft Description Force , 4000 TN Slide stroke, mm 400 Number of continuous slide stroke, stroke / min 50 Closed height of stamping space mm 1000 Adjusting the table mm 15 Distance between columns in light,mm 1660 Drive power, kW 185 Table dimensions in plan mm: - From left to right in 1620 - Front-to-back in 1570 Dimensions in mm: - in the plan 6100 x 4710 - Height above floor level 6820 - Press height 8680 Weight, t 377

JORDI PHE-30180 CNC hydraulic press brake was built in 2013 in Spain by JORDI UNIVERSAL V.S.L. The machine, designed for precision machining of sheet metal with a maximum length of 3550 mm, is an excellent choice for any industrial plant. The combination of a high press force of 175 tonnes and an extremely stable design guarantees the best bending results, even during the most intensive challenges. All this is complemented by an intelligent CNC control with all the necessary functions. The PHE-30180 CNC press brake weighs 11000 kg. Technical specifications of the JORDI PHE-30180 press brake - CNC controller: ESA 530 - maximum press force: 175 t - maximum sheet metal length: 3550 mm - maximum slider stroke length: 265 mm - distance between columns: 2600 mm - top tool weight: 55 kg - bottom tool weight: 66 kg - light curtains - foot switch control - oil tank capacity: 250 l - ...

PAD 63 A high-speed press was built in 1978 in Poland by Fabryka Pras Automatycznych Warszawa-Włochy. The machine is used for precision machining of uncoiled sheet metal. All machining processes, i.e. stamping, punching, cutting and bending are performed fully automatically with a high press force of 63 tonnes. The PAD 63A high-speed press on offer has undergone an overhaul. The total weight of the machine is 6300 kg. Technical specifications of the PAD 63 A press - maximum press force: 63 t - slider stroke number: 100-320/min - slider adjustment: 60 mm - maximum distance from work table to slider surface: 320 mm - distance between columns: 480 x 400 mm - motor power: 15 kW - grease pump motor power: 0,4 kW - weight of the PAD 63 A machine: 6300 kg

Press brake TRUMPF TrumaBend V 85 Year of construction 1999 Machine specifications: working length 2050 mm - Stand passage 1750 mm - pressing force 850 kN - Distance table / plunger 410 mm - Stand projection 410 mm - Plunger stroke 285 mm - Lifting speeds - Downward speed rapid path 200 mm/sec - Upward speed 135 mm/sec - Downward press speed 1 - 11 mm/sec - Total drive power 13 kVA - Space requirement approx.B 3700 x H 2700 x D 2100 mm - Weight approx. 8000 kg

3 Chamber Press – Waste Press Strautmann MK 1100 used Features • Manufacturer: Strautmann • Type: MK 1100/3 • Condition: Used goods, see photos • Colour: Green • Dimensions: 3600 x 1000 x 2700 mm • Net weight: 2000 kg • Connection: 4 kW, 400 V, 50 Hz • Press force: 200 kN • Year of manufacture: 2000 Price € 4.900,- net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment Over 5000 linear metres of pallet racks from numerous manufacturers in stock at all times (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Good day We hereby offer you a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Presona AB, Sweden Type LP 85 VH1 Year of construction 2014 Total operating hours, 37,565 hours, as of March 2025 Press force main press 85 t Specific pressing force 100 N/cm² Press force pre-press flap 28 t Dimensions of the insertion tray 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW 5-fold vertical bonding Hydraulic oil tank volume 1,000 L Press dimensions built up with hopper 10,350 x 2400 x 3,150 mm (L x W x H) Machine weight press approx. 25 t Hint: The machine was  ...

pressure: 160 t chamfer lenght: 4000 mm distance between columns: 3060 mm control: FORTRON CNC 10 H 4 throat: 280 mm stroke: 250 mm dayligth: 500 mm table length: 4050 mm table width: 280 mm feed down: 70 mm/sec feed up: 68,4 mm/sec working feed: 9 / 3,5 mm/sec operating pressure: max. 205 bar oil volume: 400 l total power requirement: 19,5 kW weight of the machine ca.: 20,8 t Total weight including accessories: 22 t dimensions of machine L x W x H: 4,8 x 1,88 x 2,93 m dimensions of switch cabinet: 1,6 x 0,5 x 2,25 m Acc.: programmable back gauge, upper and lower dies, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1000,400 mm pneumatic clamping: 2 St. moveable: Option For quick pressing of Minizinken- or Soflineverbindungen - Independent of the angle - Particularly suitable for arched manufacturing in window - Table size 1000 x 400 mm - Pneumatic connector 10 bar - Air consumption: 0.5 cdm / stroke - Two clamping cylinders for workpiece clamping - Right half of the table stored on hardened shafts via linear ball bearings - 1 pressure cylinders for linear displacement table - CE - execution (technical data according to manufacturer - without guarantee.!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t chamfer lenght: 3050 mm distance between columns: . mm Control: Cybeleg type: DNC880S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Output (caps/min): 1500

In the inlet: Presto CC 40 M baler with lift-tilt device Specifications: Manufacturer: Presto Type: CC 40 M Year of Make: 2017 Press force: 40 t Cycle time: 34 s Drive power: 15 kW Filling opening: 1080 x 1100 mm Filling volume: 0.85 m³ Binding: 4-ply, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t(h 100 kg/m³ - 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: paper, cardboard, foil Remark: Fully automatic regulating channel outlet, lift-tilt device for MGB 660, 770 and 1100 L empty containers. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any tim ...

press capacity: 250 t spindle diameter: 160 mm ram stroke range: 180 mm stroke speed: 71 Hub/min column daylight: 450 mm table surface area: 560x450 mm ram surface: 450x400 mm total power requirement: 12 kW weight of the machine ca.: 9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic wit ...

1015 KW Dresser counterpressure steam turbine for sale. 35.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. TUBRINE Brand: DRESSER-RAND (Nadrowski) Type: AVT 72 TW 17 Number: 16225-1 Electr. Power: 1015 KW Rated power: 1375 kVA Year of construction: 1995 (control units upgraded in 2008) Voltage: 400 V RPM: 1500 rpm Steam flow rate: 25 tons /h Dimensions (l x w x h): 4.50 x 2.40 x 2.30 m Inlet temperature: 253°C Inlet pressure : 18 bar Exhaust temperature : 152°C Outlet pressure : 5.0 bar Steam flow rate at the entrance: 25 tons/h Turbine weight: 11,000 kg Generator Brand: Leroy Somer Type: NWR 50 BL10-4P Electrical power : 1015 KW SWITCHBOARD Manufactured by TIL SA and updated in 2008 Schneider control

: 3400,4550 mm Working height: 2500 mm : 300 - 800 mm Glazing and control press RU-VGP3 Glazing and sealing press, clamping width max. 3150 mm, Length 3400 mm, width 900 mm, height 2500 mm, contact height 1900 mm, Pressing beam height 2400 mm, plant part covered with felt, installation surface as roller conveyor, lifting device from 300 - 800 mm. Left and right each a role as edge protection for elements up to 2500 mm height. (When ordering specify whether RIGHT or LINKER Pressbar mobile!) alternatively: ------------- RU-VGP4 Glazing and control press, version like RU-VGP3 however span max. 4000 mm, length 4550 mm (When ordering specify whether RIGHT or LINKER Pressbar mobile! (technical data according to manufacturer - without guarantee!) Price on request ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 1.000 kN heating plates:: 500 x 500 mm electrically heated:: °C heating power:: kW piston stroke:: ca. 500 mm no. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

In the pipeline: Baler Dixi 60 SLS, year of manufacture 2013 Specifications: Manufacturer: Maschinenfabrik Bermatingen Year of Make: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Filling opening: 990 x 1110 mm (WxL) Bale dimension: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Binding: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (LxWxH) Weight: approx. 5220 kg Materials: PET, paper, cardboard, foil The operating instructions and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

pressure: 1500 kN chamfer lenght: 3550 mm distance between columns: 3044 mm Control: Cybelec 34 PS-CN column arm: 350 mm max. ram stroke: 220 mm dimensions of the machine ca.: 3200 x 4200 x 2100 m sheet support: hinten / back number of support arms: 2, verschiebbar / adjust. die shift: hydraulical tool clamping: upper tool quick change system: crown: 3 sets of tools included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bread Press Fortuna Automatic A 3 H + Dough dividing and rounding machine Bread Press TOP Model Fortuna Automat Gr. 3+ with active shutdown Intervention protection with protective corners Head cleaning to the rear electrically Part head with stainless steel knife Dough insert up to 2400g depending on TA Dough divider with 3 knitting plates Connection 400V,16A-CEE plug Dimensions: 720 x 800 x 1510 mm WxDxH Used machine + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Cast Plate Service Package Maintenance contract E-Box for more safety Delivery Instruction & Commissioning

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

Exhibition machine MOVE - the high-precision vacuum press with a gigantic usable surface for vacuum form gluing and vacuum veneering of bent workpieces. With total flexibility, due to total mobility and revolutionary folding mechanism, to reduce the footprint to 45% when folded. High-precision vacuum press with flap opening incl. ⦁ Revolutionary folding mechanism (reduction of the footprint to 45%) ⦁ 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) optional, automatic shutdown when pressure is reached (with large vacuum volume) ⦁ Pressure regulation 400 to 900 mbar, analog vacuum pressure display ⦁ Highly elastic natural rubber membrane (up to +130 °C) ⦁ Diaphragm quick-change system ⦁ Stable phenolic resin worktop (up to +160 °C) ⦁ Gas pressure damper for flap opening ⦁ Vacuum pressure display ⦁ Connection for external vacuum bag ⦁ Smo ...

Buhler DMWP flake mill, 1000x600, complete with electric motor

- Pressing force: 1000 kN pressure: 289 bar - Piston stroke: 300 mm - Downward speed: 10.5 mm/s - Working speed: 2.7 mm/s - Return speed: 15 mm/s - Passage: 1050 mm - Table dimensions: 1030 x 460 mm - Table height adjustment: 600 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 110 mm - Guide piston Ø: 60 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2000 x 2150 x 900 mm - Weight: 1250 kg

ManuMatik / KraussMaffei High Pressure Cylinders The high-pressure cylinders come from a commutator press and were used there until the end. Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are also installed Check Valves z2S16-1-51 Pressure Reducing Valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x pressing unit Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

- Pressing force: 1500 kN - Pressure: 300 Mpa - Piston stroke: 300 mm - Downward speed: 9.8 mm/s - Working speed: 2.6 mm/s - Return speed: 13 mm/s - Passage: 1550 mm - Table dimensions: 1530 x 500 mm - Table height adjustment: 750 mm / 5 steps - Stop adjustment: 400 mm - Pressure stamp Ø: 2x 150 mm - Guide piston Ø: 70 mm - Motor power: 7.5 kW - Connection voltage: 400 V - Dimensions WxHxD: 2150 x 2050 x 1000 mm + 750 x 1100 x 750 mm - Weight: 1800 kg