We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,312 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Description: Lot consisting of: N°10 IKEA plastic containers SAMLA model, size: 400 x 280 x 250 mm each. Also composed of other No. 5 containers of similar size ,with colored lids. Including also other No. 6 IKEA SAMLA model containers, size 200 x 280 x 130 mm each. Approx. Onsite Dimension. (l x w x h): 400 x 600 x 1,200 mm, weight approx.: 30 kg
used
Technical data on the Lindemann shredding plant with light material separator, vibrating screen and conveyor technology: Manufacturer Lindemann GmbH Type 820-20 (hammer mill) Year of construction 2010 Drive power 110 kW Rotor 820 mm Throughput capacity approx. 2 tonnes/hour, depending on material Scope of delivery: 1 piece feed hopper with screw conveyor, colour grey 1 piece hammer mill, Lindemann, type 820-20, colour beige/yellow 1 piece discharge belt, roller belt conveyor, colour blue/grey 1 piece magnetic roller conveyor, colour blue 1 piece light material separator, colour white 1 piece vibrating sieve, colour white 1 blower, colour white 1 piece Cyclone with big bag filling rack, colour white/grey Comments: Unfortunately, no further technical data or information on the plant is available. However, the shredding plant is currently still set up, connected to electricity and could be ...
used
Key data: 4800 kN
Length x width x height of the machine: 8.6 x 2.0 x 2.1 m Machine weight 23000 kg Accessories: Yudo-Star Sigma 1500 Industrial Robot
used
Key data: 7000 kN
Length x width x height of the machine: 8.3 x 2.5 x 2.5 m Machine weight 32000 kg Accessories: Yudo-Star Sigma 1500 Industrial Robot
used
Key data: 500 kN, 25 g/PS, 18 mm
Cleaned, tested, repaired machine, ready for production. 50 tons clamping force, 320x320 column spacing. 18 screws, 25 cm3 injection volume. 1 core puller, 1 air circuit. The display language is German or English. The handbook is in German. The machine is in very good condition, it can be viewed during operation. A video of his operation was also made. Check out our other ads.
used
Key data: 250 kN, 22 mm
Article number: 27-06-304 Manufacturer: Arburg Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1985 L x W x H: approx. 2700x1200x1800mm Weight: approx. 930kg Closing side: Clamping force: approx. 250kN Holm dimension hxv: ca.221x0mm Plate size hxv: approx. 342x250mm Installation height min: ca.150mm Installation height max: approx. 300mm Plate spacing max: approx. 500mm Aperture travel: approx. 200mm Spray side: Screw diameter: approx. 22mm Displacement: approx. 38cc Injection pressure: approx. 1500bar Other accessories on request Price and other technical data on request
used
Key data: 550 kN
Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All of ...
used
Key data: 1500 kN
Ferromatik Milacron Magna T(MTs) 150-450 / production line with the Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt and contactor housing / machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 45 mm Spray weight: 215 g Injection pressure: 1984 bar Dosing volume: 226 ccm Clamping unit : Clamping force: 150 t Tie bar spacing: 510x510 mm Size of clamping plates: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Controls: B&R - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot Interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for additional payment) Injection unit is wear-resistant and resistant to corrosion Main motor of the machine - servo motor driven by inverter Central lubrica ...
used
Key data: 4200 kN
Demag Ergotech Concept 420/810-2300 with the Sepro Success 33 robot Year of construction: 2006 Injection unit: Screw diameter: 60 mm Spray weight: 800 g Injection pressure: 2420 bar Dosing volume: 891 ccm Clamping unit: Clamping force: 420 t Tie bar spacing: 800x710 mm Size of clamping plates: 1200x1100 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC 4 Additional equipment: Machine in very good technical condition Euromap 67 Robot Interface Air Valve x 4 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the movable plate x 2 Hydraulic, needle core pull, controlled by a proportional valve - from the side of the fixed plate x 2 Hot runner control x 18 Injection unit hardened - Bimetal Central lubrication Parallel Movements Built-in print quality control system from Sensor Kistler - tool pressure measurement ...
used
Key data: 5000 kN
Arburg 375V 500-100 / Vertical injection moulding machine with rotary table Year of construction: 05.2012 Injection unit: Screw diameter: 20 mm Spray weight: 29 g Injection pressure: 2500 bar Dosing volume: 31 ccm Clamping unit: Clamping force: 50 t Tie bar spacing: 0x0 mm Size of clamping plates: 504x424 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Tie-bar-less machine Operating hours: 30,000 h in automatic mode Hydraulic core pull x 1 Hot runner control x 6 Injection unit hardened - Bimetal Turntable diameter: 900 mm Self-closing nozzle Built-in quality control system Infrared Protective Curtains Metrics: Weight: 3380 kg Length/Width/Height: 2.52x1.47x3.25 m Drive: Pumps/motor: 18 kW Heating capacity: 4.9 kW Total power: 22.9 kW All offered machines are st ...
used
P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...
used
used
Key data: 35 kN
SUMITOMO SD35E 35Ton Injection Molding Machine The high-speed injection molding machine for all challenges Manufacturer: Sumitomo Model No.: SD35E 35t Plastic Injection Molding Machine Clamping force: 35 t Power: AC 200V, 30V, 125A Inverter: 21A Heating power: 4.8 KW Weight of the injection compound: With the built-in extrusion screw approx. 100g Included: DRD III Yushkin high-performance robot Year of manufacture: 04/2000 Condition: At the time of shutdown, the machine was in perfect condition while CD production was running There are 2 identical machines available, the price is per machine The machine is currently still tied up in our customer's factory in Bielefeld and will be handed over to our customer due to a restructuring of the production processes. We sell the assets on behalf of our customers. The offer prices are to be understood as net prices in EURO ex ...
used
Transport belt with s/s frame and plastic belt, belt width: 390 mm, total dimensions: 3000 mm x 930 mm x 1250 mm.
used
Transport belt with s/s frame and plastic belt, belt width: 550 mm, total dimensions: 3250 mm x 900 mm x 1400 mm.
used
90° curve conveyor, plastic belt, belt width: 260 mm, total dimensions: 3900 mm x 1300 mm x 950 mm.
used
Transport belt with s/s frame and plastic belt, belt width: 500 mm, total dimensions: 2500 mm x 970 mm x 800 mm.
used
Mobile press for cheese and tofu, 20 plastic forms, form dimensions: (2x) Ø 200 mm x 70 mm, total dimensions: 2440 mm x 400 mm x 1490 mm.
used
Transport belt with s/s frame and plastic belt, belt width: 180 mm, total dimensions: 1950 mm x 800 mm x 870 mm.
used
Mobile elevating belt, plastic belt, belt width: 370 mm, elevating height: 900 mm, total dimensions: 8300 mm x 800 mm x 1000 mm.
used
Key data: 1600 kN, 359 g/PS, 50 mm
Machine in good condition, dry, clean, ready for production. The pump is quiet and the injection molding is precise. Everything works perfectly. With 2 core pullers and robot connector, with quality control program. Please see my other ads.
used
Elevating belt, s/s frame, plastic mesh belt, belt width: 305 mm, elevating height: 1070 mm, total dimensions: 10200 mm x 400 mm x 1080 mm.
used
Deca Technic mobile pressure roller, plastic roller, roller width: 380 mm, plastic mesh belt, belt width: 340 mm, total dimensions: 1020 mm x 800 mm x 1720 mm.
used
S/s mobile S-shaped conveyor, plastic mesh belt, belt width: 400 mm, total dimensions: 6200 mm x 1600 mm x 1100 mm.
used
7 aluminium racks, 4 plastic floors, dimensions: (1x) 745 mm x 575 mm x 1760 mm, (3x) 970 mm x 575 mm x 1760 mm, (3x) 1250 mm x 575 mm x 1760 mm. Including spare parts.
used
Loma mobile metal detector, 415 V, plastic belt, belt width: 300 mm, clearance: 350 mm x 180 mm, total dimensions: 2150 mm x 800 mm x 1100 mm.
used
Elevating belt, s/s frame, plastic mesh belt with dividers, belt width: 370 mm, divider height: 50 mm, distance between dividers: 250 mm, elevating height: 2000 mm, total dimensions: 3300 mm x 550 mm x 2150 mm.
used
Transport belt, s/s frame, plastic belt, belt width: 740 mm, total dimensions: 3900 mm x 1010 mm x 1330 mm.
used
Single batch of plastic film of various types (jumbo/automatic/manual) on pallets.
used
Single batch of plastic raw materials: -16 big bags "Regenerated" - deposited in Rodengo Saiano (BS) -16 big bag "LDPE" - deposited in Rodengo Saiano (BS) -1 big bag "Elite 5230" - deposited in Chiari (BS) -1 big bag "Braskem R7051" - deposited in Chiari (BS) - Pallets of Master Vario warehouse - Macrolene Pink and Green - deposited in Chiari (BS).
used
Description: Clamping force: 1,000 kN Screw diameter H: 20 mm Screw diameter V: 18 mm incl. turntable, deposit conveyor, Wittmann handling robot Internal number: A 100/2 2K M2358 SN: 227275 Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 6,700 kg
used
Description: Internal number: A 100/1 2K M2357 SN: 226901 Clamping force: 1.000 kN Screw diameter H: 20 m  ,Screw diameter V: 15 mm incl. turntable, deposit conveyor, Wittmann handling robot Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 6,700 kg
used
Description: Clamping force: 1,100 kN screw diameter 35 mm incl. discharge conveyor, Engel ERC 23/2-F handling robot Internal number: E 110/1 M2332 SN: 163486, Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 7,400 kg
used
Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...
used
Article: diaphragm valve pneumatic valve Manufacturer: Georg Fischer GF Type: Diastar PVC-U / EPDM Condition: used, well Model: d63 DN50, PN 6, IP 65 P Max: 6 bar Quantity: There are 10 units available.
used
CONVEYOR BELT / CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! For many applications in industry, agriculture and for woodchips. On request we manufacture the conveyors / conveyor belts to your individual measurements. (All lengths, widths and designs possible) Available also with pimples, studs or textured surfaces. We ship worldwide we deliver worldwide, please ask for shipping costs!
new
POTATO BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry.
new
FEED BELT, CONVEYOR BELT, CONVEYOR BELT DIRECTLY FROM THE MANUFACTURER! BELTech GmbH in Lüdenscheid manufactures all dimensions and qualities according to your specifications. Premium quality for agriculture and industry. -New, on one side coated, open, 2-ply reinforced, with mounted metal connectors to the endless connect type Aligator RS-62, -Dimensions: length 6500 mm x 400 mm width x thickness 2.4 mm, surface with tunnels and double-sided wedge bar -Tunnel 20 mm high x 330 mm long, distance approx. 500 mm, with 2 wedge bar on the top of the face, edges flush, 6 x 4 mm, green
used
1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).
used
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 8 mm -PVC coated -Length: approx. 50 m -Also other crane ropes available -Weight: 6 kg
used
Used Pvc curly mat machine in very decent condition. There is no problem with the whole system. Everthing works smoothly
used
1 of used pneumatic, column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posivel PVC-26, new 2011 (excellent condition). Column 2.350 mm tall. Designed for a maximum lifting load of 36 KG. Maximum radius 2.600 mm. Vertical stroke 1.400 mm. Fitted with 71 mm diameter expander-type gripper for tubes with 90-degree (vertical/horizontal) swivel motion. 2 units available. Visible rack is for transport purposes only and not included (available at additional cost).
used
Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172
used
olienherstellung =: PVC shrink and PET Line speed: 80 meters/min Final net film width: 4.2 meters Line speed: 80 meters/min Production capacity: 21 tons/day The machine includes: -Automatic turnstile unwinder 2 meters -Automatic turnstile -Winder 4.50 meters -Cooling system -automatic thickness control -automatic control of infrared heating -Automatic inline edge strip handling system -TCU -Controller fan -Cooling tower -Exhaust pipes -Exhaust hood -16 steel core width 4.8 meters -Complete spare parts (package purchased for 280.000 €) Dimensions approx. length 50 m x width 19.0 m x height 5.9 m
used
CAPSULING MACHINE AMS FERRARI FOR PVC Year : 2015 Single thermal heads with double ventilations Distribution capsules by plateau Speed: 2500 bph Equiped with nr.1 round bottle (diam. 98-100mm)
used
Capsuling machine ROBINO&GALANDRINO for PVC Year: 1994. Speed: 3.500 BPH. Direction: clockwise. Single thermal head for PVC capsules. Safety protections.
used
Description GILDRESS
used
Capsuling machine ROBINO&GALANDRINO Z 16 T | PVC • Year: 2002 • Speed: 20.000 bph • Direction: Clockwise • 16 heads for pvc capsules • Long autonomy capsule distribution. • Safety protections
used
Description Heating platen Ce certificate
used
permissible ambient temperature: 8-35°C, connected load: 8kW, control: ROuni1, includes dosing systems DOSIN AS-K, Chemical DOSIN UO-DB75, Chemical DOSIN UO-DB100, dosing tanks, safety drip pans, water meter, injection points and hot water injection points, can be inspected on site.