plasma cutter used for sale

Plasma hose package -Hose package: water-cooled -Handle: damaged -Length: 10 m -Weight: 6 kg

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

Plasma cutting system with Hypertherm HPR 130 with automatic gas console Cutting up to 20mm Working range: 1500mm x 3000mm inlusive filter system Immediately available under current assembly and commissioning on request

Plasma extraction and filter system Filter BLOC TFK PL Series special central suction and filter unit for plasma smoke when burning and cutting the FILTER BLOC TFK PL series and CQC certified manufacturer according to ISO 15012 and CE drawing FILTER BLOCK - TFK PLASMA 40/60/80 Motor power 5,5 / 7,5 / 11 KW air volume 4000/5500/6200 m3 / h 124/186/248 m2 filter surface dust container 4x/6x/8x 84 liters Automatic jet cleaning system with testing for welding fume category W3 24 Months Warranty The price refers to the TFK PL 40 for further information on request; ready to use

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

Flame cutting machine, plasma torch -Designation: Plasma Electrode Hypertherm 043 020415 -Diameter: 13mm -Length: 41mm -Number: 1 piece available -Total weight: 0.05kg

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Flame cutting machine, plasma torch - Designation: plasma electrode Hypertherm 402 120667 -Max. Load: 200 A -Diameter: 13mm -Length: 41mm -Number: 9 pieces available -Price: complete -Total weight: 0.45kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 120182 plasma nozzle -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.2kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020608 plasma nozzle -for: Hypertherm HT2000 -Number: 1 piece available -Total weight: 0.1kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: diffuser Hypertherm 020607 -for: Hypertherm HT2000 -Number: 2 available -Price: complete -Total weight: 0.1kg

Plasma nozzle, nozzle, electrode, flame cutting machine, plasma torch -Designation: Hypertherm 020448 plasma nozzle -for: Hypertherm HT2000 -Number: 4 available -Price: complete -Total weight: 0.2kg

Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg

Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

Plasma cutting "CR" 6000x2500 with two Hyperterm HT 2000 and HD 3070 generators complete with filter

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

Auction-ID: A1-41275-250

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...

CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC

Offer up to 2 plasma power supplies here. Technical data, as shown in the picture.

ECKERT JANTAR plasma cutting machine was manufactured in 2017 in Poland. Characterised by a robust and stable construction, the machine is designed for cutting shapes in workpieces made of mild steel, stainless steel or aluminium. For precise machining of sheets having a maximum thickness of 38 mm (mild steel) or 25 mm (stainless steel and aluminium), it uses a plasma torch equipped with an HD3000 support with distance adjustment by measuring the plasma arc voltage. The process of cutting workpieces is carried out on a working area measuring 2000 mm in length and 3000 mm in width, equipped with an extraction table eliminating the impurities generated during processing. The plasma cutting machine is offered with a wide range of equipment, including: modern CNC controller ECS 872 for full control over the operation of the machine, and a HYPERTHERM HPR130XD plasma source. Technical da ...

plate thickness:15 mm total power requirement:13 A 9 KVA weight of the machine ca.:50 kg dimensions of the machine ca.:1000 x 400 x 650 mm

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

CNC plasma cutting table of the brand HACO, type Kompakt 3015, suitable for cutting steel and other metal sheet materials. The installation is equipped with a gantry construction, cutting bed and a Hypertherm plasma power source. Includes: Hypertherm HPR130 plasma power source, control panel, torch, hoses and additional accessories

Additional information Compressed Air Plasma Cutting Machine Brand: Hyper Welding Type: CUT-120 Condition: Unused and in the original packaging Maximum cutting thickness: max. Cutting thickness 40 mm Connection: 380 volts Adjustable amperage: 20-120 amps Start: Ahead duty cycle: 60% duty cycle (120 A) Duty Cycle (%) 60 Efficiency (%) 85 Power factor 0.75 Insulation level H Protection class of the shell IP21S Recommend compressor pressure during cutting (B)

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 14A Rated input power: 9.2 KVA Open circuit voltage: 256V Output Current Setting: 20-60A Rated Output Voltage: 104V Cyclic Duration Factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Arc discharge by contact

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

Unused Rated input voltage: 1P AC380V ±15% 50/60Hz Rated input current: 14A Rated input power: 9.2 KVA Open-circuit voltage: 256V Output current setting: 20-60A Rated Output Voltage: 104V Cyclic continuous factor: 60% Efficiency: 70% Insulation class: F Protection class: IP21 Contact arch striking Weight: 14.7 kg Dimensions: 535 x 210 x 380 mm

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095

Unused Rated input voltage: 1P AC380V ±15% 50/60Hz Rated Input Current: 29A Rated Input Power: 19 KVA Open circuit voltage: 280V Output current setting: 30-120A Rated Output Voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38 kg Dimensions: 690 x 335 x 575 mm

WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system

ECKERT JANTAR 2 plasma-gas cutting machine manufactured in 2013 in Poland, is designed for cutting sheets made of e.g. black steel and stainless steel. The machine’s high-quality steel portal has been extended by an additional 700 mm to facilitate the loading and unloading of larger sized workpieces. A sectional extraction table with a length of 6000 mm and a width of 3000 mm effectively eliminates contamination generated during the cutting process, ensuring a high level of safety and great user comfort. Outside the working area of the JANTAR 2 plasma cutting machine, there is a system for cutting pipes and profiles with a special gear and rotating head, giving the possibility of precise cutting of pipes up to 300 mm in diameter by plasma or gas. The machine is also equipped with, among others, an ECS 872 CNC control, a WALTER SKTG 5.5/15 SM screw compressor, a KJELLBERG HiFocus 161 ...

Unused Rated power: 5.5 kVA Rated current: 25 A No-load voltage: 243 V Output current: 20-40 A Rated output voltage: 96 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 40% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

TECHNICAL SPECIFICATIONS Manufacturer: MicroStep Europe Designation: Plasma cutting machine CNC Type: SPL-P 9001.20+S500 Year of construction: 2008 Design: with KJELLBERG plasma source HiFocus 280i Composed of: - MicroStep CNC guide machine SPL-P 9001.20+S500 - CNC machine control MSNC-500 for WindowsXP - CNC flame cutting table with sectional extraction / 9000x2000 mm - Slag trays for the integrated shaft - Kjellberg plasma source HiFocus 280i, with autom. Gas console - CNC interface for HiFocus 280i

Unused Rated power: 9.2 kVA Rated current: 14 A Open circuit voltage: 256 V Output Current Adjustment: 20-60 A Rated output voltage: 104 V Maximum cutting thickness: 20 mm Cyclic Duration Factor: 60% Efficiency: 70% Degree of insulation: F Degree of protection: IP21 Bow start: Contact

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

2011 & 2016, machines have been put away in working order and have had annual inspections

Rated power: 19 kVA; Rated current: 29 A; No-load voltage: 280 V; Output current adjustment: 30-120 A; Rated output voltage: 128 V; Max cutting thickness: 45 mm; Cyclic duration factor: 60%; Efficiency: 80%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact 6093

Plasma Cutting/Oxyfuel ESAB Numorex for sale Technical data: - Plasma source: 240/360 A - Bevel plasma torch for chamfer cutting - Vibrating suction bench for evacuating pieces - Smoke extraction system.

Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095