powered used for sale

Height-adjustable powered roller conveyor, suitable for pallets and other large packages. The conveyor belt can be adjusted in height and is driven by two motors to distribute the load evenly. See the last image for all dimensions of the conveyor. - complete solidworks and STEP- files available - The powered roller conveyor is divided into two sections, and the division of these sections can be adjusted as needed. - The machine has been used in combination with a bag in box filler. The roller conveyor has been lightly used but is in good and working condition. Please contact for more infromation.

We sell 170 x Dell PowerEdge T340 In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manufacturers ...

We sell 9 new gas engines, zero engine hours. Power as follows described Sale due to going out of business. 2 engines 38 kW - WJPower HMG 320 - SAE 3 2 engines 56 kW – WJPower HMG 434 - SAE 3 3 engines 85 kW – WJPower HMG 634 - SAE 2 2 engines 100 kW – WJPower HMG 645 - SAE 2

Powered role way with built-in Abziehquerfoerderer technical data: intended purpose: Boards length: 1 m rope number: 6 pieces impulse 1.5 kW

Piston diesel operation - almost new

Post driven tools from a Traub CNC lathe VDI 40 As well as some measuring geraete for Traub Rest according to photos Special price

Driven roller conveyor that can be rotated at right angles (90 degrees) by motor drive - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Built: Type: Length of roller conveyor: approx. 1,645m Wide element approx. 75cm Roll length: approx. 60cm Roll width: approx. 5cm Distance between rolls approx.: approx. 5cm Height: approx. 55cm Engine: SEW Length frame: one side approx. 2m, other side unknown (but can be changed anyway by the aluminium profiles Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

Gebhardt Powered roller conveyors roller conveyor 6000-610-550 RA1909 Make: Gebhardt Roller width (RB): 550 mm, Steel rolls Nominal/outer width (NB): 610 mm length: 600 mm Rolls diameter: 50 mm Roller distance 100 mm Overall height frame: 130 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Scope of delivery: without supports Optionally available: Supports Side guides Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 6000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Ampere: 2,00/1,15 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mai ...

Data sheet of retrofit POS. GE 10.10 Roller conveyors, FB = 550 mm Gebhardt, 7,000 mm = FL Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 7,000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 7000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...

Data sheet of retrofit POS. GE 13.25 Roller conveyors, FB = 550 mm Gebhardt, FL = 2.000 mm Type: Gebhardt roller conveyor type 310.01 Year of manufacture: 2007 Order number: 070 113 / 2007 Max. Weight: Gzul. = 30 kg / m Weight: G = 17.5 kg / m Length: FL = 2.000 mm Conveyor width: FB = 550 mm Overall width B = FB + 60: B = 610 mm Side profile: Aluminium Conveyor speed: v = 0,35 m/s Role: Type: G6/50 sliding storage Support roller pitch: 100 mm Drive: motor type W30DT71D4/IS Power: 0.37 kW Speed: 42 Design/wave: M1 B, 20 x 40 Voltage: 230/400 V Power: 1.15 A Support: ask without support, if needed Condition: functional and visually good condition Features: condition: very good (used) Construction year: 2007 Conveying length in mm: 2000 Nominal / outside width in mm: 610 Roll width in mm: 550 Roll division in mm: 100 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Amper ...

Stock number: 3848 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.109 Machine NO.: 2 Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor Power Driven Tools 70Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

x-travel: 600 mm y-travel: 450 mm z-travel: 450 mm b-axis: +-115/+30 c-axis: nx360 turning speeds: 20.000 U/min Tool adapter: HSK A 63 rapid traverse: 20 m/min Tools changer: Random 75 Pos. table-size: 350×350 mm table weight: 200 Kg Control: HEIDENHAIN iTNC 530 total power requirement: kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3850 Angetribende Tool Manufacturer: Eppinger , Type: 4.201.099 Machine NO.: 5, Specifications: Size VDI 40 Winckel 90 Insert Type ER32 Internal Cooling Speed max 5000 rpm Motor power driven tools 70 Nm Preci-Flex tool system Okuma LT300-M, Okuma LT15-M, Okuma LB300-MYW, Okuma LB300-M,

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm Control: SIEMENS SINUMERIC 840D table-size: 2.900x700 mm table weight: 2.150 Kg tool adaptor: SK 40 DIN 69872 workpiece length - max.: 300 mm workpiece weight: 6 kg workpiece dia.: 80/130 mm : 30 fach main drive: 18,4/14 kW speed: 14.000 mm/min rapid traverse: 40 m/min feed: 40 m/min Machine on: 18.859 h Spindle hours: 5.666 h internal coolant system feed: 40 Bar/600 l Chip coveyor: inkl. total power requirement: 55 kW weight of the machine ca.: 14.520 kg dimensions of the machine ca.: 10.280 x 7.230 x 3.042 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4.000 mm y-travel: 2.100 mm z-travel: 1.000 mm taper ISO: ISO 50 Number of revolutions: 5.000 rpm table-size: 4.020x2.010 mm table weight: 12.000 Kg Control: Heidenhein iTNC530 Tools place: 32 fach rapid taverse: 15.000 mm/min total power requirement: kW weight of the machine ca.: 39 t dimensions of the machine ca.: 10680x5600x5100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 2000 mm table load: 200 t total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3500 mm table width: 1750 mm table load: 350 t total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mm y-travel: 2500 mm table-size: 2.000 x 2.500 mm table weight: 20.000 Kg B-axis (table): (0.001º) mm w-axis: 2000 mm z-axis: 800 mm rapid taverse: 10.000 mm taper ISO: ISO 50 turning speeds: 0-2.000 U/min spindle drive motor: 37 kW Torque: 12–183 U/min 0 internal coolant system feed: inkl. handwheel: HEIDENHAIN HR-410 total power requirement: 74 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.050 mm y-travel: 610 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 Distance between table and spindle: 100-710 mm table-size: 1.200 x 600 mm table weight: 1.200 Kg rapid travel x/y/z: 30.000/20.000 mm/min feed: 12.000 m/min spindle taper: BT-40 spindle turning speed range: 60 - 10.000 U/min spindle drive: 7,5/11 kW Tools changer: 20 pos. Internal cooling system: 20 bar Chip coveyor: 2 handwheel: HEIDENHAIN HR-410 tool diameter: 100 mm tool length - max.: 320 mm weight of tools max.: 10 kg total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2.900 x 3.420 x 2.888 m Complete installation 4th axis - Rotary table Golden Sun CNCT 321 (4th/5th axis)- Rotary table diameter 200 mm. - Rotary table tailstock - ZF box - Electrical cabinet air conditioning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 4000 mm table load: 80 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Mechanic Maschinenbau Hahn, electric heavy-duty railcar with lifting cylinder -Type: Railcar MTA, load capacity 20000 kg -Roller spacing: 2150 mm -Cylinder spacing: 2245 mm -Lift height: 110 mm -Drive units: 2x Demag geared motors type ZBF80A 4 B020 gearbox type ADE40TD -Individual components: see photos -Overall dimensions: 2860/2440/H610 mm -Empty weight: 2200 kg

Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Seacom, railcar with drive -Type: GWN 40t -Weight increase: two railcars coupled together to 80t with ID36864 -Platform: 4000 x 2500 mm -Load capacity: 40,000 kg -Drive: with electric geared motor -Track width: 1500 mm (1420/1580) -Wheel arch width: 80 mm -Overall dimensions: 4060/2500/H770 mm -Empty weight: 2400 kg

Railcar, platform wagon, heavy-duty transport wagon, transport wagon, heavy-duty wagon, electric heavy-duty rail wagon, rail wagon, trailer -Manufacturer: Plan, railcar with 48-volt drive and battery -Type: EGB 50 -Platform: 4640 x 2000 mm -Load capacity: 50,000 kg -Drive: with 48-volt electric geared motor -Track width: mm -Wheel arch width: mm -Dimensions: 2000/4640/H770 mm -Empty weight: 4140 kg

Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging, 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-48621-263

Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-48621-246

Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-48622-246

Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging, 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-48622-97

Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-48622-47

Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging, 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-48621-97

Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-48621-47

Battery-powered vehicle, complete with fast charger, 48 volt lithium battery, range 50 km, maximum speed 45 km/h, never used and packed in its original packaging, 0 hours Overall dimensions: 1800 x 750 x 700 mm Weight: 50 kg Auction-ID: A7-48622-263

in different versions with 4x disassembled tools in box (return of repair quote, this is included) Auction-ID: A1-48414-37

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This lot has 3 Bbq Boats that are all 3 electric powered, all boats equipped with a removable roof and equipped with a gas bbq and seat cushion. 2 of the 3 boats are 12 Person and 1 boat is 15 Person. Leaks are currently present. Auction-ID: A1-47408-127