planing machine used for sale

Key data: 410 mm, 2600 mm, 4 St.

SCM planing machine F410 Product name: Planing machine Type: F410 Manufacturer: SCM (Italy) Machine number: AB.43770 Year of manufacture: unknown Condition: used, revised and checked Technical details: -Total length of both tables: 2,600 mm - Length of feed table: 1,450 mm - Length of acceptance table: 1,150 mm - Planing width: 410 mm - Diameter knife shaft: 120 mm - Number of planing knives: 4 pieces Tersa knives - Blade shaft speed: 5,000 rpm - max. chip removal: 5 mm - 1 x suction nozzle, diameter 120 mm - 1x joining stop (length: 1,100 mm, height: 170 mm, tiltable 90° - 45°) - 1x folding stop Engine data: - Voltage: 380 V - Current: 6.5 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,800 rpm Machine dimensions (set-up dimensions) L x W x H: 2,600 x 1,200 x 1,050 mm Transport dimensions (L x W x H): 2,700 x 1,200 x 1,200 mm (on pallet) - Number o ...

Key data: 500 , 2600 , 4

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L  ...

Weibert WJ-FS-41 Profi Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height 4 reversible planing knives WJ-300200

Weibert FS 32 Dressing-thickness planing machine Dressing table length of 1500mm Planing width of 320mm Motor 3KW (4HP) S1 100% continuous load operation Max. chip removal of 5mm Dual folding system of the tables to the rear with spring support Thickness height from 4-225mm 3 Automatic planer knife shaft Feed speed. from 8m/min. Table dimension of the thickness table 700x316mm Weight approx. 420 kg Machine tables and aggregate made of cast iron WJ-300100 mreE The following options are available at an additional cost: Engine 4.0 KW (5,5 HP)S1 100% WJ-300103 Wescott Chuck 0-16mm WJ-300102 Slotted hole drilling rig FS 32 WJ-300101 Professional planing stop FS 32 WJ-300104 Side planer stop WJ-300105 Planer knife 320 HSS G&WJ-BA-320-HSS PLEASE INQUIRE ABOUT SPECIAL PRICES!

Multi-sided wide planing machine with chamfer unit LEDINEK SUPERLES 300 4V + 4F Planing width (min/max): 70 - 300 mm Planing height (min -max): 19 -300 mm Workpiece length (min): 2,000 mm Feed speeds: up to 230m/min Weight: 13.500 kg

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Weibert WJ-FS-41 Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min WJ-300200

Straightening planer AF 3 E Product name: Planing machine Manufacturer: Julius Lindner & Co. Görlitz Type: AF 3 E Year of construction: 1966 Machine number: 3420 Condition: used, cleaned, completely refurbished and checked! Technical details: • Machine dimensions (L x W x H): 1,480 x 300 x 770 mm • Table size (L x W): 1,480 x 700 mm • Knife shaft speed: 5,400 rpm • Number of knives: 2 • Weight: 400 kg • Suction nozzle diameter: 120 mm Engine data: Voltage: 380 V Power: 1.5 kW Speed: 2,870 rpm The machine has been completely refurbished. The flat belt, the motor circuit breaker, the supply lines and the motor were renewed. Furthermore, a connection for an extraction system was retrofitted. Price: €1,250.00 (EUR) plus VAT ex Grunow (Brandenburg) (Subject to changes and errors regarding technical data and prices!)

Heavy Hochleistungshobelmaschione type Waco 6,000 with 8 spindles. Feed speed 75 m/min up to 600 m / min. Spindles: U/O/RE/LI/U/O/O/U Working height: 17 mm to 120 mm. Max-width 50 mm up to 350 mm. All spindles with Jointer. Machine with feeder table (accelerator) and cross conveyor. Complete switchgear including FU's. Including soundproof cabin! RONDAMAT and washing machine for planing heads. 1 set of tools.

Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Koelle edge planing machine model FKF 51 is in good condition, ready to use. L x W x H = 3000 mm x 700 mm x 950 mm Weight approx. 200 kg Built in 1982 Engine No. 390 The rubber rings at the pressure rollers should be times replaced. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Planing machine Weinig hydromat H30 W baujar 1990 36m/min Working width 300mm working-high 200mm memeeser of the fresspindel 50mm with suction

High-performance industrial planing machine In good condition, lots of accessories '

Heavy four-sided combined calibration milling planing machine with additional scratch saw for relief grooves Still in operation at Franz Kirnbauer KG Hauptstrasse 2 AT-2630 Ternitz Detailed technical description in the PDF document (as an attachment in the photo gallery).

JPT-310 Dressing-thickness planing machine Planer width:310mm Planer shaft:3-strip knife Engine Power:230/400V 4.7 HP Passage height:3-225mm G&JET-10000290T

Weibert FS32 Dressing thickness planing machine Dressing thickness planer FS32 with spiral knife shaft Weibert FS32 Planer width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 OPTIONS AT EXTRA COST: Slotted hole drilling device Wescott chuck 0-16mm Driving device Dressing table extension adjustable 750mm

Weibert FS 32 Dressing thickness planing machine Planer width: 320mm Planer shaft: 3-reversible knife shaft Motor power: 3KW n=4500rpm, 400V Passage height: 4-225mm Professional side stop WJ-300100 OPTIONS AT EXTRA COST: with professional dressing stop Slotted hole drilling device Westcott chuck 0-16mm Driving device Height adjustment digital Drive motor 4KW S1

410mm planing width electrical height adjustment of the Thicknesser table 3,7KW 5HP 400V 50 Hz star-triangle switch Dressing table length 2000 mm Thickness length 860 mm (890 mm) 4 Column guide in the thicknessing table Planing height 250 mm Dual hinged dressing tables Dressing Guide from 45 ° to 90 ° now only a short time in the price with 4 Tersa knife shaft Special price: NET 4990,- . Options: The comfort package NET 390,-contains Digital display of the thickness table setting 2 Advance speeds 6 and 12 m/1 Thickness Planer table extension 4,8KW 6.6 PS 400V 50 Hz star-triangle switch

Solid spiral drum with 4-way HM reversible plates no adjustment during tool changes necessary Planing width 310 mm Dual fold of the dressing tables Grated dressing table made of grey cast iron Engine power: 230/400V 4.7 PS 3.5 kW Clearance height: 3-225 mm Weight: 240 kg Special price net 2250,-

Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $25,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic C ...

Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-

vert. Internal broaching machine maximum tractive force: 10T Max stroke: 1000 mm Max cutting speed: 10.9 m / min Max reverse speed: 27.5 m / min Clamping surface: 400 x 400 mm Room set: 3 piece

JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

THICKNESS PLANER type SCM S 52 SURFACE PLANER type SCM F 410 SPINDLE MOULDER type SCM T 130 NOT SEPARATE SALE second hand machines

SURFACE PLANER CASADEI DS 510 second hand machine volt. 380/50 working width mm. 510 length of table mm. 2800 cutterblock 4 knives motor power Hp 5,5 net weight kgs. 750

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

FOUR SIDED PLANER model WEINIG PROFIMAT P 23 E with 5 spindles second hand machine working condition : Excellent CE mark : Yes volt. 380/50 grooved table ( removable ) quick tool locking device with tools : Yes , as in video Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 10 ( Kw 7,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved table ( removable ) quick tool locking device Technical details : forward motor power Hp 4 ( Kw 3 ) shaft rotation speed rpm 6000 feed speed : from 5 to 24 mt./min. max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 automatic lubrication system electric height adjustment set of service keys / d ...

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

ADH 26C. Surface thickness Planer Dressing table (Lxw): 1120 x 275 mm Thicknessing table (Lxw): 545 x 258 mm Working height 830 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 5.5 m / min Engine: 1.7 kW 230V Dust nozzle diameter: 100 mm Weight 170 kg G & STÃ? 5904026 optionally with 400V

ADH 31C. Surface thickness Planer Dressing table (Lxw): 1295 x 325 mm Thicknessing table (Lxw): 545 x 308 mm Working height 850 mm Thickness: 5-225 mm Max depth of cut 3 mm Planer shaft diameter: 70 mm Planer blade 3 Speed 1/min 5200 Feed 7 m / min Motor: 2,2 kW 230 v Dust nozzle diameter: 100 mm Weight 210 kg G & STÃ? 5904031 optionally with 400V

MULTI MOULDER machine type WEINIG PFA 17N second hand machine 6 spindles with tools - Composition : 1° shaft : surface planer . motor power Hp 5,5 2° shaft : spindle moulder . motor power Hp 4 3° shaft : spindle moulder . motor power Hp 5,5 4° shaft : spindle moulder . motor power Hp 5,5 5° shaft : thickness planer . motor power Hp 5,5 6° shaft : surface planer. motor power Hp 5,5 inlet length mm. 2000 feed speed: from 7,8 to 58,8 mt./min max. useful working width mm. 170 max. useful working height mm. 120 lubrication system weight kgs. 2600 volt. 380/50

Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Type MB504C Working width 400 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Curve planer

• Min working width (finished size): 25 mm • Max working width (finished size): 190 mm • Min. working height (finished size): 8 mm • Max working height (finished size): 115 mm • Min. workpiece length: 300 mm • Spindle speed: 6000 rpm • Spindle diameter: 35 mm • Min/Max tool diameter Horizontal spindles: 100 mm • Min. tool diameter of the vertical spindle right: 100 mm • Max tool diameter of the vertical spindle right: 100 mm • Min. tool diameter of the vertical spindle on the left: 100 mm • Max tool diameter of the vertical spindle on the left: 100 mm • Clamping length Vertical spindles: 110 mm • Clamping length Horizontal spindles: 180 mm • Diameter of feed rollers: 120 mm • Feed table length: 1800 mm • Quick adjustment task table and wing ruler: 10 mm • Diameter of the suction nozzle: 200 mm • mechanical indicators for width and h ...

CATALOG NO. 6946 TECHNICAL SPECIFICATIONS - max width of the workpiece 210mm - max thickness of the workpiece 120mm - number of spindles 2 pcs - spindle diameter 50mm in advance: - 3 insertion, pulling, rubber, smooth shafts including 2 double - 2 leading, rubber, pulling shafts including 1 double - heads on supports - head adjustment up / down - electric height adjustment of the upper head - electrical setting of planing thickness - spindles equipped with a brake - main motor 2×5,5kW - smooth regulation of feed speed - feed motor 3kW - feed on cardan shafts - diameter of extraction connection 2x160mm - dimensions length / width / height 2350x1780x1950mm - weight 1882kg – German production – jointers – for sharpening knives on the head – 2 Hydro heads included – unpainted – very good condition, used planer Net price: 33900 PLN Net price: 7533 ...

Gubisch Type 147 4-Side planer Planing width 180 mm Planing height 150 mm Feed stepless with 7 spindles of which a universal spindle with length dressing table Drive 34.6 kW with lots of tools, planing knives, etc. with planing heads and several groove and spring sets at least 4 planing heads, with chamfering knife and spacer discs

TECHNICAL DATA: Working width mm: 530 Working height max mm: 300 Number of knives: 4 Feedrate max m/min: 19 Total connection kW: 4 Weight Kg: 800

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

TECHNICAL DATA: Working width mm: 230 Planing height mm: 150 Infeed table length mm: 2000 Feedrate m/min: 6-24 Rotation speed max rpm: 6000 Number of spindles: 5 Spindle configuration: 01 - Planer wave - 7,5 HP 01 - Right spindles - 10 HP 01 - Spindles left 01 - Spindles top - 10 HP 01 - Bottom spindles - 10 HP Total connection HP: 42,75 Weight Kg: 2400 Feeding magazine

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041

Planer and multi-leaf saw, ideal for batten production. 2 planing shafts above and below with 5 knives per shaft. Planing height 200 mm Planing width 600 mm. Engines: Bottom 18.5 KW. Above 18.5 KW. Electric table adjustment. Feed up to 23 m /min. Attached multi-leaf saw Raimann DK 14. Cutting width 407 mm. Cutting height 50 mm. Motor 37 KW. Setback fuses and fluted feed rollers with pressure. Feed unit on the inlet side.

CATALOG NUMBER 5843 TECHNICAL DATA - shaft width 510mm - 3-knife shaft - shaft cover - length of the tops 2530mm - cast iron tops - both adjustable tops - cast iron guide adjustable at an angle - 3kW engine - dimensions length / width / height 2530x900x1000mm - weight 897 kg ADVANTAGES - Italian production - used planer - intended for professional use Net price: PLN 11500 Net price: EUR 2738 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

REX HOMS 2050 Trimmer Machine year 1991 The machine is located in Spain.

x-travel: NA mm y-travel: NA mm workpiece height: mm stroke length max.: 450 mm table length: 450 mm table width: 350 mm total power requirement: 1,7 kW weight of the machine ca.: t dimensions of the machine ca.: m Shaper, horizontal,mechanic,vice hydraulic The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.