plastic mold injection used for sale

Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes

ENGEL DUO7050/500 (500 ton & 70mm screw)

Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) Pvlzwy immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h +Schließeinheit+ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 570 x 570 mm Injection unit 1 (150 unit) Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 2 (150cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 3 (60cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 1 ALLROUNDER 420  ...

Displacement: 1500 cm³ Clamping force: 2500 kN Injection pressure: 2000 bar Table height: 1,000 mm Locking system: fully hydraulic Voltage: 380 V Motor power: 26 kW Cooling water: 1 m³/h Weight: 5.5 t - Injects from above (type ZO) - Ergonomic overall design of the vertical machine - Generously dimensioned clamping unit - Extensive automation options for vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

Table height: 1000 mm Locking system: fully hydraulic Clamping force: 2500 kN Spray volume: 1500 cm³ Hydraulic oil: 40/46 cPcs. Compressed air: 6 bar Voltage: 400 V Weight: 6.35 t - Injects from below (type VU) - Ergonomic overall design - Generously dimensioned clamping unit - Fully hydraulic extensive automation possibilities of vertical machines - "One Piece Design" for maximum flexibility The machine belongs to a German company and until recently was in operation at their Serbian plant and ran flawlessly.

Used machine in good condition. Available for immediate delivery. - Air Valves: 1 - Screw diameter: 50 mm - Shot weight max: 353 g - Injection rate: 217 cm?/s - Injection pressure: 1.430 bar - Injection volume: 343 cm? - Platen size (h x v): 820 x 750 mm - Ejector force: 1750 kN - Core pulls: 1 - Power: installed max: 15,3 + 30 kW - Operating hours: 0 - Dimensions (long x wide x high): 5.750 x 1.680 x 2.190 mm - Weight: 11.500 kg

Screw diameter 30mm Spray weight 88g Spray pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of clamping plates 550x430mm Controller CC90 (Norwegian language) Weight 3000kg Dimensions 3,51x1,22x1,90m Heating capacity 6.9 kW Total power 21,9kW

Inv. Num. : 5849 Type: IS 220 GN Producer: TOSHIBA Created: 2002 Parameters: Clamping force: 2150 kN Screw diameter: 50 mm Injection capacity: 490 cm³ Injection mass: 450 g Min. height of the clamping plate: 870 mm Min. width of the clamping plate: 820 mm Distance between stands (horizontal): 610 mm Distance between stands (vertical): 560 mm Ejector force: 140 kN Ejector stroke length: 800 mm Maximum spray pressure: 201 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1340 mm Machine height: 1840 mm Spray weight: 8600 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 104 g - Injection rate: 111 cm?/s - Injection pressure: 2.400 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Screw L/D ratio: 23,6 - Nozzle stroke / force max.: 250 / 47 mm / kN - Nozzle stroke max: 160 mm - Clamping force: 1.600 kN - Mould opening stroke max: 600 mm - Mould height max: 300 mm - Mould height min: 300 mm - Daylight between platens max: 900 mm - Distance between tie-bars h: 550 mm - Distance between tie-bars v: 550 mm - Platen size h: 750 mm - Platen size v: 750 mm - Ejector force: 61 kN - Control: CC200 - Oil tank capacity: 460 l - Power: installed max: 30 kW - Operating hours: 28.140 - Dimensions (long x wide x high): 5.800 x 1.700 x 2.400 mm - Weight: 9.500 kg

ENGEL E-DUO 1340/700 (700 ton & 60mm screw) injection molding machine

Battenfeld HM 240 1330 2011 Battenfeld TM 400 2250 2009 We have 2 thermoset injection machine to sell. Battenfeld BCT 1800-1000 year 1994 (with Robot) Battenfeld BCT 1800-1000 year 1993 TM 27001900 BA 600200 CDC TM35001330 BA 1000 BKT THERMOSET INJECTON MACHINES Thermoset Inj. Machine- I Thermoset Inj. Machine- II With Battenfeld Robot BATTENFELD BCT 1800/100 BATTENFELD BCT 1800/100 Construction Year 1993 1994 Screw Diameter Ø60 mm Ø55 mm Clearance between tie bars 515 x 515mm 515 x 515mm Day light 1.000mm 1.000mm Working Hours 81814 h 57929 h Also: Name Battenfeld Battenfeld Type of machine HM-E 240/ 1330 INSIDER TM-E 400/2250 Control system Unilog B6E Unilog B6 Year of manufacture 2011 2009 operation hours 17 254 11 288 Cla ...

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes

Arburg 520C-1300-350 (163) with bimetal plasticizing unit General information Item number: 163 Availability: In stock Year of construction: 1999 Brand: Arburg Specifications Spray weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 520x520 mm Clamping plate size: 715x715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 95616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Funnel: No Core train: Yes Euromap: Yes

ALREADY SOLD MORE MACHINES COMING SOON BMB High Tonnage Injection Molding Machine 1000 Tons Model KW 1000 / 7500 Year of Manufacture 2000 Voltage 400 Frequency 50hz Availability, ready to load See pictures please

ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzle cylinder heating: 1600 +3 x 900 kW Oil tank: 50 l. Voltage: 50Hz Heating: 4.6 kW Total connection: 12.1 kW Weight: 1260kg.

Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes

Engel Victory 200/50 Focus (150) without funnel General information Item number: 150 Availability: In stock Year of construction: 2007 Brand: Engel Specifications Spray weight: 89 g Clamping force: 500 kN Screw diameter: 30 mm Spray pressure: 1451(2205) bar Spar spacing: Tie barless Clamping plate size: 450 x 500 mm Control: EC 200 Language: German Power: 31 kW Operating hours: 79044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m Funnel: No Core train: Yes

screw size:70 mm clamping force:3.500 - 5.000 kN screw size:70 mm max. swept volumne:1.155 cm³ injection pressure:1.480/1.780 bar Injection unit complete with hydraulic block and valves (available twice). The injection units were installed on an ES900WP combi! Payment terms: 100% prior to delivery

Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone

H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller

Used machine in good condition. Available for immediate delivery. - Screw diameter: 75 mm - Shot weight max: 1.640 g - Injection volume: 1.725 cm? - Clamping force: 3.800 kN - Daylight between platens max: 700 mm - Platen size (h x v): 1.025 x 945 mm - Dimensions (long x wide x high): 8.400 x 2.000 x 2.700 mm - Weight: 19.000 kg

- Euromap: E12 press, E67 robot, connected by E12 / E67 converter - Including Wittmann W733-0398 robot 2007, X900, Y1800, Z3000, C-pneu - Screw diameter: 55 mm - Injection volume: 617 cm? - Screw L/D ratio: 20 - Clamping force: 3.500 kN - Mould height max: 860 mm - Mould height min: 250 mm - Cascades / Sequential valve gates: 4 - Platen size (h x v): 1.080 x 1.080 mm - Distance between tie-bars (h x v): 735 x 735 mm - Ejector force: 3.500 kN - Control: CC100

Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

Used machine in good condition. Available for immediate delivery.

Used machine in good condition. Available for immediate delivery.

Used machine in good condition. Available for immediate delivery. - Clamping force: 1.600 kN - Screw diameter: 50 mm - Injection pressure: 1.714 bar - Injection volume: 442 cm? - Distance between tie-bars (h x v): 570 x 520 mm

- Levelling support - 16 cooling circuits: Total 21 - Barrier type screw, bimetallic type - Interface colorimeter - Interface Robot Euromap 67 - Air Valves: 4 - Clamping force: 2.100 kN - Screw diameter: 52 mm - Shot weight max: 455 g - Injection pressure: 1690 bar - Injection volume: 500 cm? - Mould height max: 650 mm - Mould height min: 200 mm - Platen size (h x v): 900 x 790 mm - Distance between tie-bars (h x v): 630 x 530 mm - Core pulls: 2 pneumatic + 2 hydraulic - Operating hours: 38.233 - Power: installed max: 43 kW - Weight: 9.480 kg - Dimensions (long x wide x high): 6.800 x 1.540 x 2.200 mm

Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes

As of today, 92,434 operating hours, Screw diameter is 190 mm. Aggregate 45050. L/D 22 Barrier screw with mixed part. Dosing distance 900 mm displacement 25,520 sqcm. Shot weight approx. 18 kg. Length of the machine 17,418 mm Width of the machine 4,300 mm Height of the machine 3436 mm Weight of the machine 156 to. With oil pan Robot ERC 125/0-F, / Year of construction 2006 Lights Holab distance 2,000 x 1,600 mm (h / v) Clamping plates 2,900 x 2,500 mm (h / v) Max plate spacing 3,800 mm Min tool installation height 800 mm Max tool installation height 1,800 mm 32 heating zones Core pulls 2 pieces fixed side / 4 movable side Needle closure / cascade hydraulic 10 pieces Needle closure / cascade pneumatic 8 pieces

Key data: 900 , 134 , 35

Now fully refurbished and in our stock in Wellingborough, Northamptonshire is this tie-bar-less Engel Victory 330/90 Tech injection moulding machine. Fitted with a 35mm plasticising unit which gives a maximum shot weight of 134 (PS) (g). This is a high specification machine with double core pull, CC100 controller, singe pneumatic core pull and 8 zone hot runner controller built in. It comes complete with system disks to suit the machine. The unique design of these machines allows for large tools to be installed with ease and often much larger than could go in comparable 90T machines with tie-bars. A very versatile machine with proven technology and good support from the people at Engel UK. This machine is now holding maximum lock, has no detectable wear in the plasticising unit and is cosmetically excellent. You can find out more about the work we’ve done to this specific machine by ...

Key data: 1000 , 158 , 40

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 40mm plasticising unit which gives a maximum shot weight of 158 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo  ...

used injection moulding machine in fully functional condition Manufacturer: Engel Type: ES 330/75 Year of construction 2002 Masch.Nr. on request Control: EC100 Clamping unit Clamping force: 750 kN/ 75 to. Spar spacing: tie barless Tool clamping plates: 660 x 560 mm (hxv) Opening distance: 450 mm Wkzg. Installation height: 235 mm min. Distance clamping plates: 685 mm max. BAP/FAP centering: 110 mm Fq7zqir Injection unit Screw diameter: 30 mm (highly wear-resistant bi-metal) Spray volume: 113 cc Spray weight: 102 gr/HP Spray pressure: 2152 bar /2415 (increased) Extras Robot Interface (indiv) Machine without spray-sided full cladding Conveyor belt interface Interface Operating Data Acquisition Tool locking interface Interface for pneumatic closure nozzle Interface for 32-pin peripheral equipment Microcomputer with TFT color screen (EC100 A03) Witt ...

Used machine in good condition. Available for immediate delivery. - Injection pressure: 1.817 bar - Injection volume: 2.290 cm? - Clamping force: 4.500 kN - Power: installed max: 90 + 50,6 kW - Weight: 28.000 kg

Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 460 x 410 mm - Screw diameter: 25 mm - Shot weight max: 54 g - Injection rate: 108 cm?/s - Injection pressure: 2.400 bar - Injection volume: 59 cm? - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 225 / 28 mm / kN - Clamping force: 1.000 kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Daylight between platens max: 800 mm - Platen size (h x v): 650 x 600 mm - Cascades / Sequential valve gates: n/a - Heating zones: 4 2 - Control: CC200 - Core pulls: n/a - Oil tank capacity: - l - Operating hours: 16.280 - Power: installed max: 22 kW - Weight: 4.500 kg - Dimensions (long x wide x high): 4.300 x 1.300 x 1.900 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Clamping force: 2400 kN - Shot weight max: 456 g - Injection rate: 2.375 cm?/s - Injection pressure: 1.890 bar - Injection volume: 475 cm? - Screw L/D ratio: 22,7 - Nozzle stroke / force max.: 88 mm / kN - Mould opening stroke max: 510 mm - Mould height max: 800 mm - Mould height min: 260 mm - Distance between tie-bars (h x v): 630 x 630 mm - Mold opening force: 534 kN - Core pulls: 0 - Oil tank capacity: 420 l - Operating hours: 0 - Power: installed max: 55 kW - Weight: 15.800 kg - Dimensions (long x wide x high): 7.208 x 2.075 x 2.187 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 65 mm - Clamping force: 2.500 kN - Shot weight max: 1.072 g - Injection rate: 3.100 cm?/s - Injection volume: 1.128 cm? - Mould height max: 650 mm - Mould height min: 200 mm - Platen size (h x v): 910 x 840 mm - Heating zones: 4+1 - Distance between tie-bars (h x v): 630 x 560 mm - Control: 0 - Oil tank capacity: 800 l - Operating hours: 0 - Weight: 14.500 kg - Dimensions (long x wide x high): 7.395 x 2.215 x 1.920 mm

with Sepro robot - Distance between tie-bars (h x v): 640 x 625 mm - Screw diameter: 55 mm - Shot weight max: 595 g - Injection rate: 310 cm?/s - Injection pressure: 1.906 bar - Injection volume: 614 cm? - Screw speed: 318 rpm - Screw L/D ratio: 23,5 - Clamping force: 2.750 kN - Mould opening stroke max: 580 mm - Mould height max: 640 mm - Mould height min: 200 mm - Daylight between platens max: 1.220 mm - Platen size (h x v): 935 x 920 mm - Control: CINCINNATI MILACRON CAMAC 486 - Power: installed max: 32 kW - Dimensions (long x wide x high): 7.500 x 1.510 x 2.377 mm - Weight: 11.698 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 293 g - Injection rate: 230 cm?/s - Injection pressure: 2.360 bar - Injection volume: 318 cm? - Screw speed: 230 rpm - Nozzle stroke / force max.: 350/67 mm / kN - Ejector stroke / force max.: 200/83 mm / kN - Clamping force: 3.000 kN - Mould opening stroke max: 850 mm - Mould height min: 350 mm - Daylight between platens max: 1.200 mm - Platen size (h x v): 1050 x 650 mm - Mold opening force: 196 kN - Control: CC100 - Oil tank capacity: 810 l - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.700 x 2.000 x 2.300 mm - Weight: 21.000 kg

with - Screw diameter: 60 mm - Clamping force: 200 kN - Injection volume: 508 cm? - Mould opening stroke max: 650 mm - Mould height min: 250 mm - Platen size (h x v): 715 x 715 mm - Distance between tie-bars (h x v): 470 x 470 mm - Operating hours: 60.000 - Power: installed max: 15 + 30 kW - Weight: 6.630 kg - Dimensions (long x wide x high): 6.000 x 1.500 x 2.400 mm - Weight: 6.500 kg

Used machine in good condition. Available for immediate delivery.

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 77 g - Injection pressure: 2.500 bar - Injection volume: 85 cm? - Ejector stroke / force max.: 22 / 10 mm / kN - Daylight between platens max: 550 mm - Heating zones: 3.200 x 1.310 x 1.800 - Platen size (h x v): 540 x 540 mm - Distance between tie-bars (h x v): 321 x 321 mm - Mold opening force: 40 kN - Control: MC4 - Oil tank capacity: 170 l - Power: installed max: 15 kW - Operating hours: 55.000 - Weight: 2.300 kg

Used machine in good condition. Available for immediate delivery. - Clamping force: 1.400 kN - Screw diameter: 40 mm - Injection pressure: 2.100 bar - Injection volume: 220 cm? - Screw L/D ratio: 20 - Mould opening stroke max: 500 mm - Mould height max: 480 mm - Mould height min: 240 mm - Daylight between platens max: 980 mm - Platen size (h x v): 650 x 650 mm - Distance between tie-bars (h x v): 430 x 430 mm - Core pulls: 1 - Power: installed max: 18,5 + 9,60 kW - Weight: 6.800 kg - Dimensions (long x wide x high): 5.100 x 1.800 x 2.250 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 90 mm - Injection pressure: 1.919 bar - Injection volume: 2.740 cm? - Screw L/D ratio: 20 - Ejector stroke / force max.: 300 / - mm / kN - Clamping force: 8000 kN - Mould opening stroke max: 1.350 mm - Mould height max: 2.000 mm - Mould height min: 650 mm - Platen size (h x v): 1.570 x 1.480 mm - Distance between tie-bars (h x v): 1.025 x 935 mm - Core pulls: 5 - Operating hours: 62.870 - Dimensions (long x wide x high): 10.085 x 5.300 x 2.120 mm - Weight: 38.000 kg

ROBOT ENGEL ERC65 X-axis 800 (EUROMAP standar) Y-axis 1400 Z-axis: 2840 A-axis C-axis 2 x vacuum 3 x gripper - Screw diameter: 60 mm - Shot weight max: 650 g - Injection volume: 769 cm? - Screw L/D ratio: 23 - Ejector stroke / force max.: 250 / mm / kN - Clamping force: 3.500 kN - Mould opening stroke max: 1.300 mm - Mould height max: 920 mm - Mould height min: 380 mm - Daylight between platens max: 1.300 mm - Platen size (h x v): 1.060 x 1.095 mm - Cascades / Sequential valve gates: 6 - Distance between tie-bars (h x v): 710 x 710 mm - Control: MC 4 - Core pulls: 5 - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.500 x 2.100 x 2.380 mm - Weight: 15.500 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Shot weight max: 460 g - Injection pressure: 1.650 / 2.050 bar - Injection volume: 510 cm? - Clamping force: 3.500 kN - Mould opening stroke max: 1.000 mm - Daylight between platens max: 1.650 mm - Platen size (h x v): 1.200 x 1.100 mm - Distance between tie-bars (h x v): n/a mm - Control: CC200 - Core pulls: 4 - Power: installed max: 45 kW - Dimensions (long x wide x high): 7.500 x 2.200 x 2.400 mm - Weight: 27.000 kg

PONAR ŻYWIEC UT 090 H injection moulding machine was built in Poland in 2007. The machine is used in processing thermoplastics using the injection moulding method. The hydraulic mould closing unit, operating with a closing force of 90 tons, is protected with significantly offset fixed and movable covers facilitating the installation of complex moulds with their accessories. The mounted moulds can be a minimum of 225 mm high, while the mould clamping plates have dimensions (L x W) of 615 x 615 mm. A MOOG-BUHL CNC control unit enables the machine to operate in any desired manual or automatic mode, as well as setting and monitoring the injection process parameters. The screw of the machine with a diameter of 30 mm rotates at a speed in the range of 10 to 380 rpm. The equipment of the machine for plastic injection moulding includes, among others, a plastic feeder and a crane with a multi ...

PONAR ŻYWIEC UT-025 H injection moulding machine built in Poland in 2005, is used in the process of processing thermoplastics by injection moulding. The characteristic feature of the machine is a two-plate hydraulic mould closing system with attached closing cylinders, working with a force of 25 tons. The machine’s screw with 22 mm in diameter rotates at a speed from 10 to 370 rpm and is driven directly by a hydraulic motor. The high-tech control system of the MITSUBISHI FX2N-48MT-ESS/UL allows for high automation of the injection process with setting and control of the injection parameters from the control panel located on the body of the machine. The injection moulding machine is offered with a wide range of equipment, including a plastic feeder and a MITSUBISHI E600 HMI panel. Total weight of the machine is 1470 kg. Characteristics of PONAR ŻYWIEC UT-025 H injection moulding ...

REP H48Y10W Horizontal Injection Moulding Machine Year of construction 2005 Machine Parameters Volume [cm3] 1000 Clamping force [kN] 1930 Injection pressure [bar] 1500 Moulds dimension [mm] 450x450 Tonnage 1.9t Platen size: 450x450 Cycles: 2,220,383 General condition: operational Dims [mm]: 4200 L x 1400 W x 2200 H Weight [kg]: 6750