power plant used for sale

Fat Baking Appliance Roka / Kippfix T 40-E Fat baking station T 40-E Easy to use for approx.: 360 pcs/hr. donuts / doughnuts 1 baking basket & 1 steam lid Drip tray right 5 ALU digestate carriers Robust technology Connection 400V, 16A-CEE plug Used device

Fat baking machine Reimelt EL 6/1000S-2 Fat Baking Machine with pass pass 1/1000 S for piping cakes and donuts Turning device with automatic removal device Extractor hood with extinguishing system device Stainless steel version Connection 400V, 63A-CEE plug Approx. dimensions: 5400 x 1310 x 1600 mm, WxDxH Used machine

Motor: 5.5 kW Speed: 2980 rpm Input diameter: 25 cm Output dimensions: 30 x 20 cm With mounting bracket With control box

used sourdough plant Isernhäger B 300Â Product descriptionManufacturer : IsernhägerType : B 300Sourdough stirring kettle Sourdough containerIsernHäger the baking culturecompletely in stainless steelKettle capacity 300 liters Mobile on rollsDetails see pictures.

This is an opportunity to acquire a complete, ready-to-restart feldspar processing plant and open-pit quarry.The facility has been in operation since 1909 . The operation was closed in early 2023 for strategic and market reasons — not due to any fault in the asset itself. The site includes a fully equipped processing factory, an open-pit quarry with an active environmental and quarrying permit valid until 31 December 2052 all buildings, and approximately 26 hectares of land. The quarry permit is transferable to a new owner. Key Points : - High-value feldspar deposit: Mix of potassium and sodium feldspar (50/50). Low iron content of 0.20% in grinding plant output and 0.14% at the open-pit face. - Strong proven yield: 17,000 tonnes per blast. Approximately 2.6 tonnes of feldspar per cubic metre of solid rock. - Crusher output: 0.4 mm particle size. Capacity of 40 tonnes per hour. - Gri ...

more information on request

With Ernst KG oven, 250 degrees Celsius, interior space 15m3, 380/230v. Dimensions L6150xW2340xH3200mm. Overhead conveyor system. Including various powder coatings Auction-ID: A1-44302-10

Component Manufacturer / Model Year Capacity / Notes Condition Depalletiser "KETTNER PRESS UNI ABSCH Komm.Nr. 96/0143/037" — Can depalletising — start of line Good — annual overhaul Rinser (water / ClO₂) MEYER Typ: Hyet 2020 25,000 c/h Good — annual overhaul Filler — Isobaric CO₂ "KHS Inofill CAN DVD 50 (0.5L, 0.33L, Pint)" 2020 "25,000 c/h CO₂ atmosphere, foaming device, buffer tank" Very Good — 2020, annual overhaul Seamer FERRUM F 08 2020 25,000 c/h Very Good — 2020, annual overhaul Full Can Inspector "HEUFT SPECTRUM VX TI 36 Level control" 2020 "25,000 c/h Full level + quality inspection" Very Good — 2020, annual overhaul Tunnel Pasteuriser "NIKO Typ: 095.31.152.100.1 Nr. 41540/96" — Post-fill pasteurisation Good — annual overhaul Can Packer Included in line 2021 Multi-pack formation Good — annual overhaul Palletiser Included in line 2021 End ...

Used line for bottling milk into cartons from Elopak type E-PS1200UC ( manufacturer USA ) The line fills cartons with a capacity of 500ml and 1000ml. Capacity 12,000 cartons/h. Year of manufacture 2011. The line includes: Filler with carton former from Elopak type E-PS120UC. Power supply 380-480V 50/60Hz Conveyor type CM/FT Packing machine type CM/TP 25-B 400 Palletizer type CPA Dry lubrication system type DT Standard 16-20 T Elofoam unit type Foamatic A2 and BW Videojet Printer Videojet Printer Videojet Printer Cork Application System Type ICS1 Single Capsorte ECO activator type E-PS EC082 ECO activator type E-PS EC082

On offer is a used counter-pressure bottle filler from the manufacturer Holdefleiss. As you can see in the pictures, the fountain pen is in a well-maintained and well-maintained condition and has been used in a small brewery so far. Technical data: - Manufacturer: Holdefleiss - YOC 1971 - 24 filling stations - Crown cap with 6 stamps - Height of the bottle plate to the centering bell filling device: 30 cm - Format: Euro bottle, NRW The bottle filler comes with extensive spare parts when you buy it. The technical documentation for the filler is also all available. If you have any further questions, please feel free to contact us.

Plant Details - Plant manufacturer: Stetter - Year of construction: 1980 Main Components - 2 mixers, each 1.5 m3 capacity, model Teka THZ2250A (one fitted with Kniele rotor) - Control system: Simma CMS Control 8 - Scrapper: Elba RSA70, built in 1997 - Auxiliary heater: Certuss Junior 850 - Recycling plant: Klarfix KSW60, built in 1989 - 4 binder silos, each 100 tonnes capacity (2 of which are shared) Find more here - / Contact us at -

245 x 150 x 180 cm

Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat manufacturing, blind manufacturing -Profiling plant: Replacement stations for ID26309 -Profiling machine: heavy-duty design, used for manufacturing slats/blinds -bottom profiling stations: 5 pieces -Drive shaft: Ø 35mm -Dimensions: 4x 700/390/H400 mm 2x 300/200/H160 mm -Weight: 702 kg

circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 15 sieve inserts -Type: Perflux for the production of grinding wheels -Sieve inserts: size 42 my to 250 my, see photo parts list -Screening machine: Dimensions 1530/1000/H2130 mm -Transport dimensions: 1600/1300/H2130 mm -Weight: 414 kg

circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 5 sieve inserts -Type: Perflux for the production of grinding wheels -Sieve inserts: Size 60 my to 2360 my, see photo parts list -Transport dimensions: 1200/800/H670 mm / 1200/800/H800 mm -Weight: 115 kg

thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Window processing line, CNC window manufacturing plant, window angle machine -Manufacturer: Gubisch, Saw unit right left from window manufacturing plant type DST H -Motor: Fimec type H80SB25EF 4 kW / 2800 rpm -Shaft: Ø 30 x 70 mm -Saw blade: Ø 345 mm -Price/Fee: complete -Dimensions each: 470/410/H425 mm -Transport dimensions: 970/500/H425 mm -Weight: 87 kg

Window processing line, CNC window manufacturing plant, window angle system, clamping device -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 180 mm -Geared motor: SSB type SSB DS-SgFFH008 0.25 kW / 405/57 rpm -Encoder: ferrocontrol SAE-1020 H -Number: 2x clamping device available -Price: per piece -Dimensions: 850/450/H240 mm -Weight: 42 kg/pc.

Window processing line, CNC window manufacturing plant, window angle machine, clamping device, pneumatic clamp -Manufacturer: Gubisch, clamping device from window manufacturing plant type DST H -Stroke: 120 mm -Clamping cylinder: airtec HM-25-120 -Number: 2x clamping device available -Price: per piece -Dimensions: 560/225/H80 mm -Weight: 5 kg/pc.

Used juice bottling line. LINE WITH A CAPACITY OF UP TO 12,000 BOTTLES/HOUR – production capacity for 330 ml bottles 1. Round bottle with a capacity of: - 250 ml – line capacity 9,000–12,000 bottles/hour – round bottle - 330 ml – line capacity 9,000–12,000 bottles/hour – round bottle - 750 ml - line capacity 5,000 bottles/hour - round bottle 2. Twist-off cap: - diameter 43 mm - diameter 38 mm 3. Label types: - cold glue (two-piece) Line configuration: 1. DNB-15 semi-automatic bottle depalletizer. 2. PBSz – 01 - 40 bottle rinser. 3. STORK VS 32 bottling monoblock. 4. AUTOMATIC TWIST-OFF CAPSULATOR with steam injection function, automatic, in-line capping machine (capsulator) model GG100. 5. KRONES BONOMATIC rotary labeler for cylindrical products. 6. VENUS APB-15 automatic bottle packing machine. 7. Videojet CIJ printer – model VJ 1620 8. LOB- ...

For sale is a small complete filling line for vinegar or oil in plastic bottles. Currently, the line is at 0.75 ltr. cylinders and has a maximum output of 4,000 bottles/h. The entire plant consists of the machines listed below: 1. Bunker for empty plastic bottles, about 6m long, capacity: about 400-600 containers 2. Kamman bottle sorting system type K23F Machine ensures that the bottles to be filled are transported out of the machine vertically, with the mouth facing upwards Sorting capacity: approx. 3,000-6,000 pieces/h 3. Conveyor belts 4. Leicht vacuum filler, make Cobert type Olimpia20/95 With 20 filling stations Dimensions: LxWxH: 1,520x1,250x2,330 mm Possible bottle diameter: 55-120 mm Built in 1989 6. Inkjet encoder, make REA-JET, for applying the lot marking or best-before date coding to the filled and sealed bottle Year 2008 5. Capper for plastic c ...

Galvanizing plant Composed of Immersion washing Ultrasonic Cleaning Galvanizing tanks About 9 meters. linear Installation size approx. 12500x2000x2000 mm Auction-ID: A7-45347-656

ZANTINGH Format SVP 950 – Combined Heat and Power (CHP) System General data: Manufacturer: Zantingh Model: Format SVP 950 Fuel type: Gas Number of cylinders: 12 Motor power: 7.5 HP Weight: approx. 2000 kg Dimensions (L x W x H): approx. 4000 x 1500 x 2000 mm Equipment: Control panel: yes Condition: Untested Description: Combined Heat and Power (CHP) system designed for simultaneous generation of electricity and thermal energy. The unit operates on gas fuel and is suitable for industrial or energy recovery applications, providing efficient energy utilization. Auction-ID: A7-45351-39

Galvanizing plant Composed of Immersion washing Ultrasonic Cleaning Galvanizing tanks About 14 mt. linear Installation size approx. 12500x2500x2000 mm Auction-ID: A7-45347-655

SALE ONLY OUTSIDE GERMANY. Complete production line, consisting of: LAWECO Lift OEST glue mixing plant BÜRKLE CBM1400 - Brushing machine BÜRKLE DAK1300 - Glue Applying Machine KRAFT Disc Conveyor KRAFT Paper Coater SERGIANI LAS230 - 10ET Press Bonding Station Pruning station Laying station Stacking Auction-ID: A1-45406-10

Fat Baking Machine Jufeba UFD-8 Continuous system / Fat baking machine with skin pass for spritz and donuts Turning device with automatic removal device with grease tank Extractor hood with extinguishing system device Connection 400V, 63A-CEE plug Used machine

Glass Bottle Filling Line 1000 bph With Isobaric CICE Careddu Filling Block This CICE Careddu GOLD DPS 6/6/1C is a compact rotary triblock bottling machine integrating 6 rinsing stations, 6 isobaric filling valves, and 1 crown capping head for hygienic packaging of beer in glass bottles. The system ensures controlled counterpressure filling to with air pre-evacuation with CO2 maintaining carbonation and minimizing oxidation during the bottling process. Filling block has Siemens S7 PLC control system. Filling bloc has CIP system for sterilizing equipment inside and outside with 85C hot water. The line contains also rotating infeed table where empty bottles are manually places, CICE Careddu Compatta labelling station for self-adhesive labels. It has a one roll fed label station and it is intended for the application of one label per product, typically used for front labelling, iden ...

For sale: a complete waste recycling plant, fully equipped with automated sorting,shredding, separation, and material recovery systems. Overall Process Summary 1. Feeding and battery detection (WeSort AI) with pre-shredding and screening 2. Ballistic separation into flat fraction, rolling fraction, and fines 3. Multiple NIR sorting stages (P2000 / PV2000 / P2800) for PVC, EBS, Wood, PP/PS/PE/EPS 4. X-Ray mineral sorting, ISS Eddy Current separation, Zig-Zag air classification, overband magnets, flip-flow screening 5. Post-shredding with Lindner Komet and SRF dosing with secondary shredding 6. Final SRF/EBS discharge with ferrous and reject handling 7. Manual sorting cabin with dust extraction (Schuko filter system) 1. Feeding and Pre-Treatment - Feeding crane - Feed bunker - Intermediate feed conveyor and screen feed conveyor - Screen and screen discharge conveyor - Analysis  ...

consisting of 1x cooling water pump unit, cooling capacity 260 Kw, equipped with 3x 2000 ltr cooling water tanks, Bitzer cooling compressor, 4x circulation pump, control box, floor area 4400x2500 mm, height approximately 4100 mm, 1x Güntner condenser on the roof, equipped with 8x fan, condenser size (LxWxH) 7500x2400x2700 mm, Please note! pick up by appointment, piping not included, refrigerant has already been drained, Auction-ID: A1-43992-26

consisting of 1x cooling water pump unit, cooling capacity 261 Kw, equipped with 3x 2000 ltr cooling water tanks, 2x Bitzer cooling compressor, 4x circulation pump, control box, floor area 4400x2500 mm, height approximately 4100 mm, 1x condenser on the roof, equipped with 8x fan, condenser size (LxWxH) 6500x2500x2200 mm, Please note! pick up by appointment, piping not included, refrigerant has already been drained Auction-ID: A1-43992-27

granulate drying installation, to be combined with lot 23/24/25, Please note! Pick up by appointment Auction-ID: A1-43992-292

consisting of 1x cooling water pump unit, equipped with 2x 3000 ltr cooling water tanks, 2x circulation pump, control box, floor area 3700x2400 mm, 1x condenser on the roof, mounted on steel frame, equipped with 12x fan, condenser size (LxWxH) 12300x2400x3000 mm, water atomization, Please note! pick up by appointment, piping not included, refrigerant has already been drained Auction-ID: A1-43992-30

With filter system ESB type AA 600 Compressed air protection class: IP54 Vibrating motor: 2 x 0.75 kW Fan motor: 2.2k W Total connected load: 6 kW Filter area: 2 X 72 m² Number of cartridges: 2 X 4 Extraction capacity: 6000 m³/h Air pressure maximum.8 bar Cleaning pressure: 7 bar, Including: 2 x ZA 02 lifting device, 8 Automatic powder gun type PG 2-AX, ESB control cabinet type 60191, Make number 600 Auction-ID: A1-45447-1

• GROWI wood splitting plant • Type: GAS 850 • Year of construction 2025 • Serial number: 2025048 • Stationary firewood processing plant • Hydraulic splitting drive • Integrated chainsaw unit • Longitudinal conveyor belt / discharge belt • Robust steel construction • Control station with hydraulic control • Emergency stop available • CE version • Suitable for professional firewood operation • High work performance • Stable feet • Well-maintained condition • Ready to use • Ideal for forestry and firewood operations Auction-ID: 04C-FSE-2

A compound feed line is available. 1) Bühler hammer mill. 2) Bühler DPAB pellet press, year of manufacture: 1979. 3) Loos rapid steam generator, year of manufacture: 2000, capacity: 300kg/h, max. operating overpressure: 13bar. 4) Gebrüder Jensen weighing and mixing unit, year of manufacture: 1979. Production capacity range: approx. 5-10t/h. Including the associated drag conveyors and bucket elevators. Documentation available. An on-site inspection is possible. Individual sale by arrangement is possible.

consisting of: base frame, 2 storage containers, stainless steel, tank container, Fabr. WERIT, osmosis unit, type: SILHORKO, built in 1995, control cabinet system, Fabr. RITTAL, with piping system, filter, pump and valve technology as well as 2 tipper bodies, wheeled

PAPER CARTON SORTER good condition Available now! cheap to give away

2 units air classifier type Nihot - 2 x 2 pieces blower - 2 x 1 piece airlock cheap to show off

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

Professional organic waste recycling and fertilizer production line available for immediate sale.This complete installation is designed to transform poultry, cattle, or pig manure and organic waste into high-quality granulated organic fertilizer pellets. EcoCert compliant output. Produced in 2022. Fully operational and well-maintained. Technical Specifications - Capacity: up to 5 tons per hour - Condition: Fully operational, well-maintained - Year of Production: 2022 - Output: High-density organic pellets, EcoCert compliant Complete Production Process Compost Processing - Grinding - Mixing with Probiotic and Additive injection capability - Granulation - Drying - Cooling - Automated Packaging Applications - Poultry manure processing - Cattle manure processing - Pig manure processing - General organic waste recycling Key Investment Benefits Fast ROI: Converts waste management cost ...

The ITT Jabsco Pureflo Lobe 24250-4310 is a positive displacement rotary lobe pump with sanitary design which can handle dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: 0,936 liter per revolution. Maximum nominal capacity: 39,9 m3/h. Inlet connection: 3 RJT. Outlet connection: 3 RJT. Maximum product pressure: 6 bar Maximum pump speed: 700 rpm. Maximum temperature: 110 °C. Previous used in a Casein plant. The current motor with this pump is 7,5 kW - 1.450 rpm - 400 V - 50 Hz - 14,3 A.  ...

Stock number: D1240, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: RO plant, Standing: In stainless rack, Dimensions: L 720 x W 650 x H 1700 mm., Capacity: 500 l/h, Manufacturer: HOH Best Water Technology, Type: Duo 2020, Model: RO 2-Pass 500, Documentation: Yes

Used green bean slicer from the French company Femia type C 32. The machine cuts beans to a length of 26.32 or 36mm. Cutting length capacity 2-2.5 T/h. Acid-resistant design. 5 pieces available.

Used Stone Making Line Year of Make: 2006 Consisting of: - Attachment mixer: Kniele 0.5m³ - Core concrete mixer: Kniele 2m³ - 6-fold inking system (granules), make Finke - Hess Stone Paver Multimat RH 1500-2A including R&W Height Measuring Station SHV-500 - Hess transfer table - Rotho – drying chamber - Complete dry side with packaging system - 3,000 pieces Assyx underlay boards 1400x1100x50mm Used block-making, block-production, paver production plant Year of manufacture: 2006 Consisting of: - First layer mixer: Kniele 0.5 m³ - Core concrete mixer: Kniele 2 m³ - colouring system with 6 colors (granulate), Finke brand - Hess Multimat RH 1500-2A block-making machine including R&W SHV-500 height measuring station - Hess sliding table (finger car) - Rotho – curing chamber - Complete dry cycle with packaging system - 3,00 ...

Used transfer machine from Baader Linco. The device automatically transfers birds from the slaughter line to the evisceration line. Birds are released from the slaughter line by cutting off their legs with a built-in cutting unit and re-suspended at the ankle joint on the eviscerating line.

Terlet Terlotherm T0-4 Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 32 liter. Number of scraper rows: 4. Inner vessel: 0 / 10 Bar - 0 / 150 °C - 32 liter. Jacket #1: -1 / 4 Bar - 0 / 150 °C - 2,6 liter. Jacket #2: -1 / 4 Bar - 0 / 150 °C - 4,6 liter. Motor: 3 kW - n1: 1.456 rpm - i: 43,33 - n2: 34 rpm - 380/400 V - 50 Hz - 6,60 / 3,85 A. Product inlet: 50 mm. Product outlet: 50 mm. Ground clearance: ± 556 mm. Cy ...

Dough Sheet Former Rinc Dough Extruder Three Roller Former - Three rollers of dough sheet former - Manufacturer: beef - Roller Ride 50cm

REDES TPS5 water distribution installation Slat filter Sedimenter Reception in big bag Seller can help with loading Auction-ID: A3-43515-19007

Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

System for the pressureless production of aqueous chlorine dioxide solution This system enables the pressureless production of an aqueous chlorine dioxide solution. The two starting materials are fed into a reaction vessel one after the other via peristaltic pumps. The liquid level in the vessel is monitored by a level probe, ensuring a correct mixing ratio of 1:1. The operating time of the peristaltic pumps is also monitored and controlled by the software to ensure precise dosing. After the reaction time, the resulting chlorine dioxide solution is rinsed with water in the storage tank and then dosed to the point of use using a diaphragm dosing pump and a dosing valve. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Water treatment - chlorination, Capacity: 18 g/h ClO2, Dosage volume: 9 l/h against 7 bar, ...