pipe mill used for sale

Edge flush milling machine JKO LT 750 with feed-in apparatus Masch. No. 1666 L x W x H: 1100 x 1000 x 1500 mm Built in 1966 Weight approx. 520 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

KIMLA BPF 1530 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large vacuum table by a powerful high-speed spindle. X,Y,Z axes are, in turn, driven by reliable digital servo drives that provide the appropriate acceleration and speed in each direction. The BPF 1530 CNC milling machine is offered with an extensive range of equipment, consisting of, among others, a BECKER vacuum pump and a tool correction sensor. The machine has undergone regular maintenance and servicing. During the last service in the second half of 2024, the vanes in the vacuum pump were replaced. It is also possible to purchase an additional new spindle at a net price of 2250 EU ...

X - axis 600 mm Y - axis 450 mm Z - axis: 450 mm B - Axis - 120 / + 45 ° C - Axis 360 ° Spindle speed range 20,000 rpm Spindle drive 18 KW Torque 91 Nm Tool holder 63 SK Pallet size 350 x 350 mm Large pallet load 150 kg Number of tool locations in the magazine 60 Large tool diameter 80 (125) mm large tool length 200 mm Gross tool weight 6 kg Tool change time approx. 3 sec. Feed range m/min Express feed m/min Rapid traverse B - axis 50 rpm Rapid traverse C - axis 140 rpm Machine weight 8100 kg Machine dimensions 6.6 x 4.0 x 2.8 m CNC HEIDENHAIN iTNC 530 Electr. Handwheel Probe BLUM Laser Direct displacement measuring systems 60-speed tool changer NC - Swivel rotary table (Torque) 7-fold pallet changer Spindle coolers SIGMATEC 15 / 900 cbm/h Oil Mist Extraction Internal coolant device 18 - 70 bar Conveyor

Cone slot milling machine Duko L x W x H: 1300 x 1000 x 1500 mm Weight approx. 800 kg Built in 1963 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

PLOT ELECTRONICS SENTINEL N 2160 CNC router was built in 2021 in Poland by PLOT Electronics. This extremely efficient machine is the perfect choice for precision machining of a wide range of materials, i.e. aluminium, plastics and wood. The machining process is performed on a large vacuum table by means of a reliable, high-speed spindle. X,Y,Z axes are in turn driven by reliable servo drives, which provide appropriate acceleration and speed in each direction. All this is complemented by a light, yet rigid design that eliminates any vibrations during even the most intense challenges. The offer price includes extensive equipment, consisting of, among others, a vacuum pump and advanced cncGraF Pro software. The SENTINEL N 2160 CNC milling machine weighs approximately 2000 kg. Technical specifications of the PLOT ELECTRONICS SENTINEL N 2160 milling machine - software: cncGraF Pro - mach ...

For sale is an entire fully CNC-controlled planing mill. The planing mill can be visited during operation. A visit training is possible when buying before dismantling. The system has been in reliable operation since 1981 and has always been professionally maintained. Equipment: 1. Stacking Task 2. Rupa vacuum lifter - Age: approx. 1.5 years 3. Cross Conveyor 4. Canali Cut-off Band Saw - 2 band saws 5. Longitudinal/transverse conveyor incl. roller conveyors 6 Costa planing machine with 10 spindles - Fully CNC controlled Spindle configuration: 1 spindle horizontal 2 Lifting spindle right vertical 3 Lifting spindle left vertical 4 Lifting spindle horizontal 5 Lifting spindle right vertical 6 Lifting spindle left vertical 7 Lifting spindle top horizontal 8 Lifting spindle bottom horizontal 9 Lifting spindle at the bottom horizont ...

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

CME FU2 universal milling machine. Table: 1400x300mm. Longitudinal travel: 1050mm. Cross travel: 300mm. Vertical travel: 500mm. ISO40. Hure head. Speeds range: 12. (40-1800rpm). Motor power: 7,5Kw. DRO Fagor for 3 axis.

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knife: 4 Rotor blade: 7 x 4

front roll 560x1500 for mixing mill Buzuluk 14823

CNC Model: Heidenhain CNC Version: ITNC 640 Head Type: Automatic Fourth and Fifth Axis Head Additional technical notes for the head: 0.001° positionable head Tool Mount: ISO 50 Spindle power: 38Kw Number of spindle speeds: 4000 Number of tools: 40 X-axis travel: 4000mm Y-axis travel: 1300mm Z-axis travel: 1500mm Fast feeds linear axes X Y Z: 20m/min Table dimensions: 4100 x 1100mm Table capacity: 12000Kg Guides: roller CNC divider: yes Rotation: Continuous Cutter type: fixed bench Chip conveyor: belt Machine equipment: optical scales :::D DIMENSIONS AND WEIGHT::: Length: 10560mm Width: 4200mm Weight: 26000Kg

rear roll 560x1500 for mixing mill Buzuluk 14823

Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)

SERON 1310 PRO CNC router was built in 2020 in Poland by SERON Sp. z o.o. Sp.k. The machine, designed for precision machining of a wide range of materials, is distinguished by a number of modern, carefully selected components with the best technical parameters. Materials such as mild metals, composites, plastics and solid wood are machined by means of a high-speed brushless spindle. The design, made entirely of stress-relieved steel profiles and sheets, in turn, ensures the long-term stability and dimensional precision of the machine. The operator has at his disposal an industrial, professional CNC control with many useful functions. Among them, there is for example the smooth vector analysis function, which ensures that the machine runs smoothly even with dynamic changes in direction and complex shapes. All equipment is integrated inside the security fence. The 1310 PRO CNC milling m ...

Skoda W200H - CNC Plate Boring Machine – Bearing Sleeve (RAM) Year of construction : 1992 Electrical & Electronics Overhaul : 2021 Spindle : 200 mm ( Ø ) ISO 60 X : 7,800 mm Y : 5,400 mm W : 900 mm ( spindle ) Z : 900 mm ( Carrying sleeve / RAM 520 x 520 mm ) Z1 : 2,000 mm (table) CNC rotary table : 2500 x 2000 mm – 40 T Spindle speed : 0.8 - 800 rpm Rapid traverse speed : 6000mm/min Spindle motor : 75 kw Total power : 140 kW Machine weight : 84 T (approx.) Control : FAGOR 8055 Processing heads 3 pieces 1.Angular translation head 2. Vertical milling head 3.Horizontal milling head Base plate : 4,480 mm x 1,145mm Conveyor

Table clamping area: 290 x 1250 mm Table movement x: 800 mm Table movement y: 360 mm Table movement z: 450 mm Milling head pivotable: 90/45 ° Spindle holder: ISA 40 Spindle speeds: 56 - 4500 rpm Pinolene stroke: 125 mm Pinolene feeds: 0.035; 0,14; 0.7 mm/min Spindle drive: 1.8/2.4 kW Space requirement: 2000 x 1900 x 2300 mm Weight: 1700 kg

Colloid mill Manufacturer: Probst & Class (PUC) Type: N60/S Factory no.: 87079 Power: 2.2 kW 380 V with on-off button n=2825 rpm miti hopper, circulating line & three-way valve very good condition LWH: 700 x 300 x 740 mm

Colloid mill (vibration colloid mill) Manufacturer: Probst & Class (PUC) Type: JV14 N°: 67017 with hopper Engine: Loher & Sons Power: 1.5 kW 2880 rpm normal-toothed grinding set very good condition On-off button Product outlet milk pipe union mobile on lockable wheels LWH: 840 x 350 x 350 mm

Used only for experiments.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

Bead mill Manufacturer: Fryma Type: MSZ-12 Factory no.: M12362 Pressure product space: 2.5 / 0.2 bar Pressure double jacket: 2.0 / 0.2 bar Power: 2.5 kW 380 V Machine in EEx protection Rotor speed controlled Feed pump speed-controlled with pressure & temperature gauge Grinding set as good as new Switchgear in EEx protection very good condition Weight: approx. 150 kg LWH: 700 x 600 x 750 mm

KIMLA BPF 2131 CNC router was built in 2014 in Poland by POLCOM Przemysław Kimla. The machine, dedicated to both small and medium-sized businesses, is the perfect choice for precision machining of a wide range of materials. All machining processes, i.e. milling, cutting and engraving, are performed on a large work table by means of a powerful, high-speed spindle. The offer also includes a set of tool holders. The KIMLA CNC milling machine weighs 3100 kg. Technical data of the KIMLA BPF 2131 milling machine - machined materials: mild metals, wood, wood-based materials, plastics, etc. - CNC controller - work table dimensions (L x W): 3100 x 2100 mm - air pressure: 8 bar - power: 14 kW - power supply: 400 V; 50 Hz - weight of the BPF 2131 machine: 3100 kg

Hammer mill Manufacturer Faller used, outdated Engine AEG Type AN 200 LS 2 230 V 91 A 30 KW Speed 2935 rpm can also be used as a wet mill with attachable screw forced insertion for heavy-flowing products Dimensions Width 1400 mm Height 1000 mm Depth 1000 mm (incl. engine) Drum box width 250 mm Drum diameter 550 mm Funnel 350mm x 400 mm Screen plate 20x4 mm (stretch metal) Changes and errors in the technical data, data and prices and intermediate sale reserved.

New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT

Qty. 1 Second-hand milling and scalping machine – Copper and brass strip – stopped in 2010 Mfc.: Torrington Type: FR1 Built: 1976 Milling and scalping from the upper and lowe sides Strip width: 508 - 770 mm Strip thickness: 10.0 – 13.5 mm Coil weight: 6.5 Ton Capacity: approx. 200 000 T/annum

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range- 5000 rpmDrive power (40% DC)32 kWMax. torque (40% DC)360 NmC-Axis Speed-5000 rpmTorque of C-Axis (holding torque)280 NmT ...

Technical Specifications - Bridgeport Series I Table Size / Work Surface 9" × 49" (≈ 299 mm × 1245 mm) T-slots 3 pieces, spacing 2.5" (≈ 64 mm), groove width 0.625" (≈ 16 mm) Travel X (Transverse) without Power Feed: 36" (≈ 914 mm) with power feed: 33" (≈ 838 mm) Travel Y (Transverse to Feed) 12" (≈ 306 mm) Quill Stroke (Drilling Spindle Stroke) 5" (≈ 127 mm) Knee Lift (Z-Axis of Table) 16" (≈ 406 mm) Ram Adjustment (Head Stem on Ram Slide) 12" (≈ 306 mm) Min. / Max. distance spindle axis to table nose (spindle/table nose distance) min: 2.5" (≈ 64 mm) Max: 18.25" (≈ 463 mm) Min. / Max. distance spindle to column front (minimum/maximum internal width) min: 6.75" (≈ 171 mm) max: 18.75" (≈ 476 mm) Spindle / Quill Spindle Diameter: 1.875" (≈ 48 mm) Quill Diameter: 3.375" (≈ 86 mm) Spindle holder (standard): R-8 Spindle motor / power 30 minute ...

Union boring mill CBFK 150/2 from 1990 for sale. Is currently still in use,. Technical details / accessories / addition: x-travel 3000 mm y-travel 2000 mm z-travel 1600 mm Spindle diameter 150 mm Spindle holder ISO 50 Spindle stroke 700 mm Spindle speeds - infinitely variable 5 - 2500 rpm Rapid traverses 10000 mm/min Table clamping area 1600 x 2000 mm Workpiece weight approx. 20 t Spindle drive motor 50 kW Feeds x/y/z - infinitely variable 1 - 9999 mm/min Table positioning 360,000 ° Total power requirement approx. 70 kW Machine weight approx. 40 t Dimensions approx. 6.0 x 8.0 x 4.5 m In 2005: new 5-axis CNC control Dr. Heidenhain TNC 430 - electron. Handwheel HR 410 for all axles with V24 interface, punched tape reader, new electrics, new hydraulics, new servo motors, 60-speed chain tool change magazine model WM III k02 B-axis (round table adjustment) 360,000  ...

Used mill made by Comec, model MM-12. New 2014. Weight 650 kg, 12 L, 30 kW, 6 Bar, CE, Eex dIIB T4. Control panel.

Micron WF 61 C Equipped with a controlled round table Workspace X-axis: 800mm Y-axis: 500mm Z-axis: 460mm Table: 1000 x 500mm Number of working spindle speeds: 21 Speed range 40-4000 rpm Pinole movement vertical: 90mm Feed speed in all 3 axes: 1-3000 mm/min

CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With path control MILL PLUS iT Year of Make: 2006 Travel: X 800 Y 800 Z800 Speed range: 0 – 8,000 rpm infinitely variable ( SK 50 ) With the following accessories: NC rotary table 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine positions as a double gripper ( SK 50 ) Full protection cabin with sliding doors and interior lighting IKZ – 40 bar Conveyor Rotoclear Tool Measurement BLUM Laser 3 D Probe Heidenhain TS 641 Operating mode 3 + 4 Electronic handwheel 3-Piece Height Adjustable Machine Shoes Transport device Operating instructions

Mikron VCP 800 2007 Built in 2007 Control Heidenhain iTNC 530 Travel X-800mm , Y-650mm , Z-500mm Working spindle: Spindle speed max. 12000rpm. Tool magazine: Number of tool slots 36 Machine table: Clamping area 800 x 650mm Accessories: Inner coolant supply - Belt filter system 20Bar Conveyor

Lid Maho DMC 80 U hi-dyn Workspace: X-axis: 800mm Y-axis: 700mm Z-axis: 600mm Workpiece weight: 800 kg Number of axes: 5

DEFUM WFM-100 boring machine was built in 1984 in Poland by the Dąbrowska Fabryka Obrabiarek DEFUM. The machine is designed for precision machining of workpieces with complex geometry and high weight. All machining processes, i.e. drilling, milling, boring and thread cutting, are performed on a stable work table by means of a powerful spindle with a diameter of 100 mm. The WFM 100 horizontal boring machine weighs 11000 kg. Technical specifications of the DEFUM WFM-100 drilling and milling machine - feed in the X/Y/Z axis: 1200/1000/600 mm - work table dimensions (L x W): 1100 x 1100 mm - maximum workpiece weight: 3000 kg - maximum spindle rotational speed: 1600 rpm - spindle diameter: 100 mm - spindle drive power: 18.5 kW - dimensions (L x W x H): 4610 x 3620 x 3110 mm - weight of the DEFUM machine: 11000 kg

5 Axis Lid Maho DMU 200 P Built in 2000 The machine is in very good condition. Videos under power available ! Technical data: Travel: X 1800 mm Y 2000 mm Z 1100 mm NC Round Table: Table area: 1700 x 1400mm Permissible load: 5000 kg Number of grooves: 11 Axis (swivel range) : 360 x 0.001 degrees Motor spindle: 8,000 rpm (SK50) Tool holder: SK 50 Tool changer: 60 seats Max tool weight: 20 Kg Max tool length: 450mm Max tool diameter: 110mm

Bessler - Wood Milling Machine Speed in 18mm Koskisen Grey consisting of a router table (X-axis), a portal (Y-axis), a Z-axis and a base frame filled with polymer concrete. Mechanics set: consisting of profile guides KPF-S 20 incl. carriage. Ball screw, for the Z-axis. Precision racks, with a gearing quality 8. Profile rails for the installation of limit switches. All sub-elements assembled. Machine feet adjustable. Control set: consisting of planetary gears, with a reduction ratio of 1:5 Stepper motors with 9.2NM, 4A. High-performance power amplifiers with 80V each, a 70V power supply and core transformer, completely pre-assembled in the control cabinet. Sensors for each axis. Protective device CE-compliant due to moving suction device. High-frequency spindle with 2.2KW incl. union nut, frequency converter, mains filter, brake resistor, as well as collet set. 21.5 ...

Notching cutter Wegoma Type: AKF 125 for milling plastic and aluminium profiles with profile stop on both sides swivel 60° Pneumatic clamping device Manual feed with hand lever of the three-phase milling motor Engine start directly at the hand lever Suction nozzle with a diameter of 100 mm running on the milling carriage Profile stop adjustable without tools with locking bolt for 90° and 45° on both sides Power milling motor 1.5 kW Speed milling motor 2800 rpm Milling path max. 380 mm Milling cutter diameter/height max. 210 mm/ 90 mm Milling spindle diameter 27 mm Dimensions: L 700 mm x W 500 mm x H 700 mm Weight approx. 50 kg

Müro paper milling machine; Condition New; Makita machine; Connection to the milling head for suction.; for milling blocks; 5 pcs. available. Paper mill Müro; condition new; Makita nachine; connector at the milling head for dust suction; used for milling blocks; 5 pic. on stock.

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Operating hours: 600h Specifications: Travel in X/Y/Z: 450 / 350 / 400 mm Distance from spindle nose table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Working feed X/Y/Z: 10 - 2000 mm/min infinitely variable Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (rigid angle table) Max. table load: 30 kg (rigid angle table) Vertical milling head: Speed range: 10 - 5000 1/min Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2270kg Equipment: - Swivel control panel - Shafts and gears hardened and ground - Digital display Sinumerik 828D - Clockwise / counterclockwise rotation of the main spindle - Linear guides - Four-bearing milling spindle radial/axial - All pinch points eliminated by covers - Main motor with spindle brake

FN Steel high‑capacity hybrid rolling mill - continuously modernized through major upgrades - delivers wire rod and bar‑in‑coil from Ø 5.5 mm to Ø 30.0 mm at speeds up to 100 mps. Combining technology from the three major OEMs, it offers speed, flexibility, and quality for the most demanding markets. ‘SMS-PRIMETALS-DANIELI’ High Speed Wire-Rod & Bar-in-Coil Rolling Mill Highlights Wire-rod (‘Morgan line’): Ø 5.5 –16.0 mm with pre-finishing and reducing sizing mills Bar in Coil (‘Garret line’): Ø 16.5 –30.0 mm with two coilers for higher output On-line Heat Treatment: water boxes and temperature-controlled cooling conveyor to achieve desired microstructures Capacity: > 400,000 tons per year Applications: High‑carbon, alloy, bearing, spring, cold‑heading steels Rolls & Guides’ Shop: Fully equipped workshops Spare Parts: L ...

With Electrical motor

Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Win ...

IDEAL Krug & Priester 1080 Lever Cutter Cutting Machine Material knife grinding angle 75° Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials Regrindable knife set made of Solingen knife steel Complete with solid base and foot pressure Fold-out side table, right Side stop with scale in mm and inches Infinitely adjustable back gauge with locking screw Front gauge with locking screw and narrow cutting device Dial knob for exact measurement of the front gauge Printed DIN format classification A3 to A6 Fixed, transparent blade guard made of shatterproof plastic and knife locking device Particularly stable knife bearing made of cast aluminium and double-bearing knife axis for precise cuts Extremely robust metal construction GS Seal of Approval Brand quality Made in Germany Cutting length: 800 mm Cutting capacity: approx. ...

KIMLA BPF 2070 CNC router was built in 2010 in Poland by POLCOM Przemysław Kimla. The machine is used for precision machining of parts made of such materials as wood, plastics and aluminium. The machining process is performed on a large work table with a length of 7050 mm and a width of 2085 mm by means of a reliable, high-speed spindle. Process stability, on the other hand, is ensured by an extremely rigid design that effectively eliminates any vibration and oscillation during even the most intense challenges. All this is complemented by an industrial CNC controller with easy-to-use PC-CAM software. The BPF 2070 CNC milling machine weighs 6000 kg. Technical specifications of the KIMLA BPF 2070 milling machine - machinable materials: wood, plywood, polycarbonate, polymer plates, aluminium, etc. - feed in the X/Y/Z axis: 2085/7050/500 mm - work area (L x W): 7050 x 2085 mm - maxim ...

Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9

Stock# U2475 Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel.

x-travel: 10000 mm y-travel: 1500 mm z-travel: 1000 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.