power jet used for sale

Mounting SK 30 Incl. cooling manager

CO₂ snow jet cleaning module from ACP – Advanced Clean Production GmbH, designed as a compact unit in an industrial control cabinet. The system works with liquid CO₂ and compressed air and is designed for automated industrial use for cleaning components and surfaces. The system is suitable for precision cleaning in manufacturing, the electronics industry and precision engineering. The device is used and shows normal signs of use due to use. It was in industrial use until recently. Scope of delivery: 1 ACP JetModule in the control cabinet Integrated media supply Integrated CO₂ mini cooler Integrated compressed air treatment CO₂ sensors Operating instructions without CO₂ cleaning heads Without nozzles Without hoses Without other system-specific accessories Type: JetModul Serial number: JM-432/E Year of construction: 2018 Project number: 1001932 Operating voltage: 400 V  ...

Waterjet 2x3m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Used pumps either Knam/H2O 40HP alternative KMT/Ingersollrand SL4 30hp completely overhauled. New surcharge KMT SL5 classic 50PS/37KW 90.000,00 Construction training & service directly from the manufacturer, including

Waterjet 1x2m demonstration plant about 50 hours with comfortable visualized CNC control, and comfortable CAD connection. Cutting table made of stainless steel. The plant is connection, etc. in mint, latest cutting software, AutoCAD Knam/H2O pump 22 HP. 65.000,00 Construction training & service directly from the manufacturer, including

1 ALLIANCE sample high temperature jet dyeing machine, type Colora HT10 capacity 4 to 10 kg (according to the weight and composition of the fabrics)  year 1999 maximum dyeing temperature 140 ºC machine equipped with filter COMEUREG Microprog 40 dye cycle controller winch is ABB inverter controlled circulation pump is ABB inverter controlled with addition vat machine has worked very few hours and is in pristine condition

Oil- steam jet pump similar to oil diffusion pump Manufacturer: Leybold - Heraeus Type: OB 8000B Condition: used, removed from running plant!

Produkbezeichnung, industrial ink-jet printers Manufacturer: Metronic Model: Alpha Jet Year of construction: 1998 Additional information: see also bite photo Information without guarantee

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

Type Overture ES Voltage 230 V (50 Hz) Made in USA Transport dimensions 600x400x500 mm Weight 15 kg

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1989 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled

Showroom machine / exhibition machine CMS Tecnocut - IDROLINE S 2040 Axle experience: X-axis: 4,250 mm Y-axis: 2,000 mm Z-axis: 200 mm C-axis: endless B-axis: +/- 60° Facilities: - 5-axis cutting head JD5Ax for inclined cuts up to 60° and automatic angle correction - Chain conveyor for automatic sand application - Automatic lifting doors to secure the working area - Sand dosator for automatic software controlled sand dosing - Central lubrication - Altitude probe with anti-collision system High pressure pump Greenjet Electric high-pressure pump with directly controlled servo motor Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min DÃ?SE: 0.40 mm max. Incl. assembly / training and 12 months warranty!

CMS Tecnocut Easyline Cutting range / axis experience: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 150 mm Uiaw3u8 C-axis: 630° B-axis: +/- 60° Included equipment: - 5-axis snow head incl. angle correction - Sand dosing and vacuum monitoring - Height scan - CAD/CAM - Laser - Central lubrication CMS Tecnocut GREENJET Highly efficient electric high-pressure pump. Technical data Total current consumption: 34 kW at 5 ltr. / min Power connection: 400 V +/- 5% / 50 Hz Max water pressure 4,150 bar Pressure vessel 1.2 ltr Water passage: max. 5 ltr. / min Opening diameter DÃ?SE: max. 0.40 mm The pressure translator with directly driven servo motor offers the following advantages: + Energy efficient + Proportional power consumption + no maintenance-free hydraulics + 75 dBA + Low maintenance due to 60% less structural components + internal water pump + ...

Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!

The depth bridge is suitable for a column depth of 1,050 mm and a maximum truss width of 40 mm. Included in delivery are: 01x deep bridge, used Material color: orange Total length: approx. 1,058 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 960 mm Technical data for the deep bridge: Shelving system: Nedcon Profile abbreviation: 60 x 40 mm Truss pad: approx. 43 mm Material thickness profile: approx. 1.50 mm Material thickness: approx. 4.00 mm Unit weight: approx. 2.50 kg General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications

Jetstream mixer with tripod Power: 0.82 kW Exx Protection T4 Stainless steel tripod (mobile) height-adjustable, swivelling Switchgear in Exx Powder infeed and dispersion possible Condition very good LWH: 900 x 700 x 1900 mm Weight: approx. 120 kg

Jetzone furnace Manufacturer: CPM WOLVERINE PROCTOR Ltd. Model: SND 1.5 x 202 Year: 2016 Productivity: 450 kg / h Dimensions: 8136 x 3581 x 4376 Heating medium: natural gas Description: A high-speed dryer consisting of two main elements: a fitting equipped with heating and distribution elements, and a production conveyor.

1 PIMATEX high temperature sample dyeing machine type Draw-Lab 140/5, year 1994, capacity 5 Kg, machine equipped with filter and addition vat, SETEX 505 dye cycle controller, circulation pump controlled per SIEMENS inverter, machine delivered fully erected because electrical panel and pneumatics don't need to be disconnected

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch

EKOMEGA pulse jet filter was built by Ekomega S-ka z o.o. in Poland in 2008. The device is designed for dedusting the air of dry and non-sticky dusts that may adversely affect the work of people in their surroundings. Contaminated air flows through the filter cloth inside the machine, causing dust particles to settle on the filter surface. These particles are removed by cyclical pulses of compressed air at low volume and relatively high pressure. The cleaned air is then routed to further processes or discharged into the atmosphere. The dust layer, on the other hand, falls into a chute. All this makes the offered EKOMEGA industrial dust collector an excellent choice for companies operating in the cement, metallurgy or construction industries. The machine on offer is part of a larger EPS production line. It is also possible to purchase the entire technological line, consisting of the fo ...

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle

STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...

MICRONIZER JET MILL MC One Technical Data Nominal Estimated Batch size Process gas Process gas Installed diameter capacity 7 bar 12 bar power 33 mm From 0.1 From 0.2 gr 0.09 Nm3/min 0.18 Nm3/min _ (1.3 inches) to 50 gr/hr to 50 gr (3.18 CFM) (6.36 CFM)

Water Jet Pump Resato PJE-2-4000 Here there is a gebr. Water jet pump that has been standing around unused for over 10 years. The pump costs with an additional pressure converter and an additional control from a cannibalized pump 7,000,-- €. There are also about 100 HD seals. If you want to buy the print translators solo, they cost 1,500 €/piece There is no guarantee, warranty and to avoid misunderstandings the pump must be inspected before collection.

Key data: 6000 mm, 2000 mm

Ref.Nr. 00846 Name of the system: Used waterjet machine Spare parts system Manufacturer Flow Model Foracon WS3-20/602KS Built in 1995 Sheet size 2000mm x 6000mm Achievement 9Kw ( Engine ) 2 pumps (flow) 2 cutting heads Operating hours pump 1 = 19700 h Operating hours pump 2 = 24751 h Incl. sand tower Incl. sludge removal system Renewal of the control system 2016 ( Engelmann company ) Condition of the system was disconnected a week ago Is still under power but cannot be demonstrated because the cables have been cut during disconnection Customer has used the system until the end Submission date Immediately

BHKW engine type HCI534E2 for sale Combustion engine TEDOM type DC16 1-013-826. The motor block was only completely replaced in May 23 It is still entitled to EEG compensation until 2031. Find more here - .ucymachines/ Contact us at - sales@ucymachines

description: For printing of labels, bottles, packaging etc: prints only in black colors, incl. frame Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

Manufacturer: Hackemack, Type: 2540, Year: 1995, Working widht mm: 1300, Working height in mm: 950, Conveyor lenght mm: 11000, Through running hight mm: 90, Thermal output: 2 Register, Feedin speed m/min: 5-20, Belt conveyor: yes, Flat spray nozzle: yes, Round nozzle: Flachdüse, Damper register - items: 2, 1st Damper register kW: 65, 2nd Damper register kW: ca.50, Year :1995

Manufacturer: Venyeskob, Type: Mikrowellen Trockner, Year: 2007, Work piece width min-max mm: 1350, Min.-max. workpiece length in mm: 150, Length mm: ca 6.774, Channel length in mm: 6000, Revisionsklappen: yes, Kanaltemperatur Grad: ca 30°C, Umluftleistung m³/h: 3.000, Ex geschützt: no, Working widht max mm: 1300, Working height in mm: 95, Conveyor lenght mm: 6800, Through running hight mm: 100, Belt conveyor: yes, Electrical power consumption kW: 13, Year :2007

Manufacturer: Purete, Type: PRT-I3613, Year: 2020 neu, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Channel length in mm: 6.000, Revisionsklappen: yes, Min.-max. workpiece height in mm: 2 - 80, Working widht max mm: 1.320, Conveyor lenght mm: 6.000, Feedin speed m/min: 0 - 20, Rod transportation: yes - 38,7 mm, 1st Damper register kW: 36, Electrical power consumption kW: 44, FREE TEXT: Heizung über Elektro - auf Anfrage über Wasser und Öl möglich, Year :NEU

Manufacturer: Rippert Düsentrockner, Type: DTK 041, Year: 2004, Work piece width min-max mm: 800, Channel length in mm: 7000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: 50, Umluftleistung m³/h: 4600, Ex geschützt: no, Temperature regulation: yes, Min.-max. workpiece height in mm: 60, Conveyor lenght mm: 8000, Feedin speed m/min: 1-6, Belt conveyor: yes, Air speed in jets: 25 m/s, Flat spray nozzle: yes, Damper register - items: 1, Year :2004

ECKERT Opal WaterJet COMBO waterjet cutting machine was built in 2011 in Poland by ECKERT AS Sp. z o.o. The machine, designed for precision machining of workpieces with a maximum thickness of 250 mm, combines all the benefits of plasma and waterjet cutting. The machining process is performed on a robust, large work table by means of a powerful cutting head. All table travel components are protected by bellows guards to ensure uninterrupted operation for many years of use. The design made of high-quality closed steel profiles, in turn, guarantees the highest stability during even the most demanding challenges. The ECKERT Opal COMBO WaterJet is offered with, among others, CAD/CAM software and a 37 kW high-pressure pump. Technical specifications of the ECKERT Opal WaterJet COMBO water cutting machine - maximum workpiece thickness (water machining): 250 mm - feed rate: 25000 mm/min - w ...

INTERMAC PRIMUS 184 3D waterjet cutting machine was built in 2022 in Italy. This extremely powerful machine is designed for precise 3D machining of any type of glass. The process is performed by a 5-axis cutting head, which offers unlimited machining capabilities. It allows, among others, the cutting of complex patterns and the cutting of holes of any size with extreme ease. In order to guarantee excellent stability during even the most intensive challenges, the machine design is made of stress-relieved stainless steel. The movement of the X and Y axes is performed on hardened and ground tooth guides of high precision. On the other hand, the Z-axis moves via a prismatic recirculating ball screw. All the table’s travel components are protected by leak-proof covers. The offered PRIMUS 184 WaterJet also features an extensive equipment, which includes e.g. intuitive CAD/CAM software, ...

Stock number: R1111, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Jetstream mixer, Agitator type: 3-bladed propeller, Agitator placement: For top flange mounting, Head: D 300/400 mm., Shaft lenght: 1700 mm., Shaft diameter: D 110 mm., Motor: 37 kW - 400/690 Volt - 1480 rpm., Manufacturer: Sigma, Type: Jet RS-GS 22000

Auction-ID: A7-49599-36

JETFAST screws various sizes 10 boxes Auction-ID: A1-40897-171

Auction-ID: A1-49695-41

Waterjet machine Flow Incl. new maintenance kit pump incl. documentation Year of Make: 2006 Manufacturer: FLOW Europe GmbH Manufactured Date: 11/05 Working area: (L x W x H): 3600 x 2000 mm Continuous working pressure: 3,800 bar High Pressure Pump: FLOW – Hyplex Pump Model HyPlex 50 Hours: 4342 hours Maintenance intervals: Regular according to maintenance schedule Last service at: 4102 hours (major pump maintenance) Software: Flow-Master PC Software Flow PATH Module, Version 6.0 Flow CUT Module, Version 6.0 Flow Master 6.0 Professional (FlowNest) Hardware clamping and clamping device, Flow, set-up and positioning aids with laser pointer, Devices 1x Sand Silo 1x Sand mixer unit Flow 1x Water Softening (WTS) 1x collision sensor defective Documentation package, Various spare parts, all pre-pipes and cables

A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.

Yamaha GP800 Jetski, Jetski not tested, condition unknown, cart not included Auction-ID: A3-46159-30474

Jetski Yamaha waverunner XL700 , in working order , life jacket included , trailer included Auction-ID: A3-46159-30475

Pero Washing Machine 2600/016GR.2W-4667

Inv. Num. : 6800 Type: 6020 Producer: RT Created: 2016 Parameters: Work table length: 6000 mm Work table width: 2000 mm Machine weight: 8000 kg Equipment: 3D Head TECHNI Possibility of 3D cutting

Full overhauled valve TEC JET 50 PLUS with no use after maintenance. Ready to send.

A complete Soitaab waterjet cutting system, which until the year 2023 was only a demonstration machine, is available. 1) Main system Soitaab Thesis 2040, year of manufacture: 2014, cutting dimensions X/Y/Z: 4000mm/2000mm/200mm, control system: Soitaab 905unoS, control system year of manufacture: 2023, overall system dimensions X/Y/Z: approx. 5400mm/3300mm/2100mm. 2) High pressure pump KMT Neo 50, year of manufacture: 2022, max. operating pressure: 4100bar, last service: 09/2025. 3) Abrasive unit KMT Feedline V, year of manufacture: 2015. Including a storage container Müller, container capacity: 1000kg. Documentation available. An on site inspection is possible.

ECKERT Opal WaterJet CNC waterjet cutting machine was built in 2019 in Poland by ECKERT AS Sp. z o.o. The machine is designed for precision machining of a wide range of materials, i.e. metal, stone, wood and plastics. Workpieces with a maximum thickness of 150 mm are machined by means of a reliable cutting head with anti-collision and tool height sensor. During cutting, only water is used, making the process free of harmful fumes and safe for the environment. The ECKERT Opal WaterJet is distinguished by its robust water table with a double WEMA grating system. The design made of closed steel profiles ensures high stability during even the most intensive challenges. All travel components, in turn, are protected by bellows covers. This solution guarantees uninterrupted operation of the machine for many years of use. The ECKERT WaterJet is operated via a state-of-the-art industrial co ...

Inv. Num. : 8749 Type: M2-3120B Producer: FLOW Created: 2011 Parameters: Table dimensions: 2000x3100 mm Spindle power: 6.6 kW

Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible.