pipe bender used for sale

Lengths: 58, 76 and 101 cm. Otherwise parcelled items visible in the photos are not included. Auction-ID: A1-50663-1426

1st yoke diameter tube 320mm. 2nd yoke diameter tube 270mm Auction-ID: A1-50892-101

Shortest length: 53 cm. Longest length: 76 cm. Auction-ID: A1-50663-1454

Mixed pallet lot of industrial/plumbing pipe fittings, consisting primarily of copper fittings together with a separate tray of stainless-steel / steel threaded and weld fittings. Contents visible include: Approx. 40–50 copper fittings, predominantly large-diameter straight couplings/sockets and reducers Copper 90° elbows Copper T-pieces / tees Copper pipe section Several brass threaded adapters/unions Brass multi-port manifold/component Stainless-steel / steel weld-on sockets and pipe sleeves Stainless-steel threaded couplings, unions and adapters Large threaded fitting marked TC 4 316L”, indicating approximately 4-inch, 316L stainless steel Additional smaller threaded and weld fittings Auction-ID: A1-51282-51

Mixed pallet of industrial water-supply / pipeline components, comprising large flanged fittings, valves, couplings and associated connection components. Contents visible include: Large flanged basket/foot strainer or suction strainer with perforated protective screen Large blue flanged pipe bends/elbows Flanged reducer/adaptor section Flanged outlet/bend assembly with protective top cover Approx. 3 small tapping/service valves with brass connection sections Assorted blue mechanical pipe couplings/adaptors Small saddle/tapping fittings 2 straight compression/repair couplings Additional flanged and threaded connection components Loose handwheel and associated fitting/accessory Various seals and connection pieces Auction-ID: A1-51282-48

INTEGRA Biosciences - VIAFLO 384 The VIAFLO 384 from INTEGRA is a multichannel electronic pipette designed to speed up the handling of liquids in 24, 96, 384 and 1536 well plates. Compact and intuitive, this system can be used like a conventional manual pipette, while offering the ability to process multiple samples in a single step. Please inspect. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force. Lots may be added to the list later. A prior exhibition is set up, please inspect. The equipment is made available on pallet or pallet box or cardboard with all the appropriate protections, the pri ...

industrial rubber expansion joints / flexible flange compensators in assorted sizes. Designed for installation in industrial pipework to absorb vibration, movement and thermal expansion and to reduce transmission of mechanical stress through the piping system. The lot consists of multiple double-flanged expansion joints with flexible rubber bellows and metal flanges. Various nominal diameters are represented, ranging from relatively small to large-bore connections. Details: - Type: Rubber expansion joints / flexible pipe compensators - Construction: Rubber flexible body with metal flanges - Connection: Bolted flange connection - Various diameters and flange patterns - Approx. 15–20 units visible - Supplied together on one pallet Auction-ID: A1-51282-37

Mixed lot of heavy-duty flanged industrial valves, strainers and pipeline fittings, supplied with a wooden storage crate. The lot comprises approximately 20 individual components in various nominal sizes. Predominantly cast-iron/steel construction with flanged connections. Visible items include Y-type strainers, balancing/control valves, isolation valves, check/non-return valve-type components and assorted flanged fittings. Contents visible include: Multiple large blue flanged Y-strainers, various sizes Several grey flanged balancing/control valves with handwheel adjustment Black flanged inline balancing/measuring valve with pressure test points Blue handwheel-operated isolation valve Large flanged check/non-return valve-type bodies Assorted flanged elbows and pipeline fittings Smaller flanged valve assembly marked NAVAL Various loose flanged components Wooden storage crate Au ...

Mixed lot of black polyethylene pipe fittings supplied in a wooden pallet box. The lot consists primarily of electrofusion and/or butt-weld type fittings in various diameters and configurations. Contents include: 90° elbows Couplers / sockets Reducers and transition fittings Various large-diameter PE/HDPE fittings Multiple sizes and quantities Many items individually packed and labelled The fittings appear predominantly unused / old stock, although storage marks, dust and damaged or opened packaging are present. Exact quantities, dimensions, manufacturers and individual part numbers have not been verified. Wooden pallet box included. Auction-ID: A1-51282-32

Mixed pallet of industrial and building-services pipe fittings, electrofusion fittings, drainage components and plumbing accessories, predominantly unused old stock in original or opened packaging. Visible manufacturers/brands include Geberit, GF+ (Georg Fischer), Ballorex, Viega and other manufacturers. Contents visible include: Quantity of Geberit black PE/HDPE electrofusion fittings, including couplings, elbows and reducers in various diameters Large-diameter Geberit electrofusion sockets/couplers GF+ / Georg Fischer packaged pipe fittings, including elbows and other connection pieces Ballorex Dynamic automatic balancing valve, DN15, female Rp 1/2, PN25, high-flow version; code 15232 Carbon-steel press fittings, including C41GL-LBP reduced 90° tee, Ø 88.9–35–88.9 mm Additional carbon-steel elbows/tees and press fittings in sealed bags Viega concealed siphon / Unterputz- ...

Tip Tip Set for 2 Clearline 20 uL Pipettes Auction-ID: A1-51535-309

Beckman Coulter Biomek 4000 automated pipetting robot for laboratory sample preparation. It enables precise liquid dispensing, dilutions, and plate handling in an automated and reproducible manner. Equipped with a programmable and software-driven motorized arm to execute complex protocols. Compatible with different formats (tubes, microplates, tip racks) for great flexibility. Ideal for applications in molecular biology, PCR, genomics, and high-throughput analysis. With PC and software and accessories (see photo) Auction-ID: A1-51535-11

Mixed bulk lot of industrial pipe flanges and associated pipework components, supplied in a wooden storage crate. The lot contains a substantial assortment of drilled circular flanges in various diameters and bolt patterns, together with several flanged fittings and miscellaneous pipe components. Both machined/bright-finish and painted or untreated steel components are present. Contents visible include: Assorted steel pipe flanges in multiple diameters Various flange drilling patterns and nominal sizes Large-diameter and smaller-diameter flanges Flanged pipe sections and fittings Several painted flange components Miscellaneous pipework parts Wooden storage crate Auction-ID: A1-51282-43

INTEGRA Biosciences - Module 96x12.5 For VIAFLO 384 VIAFLO 96 allows multiple samples to be transferred in a single step, significantly increasing pipetting throughput and reproducibility. Auction-ID: A1-51527-61

Length up to 700 cm; In one side/ 2 compartments cantilever rack; Without shelf. This lot must be collected by the buyer himself. Auction-ID: A1-51062-164

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-40408-25

Length up to 700 cm; Various diameters; Without shelf. This lot must be collected by the buyer himself. Auction-ID: A1-51062-163

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-40408-38

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-40408-27

Viewing by appointment 4 pieces the same machines present Auction-ID: A1-40408-30

length up to 600 cm; and 1 post aluminum; excluding cantilever rack; without shelf. This lot must be collected by the buyer himself. Auction-ID: A1-51062-165

Automatic straightener, shaft straightener , MAE -25RH, 1996, used Manufacturer: Maschinen- & Apparatebau Götzen GmbH, Germany Connected load: 14.5kva , Dim.: 2.5 x 1.5 x 1.8m, Weight : 5000kg

Including accessories without the trolley. Auction-ID: A1-51267-5103

With trolley and accessories. The trolley will not be put on a pallet. Auction-ID: A1-51267-5037

Automatic Pipe Coiling, Tying & Wrapping Line – Proinntech PNA-2/240 POL-SERVICE Majcher – manufacturer and supplier of plastics processing machinery with more than 30 years of experience. A professional machine for fast, repeatable coiling and securing of pipe coils. Complete unit, ready for operation – ideal for production plants and converting shops. A video of the machine in operation is available on request, along with additional photos (immediate availability). Main assemblies Binding & Stretch-Wrapping Unit – automatic coil tying and stretch-film wrapping; rigid frame, spool feeders, adjustable tension/tying force, quick material changeover. Coiling Unit – high-efficiency module with adjustable speed; the drum with arms/vanes adapts to various pipe diameters and widths, ensuring consistent coil shape and neat packaging. Control Cabinet with HMI Panel – tou ...

Used Tubular Vise PEDDINGHAUS PIONEER Total dimensions: approx. 900 x 1300 x 1200 mm Scope of delivery see photos! Changes and errors in the technical data, specifications and prices reserved. Viewing on 20.11.26 only with prior registration at r.schober@kobran.de! Attention! We dismantle and load for you. You just have to organize a transport.; For this service, the additional costs shown are.; Auction-ID: A1-51900-82

Packed in cardboard boxes/ stacked on pallet Auction-ID: A1-51015-168

Lot 2205 – batch of various steel tubes/pipes Ø15–95 mm – approx. 4.0 m – 820 kg – incl. storage trestle Mixed batch of various steel tubes, pipes and round construction profiles in different diameters and designs. The batch consists of, among other things, galvanized and used/untreated steel pipes, largely with a length of approximately 4,000 mm. Including the steel storage/transport stand pictured. Specifications: Execution: mixed batch of steel tube/pipe material Specified diameters: approx. Ø15, Ø50, Ø75 and Ø95 mm Length: mostly approx. 4,000 mm Various deviating lengths available Total weight: 820 kg, weighed on site Material: steel Different wall thicknesses and designs Features: Various galvanized pipes /pipes Various used/untreated steel pipes Various round construction profiles Some parts equipped with connection/fastening parts Steel stor ...

Batch of PVC pipes Ø 400 mm – 15 pieces Specifications: Material: PVC / plastic Quantity: 15 pieces Outer diameter: approx. 400 mm Inner diameter: approx. 370 mm 1x approx. 650 mm high 12x approx. 1,000 mm high 2x approx. 1,110 mm high Features: Metal attachment/mounting tabs on the top Various lengths Particularities: Coming from an agricultural/industrial application Used condition with visible signs of use, dirt and storage Several specimens show discoloration and tarnishing See photos for a further impression of the condition and execution Offered as one batch of 15 pieces Auction-ID: A1-47452-1925

Mounted on 30cm thick steel plate. Lot is very heavy. Auction-ID: A1-50997-11

Equipped with foot control and various accessories. Auction-ID: A1-50997-15

Auction-ID: A1-50997-96

Auction-ID: A1-50997-95

Auction-ID: A1-50997-75

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...

IDID3908 Key Plant 25VP - Rotary-tilting pipe positioner / Dreh-Kipp-Rohrpositionierer 3.5 t Heavy-duty industrial Tilt-and-turn welding positioner, 25 t load capacity, 2500 mm table diameter, incl. control system Robust industrial turn-tilt welding positioner, load capacity 25 t, 2500 mm table diameter, incl. control