View details
Presona LP40 EH1
Channel baling presses
UnoTech UPAMAT 120 V5 H3 So Baling presses
usedVerified seller
Request price
Directly to the seller
1 / 7
Technical data
· ID 167867715Baling presses
- Condition
- used
- Year of manufacture
- 2022
- Operating hours
- 85 h
- Location
- 49324 Melle
Identifikation
ManufacturerUnoTech
ModelUPAMAT 120 V5 H3 So
Technik
Quantity1
Description
automatic baler
Manufacturer: UNOTECH
Type: UPAMAT 120 V5/H3/So
Hours: 85 hours
Year of Make: 2022
specifications:
Length of the channel baler: approx. 13,500 mm
Width of the channel baler: approx. 2,400 mm
Height of the channel baler: approx. 3,400 mm
Weight of the channel baler: approx. 47,400 kg
Filling opening: 1,020 x 1,600 mm
Channel cross-section height x width: 750 x 1,100 mm
Bale weight depending on length and material 600 - 900 kg
Press force plunger: 1,000 kN at 260 bar
Cutting force: 1,200 kN at 315 bar
Electrical data:
Operating voltage: 400 V/3 PE
Frequency: 50 Hz
Voltage tolerance: +/- max. 5%
Degree of protection: IP 55
Control: Siemens S7 1.500
with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h.
Pumps on pump plate completely piped and installed in the oil tank.
Oil tank capacity 3,000 Ltr
Volume output
idle max. 850 m³/h
under operating conditions max. 410 m³/h
Weight performance depending on the bulk density
for 20 to 30 kg/m³ approx. 12.0 t/h
for 30 to 50 kg/m³ approx. 17.0 t/h
up to 60 kg/m³ approx. 21.0 t/h
up to 100 kg/m³ approx. 31.0 t/h
Bale weights 600 to 900 kg
including:
- Oil drip pan + leak oil warning device
- Vertical twist - V5
- Wire Unwinders - Subwire - (5)
- Wire Unwinders - Top Wire - (5)
- Horizontal twisting - H3 - Cross bonding
- Wire unwinders - horizontal - (6)
- LED lighting inside the binding
- Press box side walls of the channel baler planked and screwed with 10 mm wear plates made of special steel (HARDOX)
- Free kick 250 kN - narrow
- Press filling hopper (EÖ. 1,600 mm)
- Large bale chute (1,100 mm)
- Walking area with ascent stairs to the tying unit
- Remote diagnostics system
- Large digit display
- 3. Light barrier as overcrowded light barrier
- Multi-channel adjustment "ACC"
- Key transfer system (multi-key system)
- Central lubrication point for pressure plate rollers with maintenance position
- Steel sheathing for e-cables
- Hydraulic Needle Plane Gate TSC
- Planking adjustment channel with stainless steel (VA) sheets
- Manhole cover with angled inlet corners
- Belt control for a drive power of up to a maximum of 7.5 kW with soft start
- Belt filling hopper (EÖ. 1,600)
Optional:
Press feed conveyor with older year of construction
Feed length approx. 4 m according to pictures
Bale take-off belts according to photos from 2022
Manufacturer: UNOTECH
Type: UPAMAT 120 V5/H3/So
Hours: 85 hours
Year of Make: 2022
specifications:
Length of the channel baler: approx. 13,500 mm
Width of the channel baler: approx. 2,400 mm
Height of the channel baler: approx. 3,400 mm
Weight of the channel baler: approx. 47,400 kg
Filling opening: 1,020 x 1,600 mm
Channel cross-section height x width: 750 x 1,100 mm
Bale weight depending on length and material 600 - 900 kg
Press force plunger: 1,000 kN at 260 bar
Cutting force: 1,200 kN at 315 bar
Electrical data:
Operating voltage: 400 V/3 PE
Frequency: 50 Hz
Voltage tolerance: +/- max. 5%
Degree of protection: IP 55
Control: Siemens S7 1.500
with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h.
Pumps on pump plate completely piped and installed in the oil tank.
Oil tank capacity 3,000 Ltr
Volume output
idle max. 850 m³/h
under operating conditions max. 410 m³/h
Weight performance depending on the bulk density
for 20 to 30 kg/m³ approx. 12.0 t/h
for 30 to 50 kg/m³ approx. 17.0 t/h
up to 60 kg/m³ approx. 21.0 t/h
up to 100 kg/m³ approx. 31.0 t/h
Bale weights 600 to 900 kg
including:
- Oil drip pan + leak oil warning device
- Vertical twist - V5
- Wire Unwinders - Subwire - (5)
- Wire Unwinders - Top Wire - (5)
- Horizontal twisting - H3 - Cross bonding
- Wire unwinders - horizontal - (6)
- LED lighting inside the binding
- Press box side walls of the channel baler planked and screwed with 10 mm wear plates made of special steel (HARDOX)
- Free kick 250 kN - narrow
- Press filling hopper (EÖ. 1,600 mm)
- Large bale chute (1,100 mm)
- Walking area with ascent stairs to the tying unit
- Remote diagnostics system
- Large digit display
- 3. Light barrier as overcrowded light barrier
- Multi-channel adjustment "ACC"
- Key transfer system (multi-key system)
- Central lubrication point for pressure plate rollers with maintenance position
- Steel sheathing for e-cables
- Hydraulic Needle Plane Gate TSC
- Planking adjustment channel with stainless steel (VA) sheets
- Manhole cover with angled inlet corners
- Belt control for a drive power of up to a maximum of 7.5 kW with soft start
- Belt filling hopper (EÖ. 1,600)
Optional:
Press feed conveyor with older year of construction
Feed length approx. 4 m according to pictures
Bale take-off belts according to photos from 2022
Inquire about this machine
Your inquiry goes directly to the seller of this machine.
