Mineral Processing Plants

process engineering / machines and plants for process engineering

Manufacturer:

Model:

Type of machine: Mineral Processing Plants

item-No.: 168926541

Quantity: 1

Date: 16.04.2026

Location: Sweden

Price:


Seller-item-No.:8670140

This is an opportunity to acquire a complete, ready-to-restart feldspar processing plant and open-pit quarry.The facility has been in operation since 1909 . The operation was closed in early 2023 for strategic and market reasons — not due to any fault in the asset itself. The site includes a fully equipped processing factory, an open-pit quarry with an active environmental and quarrying permit valid until 31 December 2052 all buildings, and approximately 26 hectares of land. The quarry permit is transferable to a new owner.

Key Points :

- High-value feldspar deposit: Mix of potassium and sodium feldspar (50/50). Low iron content of 0.20% in grinding plant output and 0.14% at the open-pit face.
- Strong proven yield: 17,000 tonnes per blast. Approximately 2.6 tonnes of feldspar per cubic metre of solid rock.
- Crusher output: 0.4 mm particle size. Capacity of 40 tonnes per hour.
- Grinding fractions: FF20, FF30, FF60, and FF150. Dry grinding process.
- Max permitted output: 150,000 tonnes per year. Total reserve of 1.8 million tonnes for the next 30 years.
- Established customer base
- Multiple product possibilities: Feldspar powder, crushed aggregate, road base, topping, stone flour, yard gravel, ballast, and more.
- 26 hectares of land: Factory area with surrounding forest and the open-pit quarry with surrounding forest land.
- Full site infrastructure: Offices, staff facilities, workshop, cold storage halls, residential accommodation,wash platform (2020), and a Vattenfall transformer station on site.

Plant and Buildings Included

- Cold Storage Hall G: Open steel hall with drive-through vehicle access, used as warehouse.
- Cold Storage Hall A: Steel hall, used as warehouse.
- Cold Storage Hall B: Part of the old works.
- Mill Building 3: Built in the 1940s. Contains fine crusher mill.
- Mill Building 4: Built 1979. Contains grinding and screening mill.
- Coarse Crusher: For crushing of coarse material.
- Office Building: Offices, staff kitchen, conference room. New ventilation system and two new heat pumps.Installed 2020.
- Residential House: Ground floor overnight accommodation apartment.
- Staff Facility Building: Canteen, kitchen, changing rooms, sauna, showers.
- Workshop and Smithy: Used for maintenance and light repairs. Radon remediated.
- Wash Platform: Installed 2020 with water, drainage, and oil separator.
- Quarry Staff Hut: Small building at the quarry used as staff rest area.

Open-Pit Quarry Facts

- Quarry name: Limberget
- Rock type: Pegmatitic / granitoid rock (Malingso granite formation)
- Feldspar type: Mix of potassium and sodium feldspar, 50/50
- Iron content at face: 0.14%
- Yield per blast: 17,000 tonnes
- Feldspar density: Approx. 2.6 tonnes per cubic metre of solid rock
- Distance to factory: Approx. 1.5 km via internal road
- Quarrying method: Topsoil stripping, drilling, and blasting
- Permitted total extraction: Up to 1.8 million tonnes (1.5 million pegmatite, 0.3 million grey rock)
- Maximum annual extraction: 150,000 tonnes per year
- Total reserve life: 1.8 million tonnes — approx. 30 years at full permitted capacity
- Permit valid until: 31 December 2052
- Permit transferable: Yes — a new owner can take over the existing permit

Find more here - /

Contact us at -
Share this machine on Facebook:

Inquiry

Machinery dealer?

Please remit optionally

Send wanted inquiry?

Copy to you?

Save input data

This is an opportunity to acquire a complete, ready-to-restart feldspar processing plant and open-pit quarry.The facility has been in operation since 1909 . The operation was closed in early 2023 for strategic and market reasons — not due to any fault in the asset itself. The site includes a fully equipped processing factory, an open-pit quarry with an active environmental and quarrying permit valid until 31 December 2052 all buildings, and approximately 26 hectares of land. The quarry permit is transferable to a new owner.

Key Points :

- High-value feldspar deposit: Mix of potassium and sodium feldspar (50/50). Low iron content of 0.20% in grinding plant output and 0.14% at the open-pit face.
- Strong proven yield: 17,000 tonnes per blast. Approximately 2.6 tonnes of feldspar per cubic metre of solid rock.
- Crusher output: 0.4 mm particle size. Capacity of 40 tonnes per hour.
- Grinding fractions: FF20, FF30, FF60, and FF150. Dry grinding process.
- Max permitted output: 150,000 tonnes per year. Total reserve of 1.8 million tonnes for the next 30 years.
- Established customer base
- Multiple product possibilities: Feldspar powder, crushed aggregate, road base, topping, stone flour, yard gravel, ballast, and more.
- 26 hectares of land: Factory area with surrounding forest and the open-pit quarry with surrounding forest land.
- Full site infrastructure: Offices, staff facilities, workshop, cold storage halls, residential accommodation,wash platform (2020), and a Vattenfall transformer station on site.

Plant and Buildings Included

- Cold Storage Hall G: Open steel hall with drive-through vehicle access, used as warehouse.
- Cold Storage Hall A: Steel hall, used as warehouse.
- Cold Storage Hall B: Part of the old works.
- Mill Building 3: Built in the 1940s. Contains fine crusher mill.
- Mill Building 4: Built 1979. Contains grinding and screening mill.
- Coarse Crusher: For crushing of coarse material.
- Office Building: Offices, staff kitchen, conference room. New ventilation system and two new heat pumps.Installed 2020.
- Residential House: Ground floor overnight accommodation apartment.
- Staff Facility Building: Canteen, kitchen, changing rooms, sauna, showers.
- Workshop and Smithy: Used for maintenance and light repairs. Radon remediated.
- Wash Platform: Installed 2020 with water, drainage, and oil separator.
- Quarry Staff Hut: Small building at the quarry used as staff rest area.

Open-Pit Quarry Facts

- Quarry name: Limberget
- Rock type: Pegmatitic / granitoid rock (Malingso granite formation)
- Feldspar type: Mix of potassium and sodium feldspar, 50/50
- Iron content at face: 0.14%
- Yield per blast: 17,000 tonnes
- Feldspar density: Approx. 2.6 tonnes per cubic metre of solid rock
- Distance to factory: Approx. 1.5 km via internal road
- Quarrying method: Topsoil stripping, drilling, and blasting
- Permitted total extraction: Up to 1.8 million tonnes (1.5 million pegmatite, 0.3 million grey rock)
- Maximum annual extraction: 150,000 tonnes per year
- Total reserve life: 1.8 million tonnes — approx. 30 years at full permitted capacity
- Permit valid until: 31 December 2052
- Permit transferable: Yes — a new owner can take over the existing permit

Find more here - /

Contact us at -
seller offer No. resale 8670140
Share this machine on Facebook:

Seller


verified user

RESALE member since 2024

For more information about the seller, please send him an enquiry and select the option "Copy to you?".

Inquiry

Machinery dealer?

Please remit optionally

Send wanted inquiry?

(to all dealers for such a machine)

Copy to you?

(copy of your inquiry will be sent to your email address)

Save input data

(Save input data for further inquiries)