plastic pvc used for sale

Clamping unit Clamping force [kN] 550 Dimensions of mounting plates (hxv) [mm] 530 x 500 Clearance between columns (hxv) [mm] 360 x 355 Min./ max. mould height [mm] min 150 Maximum opening width [mm] 500 Injection Unit Screw diameter [mm] 32 Injection volume [cm3] 75,5 Injection weight [g] 69,54 Injection pressure [bar] 1030 Dimensions & Weight Net weight with control cabinet [t] 2,25 Dimensions (L x W x H) [m] 3.25 x 1.09 x 2.04

Width: 82,6mm plastic 1 pack = 3.048mtr More then 300 machines new and second hand on our seema .de

Plastic band wrapper More then 300 machines new and second hand on our seema .de

27 plastic planks yellow with 2 stainless steel trolleys

approx. 80 plastic pallets 60x40x15 stackable pc 5,00 Euro

WASA underlay boards/plastic boards are offered. Dimensions: 1450x1150x50. 1350 pieces.

Key data: 400 kN, 21 g/PS, 18 mm

Arburg 270 U 400-70 Year of construction: 5/2006 Clamping force: 40 tons. Screw diameter: 18 mm Operating hours: 36000 h additionally 2 Regloplas temperature control units + dryer feeder Fasti

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700

Key data: 500 mm, 25

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100

Key data: 500 mm, 30

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Key data: 300 kN, 50 g/PS, 28 mm

Used injection moulding machine Dr. Boy 30 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 28 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 280 mm (height) x 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH and PIOVAN vacuum cleaner possible for an extra charge incl. installation More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Photos are sample images

Key data: 220 mm, 44 , 28

Used injection moulding machine Dr. Boy 22 M Procan from ongoing production It can be sold in the condition of functional tested or partially overhauled or refurbished. Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Example photo of identical machine

Key data: 220 mm, 18 , 18

Used, refurbished injection moulding machine Dr. Boy 22 M Procan Parts warranty available. Plasticizing unit 18 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Blow-out device 1-fold Clear width between homens: 254 mm (width) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine

Key data: 250 mm, 37 , 24

Used, refurbished injection moulding machine Dr. Boy 25 M Procan Parts warranty available. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 254 mm (width) x 254 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine

Key data: 500 mm, 121 , 38

Used injection moulding machine Dr. Boy 50 M Procan from ongoing production Parts warranty available. Plasticizing unit 38 mm thermoplastic open nozzle Water distributor 6-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 335 mm (width) x 305 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine Offer subject to change

Key data: 800 mm, 179 , 42

Used injection moulding machine Dr. Boy 50 M Procan from ongoing production Parts warranty available. Plasticizing unit 42 mm thermoplastic open nozzle Water distributor 6-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 410 mm (width) x 358 mm (height) 400V / 50 Hz Operating instructions Suitable handling Vonnahme GmbH possible for an extra charge incl. assembly More Dr. Boy injection molding machines from 220 KN to 80 KN in stock Sample photo of refurbished machine Offer subject to change

Key data: 273 mm, 49 , 28

Used injection molding machine Dr. Boy 30 M + Screen controlled machine mipronic + Sold in functional tested or partially overhauled condition. Plasticizing unit 24 mm thermoplastic open nozzle Water distributor 4-fold Decompression Oil level and temperature monitoring Material Funnel Machine feet Hydraulic ejector 80 mm with stroke limitation Handler Device Interface Clear width between homes: 255 mm (height) x 255 mm (width) 400V / 50 Hz Operating instructions More Dr. Boy injection molding machines from 220 KN to 80 KN in stock More Dr. Boy Injection Moulding Machine 30 M mipronic (Schleicher Control) in stock Plasticizing cylinder 18 mm, born in 1990 Sample photo Offer subject to change

Plastic pallets SANKO D4-1111-6 1100 x 1100 x 150 mm static: 4000 kg dynamic: 1000 kg tare weight: 10.3 kg used, tested ! Dimensions: 1100 x 1100 x 150 mm Minimum quantity: 5 pieces !

Key data: 1000 kN, 127 g/PS, 35 mm

Regularly maintained machine that is always kept in top condition. The screw rotation is done with an electric servo motor, which is an energy-efficient solution. The rest of the machine is identical to the standard version of the 420 S. The presence of the core puller in this type is extra. Another special feature is that the injection molding unit can be moved from the center. Software and technologies can be read from a CF floppy disk. The display can be done in both Hungarian and German. Manuals can also be in German or Hungarian. Currently, the machine has a 35 auger for technical materials in good condition. A video of the operation of the machine has also been created, which can also be tried out in person at our site. Please see our other ads.

General SKU408U1286 LocationBarneveld MakeScan-Vibro VAV TypeSRS 1250x3200 No.40459 Year of construction2009 Main Features MaterialStainless steel Surface4 m2 Size length3200 mm Sizes width1250 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface4 m² Number of sieve decks:2 Sieve sizes1250x3200 mm With covercheck (3x)1250x600 mm InletDia. 250 mm OutletDia. 250 mm (2x) Drive vibro motor2x Motor2.2 kW, 680Volt (ATEX II2G/D EExe IIT4) (2x) Sieve perforation2x2mm MaterialStainless steel 1.4301 (304) Information Mounted on stainl. st. framecheck Total height2,20 m Weight2000 kg CEcheck Floor space4,20x1,6 m ATEX compatiblecheckPlastic & rubberPlastic & polymersOther feedOther chemicalOrganicsConsumer wasteVibro sievesVAV Scan-VibroIndustries > Recycling > Plastic & rubberIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Other fe ...

The rewinder / perforator is used to rewind the foil from the thimble to the thimble with the control of the foil rewinding length. It also allows you to make perforation at a certain length. Thanks to this machine, it is possible to make very long pieces of foil, used in industry or agriculture. The machine is powered by 380V.

complete plant multi filament polypropylene yarn 2 independent lines compound: 2 extruders diam. 45mm complete with dosamaster 2 ironing groups of 6 godets each 6 COMOLI winders 1 ATLAS COPCO 18+ compressor 1 chiller spare parts various dies for both solid wire and hollow wire hourly production about 50 / kg hh with a title of 1500 den

Calander - calender capacity 1t per hour - extruder capacity 2t per hour - two-stage cascade extruder (upper: planetary extruder; lower: single screw extruder) - three rollers - rollers drive - AC motors powered by inverters. - max width 1400 mm (in a thickness range of 100-500 myx) - max width 1000 mm (in a thickness range of 510-1000 myx) - max temperature 230C - oil / electric shaft heating - 3 winders - expansion shafts 152 and 76 mm - possibility of producing laminates by thermo-lamination

I offer a carding machine along with the weight of the Befama brand after a general overhaul. The machines have been completely renovated, including painting. Equipped with sawing material with a working area of 2000 cm. I also offer a number of other machines for the textile industry - including a complete line for the production of drag.

Line for the assembly of lip gloss / mascaras We offer a practically new (production year: 2018) line for the assembly of lip gloss or mascaras, the manufacturer of which is the Italian company SYCMA. The line consists of the following machines: 1. Machine for mounting the cap (capacity: 2 500 pcs / h) 2. Machine for sealing a bottle with a collar (2 devices; capacity of one: 1,350 pcs / h) 3. Machine for assembling the scraper (capacity 2 160 pcs / h) The line has so far produced only approx. 380,000 pcs.

Screw diameter; 60 mm Injectable volume: 792cm3 Injection pressure: 2500 bar Column width: 720 x 720 mm Minimum mould thickness: 300 mm max: 700 mm Aperture stroke: 700 mm Cores: 3 Robot Interface: YES Options with ARBURG robot

Screw diameter; 105 mm Injectable volume: 3611 cm3 Injection pressure: 1580 bar Column width: 1000 x 930 mm Minimum mould thickness: 600 mm Opening stroke: 1150 mm Cores: 6 Robot Interface: Yes Options: Robot Interface 20 mold heating zones Sequential Injection

Conveying chain, plastic, curvilinear, TAB, 82,6mm, Radius 200mm, 1 pack = 3,048mtr. More then 300 machines new and second hand on our seema .de

Key data: 3000 kN, 850 g/PS, 70 mm

Engel ES 1350/300 HL Year of construction 2001 + 2003 Hours: 77623 h + 92737 h Clamping force: 300 tons. Screw diameter: 70 mm 4 core pulls incl. Wittmann removal robot

Description: 700 liter volume (6 pieces) , 1500 liter volume (1 piece) Approx. Onsite Dimension. (l x w x h): 2,000 x 1,300 x 1,500 mm, weight approx.: 150 kg

Description: Individual dimensions: , each ,1500x1500x1300 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 3,000 x 2,600 mm, weight approx.: 300 kg

Description: Barrel volume 310 l each Individual dimensions: diameter 800 mm, height 850 mm Approx. Onsite Dimension. (l x w x h): 1,600 x 2,500 x 1,300 mm, weight approx.: 550 kg

S/s heavy duty display rack, 4 floors, plastic tops,dimensions: 360 mm x 500 mm x 1160 mm.

S/s heavy duty display rack, 4 floors, plastic tops, dimensions: 2700 mm x 380 mm x 1170 mm.

Maja ice machine with plastic trolley, trolley dimensions: 660 mm x 620 mm x 680 mm, total dimensions: 700 mm x 710 mm x 1400 mm.

9 plastic crates, dimensions: (9x) 730 mm x 530 mm x 200 mm.

Lot Composed of various machinery for the processing of plastic and wooden components for eyewear. n.1 Ventilation System with extractor and filters: Used for the extraction of fumes generated by the combustion of PVC materials in ovens. n.1 Cielle CNC machine: Used for milling and cutting wooden components for glasses. Brand Cielle Model ALFA 61X6, Year 2011, S/N 24/11 WEIGHT 250kg VOLT 220/240 POWER 1800W n.1 Double action oven: Used for firing PVC material (Working temperatures up to about 300 degrees Celsius, 4 pieces. n.1 Green Box Chiller for closed-loop cooling of machinery. n.1 Press and Dehumidifier (5 pieces) : o Press: Used to cut labels that were then printed on the fabric. o Dehumidifier: Used to dehumidify TPU material into granules. o 1 Laser : Used for laser cutting organic material, also used for cutting fabric (textile). Can also be used for engraving. o n ...

Key data: 700 kN, 139 g/PS, 35 mm

Year of construction: 2002 Clamping unit - Clamping force: 700 kN - Tie bar width: tie-barless - Tool installation height 250/ 700 Injection unit - Shot weight (HP): 139 g - Screw diameter: 35 mm Pump running time - approx. 81,042 h Remark: - Dispensing without sprue picker and external Peripherals - VT card 2 defective General - 4 core pulls

Key data: 800 kN, 149 g/PS, 35 mm

Year of construction: 1997 Clamping unit - Clamping force: 800 kN - Handle width: 400 x 400 mm - Tool installation height 250/ 700 Injection unit - Shot weight (PS): 149 g - Screw diameter: 35 mm Remark: - Dispensing without sprue picker and external Peripherals - Displacement measuring system for Screw movement changed - Hydraulic motor for worm drive Switched in 2019 - 02/2022 Hydraulic hoses changed - Cavitation in pump - Plasticizing unit is needed as a replacement for other machines and is not included! General - 2 core pulls -Machine is still in operation Pump running time - approx. 114,000h Other: -Submission expected June/ July 2024 -for the production of spare parts

Elephant foot plastic grey, with step

Letter trays plastic black approx. 19 pcs.

Output capacity 1000 kg/h Running hours From year 2005 24/7 40.1896.005 Product pipeline 40.1896.006 Spinning 40.1896.007 Quench air duct 40.1896.008 Air ducts, spinning tube 40.1896.009 Quench air duct spin finish unit 40.1896.046 Fiber draw – off wall 40.1896.049 Feed roller assembly 40.4896.050 Sunflower wheel

Roller conveyor, s/s frame, plastic rollers, roller width: 450 mm, total dimensions: 2030 mm x 550 mm x 700 mm.

Mettler-Toledo mobile metal detector, plastic belt, belt width: 320 mm, clearance: 350 mm x 140 mm, total dimensions: 1700 mm x 1000 mm x 1600 mm. Last calibrated: 07-2023.

4 Frontmatec roller conveyors, s/s frame, plastic rollers, rollery width: 460 mm, total dimensions: (4x) 3000 mm x 540 mm x 800 mm.

Mobile elevating belt, s/s frame, plastic belt, belt width: 280 mm, elevating height: 1450 mm, total dimensions: 2000 mm x 800 mm x 1700 mm.

Plastic curtain, dimensions: 2300 mm x 2600 mm.

Safeline mobile metal detector, plastic belt, belt width: 320 mm, clearance: 350 mm x 150 mm, total dimensions: 1200 mm x 850 mm x 1200 mm. Last calibrated: 04-2024

Description: Composed of: N°5 green color plastic boxes 350x450x220 mm, N°2 of red color 350x450x220 mm, N°2 of blue color  ,350x450x220 mm, A single green box equipped with a lid. TRANSPARENT BOXES ARE IN LOT 914 Approx. Onsite Dimension. (l x w x h): 450 x 700 x 2,220 mm, weight approx.: 30 kg