press brake machine used for sale

Used Flottweg B-800 double-belt press. Technical data: Type: B-800 Hourly throughput [t/h]: 2-6 Belt width [mm]: 800 Drive power [kW]: 1.5 Electrical connection [V/A]: depending on the country of installation Pneumatic connection [bar]: 6 Design and operating principle: 1. The product is continuously fed into the feed box and evenly distributed on the lower belt. The height and width of the cakes can be adjusted to the specific product. 2. In the wedge zone, the upper belt is pressed against the product. A slow increase in pressure creates a stable product cake. 3. In the extrusion area, the cake is dewatered, first using a special profile roller, which ensures rapid liquid drainage to both sides of the cake. 4. The product is then effectively dewatered by pressure rollers with gradually decreasing diameters and increasing pressure. 5. Optional linear pressure rollers  ...

Completely overhauled HSB 15 incl. certified oil pan and protective fence for a quick and Trouble-free commissioning. Overhauled in 2021 Optional new 8m3 bunker and conveyor screw available. Including. Used machine warranty

Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

Channel baler Presto HPK 50 HS, built in 2014 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2014 Drive: 30 KW Press force: 50 t Hours: 7145 Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Materials: paper, cardboard, foil, PET bottles Note: Knives and counter-blades as well as all sliding plastics have been replaced. The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The user manual and CE declaration are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability f ...

250 ton x 3000mm 3100mm ben length 3200mm between frames MASSIVE tooling package Bend aid and voice control!

Key data: 56 kN

Machine Type: Toggle Press Manufacturer: Gechter Type: HKPL 56 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 2.450 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference number M-GEC-0126 DESCRIPTION We offer you a used toggle press from the manufacturer Gechter. With fine adjuster Weight approx. 205kg Max. power 56KN at 6.5 bar Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

automatic baler Manufacturer: PAAL Type: KONTI 700 G/S Year of construction 2010 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 75 kW Throughput capacity (according to manufacturer's specifications): approx. 650 m³/h Capacity at 35 kg/m³: 22.5 t/h Capacity at 60 kg/m³: 36.5 t/h Capacity at 100 kg/m³: 55.5 t/h Binding: 5-fold vertical Bale weight: approx. 800 - 1,450 kg depending on baled material and bale length Machine weight: up to approx. 47 t Optional: with Bollegraaf steel plate strip according to picture

Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar/no Uraca, Woma, Kamat Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min. Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3 motor AH 250 M-4; 400V; 50 Hz Dimensions LxWxH: approx. 1665x1212x1641 mm Weight: approx. 1050 kg Built: 2008 Condition: in very good used condition. Includes complete documentation.

STATIONary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 400 bar Flow rate: 56 l/min. Drive speed: 1,475 RPM Drive power: 44 kW with SIEMENS 45 kW 3 motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions LxWxH: approx. 1300x1100x1400 mm Weight: approx. 1.115kg Built: 1995 Condition: in good used condition.

IMAL GLADIATOR 255 CNC hydraulic press brake was built in 2003 in Italy by I.MA.L. GROUP. The machine is designed for precision machining of sheet metal with a maximum length of 4100 mm. The high press force of 255 tonnes, combined with an extremely stable design, guarantees the best bending results, even during the most intensive challenges. All this is complemented by an advanced DELEM numerical control with all the necessary functions. The IMAL GLADIATOR 255/41 CNC press brake weighs 20800 kg. Technical specifications of the IMAL GLADIATOR 255 press brake - CNC controller: DELEM DA 65 - maximum press force: 255 t (2550 kN) - maximum sheet metal length: 4100 mm - approach speed: 140 mm/s - bending speed: 10 mm/s - return speed: 140 mm/s - reach: 510 mm - slider stroke: 320 mm - maximum distance between work table and slider: 535 mm - work table width: 90 mm - distance bet ...

- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°

ROMACO KILIAN TABLET PRESS, MODEL S370 PRIME Medium-sized single-layer rotary tablet press. Modular and compact, for flexible tablet production. Made in Germany. Built in 2022. CHARACTERISTICS - Interchangeable die table - Tablet chute on one side - Simple and intuitive HMI control system - Connectable tablet control unit for automatic in-process control - Weight: 1.925 kg PRODUCTION - Output: 156,000 to 330,000 (depending on tablet size and pressing material) - Printing stations: 26 to 44 - Number of dies: 44; 40; 32; 26 - Tool type (EU and TSM): B; D - Die type: BBS; BB; B; D - Max. pre-compression force: 40 kN - Max. main compression force: 80; 100 kN - Max. tablet diameter: 11; 13; 16; 25 mm - Max. die fill: 16; 20 mm ENERGY CONSUMPTION - Drive power: 5.5 kW - Standard voltage, frequency: 400 V, 50/60 Hz - Compressed air: 6 bar

DARLEY EHP-L 110 31/25 CNC hydraulic press brake was built in 2000 in the Netherlands by DARLEY B.V. The machine is in very good technical condition and has been regularly maintained throughout its service life. In December 2023, all cylinder seals and oil with filters were replaced by an authorised service. In February 2024, on the other hand a full service of the WILA top tool clamping system was performed. The DARLEY EHP-L 110 31/25 is used for precision machining of workpieces with a maximum length of 3100 mm. The high press force of 110 tonnes, combined with an extremely stable design, guarantees the best bending results during even the most intensive challenges. The deflection arrow compensation function additionally ensures the desired angle along the entire length of the bent workpiece. The offer also includes an extensive equipment, consisting of, among others, DELEM’s adva ...

ZTS KOSICE LE 160 C eccentric press was built in 1988 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is in very good technical condition and has been regularly maintained throughout its service life. All control solenoid valves were replaced in February 2023. ZTS KOSICE LE 160C is an excellent choice for a wide range of workpiece machining, i.e. punching, cutting and stamping. All of these machining processes are performed with a high press force of 160 tonnes, which, combined with a rigid design, enables the production of parts with high repeatability and excellent precision. The ZTS LE 160 C eccentric press weighs 10150 kg. Technical specifications of the ZTS KOSICE LE 160 C press - maximum press force: 160 t (1600 kN) - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 30/min - maximum slider stroke: 120 mm -  ...

Frame press Hess hydraulic Type: HYDRO-LUX Crimping dimension approx. L 3550 m x W 2250 mm Connected load 380 V / 50 Hz 2.6kw Hydraulic Pump Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm 0 - 8 bar pneumatic Optoelectronic measurement query. The window scantlings are placed in the feed channel so that the photoelectric sensor can measure whether the pressure beams and press corners need to be opened or closed. If the light beam of the probe hits the window scantlings, the machine receives the command to drive up in width and height until the working dimension is reached. Workflow: Automatic dimensional adjustment loose insertion Automatic pressing process loose presentation remove Automatic dimensional adjustment Program selection options in the control system: 1. Automatic measurement adjustment via optoelectronic measurement query with a ...

Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of continuous strokes per min: 10 The highest frequency of single strokes per min: 7 Closed height: 1180 mm Adjustment of closed height: 200 mm Slider's dimensions: -From left to right: 5000 mm -From front to back: 2000 mm Dimensions of the plate of the die: -From left to right: 5000 mm -From front to back: 2000 mm Capacity of the main drive: 250 kW Overall dimensions: -From left to right: 7640 mm -From front to back: 5980 mm -Height above floor level: 10490 mm

Key data: 200 t, 500 mm, 200 mm

(1982) 200t Lauffer Hydraulic Press High-Speed Hydraulic Press with Advanced Shock Absorption This Lauffer hydraulic press is a high-performance machine designed for speed and precision, capable of 2,000 kN of pressing force. Its high-speed designation is backed by a rapid descent speed of 330 mm/sec and a sophisticated 8-fold flat guidance system to maintain ram alignment even under heavy or off-center loads. Technical Details Machine Type: Hydraulic Press Manufacturer: Lauffer Model: RPS 200 Year of Manufacture: 1982 Nominal Force: 200t Max. Return Force: 225 kN Max. Ram Stroke: 200 mm Shut Height: 500 mm Ram Guidance: 8-fold flat guidance Table & Ram Surface Area (W x D): 800 mm x 630 mm Table Hole Diameter: 204 mm Clearance Between Uprights (Front / Side): 840 mm / 320 mm Operating Speeds: Rapid Descent: 0 – 330 mm/sec (steplessly adjustable) Pre ...

Key data: 250 t, 500 mm

(2018) 250t Hidroliksan Hydraulic Press Hydraulic Press with Integrated Die Cushion for Deep Drawing This 2018 hydraulic double-column press is a heavy-duty production unit designed for versatility, featuring a robust 250-ton capacity and high-quality Rexroth and SICK components. With its 100-ton integrated die cushion and generous 500 mm stroke, it is exceptionally well-suited for complex deep drawing and forming operations that require precise pressure control. Technical Details ‍ Machine Type: Hydraulic Double-Column Press Manufacturer: Hidroliksan Model: H-TYPE Nominal Force: 250t Return Force: 50t Stroke Length: 500 mm Speeds: Approach: 160 mm/sec Pressing: 5 – 15 mm/sec Return: 190 mm/sec Working Surfaces: Ram Plate: 1,000 x 800 mm Table Plate: 1,000 x 800 x 100 mm Components: Pump: REXROTH (71cc – 103 L/min) Motor: 22 kW (30 hp), 1,500 rpm ...

Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Machine name: Chamber filter press used Manufacturer: Netzsch Type: 1000 /110 Year of Make: 1996 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 2509 liters Procedure: Closed Filter area: Approx. 163 m2 Plate format: 1000 x 1000 mm Number of plates: 100 Panel Material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: Yes Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 9,347 x W 2,245 x H 2,435 mm Curb weight: 11,800 kg Tech. Documentation: Yes Note: It will be available from January 2025 Accessories: A control cabinet, a control cabinet, a hydraulic system, a light barrier, a filter cloth washer and drip plates Condition: Used Price: On request

Furnace 1200 temperature 10 - 1200 Celsius 2 heating zones 100kW auto door PLC Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemeister Doosan Daewoo traub hwacheon index Wema zeulenroda mueller Erfurt tox presso technik dunkes galdabini hare ponar zeulenrdoda eitel Ziel des Spannungsarmglühens ist die Reduzierung von Eigenspannungen im Material. Solche Spannungen entstehen zum Beispiel durch Gefügeum ...

Pressure plate intermediate table Grafoteam MDT 260 C; condition overhauled; 2 pieces available; Arm length 780mm; Max. Plate size 780x820mm. Plate conveyor Grafoteam MDT 260 C; condition rebuilt; 2 pic. on stock; arm lenght 780mm; max.plate size 780x820mm.

250 ton x 3000mm MASSIVE SPECIFICATION €100,000 EUR Tooling package!

WEIBERT WJ-LB2 Long-hole drilling machine WEIBERT WJ-LB2 400V 2.2 KW ( 3 hp) n=2840 min. Drilling table size 600x320mm Drilling table height 870mm Drilling depth 245mm Drilling width 205mm Height adjustment 165mm Swivel ling unit swivel -45°/90°/+45° Machine table made of GREY ING! Manual adjustment with handwheel! AGGREGAT AND TABLE FROM MACHINE GREY! G&WJ-LB2 option: Dowel drilling device available with pitch 16-22-25 and 32mm G&WJ-LB-DÜBEL

Manufacturer Erfurt Pressen Machine type Leinhaas Technology Country of origin Germany (BRD) Machine data Parameter Value Unit / Notes Max. press force 4500 kN Stroke rate (continuous) min. 15 strokes/min Max. stroke rate (tool designed for) 75 strokes/min Ram stroke 3 – 200 mm Ram adjustment 120 mm Installation height (min.) 600 mm Max. installation height 670 mm Dimensions of press table Press table length 2000 mm Press table width 1250 mm T-slots (press table) DIN 650 – 28 H12 Number of T-slots (table) 11 pcs Distance between T-slots 150 mm Dimensions of press ram Slide length 2000 mm Slide width 1200 mm T-slots (slide) DIN 650 – 22 H12 Number of T-slots (slide) 13 pcs Distance between T-slots 150 mm Press frame opening Side opening 900 mm Front opening 2200 mm Tool clamping Tool clamping height (upper tool) 80 mm Tool clamping h ...

DIEFFENBACHER PO-F 1250 A hydraulic press was built in Germany in 1981 by J. Dieffenbacher GmbH & Co. The machine was regularly maintained and upgraded throughout its service life. In 2016, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The piston seals were also replaced and measuring scales were added for precise position measurement of the slider, top ejector and lower die cushion. The DIEFFENBACHER PO-F 1250 A is an extremely versatile hydraulic press for demanding metal forming applications. Its main purpose is die stamping of steel components, calibration of forgings, dogging, hot and cold forging, cold forming and other operations that require very high press forces. All these machining processes are performed with a high press force of up to 1250 tonn ...

ARISA S-2-400-260-FD mechanical press was built in 2000 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables precise punching and stamping of metal parts. All these machining processes are performed with a high press force of up to 400 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The ARISA S-2-400-260-FD features a robust, stress-relieved gantry design with an open side wall. This design maintains high rigidity, stable parameters and repeatability during even the most intensive operations with high press force. It is distinguished by the use of two connecting rods, a flywheel drive and an eccentric pinion gear. This solution ensures even torque transmission and smooth and pr ...

TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...

DIEFFENBACHER PO 500A hydraulic press was built in 1978 in Germany by J. Dieffenbacher GmbH & Co. The machine has been regularly maintained and upgraded throughout its service life. In 2017, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The seals and electrical system were also replaced. The DIEFFENBACHER PO 500A is the perfect choice for even the most demanding metal forming operations. It enables the execution of such operations as die stamping, punching, calibration of forgings and hot and cold bending. All these machining processes are performed with a high press force of up to 500 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The machine is also characterised by a rigid body made of thick steel plates and a ...

SMG DS 40 hydraulic press was built in 2000 in Germany by SMG Süddeutsche Maschinenbau GmbH. The machine, which is characterised by high reliability, is used in metal stamping and punching. The machining process is performed with a high press force of 40 tonnes, which, combined with a rigid body, ensures the manufacture of highly repeatable and perfectly precise parts. The parameters, i.e. the ram speed, the position of the work tables and the press force, are adjusted by means of a simple control based on limit switches. The SMG press weighs 4 tonnes. Technical specifications of the SMG DS 40 press - maximum press force (adjustable): 40 t - work table dimensions (L x W): 600 x 400 mm - stroke of upper working table: 150 mm - distance between work tables: 400 mm - dimensions (L x W x H): 1230 x 570 x 2500 mm - weight of the SMG DS40 machine: 4 t

BECKER & VAN HÜLLEN deep drawing press was built in Germany by Becker & van Hüllen Niederrheinische Maschinenfabrik GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. In 2022, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The BECKER & VAN HUELLEN 650T is used in industries specialising in stamping, production of automotive parts, tanks and other parts that require high press force and multi-stage forming. Its main purpose is deep drawing. The machining process is performed with a high press force of up to 650 tonnes. The two-stage design allows successive forming stages to be carried out in a single work cycle, thus enabling the manufacture of parts with even the most complex shapes. The m ...

280T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 280 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guided tour: 4 column guides Clear width between the uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 900 mm Total height approx.: 3, ...

1100T Servo Double Column Heating Press with Heating Plates We can offer you this press at a particularly low price, as the machine is already under construction and the original customer has withdrawn from the order for two identical machines. This makes it possible to purchase a high-quality servo-hydraulic double-column press with heating plates at attractive conditions and at comparatively short notice. The photos shown show similar, already built machines from the factory and serve as example pictures. Technical data + information: General information Press force: 1,100 t Type: Servo Double Column Heating Press Cylinder: 1 cylinder Guide: 4 column guides (Ø 150 mm) Clear width between the uprights: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from the floor incl. damper plates and heating plate: 1,000 mm Total height  ...

mobile compressed air with stainless steel sheets metrics: Length: 1.44 m Width: 0.36 m Height: 0.16 m

For sale is a tested pressure vessel with a capacity of 900 liters. The container from the well-known manufacturer OKS is built in 2023 and has not yet been used. Due to the existing TÜV test, the container complies with the applicable regulations and is ideal for use in industry, trade or even in the hobby sector. Technical data: - Manufacturer: OKS Otto Klein GmbH - Year of construction: 2023 - Volume: 900 liters - Max. operating pressure: 11 bar - Test pressure: 16.5 bar - Temperature range: -10 °C to +80 °C - Medium: Air / Nitrogen - Corrosion surcharge: 0.5 mm - TÜV test available (04/2023) - Complies with Directive 2014/29/EU If you have any questions, please feel free to contact us at any time

Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch -Manufacturer: Dürr -Part No.: 4Q 01 21 300 -Article No.: DE45E50040PKD232 -Basic measuring range: 0...10 kPa -Dimensions: 105/90/H70 mm -Weight: 0.3 kg

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve -Manufacturer: Superior, pressure relief valve, unused original packaging -Type: 3220-360/360 PSI -Dimension box: 105/50/H50 mm -Weight: 0.3 kg

Print roller, printer roller, spindle, anvil roller, pressure roller -Print roller: unfortunately no type designation -Technical dimensions: see photos -Dimensions: 295/100/H100 mm -Weight: 5.7 kg

Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg

Pressure reducers, pressure regulators, bladder accumulators, high pressure bladder accumulators -Pressure accumulator: without type designation -Container: Ø 122 mm -Dimensions: Ø 122 x 200 mm -Weight: 2.7 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG6UG-3 -Control range: 0.4-6 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG50UG-6Z MIN -Control range: 2.5-50 mbar -Pmax.: 600 mbar -Dimensions: 115/75/70 mm -Weight: 0.3 kg

Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch unused OVP -Type: DG10U-6T -Control range: 1-10 mbar -Pmax.: 600 mbar -Dimensions box: 75/75/70 mm -Weight: 0.4 kg