plastic pvc used for sale

Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 150 mm -Length: 595 mm Height: 74 mm -Drawing with the pictures -Number: 4x savers available -Price: per piece -Weight: 5.6 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, center bearing design -Middle bearing: for Ø 50 mm shaft -made of: plastic -Number: 34x stock available -Price: per piece -Dimensions: 90/70/H85 mm -Weight: 0.6 kg/piece

Eddy current separator from Bakker Magnetics 104 E The latest eccentric eddy current "104" X Ecentric Magnetics has been specially developed and designed for the separation of fine particles from, for example, bottom ash, electronic scrap or small metal fractions. The high-speed magnetic rotor in this machine has the highest number of poles on the market, namely 104 (!) and operates at a speed of 3,600 rpm. The 104 rotor produces an astonishing field frequency of 1.56 kHz Production width 2 meters wide

Plastic sheet RÖCHLING 2000 x 1000 mm ISO 11833-1 PVC-U - E - T2- 1 length. 2000 mm width. 1000 mm Material thickness: 5 mm Material: Trovidur® EC N Colour: T-250 red Weight: approx. 14 kg New ! Dimensions: 2000 x 1000 x 5 mm

Lot of 15 medium pallets Auer MPHD1208 H1 with locking edge High-quality plastic HD-PE-R, black Euro plate format Euro pallet H1 With tubular steel reinforcement Dimensions approx. 1200 x 800 x 160mm (LxWxH). Weight approx. 18kg. Total height for transport 240cm The pallets come from a warehouse liquidation and are unused, or very little used, see photos. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Lot of 15 medium pallets Auer MPHD1208 H1 with locking edge High-quality plastic HD-PE-R, black Euro plate format Euro pallet H1 With tubular steel reinforcement Dimensions approx. 1200 x 800 x 160mm (LxWxH). Weight approx. 18kg. Total height for transport 240cm The pallets come from a warehouse liquidation and are unused, or very little used, see photos. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Lot of 11 pieces of plastic pallets Transoplast Euro H1 High-quality plastic red Euro plate format Euro pallet H1 Dimensions approx. 1200 x 800 x 160mm (LxWxH). Weight approx. 18kg. Total height for transport 180cm The pallets come from a warehouse liquidation and are unused, or very little used, see photos. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Hurmak Zenith 200 Plastic injection moulding machine The machine screw sleeve is in the new condition, it was newly built. Machine dryer and loader are included in the price. Machine injection unit is servo. VISE FORCE: 2000 KN TOTAL POWER: 37KW ENGINE POWER: 30 KW RESISTANCE POWER: 7 JANUARY DIAMETER: 45 TOTAL WEIGHT: 5.2 TON

Manufacturer Haitian Model HTF 650X Year 2005 Capacity 650 Ton Machine is in very good condition

650 Ton L/D: 19 Screw diameter : 90 mm Screw volume(cm3) : 3140 Stroke : 1350 mm Distance between columns : 950 mm x 950 mm DayLight : 1800 mm Plate size : 1400 mm x 1400 mm All maintenance has been done regularly Only original raw material used on the machine Fully hydraulic

Plastic hose manufacturer extruder For processing LDPE, HDPE and regranulate, so far only clean original material was used within. Production size (tube width): 35 mm - 250 mm (without core change) Performance: depending on material thickness Pulley thickness: 25 mm Regularly maintained machine

TECNOSALD 1600 welder Year of manufacture: 2007 Weight: about 5500 kg Working width 1600 mm Installed power 30 kW New control - HMI panel, PLC controller and Mitsubishi inverters Perforating knife Photocell Antistatic device Double decoiler 3m long table with automatic bag removal Film parameters: Thickness: Min: 0.018 Max 0.100mm x 4 Length up to 3000 mm Number of ticks per minute: Foil up to 0.030 up to a length of 700 mm 50-60 Film above 0.030 mm 15-18

400 liter STIRRER, used, overhauled, in stainless steel, tank with conical bottom and bridge for motorisation, from following characteristics:stirrer with shaft and impeller notched dia. 200mm. bottom – engine Kw. 4 rounds 1500; exhaust cone cut with jacket and welding of TC 2 1⁄2” fitting half-cover remaking and dust seal gasket. New electrical panel equipped with a 5.5kw inverter so that the engine speed can be varied.

Compressor Dalgakiran Tidy 25 Production - Turkey. Is in working order. Max pressure 7.5/10/13 bar Minimum pressure 4.0 bar Productivity 3.30/2.80/2.40 m3/min Screw compressor type Compressed air outlet 1 inch MOTOR Type Electric, three-phase Power 18.5 kW Drive type Belt NOISE CHARACTERISTICS: Noise level 69 dB

Two stage mixer Valtorta, type V100+RO3000 HE-V Excellent condition on frame with full remote control. There is a complete description and instruction manual. In great condition. The mixer is designed for mixing compositions for producing TPE, PVC compounds, polyethylene and polypropylene mixtures. 1000l mixer volume/3000l cooler volume.

Equipment for the dosage of plastic material at the loading hoppers of the extruders and the relative vacuum transport system. The equipment is branded Syncro, mod. EasyBatch M3 (Doser) and Sylink 055 BM (Vacuum conveyor). The devices are in excellent condition, purchased in 2019 and used for about two months and then removed from our system to be replaced by increased equipment and kept in our warehouse.

Line for the production of gloves The device efficiently produces disposable foil gloves. The stand is sold in a set with a device designed for perforating a set of disposable gloves. It is also possible to buy a single machine. We offer price negotiation. The device producing gloves is intended for production with the following parameters: - number of strokes: 100-250 pcs / min. x 2 sealing stamps - glove width: 240-300 mm - glove length: 200-400 mm The device consists of 2 modules: - A tear-off machine - Welding machine Technical data: - width: 1500 mm - length: 6500 mm - height: 1750 mm - weight: 1500 kg - supply voltage: ~ 380V 50 Hz - heating power: 10 kW - drive motor power: 2.2 kW On the other hand, the station for punching disposable foil gloves has the following technical data: - width: 900 mm - length: 800 mm - height: 1800 mm - weight: 200 kg - su ...

Bag Making Machine Model: Smartmac 850 / S8-servo bag making machine (bag forming with a side seam, a hole-cut unreinforced and reinforced with glue reinforcement handles) Release Year: 2004 Country of manufacture: Turkey Condition: good working, machine in operation, any checks We will assist in the training of personnel and the implementation of the NDP.

Thermal transfer machine for transferring a thermal transfer film to PVC, LEATHER, GLASS, MDF and everything that lies on the film. The machine was bought new in 2014, Mercedes is among its peers, the working area is 1020 mm, the height, width, clamping forces are adjusted, the equipment is fully operational, everything is working properly, we are still working on it, we will show, teach, load, send 2014 Korea production, mold size 3000mm 1000mm he was taken new If you buy the whole kit, then we’ll put another 5 molds for making 3D molds plus a thermo transfer film, for all this.

Pre-stretch is the process that allows stretch film to be stretched before being applied to a load. It is only 5 µm - 8 µm thick, it is very strong and tear resistant. In case of the pre-stretch, less film is required to wrap a pallet than in case of any standard products. As much lower quantities of the product are used to wrap the load, this provides for substantial financial savings. The main advantage of the machine is pre-stretch effect while winding. According to technical tasks film tension may reach 400%. The machine enables stable work and average output of 50 tons pre-stretch film per month. It is the best choice for getting hand and machine pre-stretch film rolls. Thickness of the film 5…30 mm Mechanical speed 1200 m/min Rewinding inaccuracy regardless of the rewinding length 1.0 m Maximum pre-stretch 400% (1m=5m) Finished roll diameter, at most 250 mm  ...

Vibration welding machine data: • Manufacturer: BRANSON ULTRASONIDOS • Date of acquisition: 11/06/2000 • Year of production start: 2001 • End of production year: 2015 • Hours of work: 24,600 hours • Model: VIB 2615 • Manuals: we have all the originals • Working frequency: 234.4 Hz • Noise: 60 dB • Welding time: 2s • Free time: 18s • Electrical connection: 3x400V, N, PE, 50Hz • Power consumption: 17KVA • Maximum current: 24 A • Preliminary fuse: 32 A • Control voltage: 24 V DC • Weight: 3500kg • Dimensions: 1915x1396x2185mm • The machine is suitable for welding all common thermoplastics and was used to weld automotive parts • Reducer: Compabloc Cb 2000

Refrigerator Eurochiller, model GCA045 Production - Italy. Issue 2008. Working. the plate heat exchanger was replaced with a shell-and-tube heat exchanger, a vibration damper was installed. Volt 400 HZ 50 kw 18.5 A 34 Vaux 24 VI 500 IP 54 Gas R407c Air Condenser 25C Water Process 15C PS Alta/bassa, Hogh/Low Gas 27/22 bar TS Lato alta, High Side -10C/+95C TS lato Bassa, low Side -10C/+55C

Haitian MA8000 injection molding machine, model 26800 Production - China, release of 2015. Is in working order. Pumping speed (g/s) : 642 g/s Starting stroke : 1040mm Screw diameter (mm) : 100mm Open stroke (mm) : 1040 mm Closing force (kN) : 8000 kN Ejector stroke (mm) :280mm Distance between columns (height) (mm) :1000mm Ejector force (kN) : 186 kN Distance between columns :10001000mm Power (kW) : 140.75 kW Theoretical shot volume (cm³) :3691 cm³

Poly draw garbage bag on roll converting system TA 1200 Year 2010 Two machines 1. TAI-1300C - LIFTING UNWINDER Product Width: 100-1250mm Diameter of roll max 1000mm Edge Position Control System (E.P.C) Auto Tension Control System 2. TA-1300DTC-2 - DRAW-TAPE FEEDING SYSTEM Tape Thickness: 0.015-0.02mm (HDPE) Draw-Tape Width: 80-100mm Max. O. D. of Draw-Tape: 650mm 3. TA-S-1250 - SHUTTLE TRACK SEALING & PERFORATING UNIT Max. Bag Length: 1200mm (Max. Sealing Width) Bag Width: 140-2000mm Film Thickness: 0.01-0.08mm (LLDPE, Single Layer) 0.008-0.025mm (HDPE, Single Layer) Speed 100 m/min 4. TAF-1700 - TRIANGLE FOLDING UNIT 5. TAD-450 - FOUR SHAFT SPINDLING WINDER Coreless Production Width: 100-380 mm One of the Machines is upgraded to new model Servo driven punching device and hot air sealing system for draw tape sealing unit.

For sale 3 pieces of used BECKER vacuum pumps model VTLF 2.250, they are vane, oil-free, rotary pumps, which affects their durability. The VTLF series are highly durable pumps with low operating and maintenance costs. These pumps feature long life graphite vanes and integrated air filters. Two vacuum pumps from 2018, no.: A3252574, A3252569, are used very little (perfect condition) and the third pump from 2014, no.: 2794370, has had its graphite blades replaced, so its operation does not raise any objections and does not show any vacuum losses. Detailed data in accordance with the photographs of the nameplates.

Automatic machine for the production of bags with the use of a sealing matrix, used by us for the production of ice cube bags. The machine is equipped with a welding and cutting knife, foil feed length adjustment, foil forming device (self-closing pouches), a conveyor belt collecting pouches and a movable table with a pouches counter. The machines have additional equipment in the form of a die for the so-called eurozawieszki and additionally 5 different matrices (with different patterns of bags). The machine is powered by a three-phase voltage of 380V. A pneumatic system is also used for its work. It was produced in 2014, and has not been used since 2020 (beginning of the pandemic).

Plastic round rod, round material, 3 pcs PAGUS 2x PE1000, diameter: Ø 30 mm, length: 1010 mm color: natural 2x PA6G, diameter: Ø 50 mm, length: 980 mm color: blue New ! Dimensions ( Packaging ): 310 x 310 x 250 mm

Key data: 900 kN, 140 g/PS, 35 mm

Year of construction: 2006 Clamping force: 90 tons. Screw diameter: 35 mm Pump hours: 46393 h

Key data: 850 kN, 89 g/PS, 30 mm

Built in 1991 Clamping force: 85 tons. Screw diameter: 30 mm

Key data: 6500 kN, 1650 g/PS, 90 mm

1.0 pcs. Injection molding machine with robot Manufacturer: KRAUSS MAFFEI Type: KM650-2700C2 Year of construction: 2003 Clamping force: 650 tons Tie bar spacing (HxV) 1,000 x 930 mm Screw DN: 90 mm Displacement: 1,813 cm³ Moulded part weight: 1,650 g/hp Control: MC4 Equipment of the machine: - 2 pieces of core pulls movable plate - 2 pieces of core pulls fixed plate -Closing nozzle hydraulic -Robot: Manufacturer WITTMANN, type: W643, year of manufacture: 2003 Travels: Y = 2,400 mm, X = 1,200 mm, Z = 3,000 mm

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder -Manufacturer: GPA, plastic socket welding machine type PF063-HA -Voltage: 230V -Power: 800W -Temperature range: up to 260°C -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 440/240/H125 mm -Weight: 8.5kg

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Georg Fischer GF, socket welding tool set type HE110 -Voltage: 230V -Power: 1400W -Sleeves: Ø 20 - 110 mm, see photos -Dimension box: 460/330/H160 mm -Weight: 12.6 kg

Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Georg Fischer GF, socket welding tool set type MSE 110 E -Voltage: 230V -Power: 1500W -Temperature range: up to 290°C -Sleeves: Ø 16 - 110 mm, see photo -Dimension box: 600/330/H120 mm -Weight: 15.8 kg

20 pieces of plastic windows used, good condition not openable, with frame

Arburg 570C 2200-1300 Injection Molding Machine / Hybrid Machine Production year : 2005 Injection system : Screw diameter: 60 mm Injection weight: 558 g Injection pressure: 2000 bar Dosing volume: 664 ccm Locking system : Clamping force: 220 tons Distance between columns: 570x570 mm Size of mounting plates: 795x795 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control system: SELOGICA Additional equipment: Hybrid machine: fast, energy-efficient Euromap 67 Hydraulic core extraction x 2 Injection system - bimetal Machine Main Motor--Inverter Driven Servo Motor--Energy Saving Dimensions: Weight: 9300 kg Length/Width/Height: 6.16x1.91x2.39 m

Injection moulding machine ENGEL CL 2550/550 Year of production - 2005 Robot name – "ENGEL ERC53/1-F" Clamping force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mould height [mm]-310 Max. mould height [mm]-800 Column spacing (mm) -915x860 Mounting plate size(mm)-1345x1280 Ejector stroke (max) [mm]-250 Screw diameter [mm]-80 Injection weight [g]- 1800 Oil quantity [liter]-1000 Mold Injection Sequence -2 Robot machine ready to work Number of hydraulic cores S/R- 1/1

Battenfeld BA 2000 / 1000 BK injection moulding machine Year: 1997 Driver Version: Unilog 4000 B Technical Details : Clamping Unit: Clamping force: 2000 kN Mold plate size (h x v): 800mm x 800mm Distance between columns (h x v): 560 mm x 560 mm Mould opening stroke: 450mm Mould height min.: 220 mm Maximum mould height: 520 mm Max. daylight: 970 mm Hydraulic ejector - stroke: 160 mm Forward/reverse ejector force: 67 kN Injection Unit Screw diameter : 55 mm Ls/D Ratio: 20 Injection pressure: 1943 bar Injection volume: 522 ccm Injection weight, PS: 595 g Auger speed: 285 1/min Maximum plasticizing rate: 49 g/s Nozzle pressure: 131 kN Electrical & Hydraulic Equipment Nominal pump motor capacity: 30 kW Installed heating capacity: 22.6 kW Tank capacity: 560 ltr. Dimensions & Weight Machine dimensions: 5.65 m x 1.45 m x 2.10 m Total weight of the machine: 9800 kg

Arburg 320 C 500-270 injection moulding machine Year of production: 2007 Control type: Selogica Clamping System: Hydraulic TECHNICAL DATA Closing force: 500 kN Clearance between columns: 320 mm x 320 mm Plate dimensions: 446 mm x 446 mm Mould size: min. 200 mm Maximum opening distance: 350 mm Max distance between plates: 550 mm Screw diameter: 35 mm Injection Volume / Injection Weight: 115 ccm / 105 gram PS Injection pressure: 1470 bar GENERAL DATA Motor: 11KW Heaters: 9.5 kW Dimensions L x W x H: 3.9 m x 1.4 m x 1.9 m Weight: 2400 kg

Clamping unit Clamping force [kN] 1100 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 50 Injection volume [cm3]: 393 Injection weight [g] 358 Injection pressure [bar] 1892 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Closure method Clamping force [kN] 500 Dimensions of mounting plates (hxv) [mm] 472 x 472 Clearance between columns (hxv) [mm] 320 x 320 Min./ max. mould height [mm] min 225 Maximum opening width [mm] 575 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 78 Injection weight [g] 71 Injection pressure [bar] 2210 Electrical-hydraulic equipment Pump motor rated power [kW] 15 Heater power [kW] 8,4 Dimensions & Weight Net weight with control cabinet [t] 2.25 t

Dimensions & Weight Net weight with control cabinet [t] 7.69 Dimensions (LxWxH) [m] 4.48 x 1.5 x 2.2 Clamping unit Clamping force [kN] 1250 Dimensions of mounting plates (hxv) [mm] 805 x 770 Clearance between columns (hxv) [mm] 530 x 470 Min./ max. mould height [mm] min 300mm Injection Unit Screw diameter [mm] 45 Injection volume [cm3] 275 Injection weight [g] 250 Injection pressure [bar] 1878

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 745 x 770 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] min 300 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 475 Injection weight [g] 432 Injection pressure [bar] 1564 Dimensions & Weight Net weight with control cabinet [t] 7,8 Dimensions (L x W x H) [m] 5.0 x 1.6 x 2.0

Clamping unit Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1010 x 1010 Clearance between columns (hxv) [mm] 710 x 710 Min./ max. mould height [mm] 300-710 Maximum opening width [mm] 1380 Injection Unit Screw diameter [mm] 65 Injection volume [cm3] 1078 Injection weight [g] 981 Injection pressure [bar] 1777 Dimensions & Weight Net weight with control cabinet [t] 15.2 Dimensions (L x W x H) [m] 7,60 x 1,80 x 2,40

Clamping unit Clamping force [kN] 4500 Dimensions of mounting plates (hxv) [mm] 1270 x 1200 Clearance between columns (hxv) [mm] 900 x 800 Min./ max. mould height [mm] min 480 Maximum opening width [mm] 1650 Injection Unit Screw diameter [mm] 90 Injection volume [cm3] 1953 Injection weight [g] 1777 Injection pressure [bar] 1742 Electrical-hydraulic equipment Pump motor rated power [kW] 90 Heater power [kW] 59 Dimensions & Weight Net weight with control cabinet [t] 26.3 Dimensions (L x W x H) [m] 7.98 x 2.35 x 2.51m

Clamping unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 1050 x 900 Min./ max. mould height [mm] min 350 Maximum opening width [mm] 1200 Injection Unit Screw diameter [mm] 55 Injection volume [cm3] 556 Injection weight [g] 130 Injection pressure [bar] 1763 Electrical-hydraulic equipment Pump motor rated power [kW] 37 Heater power [kW] 19,8 Dimensions & Weight Net weight with control cabinet [t] 19

Clamping unit Clamping force [kN] 1300 Dimensions of mounting plates (hxv) [mm] 670 x 670 Clearance between columns (hxv) [mm] 470 x 470 Min./ max. mould height [mm] 225-500 Maximum opening width [mm] 930 Injection Unit Screw diameter [mm] 40 Injection volume [cm3] 251ccm Injection weight [g] 228 Injection pressure [bar] 2100 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Power of heaters [kW] 12.1 Dimensions & Weight Net weight with control cabinet [t]: 4.8t Dimensions (LxWxH) [m] 4.9x1.33x2

Clamping unit Clamping force [kN] 1000 Dimensions of mounting plates (hxv) [mm] 605 x 605 Clearance between columns (hxv) [mm] 420 x 420 Maximum opening width [mm] 750 Injection Unit Screw diameter [mm] 35 Injection volume [cm3] 144 Injection weight [g] 132 Injection pressure [bar] 1820 Electrical-hydraulic equipment Pump motor rated power [kW] 18.5 Heater power [kW]: 6.5 Dimensions & Weight Net weight with control cabinet [t] 3.18 Dimensions (LxWxH) [m] 4.3 x 1.7x 1.8

Clamping unit Clamping force [kN] 750 Dimensions of mounting plates (hxv) [mm] 590 x 590 Clearance between columns (hxv) [mm] 370 x 370 Min./ max. mould height [mm] 200 Maximum opening width [mm] 730 Injection Unit Screw diameter [mm] 30 Injection volume [cm3] 106 Injection weight [g]: 95 Injection pressure [bar] 2042 Dimensions & Weight Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 4.06 x 1.33 x 1.79m

Electric Injection Molding Machine ! Clamping unit Clamping force [kN] 600 Dimensions of mounting plates (hxv) [mm] 720 x 600 Injection Unit Screw diameter [mm] 35 Injection volume [cm3]: 154 Injection weight [g] 140 Injection pressure [bar] 2400 Dimensions & Weight Net weight with control cabinet [t] 5,7 Dimensions (L x W x H) [m] 4.7 x 1.4 x 2.7