plastic injection moulding used for sale

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

Description Item # 9231 - CROISSANT/ CAKE INJECTION FILLING MACHINE Manufactured by GORRERI Model SVG800 - 800mm working width For fillings such as: creams, jams, fruit jelly Two sets of needles : for big croissants/cakes: for mini croissants/cakes Year 2007 (used in production for 2 1/2 years and then held as a back-up machine) Production capacity: 20 cycles/min Weight: 750 kg Power: 7.5 kW Feeding tension: 380 V (3Ph+T+N) Auxiliary tension: 24 V DC Frequency: 50 Hz Working pressure: 6 bar

New injection pump 0402 066 725(=PES6P110A120RS3336-1) NET 2.950,-EURO 6 x new injectors 0432 191 342 (Cummins # 408931500) net / piece 215,-EURO Mail: info@miw-zeven

APV COMBI UHT TREATMENT STERILIZATION PASTEURIZATION PLANT – 2006 Includes both TUBULAR and INJECTION systems. Capacity 4.000 - 8.000 Lt /h DISASSEMBLED AND READY FOR LOADING - APV PLATE HEAT EXCHANGER for cooling - APV TUBULAR ( INDIRECT ) UHT Treatment system. - APV INJECTION ( DIRECT STEAM ) UHT Treatment system. - APV ASEPTIC HOMOGENIZER 250 BAR - OPTIONAL - APV CIP CLEANING UNIT - APV VALVE CLUSTER FOR ASEPTIC TANK - (TANK IS EXCLUDED) - ELECTRIC CONTROL PANELS Fast heating (~300°C/sec) for optimal taste and minimal degradation Instantaneous flash cooling for flavor and aroma preservation Uniform heating via indirect tubular exchangers for gentle thermal treatment High energy recovery (up to 90%) to reduce utility consumption and cost. Precise thermal control with uniform product treatment Efficient spore kill with very low C ...

complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition

Used Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Condition: As Is Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Model: DYNABLOW DB 30 Speed: 3.000 Bph Number of cavities: 3 Type: Linear Compressor NOT included Chiller NOT included Safety protections Code: W 90 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Condition: As Is Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Speed: 16.000 bph Model: sbo 16/16 Number of cavities: 16 Preform tipper Preform orienter Safety protections Code: W 77 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel Sbo 6: Year: 2002 Condition: As Is Used Blow Moulding Machine Sidel Sbo 6 Year: 2002 Speed: 10.000 bph Number of cavities: 6 Chiller not included Compressor not included Preform unscrambler Preform elevator Preform tipper Safety protections Code: W 89 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa Sfr 16: Year: 2001 Condition: As Is Used Blow Moulding Machine Sipa Sfr 16 : Year: 2001 Model: sfr 16 Speed: 18.000 bph on 1.5 lt 22.000 bph on 0.5 lt Number of cavities: 16 Preform elevator Preform orientator Safety protections Code: W 79 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Condition: As Is Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Speed: 4.000 bph Model: sf-08004 Number of cavities: 4 Type: linear Preform tipper Preform hopper Bottle formats: 1.5 lt Safety protections Code: W 86 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Condition: As Is Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Speed: 7.200 bph sul 1.5 l Model: sbo 6/10 serie 1 Number of cavities: 6 Bottle neck format 29/25 mm Preform elevator/orientator Stamp not included Worked hours: 47.000 Safety protections Code: W 84 More details: https://bottlingscout.com

Used Used Blow Moulding Machine Sipa sf 8/4: Year: 1998 Condition: As Is Used Blow Moulding Machine Sipa sf 8/4: Year: 1998. Speed: 4.000 bph. Model: sf 8/4. 4 cavities. Format available: 0.5 lt ? 1.5 lt ? 2.0 lt. Preform loader. Preform tipper. Complete with air recovery system. Safety protections. Code: W 14 More details: https://bottlingscout.com

Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 122 More details: https://bottlingscout.com

Used Used Kosme PET Blow Moulding Machine: Year: 2005 Condition: As Is Model: KSB4L Year: 2005 Speed: 6,000 BPH 1L format Type: linear 4 cavities Preform elevator and orientator Bottle neck 29/21 Safety protection Code: W 124 More details: https://bottlingscout.com

Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 123 More details: https://bottlingscout.com

Description CHOCOLATE BISCUIT MOULDING LINE Manufactured by CARLE MONTANARI Model Multicavemill 1200 Mould dimensions 1110mm x 285mm. Approximately 1200 moulds on the chain. year 1993 including biscuit infeed conveyor with incline and overhead distribution incorporating 180deg turns Demoulding Station, twist action Mould Change System with product detection Mould Conditioning prior to deposit Model MLR 1200 Chocolate Depositor Shaker/Vibrator Biscuit Depositor / Placing System and Presser Backing Off System and Shaker/vibrator Cooling Chamber The line has a REISDORF ASM-1200 Wide Target Sprinkler for sprinkling ingredients on products Allen Bradley Controls 415volt 3phase 50hz Includes 2 x AASTED AMT-2000 Chocolate Tempering Machines, both from Year 1993, and access platform/gantry Line length 35.2m x 4m high at maximum (depositor section) No moulds are included.

Description Item # 9286 - CHOCOLATE SHELL MOULDING LINE used for filled pralines, eggs, balls, etc Manufactured by BINDLER Model HA/M - 275 year 1994 mould size 275mm x 220mm x 30mm design speed 5 moulds per minute upgraded to 7 per minute +/- single forms 162 moulds double forms halves 238 moulds working height 900mm total length 20m x width 3.1m 1 operator to run the line still installed and in excellent working condition, last run in 2024 process: - one magazine for empty mould removal - one magazine for empty mould loading - 1st mould heater pre-deposit - shell depositor model GKC - GWK Teco CS 140e water heater fitted for fast and continuous hopper and depositor plate heating/ pre-heating - mould turn over device with automatic chocolate recovery hopper - water heater fitted - and recirculation pump (to connect to either temperer or holding tank, not included) - mould vibration - 1s ...

Description Item # 9308 - ONE SHOT CHOCOLATE MOULDING LINE Manufactured by WESTAL 600mms wide Line Year of Manufacture not known (approximately 35 years old) Still set up in the factory, in full working order Up to 500Kgs per hour (around 4000Kgs per 8 hour shift), depending on product Line holds 420 moulds capacity up to about 25 moulds per minute, depending on product Including One Shot Depositor which was only being used for solid bars Could also include some types of inclusions Line with : Mould Warmer, automatic rising up from line when not being used One Shot Depositing head, last being used for solid bars Mould Vibration Mould Cooling, snake style through line Cooling by cold air, cooling fan included, cooling compressor also available if required (on outside of building) Mould Turnover & Mould De-Moulding, with hammer Product Exit Mould Return to start of line Line has had a New  ...

Description Item # 9326 - ONE SHOT CHOCOLATE MOULDING LINE Suitable for Solid, Filled, One Shot & Book Moulded Products Line includes: MESIMERIS METAL CONSTRUCTIONS (Greece) Universal Refiner/Conche, 1500Kgs, Year 2004, LLOVERAS AAC-502 Chocolate Tempering Machine, Year 1998, 500Kgs, with Pump. Motor Screw Shell overhaul in 2022. 300Kgs Stainless Steel Buffer Tank, Double Jacketted with water. AWEMA UDM222 One Shot Depositor, Year 2007, around 10 moulds per minute, up to 1600Kgs per 8 hour shift. Line is all year 2004, and includes: Preheating mould section(A1) with plastic belt, Tower control unit. Pusher for the 90 degrees angle, 5 meters long belt that drives near the head. Here can be added decoration robots (not available) or other equipment. Pusher that brings 2 by 2 the moulds and places to the belt of head. The head of the machine with the control panel (touchscreen or mouse cont ...

Used Used Krones PET Blow Moulding machine Contiform S8: Year: 2004 Condition: As Is Used Krones PET Blow Moulding machine Contiform S8: Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety Protections Code: W 105 More details: https://bottlingscout.com

Bread maker and rolling pin maker Dimensions: 88x88x120 Voltage: 220-400 V Electric power: 0,55 kW Dough weight: 20-1000g

200ton Downstroke Moulding Press Manuf.: R+S Technik Platens: 1500 mm deep x 2000 mm wide Daylight 1000 mm Press force 2000kN Tearing force 120kN Operating voltage 3x230/400V, AC, 50Hz Installed power 197kW Max. weight of tool 5000kg Max. pressure of hydraulic 250bar Length of stroke 1670mm Weight: 37000kg Year 2016

This 6-axis REIGNMAC 520 Moulding Master was manufactured in 2016. It features a working width of 20–200 mm and a working thickness of 8–120 mm, with a feed speed of 6–24 m/min. The machine is equipped with six spindles, with a spindle speed of 6000 rpm and a maximum tool diameter of Ø145 mm. If you are looking to get high-quality woodworking capabilities, consider the REIGNMAC 520 Moulding Master machine we have for sale. Contact us for further details.

Used injection molding tools for the manufacture of plastic slippers. Offer total 43 pcs. refers to two cavities tooling and accessories. From small children (23) to men (45) in size, it is suitable for the manufacture of slippers of various types and colors. For sale total 12,900 Euro

Plastic sheets, plastic laminate -various sizes -Thickness: 6 mm -Outdoor outdoor area: usable -on: 2 pallets -Sale: only complete set -Dimensions: 1450/3100/H340 mm -Weight: 720 kg

Installation: Indoors, material: PE100, internal dimensions X/Y: 1900mm/2200mm, internal drip tray dimensions X/Y: 2100mm/2000mm, useful volume: 6000l, liquid: HCl/Fe3Cl/H2O, density: 1.15kg/dm³, pressure: unpressurized. On-site inspection is possible.

Average throughput rate abt.500 kg/h depending on feeding rate 30 kW.drive, 400 V 50 Hz Granulating chamber mm.600 x700 Knives length 600 mm. Rotor length 600 mm. diam.500 mm. N.3 x 2 in line rotating knives N.2 still knives (micro-adjustable) Grid holes 12 mm (or on request) Extraction vent 1,5 Hp+ piping + cyclon + dust sleeves Manual hydraulic pump for hopper opening Water cooling system in the granulation body Electric cabinet User’s manuals drawings, CE compliance Soundproof cased

P490 - 2x used approx. 57.5 m³ / 57,500 litre HDPE tank, single-walled, lying on plinths, water tank. Technical details: Content: approx. 57.5 m³ / 57,500 litres Material: PEHD Manufacturer: Wijtmans Plastics Roosendaal Year of Make: 2014 Specific gravity: min. 1.1 kg/L Dimensions: approx. Ø 2.65 m / H total 3.00 m × L 13.00 m Other: Used HDPE tank, cleaned and in good condition. Horizontal plastic tank on 6 bases, dome on the top, several inlets and outlets. At the bottom and top of the front a spout approx. DN100 and at the very top of the tank body a spout approx. DN120. Former water tank. Only the pure tank is sold, without attachments such as pipes, fittings and accessories. The tank can be used as a storage tank for many different media such as water, liquid feed, whey, etc. or as a rainwater collection tank. Price on request. Transport can be organised  ...

PET BLOW MOLDING - MAG PLASTIC - Blow molding solution for PET bottles Year: 1994 Type: SSB 40 Input voltage: balanced three-phase 400 V Frequency: 50 or 60 Hz +- 5% Total installed power: 86 kW (Option 102 kW) Weight: Approx. 5,000 kg Number of molds: 4 Clamping force: 250 KN Total opening stroke: 120 mm

Plant complete with all the machinery and molds to produce plastic pots, saucers, cages and thermoformed pot holders of various types and sizes: from 40 cm. up to 1 m. Composed of: N1) 135 ton SANDRETTO plastic injection press N1) 135 ton SANDRETTO plastic injection press N1) 200 ton SANDRETTO plastic injection press N1) 300 ton SANDRETTO plastic injection press N1) 400 ton SANDRETTO plastic injection press N1) 5 pallets CAMPETELLA robot + labeller N1) 7 pallets CAMPETELLA robot + labeller N3) automatic stacking and coding lines N2) mold cabinets with drawers with a capacity of 1000 kg N1) refrigerator to cool water N1) freecooler to cool the oil N59) molds for flower pots

For sale TWO (2) complete lines for plastic caps with molds, include: (2 pcs) CCM001 SACMI LINES with moulds for HL3 cap (Coca Cola approved high cap with Liner) Condition: Fair condition. Were Working at moment of disconnection in 2015. Origin Italy. Exworks South America 380volts 50Hz Huge Lot of Sacmi genuine spare parts.

range L-W-H: 490x310x190 mm weight max. in kg: 20 kg Temperature range: -10° +50° °C Colour: grün RAL material: PST AU Lot storage stackable by lateral and rear tongue and groove can be connected to each other approx ca. 700 pieces in Stock Packing unit: Pallet Exception, for small quantities only if you pick them up yourself in Goldenstedt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 used pallet box Make: Purus Plastics Type: Fidus Vario Box 1208 Material: PP Overall dimensions: approx. 1,200 x 800 x 975 mm with 4 module attachments pluggable Height 200 mm each Weight: approx. 50 kg Static load: 4,000 kg Dynamic load: 1,600 kg Load high rack: 1,000 kg In total, there are about 100 pieces for sale. Price per piece: EUR 150,00 / net VAT invoice. Conditions: Self-collection by telephone arrangement from location 53783 Eitorf. Pick-up times: Mon-Thu: 09.00 a.m. - 05.00 p.m. Friday: 09.00 am - 01.00 pm Shipping by forwarding agent possible. The shipping costs are borne by the recipient. An offer is made after specifying the postal code.

Blown film line especially for PP processing length: 6,300 mm width: 2,500 mm height: 4,200 mm Weight: 3.700 kg blowing capacity: 65 kg/hod. Film Thicknes: 0.015 – 0.1mm film width: 250 – 650mm Die- diameter 65 mm Winding speed: 5 – 60m/min. Power consumption: 72 kW

This material filler is equipped with a 1 kW electric motor. It can suck 2 kinds of materials into its large tank. The mounted controller can also regulate the ratio of materials. There are several of them. Other fillers, dyes and other machines are also for sale. Please see my other ads.

PET Blow Moulding Machine - MAG PLASTIC The ideal blowing solution for PET bottles Year : 1994 Type : SSB 40 Input voltage : three-phase 400 V Frequency : 50 or 60 Hz ± 5% Total installed power : 86 kW (Option 102 kW) Weight: Approximately 5000 kg Number of molds: 4 Clamping force : 250 KN Total opening stroke : 120 mm

This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information.

General SKU379X949 LocationBarneveld CEcheck MakePlastic Systems Main Features MaterialAluminium/Stainless steel Volume30 Ltr. Motor1 KW Specified Features - Miscellaneous dryer Dryer(compressed-air desiccant dryer) Capacity30 l. MaterialStainless steel With jacketcheck General TypeDAC 30 No.DAC001-07 Year of construction2006 Extra SpecificationsHopper capacity: 30 dm³ (≈ 30 L) Process air flow: 7–20 Nm³/h Process temperature range: 50–150 °C Heating power: 0.95 kW Total installed power: 1.0 kW Energy consumption at 80 °C: 0.11–0.29 kW (listed range) Compressed air (process) flow: 6–16 Nm³/h Compressed air (regeneration) flow: 4 Nm³/h Total max compressed air flow: 20 Nm³/h Required compressed air pressure: 6–8 bar (oil- and water-free) &:nbsp:Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine che ...

Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos -Quantity: 1 device available -Dimensions: 530/520/H1120 mm -Weight: 56 kg

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

PLASTICSERT 100 PLASTICSERT 100 MAILBAG is an automatic vertical bagging machine ideal for magazines, reports, catalogues and publications. Year 2008. The bag sealer machine works with a film reel mounted on a motorised roller. An adaptor folds the film and forms a closed bag containing the products. At the end of the process the product is automatically ejected. -Digital control panel -Booklet length self-adjustment with photocell -Independent hot wire sealing bars -Cutting temperature electronic control -Built-in piece counter -Automatic drive of the product that needs to be packaged -Wide support surface Product width: from 160 to 250 mms. Lenght: from 100 to 360 mms. Thickness up to 15 mms. Speed: 20 pieces/min.

DL-2400 THREE LAYER CASTING MACHINE SINGLE EXTRUDER CASTING MACHINE

Box Width:750 Box Height:1000 dimensions of the machine ca.:1200 m2 Powder Coating Line EISEMANN very less used and in very good condition. New Price of the plant 2.600.000,- EURO Power & Free conveyor system with 250 car trains, 5-Zone Spray Pre-Treatment System, stainless steel - water drying cooling zones. 2 nos.of WAGNER stainless steel powder cabins each with ABB robots & double-automatic powder guns, as well aseach cabin is equipped with a hand-powder device. Powder Curing Oven, direct gas heated three-zone Spray cleaning equipment, Stainless Steel - Sewage Treatment Plant, Evaporator with Reverse Osmosis System & Fresh-Air Device. Opening Cross Section Areal: Width 750 mm, Height 1000 mm Technical Details: Pretreatment conveying speed 2.3 m / min. Pretreatment surface area approx. 200 m2 / h. Painting Surface approx. 120 m2 / h. Throughput of workpieces approx. 4,000 k This Powede ...

Auction-ID: A1-49846-123