plate bending rolls used for sale

Electric roll Bending Machine 3 rolls Capacity: 800 mm x 3 mm Rolls diameter: Ø 105 mm Motor: 4 CV New electrical panel Front/back rotation Voltage: 220 V Tri (possibility of reversing the motor in 380 V) Equipped with: Emergency stop Equipped with: Protective cover Dimensions (L x W x H): 2000 x 1300 x 1300 mm Weight: approx 1,5 T

General SKU345S761 LocationBarneveld MakeUnex Heatexchanger GmbH (DE) TypeHybrid No.HB 25228400028 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7 m2 Capacity42 Ltr ConnectionsDN80(2x), DN 50(2x) Max. temperature-30/200°C. Information Floorspace1,0x0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

General SKU345S754 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400034 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersHybrid Number of stages:1 Heating surface5.7 Capacity42 Ltr ConnectionsDN50(2x), DN100, DN40, DN80(2x) Max. temperature-30/200°C. Information Floorspace0,9x Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

General SKU345S1121 LocationBarneveld MakeUnex TypeKondensator No.HB25228400032 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Heating surface5.7 m2 Capacity42 Ltr. ConnectionsDN80 (2x), DN50 (2x) Max. temperature-30/200 °C Information Total height0,7 m Weight260 Kg Floorspace0,9x1 m Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S814 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400033 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7m2 Capacity42 Ltr ConnectionsDN100, dn80(2X), DN50, DN40 Max. temperature-30/200°C. Information Floorspace0,9 x 0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...

General SKU345S784 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400035 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface12 m2 Size length1200 mm Sizes width1100 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangersfully welden plate heat exchanger Heating surface12 m² Capacity111 Ltr., 57 Ltr. (shell) ConnectionsProduct: (2x)DN80, DN40: Plates: DN150, DN80 Max. temperature-30/200 °C Information Floorspace1,2 x 1,1 m Total height0,8 m Weight490 kg Extra Specificationssuitable for use as a condenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destinati ...

General SKU345S770 LocationBarneveld MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400030 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7 M2 Capacity42 Ltr Connections(2x) DN50,(2x) DN80 Max. temperature-30/200°C. Information Floorspace0,9x0,7 M Total height1,0 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld  ...

General SKU345S769 MakeUnex Heatechager GmbH TypeHybrid No.HB 25228400038 Year of construction2001 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface22 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface22m2 Capacity166 Ltr ConnectionsDN150. DN80(4X) Max. temperature-30/200 degr.C. Information Floorspace1,5x0,8 M Total height1,2 M Weight560 KGPlate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S756 MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400036 Year of construction2000 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface12 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface12m² Capacity111 Ltr. ConnectionsDN100, DN80(2x), DN40,DN150, DN80 Max. temperature-30/200°C. Information Floorspace1,2x0,8 M Total height1,1 M Weight490 KG Extra SpecificationsCondenserPlate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us  ...

General SKU345S757 MakeUnex Heatexchanger GmbH TypeHybrid No.HB 25228400027 Year of construction2000 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.7 m2 Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Number of stages:1 Heating surface5,7m2 Capacity42 Ltr ConnectionsDN100, DN50(2x), DN40, DN80(2x) Max. temperature-30/200°C. Information Floorspace0,9x0,7M Total height0,7 M Weight260 KG Extra SpecificationsCondenser Plate heat exchangersUnexHeat exchangers > Plate heat exchangersBrand > Unex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

- drie aangedreven rollen - de twee onderste rollen zijn verstelbaar Dia rolls: 117/227 mm Dia of die mandrel: 30 mm Rotationspeed: 20 rpm Motorpower: 2 HP Length : 900 mm Depth: 680 mm Height: 1360 mm Weight: 200 kg

BEMA bending machine - diameter range fi 50 mm to fi 152.4 mm Find more here - / Contact us at -

Manufacturer: Trumpf Type of Machine: Trubend Bending Cell Condition: used A rough list of the components. 1303 - 3 columns/ tool holder 1304 - Rail system with robot arm 1305 - Conveyor belt 1306 - Two operator terminals L1030823 - Enclosure Find more here - / Contact us at -

Verstelbare buigmatrijs voor hoogwaardig staal Beschikbare maten: - V65 gt; V185 mm - V40 gt; V280 mm - V120 gt; V300 mm - V150 gt; V400 mm Aanpassing om de 10 mm De afstelling kan handmatig of halfautomatisch gebeuren. Neem contact met ons op voor meer informatie.

CENTRAX 501KB7S GAS TURBINE / 2014 AS NEW We have this AS NEW GAS TURBINE for sale : TURBINE PACKAGE DETAILS : MAKE : CENTRAX MODEL : 501KB7 S OUTPUT : 5169 KWe VOLTAGE : 11.000 VOLTS FREQUENCY : 50 Hz FUEL : NATURAL GAS YEAR of MFG : 2014 TURBINE DETAILS : MAKE : ROLLS ROYCE POWER SYSTEMS MODEL : ROLLS ROYCE ALLISON 501-KB7S SINGLE SHAFT OUTPUT TURBINE : 6100 KWm OUTPUT MECHANICAL : 5300 KW EQUIVALENT OPERATING HOURS : 5.200 SINCE NEW EFFICIENCY : 32,6 % HEAT RATE : 11.052 KJ/MWh EXHAUST GAS TEMP : 511 °C ALTERNATOR DETAILS : MAKE : LEROY-SOMER MODEL : LSA56 BUL85-4P VOLTAGE : 11.000 VOLTS OUTPUT : 6750 KVA or 5400 KW YEAR of MFG : 2014 SCOPE : SILENCED CANOPY AIR INTAKE & FILTRATION SYSTEM GAS LINE & SAFETY VALVES CONTROL PANEL ON BOARD of PACKAGE FIRE FIGHTING SYSTEM TRANSFORMER 11.000 V � ...

4-rolls Kramatorsk plate bending machine Ultimate tensile strength of material: 500 MPa (50 kg/mm²) Yield strength – cold bending: 250 MPa (25 kg/mm²) Yield strength – hot bending (primary): 100 MPa (10 kg/mm²) Yield strength – hot forming (secondary heating): 45 MPa (4.5 kg/mm²) Elongation at cold state: ±18% Maximum sheet width: 4000 mm Max sheet thickness – cold, without pre-bend: 71 mm Max sheet thickness – cold, with pre-bending: 63 mm Max sheet thickness – hot forming: 150 mm Minimum bending radius – cold: 560 mm Minimum bending radius – hot: 600 mm Maximum radius for closed bending (curled edge): 1000 mm Main motor: 160 kW Weight: 730 tons

Cylinder head, Bergen BRM Lower OD 430 mm, upper OD 420 mm Draw. no. 528/15-1 Reconditioned Part no: 403690 Part no: 528/15-1

Built in 2009/2005 Size min. 100 x 120 mm Max 300 x 430 mm Thickness Film thickness 20-100 mµ Mechanical speed 25,000 CPH Equipment 10 stations rollstream ROS 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station 4 MTD AWS OWK built in 2005 JET feeder 8 JEF-450-FVM SA190 built in 2005 foil wrapping machine CMC 2800 with two feeders built in 2009 twin stacker CMC

Rolls-Royce Olympus SPEED SIGNAL GENERATOR from the stock of the Army Navy Unused or overhauled

Rolls-Royce Olympus SPEED SIGNAL GENERATOR from the stock of the Army Navy Unused or overhauled

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ conveyor conveyor conveyor -powered Condition: Used Total length: approx. 10400 mm Plant consists of 4 segments Segment length: approx. 2600 mm Drive type: Chain drive Total width incl. motor: approx. 1350 mm Total width without motor: approx. 1130 mm Conveying width between rollers: approx. 900 mm Roll width: approx. 1010 mm Wheels/axle distance: approx. 165 mm Roll diameter: approx. 70 mm Web height: 100/ 50 mm Material: Steel Color: orange Stock: 10.4 meters Price per meter Conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for yo ...

9 injection moulding tools for the production of rollers - along with a wide range of accessories As a result of a restructuring of our customer, we offer for sale 9 injection molds for the production of various types of castors for furniture and chair castors, including customer addresses. The pictures represent the basic nature of the different roles. These injection molds could be used to set up a complete production facility for the production of rolls. The basic body of the castors can then be supplemented with various inserts (depending on the customer's requirements) for final attachment to the end product, e.g. a chair. This offer also includes the following accessories - which are part of the production process: • 1 x punching tool (for the roller roller) • 1 x press (for pressing the pins and shafts) • 1 x automatic assembly machine for spring washers � ...

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

82 MW Rolls Royce Trent 60 - NATURAL GAS TURBINE COMBINED CYCLE POWER PLANT -Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; Manufactured in 2016, delivered in August 2017 65.9 MW(e) ISO 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas Cold start to full power in under 10minutes 50Hz, but easily convertible to 60Hz Engine still preserved in original shipping container An aero derivative gas turbine -Siemens Steam Turbine Generator SST-300 C2S/C160; Manufactured in 2016 Output 15.75MW ISO Speed 7059 RPM Admission Steam Temperature 400 Degrees C Admission Steam Pressure 30 bara Exhaust Pressure 0.07 bara Rotation- Right

82MW ISO rated combined cycle power plant. The plant’s main equipment is composed of a Rolls Royce Trent 60 DLE Gas Turbine (also known as the SGT-A65), a Nooter/Eriksen HRSG, and a Siemens SST-300 Steam Turbine. These are below; 1. Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; · Manufactured in 2016, delivered in August 2017. Never used. · 65.9 MW(e) ISO · 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate · DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas · Cold start to full power in under 10minutes · 50Hz, but easily convertible to 60Hz · Engine still preserved in original shipping container · An aero derivative gas turbine 2. HRSG is licensed by Nooter Eriksen USA; 3. Siemens Steam Turbine Generator SST-300 C2S/C160; · Manufactured in 2016 · Output 15.75MW ISO · Speed 7059 RPM · Admi ...

Rolls Royce Bergen B32:40 L6P engines for sale in our stock in Istanbul Turkey Bergen B32:40 L6P complete engine with turbo charger In our stock in Istanbul 3 pieces available year: 2002 3000 kw 750 RPM in good condition please contact : info@fin-marine.com

Bergen L 32:40 P cylinder head covers complete. 6 pieces available also available all other major parts like: connecting rods, pistons, crank shaft, turbo charger, camshaft piece , fuel pumps etc. In our stock in Istanbul Turkey Please contact us at: info@fin-marine

TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE CYLINDER LINERS OF BERGEN B 32:40 A AT OUR STOCK PART NO IS 102001 WE VE 2 PCS AT OUR STOCK. EX STOCK IZMIR TURKEY ADDITIONALLY WE VE MANY MANY OTHER MAJOR PARTS OF THIS TYPE ENGINE BERGEN B 32:40 A AT OUR STOCK PLS REFER LIST ON ATACHE IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ;

The power plant, based on a 5 MW gas turbine CENTRAX 501 KB7 is complete with all needed equipment, allowing a steam output of 20 tons per hour at 20 bar. From ZERO hours until the last working day all maintenance was performed by Centrax under full maintenance contract.

Refer to code 1056 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

3 to 5-Roll calender Buzuluk Number of rolls: 4 pcs. Roll diameter: 150 mm Roll length: 400 mm

Key data: 3155 , 10500

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000 Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.

INDUSTRIAL GAS TURBINE Brand: Rolls-Royce Model: 501-KB5s-DLE Maximum pressure: 1,205 PSI Condition: Pre-owned / Overhauled : Industrial Equipment Operational Period: 1999 - 2011 Total Running Hours: 39,500 hours Documentation: I am reviewing the documents and will send you the key details shortly

Model: Avon 1533-56L Year of Manufacture: 1992 Type: Aeroderivative Gas Turbine Rated power: Approximately 16,347 kW (22,225.73 hp) to 17,007 kW (23,123.08 hp) DIRECTINDUSTRY Thermal Efficiency: Up to 44% Dimensions: Length: Approx. 3,200 mm Diameter: approx. 907 mm Weight: Approximately 1,310 kg

hello for sale 2 units turbine in trailer Technical Specifications Model: Rolls-Royce Allison 570KA Year of manufacture: 2005 Fully overhauled: 2012 Commissioned: 2016 Operating hours since 2016: Only 81 hours Fuel type: Gas Power output: 4,400 kW Mounted on trailer: Yes Additional trailer: UPS trailer included Location: Paris, France loaded now Availability: Immediate Documentation: Complete (technical & maintenance records)

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible.

Key data: 2000 mm, 23 mm, 18 mm

4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Duck plate stacker G+J Platestacker 85; good condition, cleaned and tested; Working width 850mm; with plate trolley. Platestacker G+J Platestacker 85; good condition; cleaned and checked; working width 850mm; with plate trolley.

Key data: 4000 mm, 2000 mm, 575 mm

Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

General SKU345S1128 LocationBarneveld MakeBarriquand Type IJS 1x24/1x25x350x2250 37,8 m² No.24059E1 Year of construction1994 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Surface37.8 m2 Size length1970 mm Sizes width261 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerswelded Heating surface37,8 m² CapacityCircuit A: 54,5 Ltr., Circuit B: 60,3 Ltr. ConnectionsDN50, DN100 (2x), DN200 (2x) Max. temperature-30/200 °C Information Total height1 m Weight1030 kg Floorspace3x1,05 mPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

General SKU245P322 LocationBarneveld MakeSeitz-Werke GmbH (DE) TypeRZ 60A KC Year of construction1975 Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface1.75 m2 Cake3.5 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Filter surface1,75 m2 Number of platens11 Platen sizesdia.600mm Max. temperature165 degr.C. Cake capacity3,5 Ltr Capacity270 Ltr MaterialStainless steel 1.4571 (316Ti) Information Mach.No.1701 Mounted on legscheck Floorspace1,0x1,0 M Total height1,8 MHorizontal plate filtersSeitz - WerkeFilters > Horizontal plate filtersBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...

General SKU212T495 LocationBarneveld MakeBarriquand TypeIXASP 7+6/12X1x1000x220 No.26070 E Year of construction2001 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface4.3 m2 Specified Features - Plate heat exchanger MaterialStainless steel Plate heat exchangerscheck Number of stages:1 Heating surface4,3 m² Capacity35 Ltr. Max. temperature-10/200 °C Information Total height1,1 m Weight500 kg Floorspace1,25x0,5 mPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU345S1092 LocationBarneveld MakeBarriquand TypeDIJS 1x6/1x7x290x2250 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface7.8 m2 Size length2020 mm Sizes width290 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerswelded Heating surface7,8 m² CapacityRoom A: 29 Ltr., Room B: 234 Ltr. ConnectionsDN50, DN80 (2x), DN200 (2x) Max. temperature-30/200 °C Information Floorspace3x1,5 m Total height0,7 mPlate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines ...

General SKU321U762 LocationBarneveld MakeGea TypeVT 40 DS CDL-C-16 No.171/23406 Year of construction07.2020 Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface77 m2 Size length1300 mm Sizes width525 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4306 (304L) Plate heat exchangerscheck Heating surface77 m² Capacity116.31 Ltr. (zone A and B) Number of platens124 Plate sizes615x1016 mm ConnectionsDN100 (4x) Max. temperature100 °C Information Total height1,60 m Weight1135 kg Floorspace0,53 x 1,30 mPlate heat exchangersGEA EcoflexHeat exchangers > Plate heat exchangersBrand > GEA Ecoflex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Ple ...

General SKU212T501 LocationBarneveld MakeBarriquand TypeIXAP 5+4/8x1 x 1000 x 160 No.213712 B Year of construction2001 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface1.9 m2 Size length1000 mm Sizes width160 mm Specified Features - Plate heat exchanger MaterialStainless steel 1.4571 (316Ti) Plate heat exchangerscheck Heating surface1,9 m² CapacityCircuit A (water): 5 Ltr, Circuit B (product): 20 Ltr. Number of platens9 ConnectionsDN25 (4x) Max. temperature-10/200 °C Information Mounted on legscheck Weight350 Kg Floorspace1,25x0,4 m Total height1 m Extra SpecificationsThe Barriquand IXAP 5+4/8x1 x 1000 x 160 is a versatile plate heat exchanger designed to facilitate efficient heat transfer across various applications. It operates through two distinct circuits, A and B, each catering to specific needs. Circuit ...

General SKU345S1099 LocationBarneveld MakeBarriquand TypeIXS 2x4+5/3x4x1250x160 No.E 24089-100E Year of construction1994 Main Features MaterialStainless steel Shell (Material)Stainless steel Surface3.6 m2 Size length1240 mm Sizes width160 mm Specified Features - Plate heat exchanger Plate heat exchangerswelded Heating surface3,6 m² CapacityCircuit A: 9 Ltr., Circuit B: 24 Ltr. ConnectionsDN40 (2x), DN80 (2x) Max. temperature-30/200 °C MaterialStainless steel 1.4571 (316Ti) Information Total height0,55 m Weight280 kg Floorspace0,58x1,4 m Extra SpecificationsCondenser Plate heat exchangersBarriquandHeat exchangers > Plate heat exchangersBrand > Barriquand What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, ...