pre press used for sale

This press from Collin at Plastima Used Machinery in machine storage. The machine is from 2001 and is in good condition. – Brand: Collin Pilot & Lab Solutions – Model: P200P – Construction year: 2001 – Plate Size: 200 x 200 Mm – Max. pressing force: 196 kN

Ex pressure vessel with agitator, MDG 45, 100 hours, V4424140313 Walther, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 5.020 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. Top Condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Top cleaned and ready for immediate use. Technical data: - Ex Stainless steel pressure vessel MDG45, 42.8 liters, 4 bar, Walther-Pilot. - Ex electric agitator with gear motor, SK0Z/2G-63S/4 2G TF RD, Nord - Ex pressure regulator, V3540000000, Walther-Pilot - Pneumatic controller, ITV2030 34F2N3, SMC - Incl. industrial plug and cable - optional with Defende ...

Piferoen type 5H baler complete with conveyor. Baling press 6.30m x 2m x 1.6m approx. Conveyor 7.5m x 1.2m x 0.80m approx.. Chamber size (WxDxH) 108 x 59 x 105 cm approx. Suitable for baling textiles and other products. Bales can be completely covered for protection of material.

SPECIFICATIONS: Cold press Working table mm: 2500 x 1300 No. 4 pistons Vertical stroke: 450 mm

for sale is a very well-maintained Hammelmann high-pressure system, built in 2019, with ES 3 control. The system can be used immediately and is in very good used condition. Technical data: Manufacturer: Hammelmann GmbH Machine No.: B9.02302.xxxx Ref: 09.63302.xxxx Year of Make: 2019 Pump capacity: 261 kW Speed: 1,800 rpm Max. pressure: 940 bar Flow rate: 152 l/min Piston diameter: 33 mm Pressure Control Valve: 0046 Oil: PAO VG 320 Oil volume: 28.5 l Control: Hammelmann ES 3 Operating hours according to the display: Operating hours system: 3.048,43 h Pump operating hours: 1,624.17 h Drive Diesel Volvo TAD 1351 VE step IIIA/TIER 3 Power 285 kW The facility is well maintained, technically ready for use and can be used immediately. Further information, photos and price on request.

Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T

2000 Ton Sumitomo Hot Forging Press line Year 2006 Stroke 350 mm (13.78") Strokes per min 75 Shut height 850 mm (33.47") SlideAdj. 7 mm (.27") Ram size 1200 mm LR X 1300 mm FB Bed size 1320 mm LR X 1300 mm FB 4 stage transfer system Slide knockout Bottom knockout Scrap System Dual Die Changer Extra Die Shoes Billet Heater and Billet Saw Also Available This line was used by HONDA to make transmission gears, It takes a billet, cuts it to size, heats it to 1300 C then the press hits it 4 times. It can determine good from bad parts, the bad parts get sent to a quench tank, the good parts get sent into a cool down conveyor that you can pick the parts up by hand at the end. The entire system was ran by one operator.

used canning press / packaging press Manufacturer: WAGNER Type: WDSP 7000 Year of construction: 1993 specifications: Pressing force: 70 t Specific pressing pressure: 318 kg/cm² Drive power: 15 kW / 400 V Duct format: 550 x 400 mm Filling opening L x W: 1,150 x 550 mm Compaction chamber: 700 x 550 x 400 mm Total stroke: 2,100 mm Machine length: approx. 5,500 mm Machine width: approx. 1,920 mm Capacity: approx. 1.5 t/h (depending on material) Package size, WxHxL: 550 x 400 x 280 - 550 mm Package weight: approx. 20 - 40 kg (depending on the setting of the package length) Machine weight: approx. 3,500 kg

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Nominal pressing force 4,000 kN Plunger stroke, adjustable in steps 30160 mm Plunger adjustment 180 mm Projection 515 mm Idle stroke rate 45 / min Option: infinitely variable 10 ... 60 / min Tool installation height at maximum stroke bottom and top adjustment 660 mm Table clamping area (WxD) 1,700 x 1,000 mm Table height above floor 1,005 mm Plunger clamping surface (WxD) 1,100 x 800 mm Pin hole in plunger 65 mm Main motor power 45 kW Height of the machine approx. 4,325 mm Weight of the machine 33,000 kg Control system - press safety control with redundant design and self-diagnosis as well as a status and error display in plain text Stepless stroke rate control in the range of 1060 strokes/min via ABB frequency converter Control variant -touchscreen TFT color incl. electronic cam switchgear with tool control and tool safety,  ...

Oil Press KK100 F Universal Features: Length 1710 mm Width 550 mm Total height 1230 mm Weight 390 kg Description: Sowing capacity: up to 100 kg/h Motor power: 7.5 kW Speed: 15–70 1/min. Voltage – Standard Model: 400V 3-phase | 230V 3-phase Voltage – Special version: 230V | 1-phase Application: Mainly for seeds with an oil content of 6–50%: Amaranth, argan, apricot kernels, avocado seeds, baobab, cottonseed, blueberry, fenugreek, borage, nettle, beechnuts, cashew, copra/coconut, chia, strawberry seeds, peanut, safflower, pomegranate seeds, rosehip seeds, hemp, hazelnut, raspberry seeds, elderberry seeds, jatropha, jojoba, currant seeds, coffee beans, cocoa, camellia, cherry stones, coriander, cumin, pumpkin seeds (unpeeled), camelina, linseed, lupins, corn germ, marjoram, tangerine, almonds, Mango seeds, milk thistle, melon seeds, poppy seeds, m ...

Inv. Num. : 6992 Type: LKT 250 Producer: METALPRESS Created: 1963 Parameters: Ram stroke: 120 mm Plunger adjustment: 100 mm Machine weight: 2700 kg

Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Press force: 5.62 kg/cm² Year of construction: 2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical supervision. Price also includes paint renovation.

Horizontal baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2020 Drive power: 11 kW, 400 V / 21 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, foil Note: The press is in good condition. It has been checked and tested. You can find a video on our website or YouTube channel. The operating instructions are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subje ...

Specifications Maximum pressure: 12 tons Power supply: 380V/ 5.5 kW Press force: 2.5 kg/cm² Year of construction: 1985-1993 Bale size: 800x600x(600-1000)mm Productivity: approx. 3 bales/hr Bale weight: approx. 100 - 200 kg Price: on request Machine is fully functional, after technical supervision.

automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 V5/H3 Operating hours: approx. 5,400 hours Year of Make: 2021 Technical data: Length of the channel baler: approx. 13,500 mm Width of the channel baler: approx. 2,400 mm Height of the channel baler: approx. 3,400 mm Weight of the channel baler: approx. 45,000 kg Filling opening: 1,020 x 2,000 mm Channel cross-section height x width: 750 x 1,100 mm Bale weight depending on length and material 600 - 900 kg Press force: 1,200 kN at 315 bar Electrical data: Operating voltage: 400 V/3 PE Frequency: 50 Hz Voltage tolerance: +/- max. 5% Degree of protection: IP 55 Control: Siemens S7 1.500 with two 410 litre axial piston pumps, each with 45 kW drive power, for an increase in output to approx. 410 m³/h. Pumps on pump plate completely piped and installed in the oil tank. O ...

automatic baler Manufacturer: UNOTECH Type: UPAMAT 120 H5 / RB Operating hours: approx. 2,800 hours Year of Make: 2017 Machine No.: U24170 Technical data: Press force plunger: 1,000 kN at 260 bar Cutting force: 1,200 kN at 315 bar Specific pressing force: 124 N/cm² Main pump drive 1 x 55 kW Power Steering Pump: 1 x 11 kW Pump capacity: 410 Ltr./min. Oil tank capacity: 1,300 ltr Volume output under operating conditions: max. 280 m³/h Weight performance depending on the bulk density at 20 to 30 kg/m³ approx. 8.4 t/h for 30 to 50 kg/m³ approx. 13.0 t/h at 60 kg/m³ approx. 16.0 t/h at 100 kg/m³ approx. 23.0 t/h Binding: 5-fold horizontal for plastic cable Filling opening: 1,020 x 2,000 mm Channel cross-section height x width: 1,100 x 1,100 mm Bale weight depending on length and material 800 - 1,000 kg Press bottom planked wi ...

New, unused automatic baler Manufacturer: PAAL Type: KONTI X 700 J Including automatic 4-fold cross binding Hours: 0 Year of construction 2026 Technical data: Press force: 1940 kN/ 198 t at 300 bar Specific pressing force: 160 N/cm² Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW (axial piston pumps) Throughput capacity (according to manufacturer's specifications): approx. 675 m³/h Capacity at 35 kg/m³: 23.6 t/h Capacity at 60 kg/m³: 38.7 t/h Capacity at 100 kg/m³: 57.5 t/h Binding: 5-fold vertical + 4-fold horizontal Machine weight: up to approx. 59 t including new press feed belt Manufacturer: PAAL Year of construction 2026 Type KEF 1900 incl. gooseneck Conveyor width: 1,900 mm Feed length: approx. 6,250 mm Subject to errors in the technical data.

M. No.: 2067 Working width max. (mm): 800

automatic baler Manufacturer: PAAL Type: KONTI 125 D / SO Year of Make: 2002 Technical data: Press force: 60 t at 300 bar Specific pressing force: 7.79 kg/cm² Channel format: 700 x 1,100 mm Bale weight: 425 - 580 kg, depending on material and bale length Filling opening: 1,400 x 1,020 mm Machine weight: approx. 20 t Drive power: 30 kW Throughput: 150 m³/h Pressing capacity: approx. 5.00 t/h at department store (35 kg/m³ bulk density) approx. 8.75 t/h for mixed paper (60 kg/m³ bulk density) approx. 12.5 t/h for collected goods (100 kg/m³ bulk density) Wirbulator, which can be swivelled in by hand, has been retrofitted. Optionally with: Press feed belt Manufacturer: PAAL Type KEM 1400 Year of Make: 2002 Technical data: Conveyor width: approx. 1,400 mm Wheelbase: approx. 14,250 mm Feed length: approx.  ...

Fully automatic baler Manufacturer: BOLLEGRAAF Type: HBC 80 Year of Make: 2000 Operating hours at the end of Feb. 2026: approx. 41,500 hours Technical data: Press force: 78 t Specific pressing force: 4.58 kg/cm² Drive power: 1 x 45.0 kW Throughput under operating conditions: with a bulk density of 20 kg/m³ approx. 9.0 t/h with a bulk density of 50 kg/m³ approx. 18.5 t/h at 100 kg/m³ bulk density approx. 30 t/h Filling opening: 1,500 x 1,100 mm Bale size: 720 x 1,100 mm (H x W) Binding: 4-fold vertical Machine weight: approx. 24 t Bale weights: up to approx. 550 - 800 kg including: - Wire unwinding devices - Feed belt with approx. 6 m feed length - Conveyor belt hopper - Walking area with ladder on the funnel according to photos

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

automatic baler Manufacturer: HSM Type: VK 8818 R-FU Year of construction 2021 Operating hours: approx. 81 Technical data: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Practical throughput: approx. 50 % of the previously mentioned theoretical performance Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg Optionally with: Press feed belt Manufacturer: ? from ...

used baler Manufacturer: PAAL Type: DOKON 500 with twine tying Year of construction: May 2014 Technical data: Binding: 5-fold horizontal Press weight up to: approx. 30 t Press force: 122 t Specific pressing force: 9.90 kg/cm² Filling opening: approx. 2,000 x 1,020 mm Channel cross-section: 1,100 x 1,100 mm Drive power: 1 x 45 kW Throughput: 250 m³/h Pressing services: at 100 kg/m³ bulk density: approx. 25 t/h at 150 kg/m³ bulk density: approx. 30 t/h at 200 kg/m³ bulk density: approx. 35 t/h Binding: 5-fold horizontal Transport dimensions: Length: 13,300 mm Width: 2,600 mm Height: 3,300 mm without yarn unwinding devices, without control cabinet, without binding twine, without feed belt, without a personal protection system, without conveyor belt hopper and without walking surface with vertical la ...

Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Press-fit device for ceramic pins in rotor shafts Principle: The ceramic pins are fed to a test station via a pneumatic hose by means of a vibrating conveying bowl, where the position of any single-sided bore is checked. This is done with an optical sensor. Wrongly positioned parts are conveyed through a pneumatic slide into a collection container. Pins that are correctly positioned are fed through another pneumatic hose to the separator of the press-fit tool. The actual press-fit process is also carried out pneumatically with a roller bearing guided punch. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too easily into the shaft. With a pressure p2, which can also be adjusted manually, the pin is then pressed into the rotor shaft at full stop. A 5,000 N preloaded disc spring package prevents excessive force from being exerted on  ...

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

SPECIFICATIONS: Pneumatic Upholstered Furniture Press

Offer 20202 Specifications: - max. pressing force 35 t - Projection to the middle of the ram 240 mm - Working height adjustable with hand crank 540 to 940 mm - 2 Hand control - Protective shield enclosure with light barrier - Material - Slide-in device - Pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - Drive 400 V / 15.5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm - Weight approx. 2500 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³

Press brake manufactured in 2023. This GWEIKE GKS-BC0315 features a pressing force of 50 t and a maximum sheet length of 1,600 mm. It is capable of bending dimensions up to 1,500 x 1,500 x 170 mm, making it suitable for large-scale boxes and panels. If you are looking to get high-quality bending capabilities, consider the GWEIKE GKS-BC0315 machine we have for sale. Contact us for further details regarding this machine.

3 × Hughes HPS 2200 High Pressure Pumps 320 bar – 228 l/min, used For sale are three used Hughes HPS 2200 high-pressure pumps in 100% working condition. The pumps were only taken out of service because the associated diesel engines and controls were needed for another project. Technical data Manufacturer: Hughes Pumps Ltd. (England) Model: HPS 2200 Max. operating pressure: 320 bar Flow rate: 228 l/min Pump speed: 400 rpm Input speed: 1,800 rpm Gear ratio: 4.50 : 1 Transmission oil: EP90 Oil capacity: 18 litres Years of construction 2 × built in 2010 (yellow pumps) 1 × built in 2009 (blue pump) ✔ 100% functional condition The operating hours cannot be specified because the original diesel engines and controls were already dismantled before storage. The pumps are suitable for a wide range of industrial applications, including water pumping, mining, mari ...

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg

This 8-axis AMADA HFBO 100-30 press brake was manufactured in 1998. It features a maximum press force of 1000 kN and a bending length of 3100 mm, providing robust capabilities for various applications. The machine has undergone software upgrades and cylinder replacements in 2024. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 100-30 press brake we have for sale. Contact us for further details.

Keeldiepte: 405 mm slag: 21 mm 55 slagen per minuut Punching pressure: 45 ton Max punching dia: Ø 27 in 13 mm / Ø 39 in 9 mm Power needed: 2,2 kW Length: 1300 mm Depth: 800 mm Height: 2050 mm Weight: 1000 kg

pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 595 x 410 mm ram adjustment: 70 mm no. of strokes: 150 Hub/min table adjustable in height: 240 mm total power requirement: 1,1 kW weight of the machine ca.: 1,45 t dimensions of machine L x W x H: 1,30 x 0,80 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Briquetting press 1000 kg/h approx. 55 kW Diameter 75 mm

Laminating press manufactured in 2016. This MASTER PUR-1400 is a professional, high-performance laminating line designed for single-sided panel lamination using PUR Hot Melt adhesive. It features a working width of 1,400 mm and can handle maximum panel sizes of 2,800 × 1,300 mm. If you are looking to get high-quality laminating capabilities, consider the MASTER PUR-1400 laminating press we have for sale. Contact us for further details regarding this machine.

This 4-axis PLACKE QPB-4 150/3100 was manufactured in 2001. It features a press force of 1500 kN and a bending length of 3100 mm, making it suitable for various bending applications. The machine includes a mechanical crowning system and comes with a comprehensive set of tooling and accessories. If you are looking to get high-quality bending capabilities, consider the PLACKE QPB-4 150/3100 press brake we have for sale. Contact us for further details.

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

HEBÖ WZT24 24T horizontal bending machine was manufactured in 2014 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which single workpieces were produced. The HEBÖ WZT24 is a efficent horizontal bending machine designed for the precise bending, forming and straightening of workpieces made from materials suitable for cold forming. All these processes are performed by a horizontal working unit with a maximum press force of 24 tonnes. The machine is equipped with a 950 x 600 mm work table and a tool cabinet, which provides convenient storage for the necessary tools. The machine operator has at his disposal an intuitive PLC controller and an ergonomic foot control. All this is complemented by a rigid design that ensures proper stability during intensive machining operations. The HE ...

pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 730x600 mm ram surface: 540x360 mm table height: 850 mm tool hole in ram: Ø40 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 2000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: 195 mm stroke: 8-78 mm no. of strokes: 76-190 Hub/min ram - range of adjustment: 60 mm table surface area: 650x380 mm table height: 840 mm hole in the table: Ø 110 mm ram surface: 250x350 mm tool hole in ram: Ø 40 mm total power requirement: 3 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: BxTxH 1450x1220x2110 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake manufactured in 2003. This Durma HAP 40200 features a press force of 200 tons and a bending length of 4050 mm. It operates at a stroke rate of 6 strokes per minute, with a stroke length of 185 mm. If you are looking to get high-quality bending capabilities, consider the Durma HAP 40200 machine we have for sale. Contact us for further details.

Technical data Weingarten Mechanics Press 800 to Year of construction 1999 Nominal pressing force from 12.7 mm before UT 8000 kN Working stroke rate 10 - 40 strokes/min Setup stroke number 5 - 15 stroke/min Plunger stroke 200 mm Maximum tool installation height 1200 mm Stroke at the bottom, adjustment at the top Minimum tool installation height 900 mm Plunger adjustability 300 mm Standard tool installation height (closed tool if power setup springs are present) 980 mm Table top dimensions, length x width 3600 mm x 230 mm Plunger plates dimensions, length x width 3600 mm x 23 Passage between the uprights in length 3600 Passage between the uprights in width 2300 Standard infeed height above press table 750 mm Inlet height adjustment range 620 - 800 mm Quick Tension Plunger Plate: Hollow piston cylinder, variable 4 pcs. on each side Too ...

pressure: 55 t throat: 200 mm stroke: 10-80 mm ram - range of adjustment: 60 mm no. of strokes: 120 Hub/min table surface area: 600x450 mm ram surface: 290x230 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.