plasma machine used for sale

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 28370 € : 1500x3000 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : 1/10 mm : 630 l : 400 kg/m² : 3560 mm : 1960 mm : 1500 mm : 650 kg Druckluft betriebene Plasmaquelle HYPERTHERM Powermax 45 XP CNC-Workbench Software (externer PC nicht inkludiert) Einstellbare Laufrollen Präzisions-Profilschienenführung (HiWin) Spielfreier HTD-Zahnriemen Antrieb über Schrittmotoren Stabile Rahmenkonstruktion Einzeln erneuerbarer Auflagerost Wasserwanne als Funkenfang Schwimmende Brennerlagerung in Verbindung mit austauschbaren Gleitschrauben, sorgt für eine konstante Schneidhöhe Handbedienung für bequemes Verfahren und Einrichten am Werkstück Betriebsanleitung auf DEUTSCH Ausrüstung gemäß CE Vorschriften ALTERNATIVE PLASMAQUELLEN: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync P ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 25230 € : 1250x2500 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : 1/10 mm : 470 l : 500 kg/m² : 3060 mm : 1760 mm : 1500 mm : 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air co ...

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 22750 € : 1000x2000 mm : HYPERTHERM Powermax 45 XP : 6 mm : 12 mm : 25 mm : 4 mm : 45 A : 45 A 50 % ED, 32 A 100 % A : 24 m/min : unter 1/10 mm : 300 l : 400 kg/m² : 2560 mm : 1460 mm : 1500 mm : 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules alternative plasma sources: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air c ...

Plasma cutter, plasma cutter -Equipment: without hose package -Cooling: Water cooled -Max. Cutting current: 70 A -Mains voltage: 3x400V

Including matching transport trolley; equipped with cutting torch; various interchangeable cutting heads; helmet; Equipped with earthing terminal

: neu : 2024 : 2517 : Juni 2024, Zwischenverkau : Deutschland : 36950 € : 750.09 € : 1500x3000 mm : Hypertherm Powermax 105 S : 22 mm : 22 mm : 50 mm : 19 mm : 105 A : 105 A : 24 m/min : 1/10 mm : 400 kg/m² : 3560 mm : 1960 mm : 1500 mm : 650 kg compressed air powered plasma sourceHYPERTHERM Powermax 105 Sync CNC-workbench software (external PC not included) adjustable rollers precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTIONS: Height adjustment by arc voltage Set-up laser Suction bridge (prepared for suction dia ...

Plasmacutting machine for plates amp; tubes! Type: MG 12001.35PPr + CH1200PP 2 plasma cutting heads Hypertherm HPR130 powersource Esab Kjellberg Fine Focus 800 powersource

Was used for cleaning perforated metal sheets, including documentation, without accessories or spare parts.

Screw Diameter: 90 mm // Output Capacity: 400 kg/h

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

ECKERT JANTAR 2 plasma cutting machine was manufactured in 2008 in Poland. The machine equipped with a large working table of 12500 x 2500 mm (length x width) is designed for cutting oversized metal sheets made of carbon and low-alloy steel of maximum thickness of 25 mm (plasma cutting) or 110 mm (oxygen cutting). The torches are powered by a highly efficient HYPERTHERM HPR260 plasma source with a power of 260 A, guaranteeing excellent precision and many years of trouble-free operation. The ECKERT JANTAR 2 12.5×2.5 m plasma-gas cutting machine ensures a high level of safety. A KEMPER filtration system with self-cleaning filters and an extraction table eliminate contamination generated during workpiece machining. The plasma cutting machine is numerically controlled by an ECS 859 controller with all the necessary functions for efficient use of the machine. Technical parameters of th ...

ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...

ESAB EAGLE 2000 plasma cutting machine was built in 2009 in Germany. The machine is designed for machining stainless steel, structural steel, low-alloy steel and aluminium with a maximum thickness of 30 mm and has a very stable and vibration-free welded construction. Excellent cutting precision with simultaneous low operating costs is ensured by the ESAB Precision Plasmarc 201 plasma source with a power of 200 A, which generates a narrow plasma beam with high energy density per small area of material. The plasma cutting machine portal was fixed by two dynamic servo drives operating with low backlash on the machined profile rails (X axis). The dynamic servo drive in the transverse carriage drives the spur gear, which then meshes with the toothed bar of the machine portal, causing transverse movement (Y axis). The plasma cutting machine is equipped with an ESAB CNC control with the late ...

ECKERT AGAT SPEED plasma-gas cutting machine was built in 2011 in Poland. The machine is used for precise cutting of pre-programmed elements in metal sheets with a maximum thickness of 45 mm (plasma cutting) or 100 mm (oxygen cutting). The main feature of the plasma cutting machine is its open structure, made of high-quality welded steel, allowing easy loading and unloading of the workpiece on the work table from either side. To increase the comfort of the machine operator, an extraction table has been installed to eliminate the contamination generated during the cutting process. The high speed of feeds, reaching up to 10000 mm/min, guarantees a significant reduction in machining time. The plasma cutting machine is also equipped with a modern ECS 872 CNC controller and a control panel, as well as a reliable KJELLBERG PA-S45 W plasma source ensuring the highest quality and precision ...

ECKERT SZAFIR BL2 3D plasma-gas cutting machine was manufactured in Poland in 2016. The plasma cutting machine uses a plasma beam generated by a highly efficient KJELLBERG Smart Focus 200 aggregate with a power of 200 A to precisely cut workpieces made of mild steel, stainless steel and aluminium. Stability during machining is ensured by the machine’s high-quality steel portal, which was additionally extended by 700 mm to allow easy loading and unloading of larger metal sheets. The plasma-gas cutting machine guarantees a high level of safety and operator comfort, thanks to a sectional extraction table with a length of 6000 mm and a width of 2000 mm, which is used to eliminate the dust produced during cutting. The plasma-gas cutting machine is also equipped with among others a CNC ECS 872 controller with a 15″ touchscreen, a WALTER SKTG 11 P COMBO screw compressor and a WALTER WDF  ...

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2014. Distinguished by its robust and stable construction, the machine ensures a high degree of safety, long-term trouble-free operation and excellent precision, even during the most intensive and demanding machining of e.g. steel or aluminium. The machine’s entire workspace with a length of 3000 mm and a width of 1500 mm is equipped with an extraction table, which effectively eliminates contaminants generated during machining and ensures comfortable working conditions. The JANTAR 2 plasma cutting machine is also equipped with, among others, a state-of-the-art CNC ECS 872 controller, an ECKERT filter fan and double-sided AC servo motors. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC controller: ECS 872 - work table dimensions (L x W): 3000 x 1500 mm - double-sided AC servo motors - plasma source:  ...

CORMAK PW-1530 AST 1500x3000 plasma-gas cutting machine was manufactured in 2020 in Poland. The machine characterised by its simplicity and ease of use, is used in the cutting process of shapes in workpieces with a maximum thickness of 60 mm. The machine’s work table, made of lightweight aluminium profiles with interchangeable comb bars, is equipped with a two-section extraction system that effectively eliminates contaminants generated during the cutting process. The PW-1530 AST cutting machine ensures excellent cutting accuracy and high repeatability, thanks to a THC voltage height adjuster designed for precise adjustment of the distance between the torch and the sheet metal during processing. The machine’s extensive equipment includes a camera mounted at the torch for easier positioning from further down the table, a SHERMAN CUTTER-130 CNC plasma source and CAD/CAM FastCAM softw ...

STIGAL DYNAMIC SPEED HQ plasma cutting machine manufactured in 2012, precisely cuts workpieces made of plain steel, stainless steel and aluminium on a large work table with dimensions (L x W) of 4000 x 2000 mm (the table grate will be replaced with a new one before sale). The numerically-controlled plasma cutting machine ensures a high degree of operational safety, as the machine is equipped with an extraction table designed to eliminate the contamination generated during cutting. The plasma cutting machine is also equipped with a reliable CEBORA PROF 165 HQC plasma source and GudePol GO-R refrigeration dryer. Technical data of the plasma cutting machine STIGAL DYNAMIC SPEED HQ - work table surface (L x W): 4000 x 2000 mm - cutting length: 4000 mm - cutting width: 2000 mm - maximum sheet thickness: 20 mm - plasma source power: 120 A - power consumption: 7000 W - DYNAMIC SPEED H ...

SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...

ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...

KT7 CNC KRP 150 X 300 SILVER plasma cutting machine built in Poland in 2019, offers its user fast and precise machining of sheet metal weighing up to 4 tonnes. The compact design and all components of the machine have been fully galvanised to prevent rust and guarantee trouble-free operation throughout its lifetime. For cutting workpieces, the machine uses a fully automatic torch with a special Torch Sensor Control (TSC) system, which prevents damage to a torch during operation. The KT7 CNC plasma cutting machine is also equipped with an integrated control module with SheetCAM CAM software and additional functions to improve the machine’s operation. Technical data of the KT7 CNC KRP 150 X 300 SILVER plasma cutting machine - work table surface (L x W): 3000 x 1500 mm - maximum sheet metal weight: 4000 kg - feed range in Z axis: 110-270 mm - polished slats and gears - ball convey ...

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in Poland in 2007 is a combination of reliability, high efficiency and excellent precision. This versatile machine with a wide range of machining capabilities features a high-quality steel design with a length of 6000 mm and a width of 2500 mm, which maintains excellent stability even during the most intensive machining. The use of such a large work space allows the convenient loading and unloading of larger workpieces made of e.g. black steel and stainless steel. The offered ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR260 plasma source with power of 260 A, a ECKERT ECS CNC controller and a head for drilling. Technical parameters of the ECKERT JANTAR 2 plasma-gas cutting machine - CNC control: ECKERT ECS - work table dimensions (L x W): 6000 x 2500 mm - drilling head - plasma torch (1 pc.) -  ...

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

CNC firing and plasma cutting machine Zinser 2115 / CNC 500/E, 2 x 5 m Year construction year: 2000, condition very good, Technical data: Working width: 2,250/2,000 mm x working length: 5,000 mm (can be reprinted) track width: 2,750 mm, Total machine length: currently 7,000 mm (can be relocated), positioning speed: 12,000 mm/min. processing speed: 50 - 6,000 mm/min. 2 torch wagons with three-hose machine cutting torches and dues 3-160 mm ( 300 mm) , ( 1. Torch wagon with preparation plasma separators) CNC control: Zinser CNC 500 E with 50 markos (standard figures), Option: e.g. plasma cutting machine Hypertherm HT 40 with machine torch hose package for the sheet metal range up to 12 mm (or see other options plasma cutting equipment) With complete document with software and floppy disks New price of the machine ( 72,500 EUR + 7,640 EUR for MCC 4.5) Price: 19,950 EUR Options ...

SAF PLASMATOME 25 plasma cutting machine was built in 2000 in France. The machine, characterised by its rigid and robust design, is designed for precision cutting of sheet metal with a thickness of up to 45 mm. Thanks to the use of double drives on the longitudinal axis, high working speeds are obtained, which result in high quality and accuracy of machining. Workpieces are machined under a water sheet on a large work table measuring (L x W) 6000 mm x 2000 mm, using a cutting head powered by a powerful KJELLBERG PA-S45 W plasma source. The SAF AIR LIQUIDE PLASMATOME 25 plasma cutting machine is controlled by a control panel equipped with a multi-tasking CNC controller DIGISAF, allowing full control of the machine operation. Technical specifications of the SAF PLASMATOME 25 plasma cutting machine - CNC controller: DIGISAF - plasma source: KJELLBERG PA-S45 W - work table surface a ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

The AJAN SHP 260 A plasma cutter was built in 2010 in Turkey. The machine is in continuous operation. I am selling due to upgrading to a newer model. Characteristics of the AJAN SHP 260 A plasma cutter - cut materials: structural steel, stainless steel, aluminum - maximum cutting speed: 15 m/min - maximum sheet size (length x width): 6 x 2 m - minimum cutting thickness (structural steel): 0.5 mm - maximum cutting thickness (structural steel): 60 mm - minimum cutting thickness (stainless steel): 0.8 mm - maximum cutting thickness (stainless steel): 20 mm - minimum cutting thickness (aluminum): 1.2 mm - maximum cutting thickness (aluminum): 25 mm - total power requirement: 52 kW - power of the plasma source: 260 A Equipment of the SHP260l plasma burner - CAD/CAM software: AJANCAD, Lantek Pulsar - machine plasma source: AJAN PP 260 A - autopsy and extraction table with ...

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a  ...

SPIRO 6000V4 plasma cutting machine built in 2016 in Switzerland, performs ideally in medium and large industrial plants during the industrial production of parts made of steel sheets and non-ferrous metals. To ensure high cutting performance even during the most intensive machining, the extended work space based on a stable design allows simultaneous cutting and unloading of finished products without interrupting machine operation. The SPIRO CUTLASS 6000 plasma cutting machine is operated using the high-speed Spiro HS Controller with a complete library of parametric models and shapes. Technical specifications of the SPIRO 6000V4 plasma cutting machine - work table area (L x W): 6000 x 1500 mm - maximum workpiece thickness (galvanised steel): 6 mm - maximum workpiece thickness (black steel): 6 mm - maximum workpiece thickness (stainless steel): 6 mm - maximum workpiece thickness  ...

SENTE MAKINA PLSS 3X1.5 plasma cutting machine was built in 2015 in Turkey. Distinguished by its ease of use, stable construction and large working area, the machine is used in even the most intensive machining of stainless, galvanised and aluminium sheets. The control panel designed for operating the plasma cutting machine has a specialist CNC controller with the ability of importing programmes in DXF format, which optimises the machining process and ensures economical cutting regardless of the machined material. During its operation, the machine underwent regular servicing and upgrades, during which, among others, the grate was replaced. The SENTE MAKINA plasma cutting machine weighs 980 kg. Technical data of the SENTE MAKINA PLSS 3X1.5 CNC cutting machine - CNC control: SENTE MAKINA - work table dimensions (L x W): 3000 x 1500 mm - grate work area (L x W): 3170 x 1500 mm - plas ...

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Phénix RS MD CUT 2040 plasma cutting machine Following the closure of our manufacturing plant, we are selling our large Plasma table: - 4 Panasonic or HDT brushless motors - Machined frame and beam - Rack and pinion transmission and linear guide - Quality precision reducer - X-axis dual motor drive - Automatic control of the height of the THC torch - Anti-collision system included - Removable steel slag collection tray, exiting on the side of the machine - Removable grating blades mounted on a removable frame - The table is equipped with an integrated fume extraction tray with pneumatic partitioning - Edges facilitating the positioning of the sheets - Grids for collecting small parts on the cutting surface - XPR 170 plasma generator

This SATO Satronik LS2000 Plasma Cutting Machine was manufactured in the year 2011 in Germany. It is equipped with a CNC 310-3 control unit. The machine includes a satomatic HV S 250 PT CNC arc height sensing and a plasma interlock circuit for a plasma tower.

The machine is in good technical condition, after agreement the possibility of testing. ALFATEC CNC compact plasma 2m x 1 m, PEGAS 100 PLASMA CNC, Torch S 125 10m PEGAS 100 Plasma machine, WRYKRYS - technological program. Dimensions: length 270 cm, width 200 cm, table height 80 cm, height including control panel 170 cm, weight 940 kg.

CNC Gantry Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L5600 Year of construction: 2009 CNC Control: Global Control Plus Track width: 5,600 mm Raceway length: 21 m on HEB beams Equipment: 1 x Skew Rotator Delta with plasma torch Power source Kjellberg HiFocus 360i Skew Rotator DELTA - is based on one of the most successful Plasma chamfering units worldwide - Compact design for maximum Effective working width - C-axis rotation +/- 450° - Bevel cuts from -45° to +45° 4 oxy-fuel burner trolleys 3 equipped with ALFA burners Extraction table Beuting Dimensions: 4,200 x 18,200 mm Donaldson Torit filtration system

Plasma Cutting Machine MicroStep MG-PrB 6001.20 + S1200 – Retrofit with drilling rig and pipe cutting system Year of construction: 2010 – Retrofit 2021 Working area: 6,000 x 3,200 mm, including 1,200 mm pipe shaft 1x pipe cutting device: 100 – 700 mm 1x Plasma Rotator Plasma Power Source: Hypertherm HPR 260XD 1x fully automatic drilling spindle: up to 30 mm drilling and up to M20 threading (8-fold tool changer) Filter system: Donaldson DFPRO 8

Very powerful CNC plasma cutting machine Pierce a.s., Czech Republic Manufacturer: Pierce Control Automation a.s. Model: RUM 3000P HD Year of construction: 2014 Condition of the machine: very good Technical Specifications Work table length: 12,000 mm (can be shortened if required) Work table width: 2,500 mm Total cutting capacity: 200 kW Portal width: 3,000 mm Table size: 2000 x 2500 x 630 mm (6 pieces) Max. cutting range: Burrless: 0–32 mm Production die-cutter: 38 mm Maximum cutting capacity: 64 mm Accessories: Documentation Lantek Programming Software Plasma Source: Hypertherm HPR 260HD Internal suction filtration 5500m2/h - NEW unused The machine has undergone a full inspection and maintenance, including testing, by the manufacturer Pierce. We have logs available! Service and spare parts are hassle-free, Czech manufacturer! The machine is no ...

Phenix RS LT CUT 2040 plasma cutting machine With POWERMAX 125 GENERATOR Hypertherm Plasma Torch - Set Harnesses, Hypertherm cables and voltage divider board - Altitude control feeler and Hypertherm anti-collision - Mechanically welded machine frame, rectified on machining center - Machine frame with 4 PANASONIC Motors / Brushless encoder 15003000 Double motorization in X - Automatic game catch-up between rack and pinion - Precision gearbox, guides and racks - Smoke suction trays compartmentalized - Removable slag collection trays by the side - Electrical cabinet - PHENIX Numerical Control TECHNOLOGY - Industrial PC -Laser pointer - 3 axis wired joystick -Pneumatic dot peen marker - Central suction and filtration of smoke EASY 3 7.5 KW -Pre separator (spark trap)

This ESAB Suprarex SXE 5000 Plasma Cutting Machine was manufactured in the year 2012 in Germany. It is equipped with a ESAB control unit with english main language. This machine has a Kjellberg main drive. It can be included 2 Kjellberg HiFocus 280i Plasma Sources and 2 Kjellberg KWE 360 Hot Wire Units with the machine.

This CRM PTFSTD3015 PW Plasma Cutting Machine was manufactured in the year 2006 in Italy. It is equipped with a FLATRON control unit and has 2 axis. The machine has a plasma power of 12,5 kW.

This GASPARINI 2040 Plasma Cutting Machine was manufactured in the year 2008 in Italy. It is equipped with a Plasma HYPERTHERM HPR 130. The machine has a cutting size of 4000x2000mm and the extension of the working area is of a 4000x2000mm. The max. sheet thickness is of 30mm and to be processed is of 60mm.

CNC Portal plasma cutting machine Manufacturer: Messer Griesheim Type: Cortina DS2600 Year of construction: 1997 CNC control: KS30 Cutting area: 1. 5 m x 3 m Vacuum table: Size 1.5 x 3 m 2 Plasma torch Power source: Hypertherm MAX 100 d Filter system Cutting software IBE CNC cut

Hypertherm HPR260 plasma cutting machine Description Plasma cutting table 6000x2500 Source Hypertherm HPR260 Digital control: Hypertherm Hypertherm z-axis control head with chamfer capability. Possibility of drilling a beam next to the table

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug

Additional information Compressed Air Plasma Cutting Machine Brand: Daewoo Type: DWCUT-120 Condition: unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 45 mm Connection: 380 volts Adjustable current: 30-120 amps Starting: equipped with "Pilot Arc" duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: plug for CNC control Includes: plasma torch, accessories and protective cover Not included: 380 volt plug