plastic mold injection used for sale

B&A REF: 9009 TON: 220 SHOT WEIGHT: 575G SCREW DIAMETER: 55MM STROKE VOLUME: 529CM3 INJECTION PRESSURE: 1550BAR PLATEN SIZES: 860 X 860MM DBTB: 585 X 585MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 630MM MOULD OPENING STROKE: 580MM MAX DAYLIGHT: 1210MM EJECTOR STROKE: 230MM CONTROLS: SEF 2000 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC

B&A REF: 9008 TON: 800 SHOT WEIGHT: 3687G SCREW DIAMETER: 100MM STROKE VOLUME: 3927CM3 INJECTION PRESSURE: 1470BAR PLATEN SIZES: 1470 X 1470MM DBTB: 1010 X 1010MM MIN MOULD HEIGHT: 380MM MAX MOULD HEIGHT: 975MM MOULD OPENING STROKE: 1025MM MAX DAYLIGHT: 2000MM EJECTOR STROKE: 300MM CONTROLS: KEBA AIR VALVES: 2 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

Screw diameter; 30 mm Injectable volume: 99 cm3 Injection pressure: 1450 bar Trays dimensions: 920 x 400 mm Minimum mould thickness: 190 mm max: 520 mm Opening stroke: 330 mm Cores: 3

Screw diameter: 55 mm Injectable volume: 515 cm3 Injectable weight: 460 g Injection pressure: 2400 g Column width: 1020 x 920 mm Aperture stroke: 900 mm Mould thickness: min: 600 mm - max: 1050

Screw diameter: 40 mm Injectable volume: 182 mm Injection pressure: 2120 mm Passage between columns: 420 x 420 mm Opening stroke: 500 mm Core: 1 Blower: Robot Interface

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Screw diameter; 95 mm Injectable volume: 3360cm3 Injection pressure: 1895 bar Column width: 1000 x 900 mm Minimum mould thickness: 40 mm max: 950 mm Aperture stroke: 930 mm Cores: 4 Robot Interface: Yes Options: Retractable Column - Electric Dosing Motor 24 Zones Mold Heater Magnetic trays 8-point sequential injection Blow guns: 2 3-axis robot

Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

Screw diameter: 60 mm Injectable volume: Injection Pressure: Passage between columns: 735 x 735 Mould thickness: min: 330mm- max: 680 Opening stroke: 660 mm Number Of Cores :2 Robot interface: E67

Clamping force 150 ton

Key data: 5800 , 2860 , 90

Screw diameter: 90 mm Injectable volume: 2860 cm Injectable weight: 2700 g Column width: 960 x 830 mm Opening stroke: 1000 mm Mould thickness: min: 300 mm -max: 900mm 2 hydraulic cores

Inv. Num. : 7418 Type: Concept 420/810-2300 Producer: Demag Created: 2006 Parameters: Clamping force: 420 t Screw diameter: 60 mm Injection capacity: 891 cm³ Injection mass: 800 g Height of the clamping plate: 1200 mm Width of clamping plate: 1100 mm Distance between uprights (horizontal): 800 mm Distance between uprights (vertical): 710 mm Maximum spraying pressure: 2420 bar Machine length: 7900 mm Machine width: 2200 mm Machine height: 2500 mm Injection weight: 20000 kg

Description: Machine number: 44314 Operating voltage: 400 V Frequency: 50 Hz Rated current: 50 A Closing force: 50 to Approx. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 2,000 mm, weight approx.: 3,000 kg

Description: Machine number: 175808 Operating voltage: 400 V Frequency: 50 Hz Heating connection: 14.9 kW Pump motor: 30 kW Total connection: 44.9 kW Clamping force: 1600 kN Screw diameter: 50 Platen dimensions: 780 x 700 mm Approx. Onsite Dimension. (l x w x h): 5,000 x 1,800 x 2,100 mm, weight approx.: 6,600 kg

Inv. Num. : 7423 Type: ES 200/50 HL ST Producer: Engel Created: 1998 Parameters: Clamping force: 50 t Plate dimensions: 510x320 mm Injection weight: 4700 kg

B&A REF: 9024 TON: 160 SHOT WEIGHT: 343 SCREW DIAMETER: 50MM STROKE VOLUME: 3477CM3 INJECTION PRESSURE: 1892AR PLATEN SIZES: 710 X 660MM DBTB: 520 X 470MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 450MM MAX DAYLIGHT: 950MM EJECTOR STROKE: 150MM CONTROLS: MC6 CORE PULLING: 2 AIR CIRCUIT: 2 HEATING CAPACITY: 17.7KW ROBOT INTERFACE: EUROMAP 67 ROBOT: GIEGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONE

B&A REF: 9023 TON: 80 SHOT WEIGHT: 140 SCREW DIAMETER: 35MM STROKE VOLUME: 183CM3 INJECTION PRESSURE: 2429AR PLATEN SIZES: 560 X 510MM DBTB: 420 X 370MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 750MM EJECTOR STROKE: 150MM CONTROLS: MC 6 CORE PULLING: 2 AIR VALVES: 2 HEATING CAPACITY: 14.2W ROBOT INTERFACE: EUROMAO 67 ROBOT: GEIGER TECNOMATIC SCREW DRIVE: ELECTRIC HOT RUNNER: 12 ZONES

B&A REF: 9006 TON: 500 SHOT WEIGHT: 993 SCREW DIAMETER: 70MM STROKE VOLUME: 70CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 1280 X 1280MM DBTB:920 X 920 MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 950MM MOULD OPENING STROKE: 900MM MAX DAYLIGHT: 1850MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: EUROMAP HEATING CAPACITY: 37KW ROBOT INTERFACE: EUROMAP ACCUMULATED: 2

Description: Serial number 93307538 Clamping force 350 Ton, 3500 kN , Distance between the tie bars (HxV) 530 x 530 mm , Mould size 200 x 650 mm Diameter 70 mm Shot volume, calculated injection 990 cm3 Material pressure 1.980 bar Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Min/max mold thickness: 200 - 650 mm Dimensions 8010 x 1400 x 2480 mm Weight 14500kg Approx. Onsite Dimension. (l x w x h): 8,010 x 1,400 x 2,480 mm, weight approx.: 14,500 kg

ENGEL 2k 200 ton year 2009 x 2 units. Used for handles of toothbrush

Key data: 200000 kN, 72 g/PS, 30 mm

Clamping force: 200 t Year of construction: 2006 Injection weight in PS: 72 / 45 g Injection unit: .../150 / 150 Screw diameter: 30 / 25 mm Spec. Spray pressure: 2000 / 2500 bar Spray volume: 77 / 54 ccm Injection weight in PS: 72 / 45 g Clamping unit: 200/... Clamping force: 200 t Size of clamping plates: 795 x 795 mm Lights spar spacing: 570 x 570 mm Tool installation height: 300 mm Aperture travel: 650 mm Max. plate spacing: 950 mm Ejector travel: 225 mm General information: Delivery Time: Natychmiast Dimensions(m) LxWxH: 5.50 x 2.08 x 2.45 m Equipment: 3 x Hydraulic Core Pull 4 x Air Valve 2 x Thermoregulators Snail: upper/vertical 30 mm Bottom/Horizontal 25mm

Key data: 160 kN, 291 g/PS, 45 mm

Clamping force: 160 t Year of construction: 2006 Injection weight in PS: 291 g Control type: Selogica Injection unit: .../800 Screw diameter: 45 mm Spec. Spray pressure: 2470 bar Spray volume: 317 ccm Injection weight in PS: 291 g Clamping unit: 160/... Clamping force:: 160 t Lights spar spacing: 520 mm Aperture travel: 175 mm Max. plate spacing: 900 mm General information: Weight: 7000 kg Dimensions(m) LxWxH: 5.5 x 1.8 x 2.1 m Other equipment: 2 x Core Pulls

Key data: 200000 kN, 117 g/PS, 35 mm

Clamping force: 200 t Year of construction: 2001 Injection weight in PS: 117 g Control type: Selogica Injection unit: .../350 Screw diameter: 35/35 mm Spec. Spraying pressure: 2500/2500 bar Spraying volume: 127 ccm Injection weight in PS: 117 g Clamping unit: 200/... Clamping force: 200 t Lights spar spacing: 570 mm Aperture travel: 175 mm Max. plate spacing: 950 mm Ejector travel: 225 mm Other equipment: 2 x Core Pulls

Key data: 1000 kN, 6947 g/PS, 120 mm

Clamping force: 1000 t Year of construction: 2005 Injection weight in PS: 6947 g Control Type: Unilog B4 Injection unit: .../19000 Screw diameter: 120 mm Spraying volume: 7634 ccm Injection weight in PS: 6947 g Clamping unit: 10000/... Clamping force:: 1000 t Lights spar spacing: 1350 x 1350 mm Aperture travel: 1300 mm Max. plate spacing: 2350 mm Equipment: 2 x Hydraulic Core Wittmann Manipulator Conveyor belt Centering hole 250mm

Key data: 250000 kN, 690 g/PS, 60 mm

Clamping force: 250 t Year of construction: 2008 Injection weight in HP: 690 (hp) g Control Type: NC4 Injection unit: .../1450 Screw diameter: 60 mm Spec. Spray pressure: 1905 bar Spray volume: 763 ccm Injection weight in HP: 690 (hp) g Clamping unit: 250/... Clamping force:: 250 t Size of clamping plates: 950 x 950 mm Lights spar spacing: 630 x 630 mm Tool installation height: 330...710 mm Aperture travel: 450 mm Max. plate spacing: 1160 mm General information: Delivery Time: Dostępna Fuel tank capacity OIL: 700 l

Key data: 100000 kN, 149 g/PS, 35 mm

Clamping force: 100 t Year of construction: 2001 Injection weight in PS: 149 g Control Type: NC4 Injection unit: .../310 Screw diameter: 35 mm Spec. Injection pressure: 2020 bar Spray volume: 168.3 cc Injection weight in PS: 149 g Hydr. Drive power: 18.5 kW Cylinder heating capacity: 9.4 kW L/D screw ratio: 20 Clamping unit: 100/... Clamping force:: 100 t Size of clamping plates: 600 x 600 mm Lights spar spacing: 420 x 420 mm Ejector force: 41.2 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 220 l Weight: 4800 kg Dimensions(m) LxWxH: 4.3 x 1.4 x 2.0 m Equipment: 1 x Hydraulic Core 1 x Pneumatic Valve

Key data: 60000 kN, 18 g/PS, 15 mm

Clamping force: 60 t Year of construction: 2000 Injection weight in PS: 18 g Control type: Selogica Injection unit: .../150 Screw diameter: 15 mm Spec. Injection pressure: 2500 bar Spraying volume: 20 ccm Injection weight in PS: 18 g Clamping unit: 600/... Clamping force:: 60 t Size of clamping plates: 570 x 570 mm Lights spar spacing: 370 x 370 mm Tool installation height: 200 mm Aperture travel: 450 mm Max. plate spacing: 650 mm Ejector travel: 150 mm General information: Fuel tank capacity OIL: 150 l Weight: 3600 kg Dimensions(m) LxWxH: 4.0 x 1.2 x 2.1 m

Clamping force: 35 t Year of construction: 2006 Injection weight in PS: 30 g Control Type: NC4 Injection unit: .../80 Screw diameter: 22 mm Spec. Injection pressure: 2061 bar Spray volume: 34.2 cc Injection weight in PS: 30 g Hydr. Drive power: 7.5 kW Cylinder heating capacity: 5.1 kW Clamping unit: 350/... Clamping force:: 35 t Size of clamping plates: 460 x 450 mm Lights spar spacing: 280 x 280 mm Aperture travel: 350 mm Max. plate spacing: 530 mm Ejector travel: 100 mm General information: Delivery Time: Natychmiast Weight: 2750 kg Dimensions(m) LxWxH: 3.2 x 1.2 x 2.0 m Equipment Filling funnel Sorting flap bimetallic plasticizing structure hydraulic core on movable plate

Key data: 130000 kN, 194 g/PS, 45 mm

Clamping force: 130 t Year of construction: 1999 Injection weight in hp: 194 (hp) g Control type: Selogica Injection unit: .../350 Screw diameter: 45 mm Spec. Injection pressure: 1670 bar Spraying volume: 230 ccm Injection weight in hp: 194 (hp) g Hydr. Drive power: 22 kW L/D Screw Ratio: 18 Clamping unit: 1300/... Clamping force:: 130 t Size of clamping plates: 615 x 615 mm Lights spar spacing: 420 x 420 mm Ejector force: 40 kN Tool installation height: 250 mm Aperture travel: 500 mm Max. plate spacing: 750 mm Ejector travel: 175 mm General information: Fuel tank capacity OIL: 240 l Weight: 4100 kg Dimensions(m) LxWxH: 4.4 x 1.4 x 2.1 m

Description: Closing unit: , closing force 1000 kN, ,random force 50 kN Opening stroke 500 mm Mold mounting height 250 mm Distance between the clamping platens 750 mm Light column spacing 420 x 420 mm Ejector force 40 kN, ejector stroke ,175 mm Injection unit: screw diameter 35 mm, effective screw length 20 l/d, screw stroke 150 mm Stroke volume 144 cm³ Injection part weight 132 g Injection pressure 1820 bar Approx. Onsite Dimension. (l x w x h): 4,600 x 1,600 x 2,000 mm, weight approx.: 3,200 kg

Description: Closing unit: , closing force 350 kN, ,random force 32.5 kN, opening force 25 kN Opening stroke max. 350 mm Tool installation height 175 mm Distance between the clamping plates max. 525 mm Ejector force 30 kN, ejector travel ,125 mm Injection unit: screw diameter 30 mm, effective screw length 20 l/d, screw stroke 110 mm Stroke volume 78 cm³ Injection part weight 65 g Injection pressure 2200 bar Approx. Onsite Dimension. (l x w x h): 3,200 x 1,200 x 1,900 mm, weight approx.: 3,200 kg

Description: Umbaumöglichkeit horizontal/vertikal für Spritzeinheit Spannkraft 350 kN Approx. Onsite Dimension. (l x w x h): 2,700 x 1,500 x 2,500 mm, weight approx.: 1,800 kg

Description: Schließeinheit: Schließkraft 500 kN, Zufallskraft 32,5 kN Öffnungshub max. 350 mm Formeinbauhöhe 225 mm Abstand zwischen den Klemmplatten max. 575 mm Lichtsäulenabstand 320 x 320 mm Auswerferkraft 30 kN, Auswerferweg 125 mm Einspritzeinheit: Schneckendurchmesser 45 mm, effektive Schneckenlänge 18 l/d, Schneckenhub 145 mm Hubvolumen 230 cm³ Gewicht des Spritzteils 194 g Einspritzdruck 1600 bar Approx. Onsite Dimension. (l x w x h): 3,200 x 1,200 x 2,100 mm, weight approx.: 2,450 kg

Description: Closing unit: , closing force 350 kN, ,random force 32.5 kN, opening force 25 kN Opening stroke max. 350 mm Tool installation height 175 mm Distance between the clamping plates 525 mm Light column spacing 270 x 270 mm Ejector force 30 kN, ejector travel ,125 mm Injection unit: screw diameter 25 mm, effective screw length 24 l/d, screw stroke 110 mm Stroke volume 54 cm³ Injection part weight 45 g Injection pressure 2500 bar Including DÜRRSCHMIDT extraction unit ,EG-M, year 1999 Z-path 1000 mm, X-path 300 mm, Y-path 700 mm Approx. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 10,800 mm, weight approx.: 2,800 kg

Description: With 8 drawers  , Contents , Pillar and guide sleeves for tools, , Thread plugs, , Ejector rods, Mounting material, , Twist drill Approx. Onsite Dimension. (l x w x h): 710 x 700 x 1,000 mm, weight approx.: 380 kg

Key data: 2200 kN, 40 mm

Injection moulding machine ENGEL VICTORY VC 650-150 Tech Stock No.: 503440 Manufacturer: ENGEL Type: VC 650-150 Tech Control: CC100 Year of construction: 2005 Hours: 92467 h We are pleased to introduce you to our used ENGEL VICTORY VC 650-150 Tech injection moulding machine. This high-quality machine has a 40mm screw and a clamping force of 1500 kN. Perfect for precision injection molding in a wide range of applications. Please note the increased minimum installation height of 395mm. Technical Data Closing Page Clamping force: 1500 kN Panel size h x v: 750 x 750 mm Min. installation height: 395 mm Plate spacing max.: 995 mm Aperture travel: 600 mm Ejector stroke: 150 mm Ejection force: 61 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Tool weight: 1800 kg Technical Data Spray Side Screw diameter: 40 mm Displacement: 251 ccm Injection ...

Key data: 2200 kN, 535 g/PS, 55 mm

Injection moulding machine ENGEL Victory 1050-220 TECH Stock No.: 503439 Manufacturer: ENGEL Type: Victory 1050-220 TECH Control: CC100 Year of construction: 2006 Hours: 92465 h Technical Data Closing Page Clamping force: 2200 kN Plate size h x w: 860 x 830 mm Min. installation height: 300 mm Plate spacing max.: 1045 mm Aperture travel: 755 mm Ejector stroke: 180 mm Ejection force: 80 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 55 mm Displacement: 510 cc Spray pressure: 1615 bar Auger length: 20 l/d Auger stroke: 200 mm Screw speed: 230 min Plasticizing Current: 55 g/s PS Outdoor injection flow: 255 g/s hp Number of heating zones: 5 Nozzle travel: 350 mm Dimensions & Weight Machine dimensions LxWxH: 6.2m x 1.7m x 2.2m Total Weight: 12900KG Equipment CEE socket 16A Compact Flash  ...

Key data: 500 kN

Injection moulding machine Arburg 270 D 500-210 with control cabinet, functional, built in 1990, power 20kW, weight 1,850 kg, Clamping force 500 kn

Description:  , Series No. 166967 closing force ,850 kN max. approach force 37 kN max. opening force 37 kN max. opening travel 375 mm min. mold installation height ,250 mm max. platen distance 625 mm clear tie bar spacing 320 x 320 mm mold mounting platen 490 x 490 mm Injection unit screw diameter 30 mm max. screw travel 150 mm Approx. Onsite Dimension. (l x w x h): 4,300 x 1,900 x 2,000 mm, weight approx.: 2,700 kg

SANDRETTO series 8 612/95 Clamping force: 95 T Distance between tie rods: 370 x 370 mm Dim trays 560 x 560 Min / max mold thickness: 100 - 460 mm Opening stroke: 410 mm Injectable volume: 392 cm3 Material pressure: 1560 bars Screw diameter: 50 mm total installed power 34.8 kW Weight: 5700 kg Euromap 12 robot interface 2 aux cores (PF and PM) 3 socket table With magnetic plate (TECNOMAGNETE 2009) top dosage

Key data: 300 kN

LWB Steinl VCRS-T 300/36 T / machine like new Year of construction: 2006 Injection unit: Dosing volume: 36cc Clamping unit: Clamping force: 36 t Ejector: hydraulic Clamping unit: hydraulic Control: LWB ECO Additional equipment: Hydraulic core pull x 1 Control with air valve The injection unit was made of bimetal Metrics: Weight: 3000 kg All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 550 kN

Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of construction: 2016 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...

Key data: 900 kN

Boy 90 M Year of construction: 2004 Injection unit: Screw diameter: 42 mm Spray weight: 193 g Injection pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tie bar spacing: 430x360 mm Size of clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 1 Metrics: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 550 kN

Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of construction: 2017 Injection unit: Screw diameter: 38 mm Spray weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Tie bar spacing: 360x335 mm Size of clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Controls: Procan Alpha - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Injection unit hardened - Bimetal The machine was regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All off ...

Key data: 350 kN

Boy 35A VV Year of construction: 2005 Injection unit: Screw diameter: 28 mm Spray weight: 55.8 g Spray pressure: 1577 bar Dosing volume: 58.5 ccm Clamping unit: Clamping force: 35 t Tie bar spacing: 280x254 mm Size of clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan CT - Touchscreen Additional equipment: Euromap 12 Robot Interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Metrics: Weight: 1350 kg Length/Width/Height: 2.06x0.95x2.74 m Drive: Pumps/motor: 7.5 kW Heating capacity: 5.8 kW Total power: 13.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Key data: 220 kN

Boy 22M / Machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 28 mm Spray weight: 47 g Spray pressure: 1069 bar Dosing volume: 49 ccm Clamping unit: Clamping force: 22 t Tie bar spacing: 254 mm Size of clamping plates: 220x400 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan MD - Touchscreen Additional equipment: Machine in very good technical condition Air valve x 1 Injection unit hardened - Bimetal Operating hours: 34,000 in automatic mode Metrics: Weight: 820 kg Length/Width/Height: 2.28x0.81x1.62 m Drive: Pumps/motor: 5.5 kW Heating capacity: 5.8 kW Total power: 11.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our comp ...

Key data: 1100 kN

Demag Ergotech Multi 1100-310H/80V / Production line with the Wittmann-Demag W721 robot / Very good technical condition Year of construction: 2007 Injection unit: Screw diameter: 40 mm Spray weight: 195 g Spray pressure: 1550 bar Dosing volume: 219.8 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Size of clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Production line with turntable, Wittmann-Demag W721 robot, conveyor belt and protective housing 2K Machine Air Valve x 4 Hydraulic Core Pull x 2 Injection unit hardened - Bimetal Screw diameter in vertical injection unit: fi 22 mm Parallel Movements Original turntable Robot Wittmann-Demag W721 Year of construction: 2007 4-axis robots: 4 axes are driven by servo motors (electric); Axis C - pneumatic Travels in axes: X-550, Y-1 ...

Key data: 800 kN

Demag Ergotech Compact 800/420-200 Year of construction: 2000 Injection unit: Screw diameter: 30 mm Spray weight: 94 g Injection pressure: 1990 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 400x400 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Machine in very good technical condition Euromap 12 Robot Interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine was not in use in an ongoing production. This was only used to test the tools It is possible to change the screw diameter Metrics: Weight: 4000 kg Length/Width/Height: 3.90x1.40x1.90 m Drive: Pumps/motor: 18.5 kW Heating capacity: 7.5 kW Total power: 26 kW All offered machines are started by our service technicians before they are sold. It is possible to  ...

Key data: 800 kN

Demag Ergotech System 80/420-430 Year of construction: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Size of clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot Interface Air valve x 2 Hydraulic Core Pull x 3 Control with hot runners Injection unit hardened - Bimetal Built-in printer It is possible to change the screw diameter Metrics: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request