plastic mold injection used for sale

Description: Serial number: 42169, Own weight: 7,000 kg Injection unit: Screw diameter: 80 mm, metering stroke: 310 mm, max. stroke volume: 1,558 cm³, screw speed: 183 rpm, standard screw length: 20 L/D, plasticizing capacity: 90 g/s, injection flow: 478 cm³/s, specific injection pressure: 1,400 bar, specific injection pressure increased: 1. 640 bar, nozzle stroke: 650 mm, nozzle pressing force: 110 kN, heating power: 34 kW, number of heating zones including nozzle: 5, pump drive power: 55 kW, oil filling main tank: 1,000 l, oil filling suction tank: 850 l, weight of injection unit: 7 t Clamping unit: Clamping force 6,000 kN, opening force: 300 kN, moving cylinder force: 150 kN, opening stroke: 1,200 mm, mold installation height min. 800 mm, platen distance max. 2,000 mm, platen size HOR.X.WERT. 1,580 x 1,300 mm, ejector stroke: 250 mm, ejector force: 110 kN, weight of clamping unit: 4 ...

Injection unit: Type F75E Screw ø 36 mm Injection volume (max.) 147 cm³ Spraying speed (max.) 153 cm³/s Injection pressure (max.) 1,920 bar Holding pressure (max.) 1,720 bar Clamping unit: Clamping force (max.) 980 kN Travel 360 mm Tool size (min./max.) 150/510 mm Clear width tie rods 460 x 460 mm Die plate size 630 x 630 mm Equipment/Accessories: Automation Robot Interface EUROMAP 67 Other Interfaces Paint Dosing Unit, Cooling Unit

B&A REF: 9027 TON: 110TON SHOT WEIGHT: 210 SCREW DIAMETER: 40MM STROKE VOLUME: 235CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 680 x 650MM DBTB: 450 X 400MM MIN MOULD HEIGHT: 150MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 410MM MAX DAYLIGHT: 910MM EJECTOR STROKE: 150MM CONTROLS: DIMI EL 2000 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9.3KW SCREW DRIVE: HYDRAULIC

B&A REF: 8827 TON: 120 SHOT WEIGHT: 211 SCREW DIAMETER: 40MM STROKE VOLUME: 232CM3 INJECTION PRESSURE: 1710AR PLATEN SIZES: 770 X 730MM DBTB: 480 X 440MM MIN MOULD HEIGHT: 300MM MOULD OPENING STROKE: 500MM MAX DAYLIGHT: 800MM EJECTOR STROKE: 125MM CONTROLS: ORION CORE PULLING: 1 AIR VALVES: 1 MOTOR: 15 HEATING CAPACITY: 9.3KW SCREW DRIVE: HYDRAULIC

B&A REF: 9001 TON: 160 SHOT WEIGHT: 260 SCREW DIAMETER: 40MM STROKE VOLUME: 285CM3 INJECTION PRESSURE: 2100AR PLATEN SIZES: 780 X 740MM DBTB: 510 X 450MM MIN MOULD HEIGHT: 170MM MAX MOULD HEIGHT: 550MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 1010MM EJECTOR STROKE: 200MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 1 AIR VALVES: 1 MOTOR: 19 HEATING CAPACITY: 12KW SCREW DRIVE: HYDRAULIC

B&A REF: 9017 TON: 180 SHOT WEIGHT: 360 SCREW DIAMETER: 50MM STROKE VOLUME: 392CM3 INJECTION PRESSURE: 2000AR PLATEN SIZES: 760 X 760MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 600MM MOULD OPENING STROKE: 460MM MAX DAYLIGHT: 1060MM EJECTOR STROKE: 150MM CONTROLS: CC 200 AIR VALVES: 1 HEATING CAPACITY: 15.3KW ROBOT INTERFACE: EUROMAP 67

Description: Injection unit: Screw diameter: 50 mm Shot weight: 343 G Stroke volume: 377 CCM cm³ Injection pressure: 1892 bar Plastification rate: 35 G/S Screw speed: 255 1/min Closing unit: Closing force: 1500 KN max. opening daylight: 1000 mm Bar spacing: 500 X 500 mm min. molding height: 400 mm Tool mounting platens: 780 X 790 mm Approx. Onsite Dimension. (l x w x h): 4,600 x 1,700 x 2,200 mm, weight approx.: 6,500 kg

ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...

Technical data: 2 stations wind moulding machine, extrusion PE 90 mm, 50 points Moog Programmer, control Geforn 186-th wind volumes max. 5,000 cubic centimetres

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

ENGEL electric 280 ton year `2006. -Model : e-motion 740/280 -Clamping force : 280 ton -Screw diameer 45mm -Manufactured year : 2006

Technical data: Motor power: 0,75 kW Voltage: 220 V / 50 Hz Machine width: 900 mm Machine height: 1150 mm Machine length: 750 mm Weight: 135 kg Year of construction: 1996; ready for use

IMPCO used blow molding machines -Model : BD30 -Screw diameter : 100mm -Manufactured year `1997 & 2000 -Quantity : 2 units Produce 5 gallon (20 liter) PC bottles

Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000

3 series of molds 0.5--1.0--1.5 lt SIDEL SBO 8 Series 2

PS, K-Resin Lid Mold for the ILLIG RDM 58/ 3, dia. 120 mm, 8 Cavity, together with associated stacker Parts

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2004, Siemens S7-400, capacity 2.0L 16000 bph - 0.5L 21500 bph, moulds potentially included 0.5 L + 2.0 L, round Petaloid base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 28 / 1810, operating hours 72958, production hours 34191. Service by Sidel and own technicians. Condition reasonable/good. With: Sidel pre-form hopper, pre-form tipper, various pneumatic conveyors Rafael/Compere, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date June 2019. Available now.

1 of used blowmolder, make SIDEL, type SBO 14 SERIES 2, new 2001, Siemens S7-400, capacity 0.5L 21500 bph, moulds potentially included 0.5 L squarround champagne base, quick-change for GUPM shell moulds, maximum bottle size 2.5 L, oven type linear, number of heating modules 14, preform neck 30/25. Service by Sidel and own technicians. Condition reasonable - oven chain incomplete, cam-card removed but new available with spares. With: Sidel pre-form hopper, pre-form tipper, various Ling Systems pneumatic conveyors, some OEM spare parts. No water chiller, no hi-pressure compressor. Last production date March 2019. Available now.

Mold Measured Spoon (baby food), 12 sockets out of 16 work

The foam molding line was in working order. Not used for several years

The foam molding line was in working order. Not used for several years

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

Clamping plates: 850 x 1250 mm - Fastening of the tools via T-slots Stroke of the upper Clamping plate: 400 mm max. Opening width: 800 mm max. Tool installation height: 400 mm min. Table height: 1080 mm Clamping force: 400 kN Opening force: 480 kN Beam angle: 85° top plate Tilt range Frame: From 0° to 90°, hydraulic Plate rotation range: From -90° to +90°, manual Travel cylinder: 1 PARKER travel cylinder Force elements: 2 power elements with clamping jaws, mounted at the front Mould weight above: approx. 400 kg max. Total mould weight: approx. 1000 kg max. Valve Control: Black/White Valves for Travel Cylinders and Power Elements Core Pull Control: Without Core Pulls Hydraulic power unit: H-L 55/22 - Operating pressure max. 250 bar Control: Without control Dimensions: Mould carrier: approx. 1,600 x 1,400 x 2,000 mm (width x depth x height) Weight: appr ...

SIDEL SBO 12 serie 2 blow-moulding machine for 12 moulds. Personalization for preform neck PCO 28. The manufacturing year is 2002 and the capacity is 15.000 BPH. Machine equipped with : - Preforms tipper & hopper - Electrical cabinet - Sidel control panel The machine is no more in production and is already professionally dismantled. The machine is in good condition. If you are interested by this machine, you can contact us by mail for further information and discuss about the availability.

Various used blow molds in great condition Size: Up to 1 liter 1-2 compartment cavity Various used blow molds in super condition Size: Up to 1 liter 1-2 compartment cavity

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2001 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Blowing machine SIDEL SBO 14 Universal year of manufacturing: 2007 neck type: 38 mm widemouth capacity: 25.200 bph incl. preform feeding system without chiller and moulds

Blow mold for carafe, 10 liters (Flask).

A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available.

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The four-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the workpiece front and rear edge above and below -4x engines Perske -Power: 1.5 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Weight: 374 kg

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the front and rear edge of the workpiece and on top -each 2x corner copying units -2x engines Perske -Power: 0.3 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Dimensions: 650/4500/H700 mm -Weight: 86 kg

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -The two-motor HOMAG profile milling units ensure corner rounding even when processing veneer -for rounding edges on the front and rear edges of the workpiece and at the bottom -each 2x corner copying units -2x engines Perske -Power: 0.3 KW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18000 rpm -Dimensions: 780/470/H340 mm -Weight: 52 kg

Shaped part edge banding machine, edge banding machine, edge banding machine -Workpiece thickness: 10- 85 mm -Fan heater: 6 kW pre-coated edges -Cut knife -edge plate -Transport dimensions: 900/700/H1080 mm -Weight: 135kg

Mold heating, fan heaters, heating, gas heating, construction heating, construction dryers, heating, hall heating, gas heating for casting molds, foundry technology -Manufacturer: Junker, gas heating WA 26532 on a mobile transport frame -Burner: Wiedemann B202 H2-3 175 kW -Blower: Spelleken 5.5 kW volume flow 500 m³/h -Individual components/accessories: see photos -Dimensions 1500/1250/H2010 mm -Weight 625 kg

Praline forming machine, praline shaper, -Conveyor belt missing -Chocolate forming machine -Execution: stable -Conveyor belt width: 110 mm -2x press rollers: Ø 145 mm -1x molded body: with ejection -1x machine with shape ellipse: approx. 20 x 35 mm -Transport dimensions: 1540/520/H1420 mm -Weight: 280 kg

Ice Press, Shaper, Spaghetti Ice Press, Ice Press Cup -made of stainless steel tube: Ø 79 mm -Shape: Spaghetti 51 pieces available -Holes: Ø 3 mm -Form: wide nude, tagliatelle, lasagna, 27 pieces available -Slit: 4 x 49 mm -Price: per piece -External dimensions: 160/79/H78 mm

Blowing machine lower: KOSME KSB 4000 YOM: 2003 Capacity: 4000 bph The unit consist of: •Preform infeed and orientation device •Blow molder KSB 4000 •Bottle discharge with air conveyor •Compressor with booster and puffer tank •Cooler M.T.A •3 set of molds

Manufactured: SIDEL SBO 16/20 Universal Eco2 Predis ultra clean YOM: 2011 Nominal capacity: 32.000 bph Current capacity: 25.600 bph in 2.0 L rect. Number of molds: 16 Equipped: with Sidel ARS air recycling system Neck personalization: 38 mm Unit complete with: •Preform tipper, hopper and feeder •Preform disinfection •Sidel ultra clean Predis

Used biscuit moulding machine with various shapes made by Elcal from Biała Rawska.

Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods

Make: Kosme Type: KSB 4000 Year of construction: 2003 Capacity: approx. 4,000 bpm - incl. preform feeder - incl. compressor - incl. cooling - incl. 3 sets of blow moulds - Bottle outlet with air transport Only a few operating hours!

SMi SR 10 Used Blow Molding Machine 2010 The SMI SR 10 Used Blow Molding Machine 2010 is a high quality machine manufactured by SMI This machine is designed to create containers made from PET material and comes in three different formats 0 50 L 1 0 L and 1 5 L The model number of this machine is SR 10 and it was produced in the year 2010 The SMI SR 10 has a speed of 15000 bottles per hour making it an ideal choice for businesses looking for a fast and efficient production process This machine comes equipped with ten cavities allowing for the creation of multiple containers simultaneously It also includes a preform loader preforms tipper and performs unscrambler which work together to ensure that the preforms are loaded and positioned correctly for the blow moulding process Is there annexe equipment The SMI SR 10 Used Blow Molding Machine 2010 does not come equipped with a compressor or c ...

Used Blow Moulding Machine Sidel SBO6 2 Year 2005 9000 bph The machinery has been disconnected from the functioning production The PLC is present and its functionality is ensured The machinery as a whole is in a good state of maintenance pre production maintenance is still recommended because the blow molding machine has been in storage for about 12 months Transport is a large load therefore outside the normal gauge We can supply all necessary spare parts for this blow molding machine [...for more information send your inquiry to the seller.] refno: SO81

Used Blow Moulding Machine SIAPI EA20 120 2 Year 2004 1800 Bph AUTOMATIC BLOWER SIAPI EA20 120 2 2 CAVITA 2004 suitable for blowing PET bottles up to lt 5 from preforms complete with Automatic preform feeder Automatic preform orientator Machine electrical panel Mold and chiller excluded Production 1 800 bph Machine protections working Manuals available Working hours 25 000 Currently stopped in stock Neck type PCO 1810 neck 32 neck 30 25 Air recovery system present [...for more information send your inquiry to the seller.] refno: SO76

Used Stretch blow molding machine SIDE linear SBM speed 2000 BPH Manufacturer and year SIDE Spain 2002 Mold 8 5 L with 2 cavities square Can blow preforms for 3 5 6 8 liters with a neck size of 48 mm Has hopper No compressor or cooler are offered The machine is in good condition and regularly maintained Dimensions width 2245 mm length 3600 mm height 2060 mm Space required for the Used Stretch blow molding machine The blower itself needs about 20 m2 and the rest depends on what equipment you will get compressor cooler The blower power is 80 kW High pressure required Max 40 bar air 300m3 h otherwise it worked with 32 33 bars Low pressure 6 10 bar 100m3 h The refrigerator should be cooled to 6 10 C at a pressure of 3 5 bar Technical documentation is available Spare parts are available Stopped working 2 years ago but can be seen in operation [...for more information send your inquiry to the  ...

Used PET Blower Siapi 2004 type EASP 20 Italy This is a complete blow molding machine which was not in use for the last 3 years Blower speed 2 500 bph for 2 L bottles The machine has 2 cavities for neck sizes 28 38 mm This Siapi Blower can be tested with a dry run Weight blower 5 000 kg elevator 250 kg positioner 250 kg All the necessary technical documentation for this machine is available Required installed power 120 kW Compressor Tempo Tehnika 350 2004 Specs 1100 rpm 75 kW 42 bar Dehumidifier Bode du 37 type 309 2006 Compressed air tank 1 000 L Compressor cooler MTA rwd 150 2004 Machine cooler Euri chiller gc 2004 The compressor is included in this PET blow molding machine or it can be bought separately Air transport cca 100m Europool Italy For bottles with a neck 28 and 38 mm This blow molding machine complete with compressor and air conveyors is in excellent condition [...for more i ...

Used Smiform SR12 Blow Molding Machine 2003 SMIFORM SR 12 CAVITY Constructed in 2003 but totally overhauled in 2018 and used very little It is in excellent condition Preform loader and tipper included Air conveyors included It does NOT come with a compressor [...for more information send your inquiry to the seller.] refno: SO91