polish machine used for sale

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Polishing, polishing machine, grinding machine, grinding Bock With 380V connection. Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available. Errors in the description and intermediate sale is reserved. Shipping with freight forwarding.

NEW MACHINE - double sided belt linishing and polishing machine, different configurations possible - linishing / linishing - linishing / polishing - polishing / polishing Motor 4, 5.5 or 7.5 kW, polishing wheel max. 120 x 500 mm, max. diam. contact wheel 400 mm, linishing belt 50 x 3500 mm - 3 different speeds can be choosen: 700, 800, 900, 1000, 1120, 1250, 1400, 1600, 1800, 2000, 2240, 2500, or 2800 rpm; NEW MACHINE

Attachment polishing machine HAU HR 4 for rotary parts up to max. 200 mm diameter, with 2 processing units, units equipped with overtaken sprueh guns for liquid polishing paste, disc diameter max. 400 mm, disc width max. 120 mm, shaft diameter 35 mm, machine similar illustration; overhauled, ready for use

Polishing / buffing machine HAU HR 4 for circular parts up to 200 mm max., with 2 working units, units equipped with reconditioned spray systems for liquid polishing compound, wheel diam. max. 400 mm, width polishing wheel max. 120 mm, shaft diam. 35 mm, machine similar to picture ; reconditioned

2-station polishing station make LÖSER type FS 384 G2Machine -No: 268 built in 1989Technical specifications:Number of polishing stations:2Polishing disc diameter approx. :240 mmTable length: 2750 mmTable width: 150 mmPassage height: 150 mmPassage height: 100 mmAbrasive belt width: 2500 x 150 mmConveyor belt feed: 2.5 + 5.0 m/min.Conveyor belt: 3000 x 150 mmConnected load: 380 V, 50 Hz:Drive power: 5.5 kWWith- Polishing stations with liquid paste gunsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC gest. Portal grinding and polishing machine make HAU-SIMEX-RAPACK type FlexomatMachine -No: 88/08/30/2271 built in 1988Technical specifications:AXIS 1Longitudinal axis, horizontal X: 1100 mmTravel speed: 250 mm / secAXIS 2Transverse axis, horizontal Y: 510 mmTravel speed: 250 mm / selAXIS 3Vertical axis Z: 475 mmTravel speed: 190 mm / secAXIS 4Rotation axis, travel range: 210 °around the Z axis =: UTravel speed: 5.4 rpmAXIS 5Rotation axis, travel range: 360 °around the Y axis =: VTravel speed: 22 rpmAXIS 6Rotation axis, travel range: 360 °around the X axis =: WTravel speed: 22 rpmClamping force of the basic clamping device: 700 NExpansion shaft for workpiece: 50 mmNumber of milling units: 2Type of belt grinder: MSF 355Sanding belt size: 3500 x 100 mmContact disc size: 250-500 x 100 x 35 mmDrive power: 4.0 kWSpindle speed: 900-4350 rpm.Working height: 1000 mmExternal dimensions d.  ...

Vibrator 4 tubs WALTHER TA.4/72 Internal tub dimensions: L 800 x W 250 x H 300 mm Coating Tubs No 2/3/4: in good condition Coating Tub No 1: used Motor 7,4 kW New electrical panel: starting by electronic variator Concrete base 2 exits at the front Voltage 380 V Dimensions (L x W x H) 2500 x 2100 x 1200 mm Weight approx. 3 T MACHINE IN OUR STOCK IN FRANCE.

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

Workpiece width max mm: 1700 Material thickness max mm: 100 02 Workbenches mm: 5000 x 1700 02 Oscillating aggregates Rollers (cotton) mm: 350 02 Roller motors HP: 18.5 Vacuum Table - HP 12.5

Technical data: Total length mm: 19800 Working width: mm 1000 Working length mm: 6600x1000 Pass-through height mm: 100 Polishing discs: Yes Polishing discs for edges: yes Diameter polishing discs mm: 200 Vacuum table: Yes

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...

Dimensions 1.1m wide 0.9m low 1.75m high A lot of accessories with you

Our range also includes the SMG73 polishing grinding machine, which provides a powerful solution for grinding and polishing various materials such as wood, metal and plastics. The machine has a size of 1.75 m length, 0.75 m width and 0.73 m height and a 5.5 hp engine with a power supply of 380 volts. The spindle speed can be adjusted in three stages of 1400, 1700 and 2200 rpm. Thanks to its robust design and high-quality workmanship, the SMG73 is a durable and reliable investment for anyone who needs a powerful grinding and polishing machine. We offer fast delivery directly to your home so you can start working quickly and easily. Contact us today for more information or to place your order. ---------------------------------------------------------------------- ---------------------- Our range also includes the SMG73 polishing and grinding machine, which provides a powerful solu ...

TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200

TECHNICAL DATA: Mm useful width: 1600 02 Incoming tilting side brushes Cross rotary brush group Horizontal brush group Horizontal brush group Cross brush roller group Weight Kg: 2500 KW installed power: 11 Complete with 1000mm "Italmeccanica" carpet

Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.

Polishing machine steel - Continuous speed - Height: 130cm - Depth: 110cm - Width: 100cm - Weight: 500kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Length: 1000 mm Width: 455 mm Number of speeds: up to: 1400 rpm Appropriated for: deburing Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.25 kW Overall dimensions machine: Length: 1400 mm Width: 800 mm Height: 1650 mm

BUHLER Polishing / pearling machine DSRH 15 1V 5S for seeds, groats LIKE NEW For rice, barley, wheat, spelt... Bargain..

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Diameter: 450 mm Tank volume: 32 l Max. loading capacity: 95 kg Number of speeds: Voltage 50 Hz 3x: 380 Volt Installed power: 1.87 kW Machine´s weight about: 200 kg Overall dimensions machine: Length: 1100 mm Width: 800 mm Height: 1800 mm

Capacity (l): 0 l Type: 0   Other Info: 0 Technical data Execution: barrel-burnishing Behältergrösse: Length: 590 mm Width: 300 mm Tank volume: 42 l Number of speeds: up to: 1500 rpm Installed power: 0.25 kW Machine´s weight about: 251 kg Overall dimensions machine: Length: 730 mm Width: 620 mm Height: 1000 mm

Speed: 0 rpm Motor power: 0 HP/kW Other Info: 0

Speed: 0 rpm Motor power: 0 HP/kW Other Info: 0 Technical data Machine´s weight about: 50 kg Overall dimensions machine: Length: 500 mm Width: 400 mm Height: 400 mm

Speed: 0 rpm Motor power: 0 HP/kW Other Info: 0

Speed: 0 rpm Motor power: 0 HP/kW Other Info: 0

Speed: 0 rpm Motor power: 0 HP/kW Other Info: 0 Technical data Polishing disc: 3 x Speeds: from: 300 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 840 mm Height: 1930 mm Various accessories: Suction plant: ELBARON RON/60 SV

Speed: 0 rpm Motor power: 0 HP/kW Other Info: 0 Technical data Polishing disc: 3 x Speeds: from: 300 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 840 mm Height: 1930 mm

Technical data Execution: barrel-burnishing Number of tanks: 2 Polishing bell Behältergrösse: hexagon up: 400 mm Charging hole:: 2 x Length: 150 mm Width: 150 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 2.2 / 1.6 kW Overall dimensions machine: Length: 900 mm Width: 800 mm Height: 1300 mm

Technical data Circulary table diameter: 400 mm Overall dimensions machine: Length: 700 mm Width: 600 mm Height: 1800 mm

Technical data Execution: Vibrating Internal diameter: 1200 mm Height: 350 mm Volume: 300 l Machine´s weight about: 700 kg Overall dimensions machine: Length: 1900 mm Width: 1600 mm Height: 1250 mm Various accessories: Control box Timer

Technical data Execution: Single polishing machine Speeds: from: 1300 / 2600 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Power: 1 kW Machine´s weight about: 50 kg Overall dimensions machine: Length: 800 mm Width: 400 mm Height: 1200 mm Various accessories: Cast-iron base

Technical data Polishing disc: 4 x Voltage 50 Hz 3x: 380 Volt Power: 5 kW Overall dimensions machine:

polishing grinder make BOSCH type 0601203003Mash. -No: 2260002Power: 230WSpeed: 50000 rpm.Power connection: 220 V / 50 HzCollet chucks: 3.0 mmWith- Pistol shape- wooden box- 18 grinding pinsunusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Combined belt grinding and polishing machine make METABO type 72780 SLFabr. -No: 75 8825Technical specifications:Construction height up to spindle height: 630 mmSpindle speeds: 700 x 2800 rpm.External dimensions approx .: 1677 x 680 x 900 mmwith- 1 belt sanding arm- 2 motorsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

offer 18263 Specifications: - Sanding pad diameter 500 mm - Support table 550 x 300 mm - Tilting support table - Table height 980 mm - Drive 400 V / 4 kW - Right-hand rotation - Space requirement approx. W 800 x H 1350 x D 800 mm - Weight approx. 300 kg

Grinding and polishing machine for the shoemaker's profession, cleaned and tested.

Continuous rotary table HAU R60-1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800 mm, 3 polishing units with 7.5 kW each, polishing shafts 50 mm diameter, max. polishing wheel width 2 x 400 mm + 1 x 280 mm, max. polishing wheel diameter 420 mm, motorized longitudinal and height adjustment – machine equipped with complete. Application system for liquid polishing paste More pictures on request

Rotary indexing table HAU RK 6-1200, with 6 working spindles and 4 polishing units type PES, each 11 kW, 300 mm disc width, with oscillation, motorized height adjustment, liquid paste system (guns + pressure tank), incl. control cabinet Price and further details on request.

Manufacturer: Emme Elle, Type: LBA 1350, Control: Emme Elle, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Fast exchange device: yes,

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Purete, Type: PRT-D2313, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/ Reinigungsbürste/Reinigungsbürste, Year: 2020 neu, Control: HMI, Number of units: 3, Diameter of brushes: 150 , Units mounted upright: yes, Working width mm: 1.320, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 2.000 x 1950, Year :2020 neu

Manufacturer: Purete, Type: PRT-D2306, Year: 2020 neu, Control: HMI, Monting of the machine: Polierbürste/Bürste/Bürste, Year: 2020 neu, Control: HMI, Number of units: 1 + 2, Diameter of brushes: 150, Units mounted upright: yes, Working width mm: 620, Through running hight mm: 2 - 80, Feeding speed continous adjustable: 5 - 25, Required space L x W x H mm: 3.000 x 1.150 x 1.400, Year :2020 neu

Manufacturer: Emme Elle, Type: LBA 1350, Year: 2007, Control: Emme Elle, Year: 2007, Control: Emme Elle, Diameter of brushes: 350 / 200, Units mounted upright: 4 + 4, Working table length mm: 8.000, Working table width mm: 1.350, Polierwalzen : 4, Diameter mm: 350, Disc sanding units: 4, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Bauerrichter, Type: GPM 4, Year: 2013, Control: Programm, Software: Polierwalzen 4, Barcode: 3, Monting of the machine: 350, Year: yes, Number of units: yes, kW output motor: yes, Number of rotations controlled: ca.10.500, Units mounted upright: 1.300, Single table system mm: 2 X 1350 X 3200, Working table length mm: 100, Working table width mm: yes, Polierwalzen : yes, Diameter mm: yes, Disc sanding units: no, Fast exchange device: 8000, Automatical polish supply: yes, Required space L x W x H mm: Schaumstofscheiben 4/Hochdosierpistolen 3 Stück, Year :2013

Working width: 900mm, Height adjustment: 0-80mm, Power: 37kW, 2 aggregates, speed 1-10 m/min. Includes integrated paper filter + product dryer, with vaccuum table and extraction system. Extraction system can be dismantled for transport.

Polishing machine Brand: BAUERRICHTER Type: SL1 1350X3500 table size: 1400x4000mm work area: 1350x3500mm Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Fuse for recirculation: 2.5A, with grinding discs.

Table dimensions: 1400x4000mm, feed rate: 2-16m/min, length: 4500mm, width: 10,500mm, with documentation.