pipe bender used for sale

welding line for galvanized and black pipes.

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 2. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 6. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 7. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Here is a list of available equipment for pipes and profile extrusion from EU constructors., New equipment is constructed by renouned German Constructors, Used equipment is in good working conditions, Check the PDF list below and revert to us with your inquiries., Be very specific in yuoe questions and please don not forget to give your full contact, yourname, your Company name, Country, Whatsapp and phone no. Well be happy to assist you.

Safeline Pipeline metal detector 31652 Stainless frame pipeline metal detector, 150mm diameter aperture, with pneumatic reject,

Specifications: - max. material thickness at 40 kg/mm² strength approx. 3 mm - Shaft mount 45 mm - manual hydraulic feed of the top roller - E. foot switch - Drive 400 V / 1.1 kW - Space requirement approx. W 550 x H 1200 x D 1200 mm - Weight approx. 180 kg

X5 pipeline for pumped food inspection. X-ray inspection Year of manufacture 2019 the device has exactly 12 operating hours and is as good as new The X5 pipeline is perfect for inspection of a wide range of pumped and free flowing applications such as poultry, meat, slurries and sauces. The system, which is available with product pipes of 2.5, 3 and 4”, is capable of offering excellent detection of a wide range of contaminants including all metals, bone, glass, stone and dense plastics. The devices are in excellent condition and were replaced due to software changes. The maintenance was always kept, the devices are 10 years old, operating instructions see attachment. Find more here - / Contact us at -

ID3502 OMAG Plant for large-diameter pipes  / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers

Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 66 kg,

MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...

Unused Outlet Pipe + Sleeves + Impellors of a Tetra Pak HMRPX 618 Separator., Ref 1 - Part No 540493 02 - Outlet pipe, Ref 3 - Part No 581978 01 - Guide sleeve, Ref 16 - Part No 540527 02 - Impellor bottom part Ø 140 mm, Ref 20 - Part No 540519 02 - Impellor top part Ø 140 mm, Ref 26 - Part No 540551 01 - Spacing sleeve, Ref 38 - Part No 540528 02 - Impellor bottom part Ø 120 mm, Ref 40 - Part No 540520 02 - Impellor top part Ø 120 mm, Type of Machine: Outlet set

Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price

Reinforced steel scissors Round iron scissors Scissors Manufacturers Muhr and Bender Type 50N/22 and 50N/28 50N/22 intersects at 450N/mm2: Round: 22mm Square 22mm Flat: 35x10mm 50N/28 intersects at 450N/mm2: Round: 28mm Square 24mm Flat: 40x15mm Both machines new and ovp Special price

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Ø tubes / radius in mm: Ø 22 / 67 Ø tubes / radius in mm: Ø 10 / 36

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,

connected load frequency: 220 V rated current: 263/152 : 01516 81 663 694 weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 200 mm plate thickness: 6 mm flat steel: 70 x 7 mm round bar steel: 13 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 800 x 500 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic Drilling Machine, Magnetic Drilling MachineCore Hole Drilling Machine, Metal Core Hole Drilling MachineDR. BENDER Type EK 323Masch No. 180543 year of construction approx. 1988Drilling capacity 23 mmSpindle holder MK 2Spindle speed 160 / 400 / 1250 rpm. Magnet 215 x 105 mmDrilling unit 220 Volt, 50 Hz, 1025 WattE-Magnet 220 Volt, 50 Hz, 65 Watt- Spindle speed via 3 gear stages- Left and right rotation- E-magnet KOCH, type KL32/6- Drill head height adjustment guided in a linear guide- Manual expulsor- Drill stand on

pressure: 30.0 t punching cross-cut in cmm: 30.0 in 9.0 mm stroke: ca. 35 Hub/min throat: 610 mm stroke - stepless adjustable: 0 - 28.0 mm oil volume: 35.0 l work height max.: 1010 mm total power requirement: 4.0 kW weight of the machine ca.: 1200 kg. range L-W-H: 1400 x 700 x 1600 mm good condition () with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel The data for this ad was created with ModulMWS - the softwar ...

Mubea Hole Punch Model KL 750 Optima Year of manufacture 1990 fully functional Hebqowr Dk Rjxim Iqsfb Max. punching force 750 kn Triggering stroke via foot switch With very extensive tools, see photos

Offer 26137 Technical data: - Flat steel shears - knife length 360 mm - For flat material 350 x 13 mm - or 230 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - for material up to 12 mm - Right notching up to 52 x 90 mm - Hole punch - punching force approx. 550 KN - - Stroke infinitely variable 0 - 60 mm - Perforates in steel up to 30 mm Ø in 16 mm - Projection 320 mm - Hydraulic drive 400 V / 5.5 kW - Two separate working cylinders and separate foot switch - Space requirement approx. W 1400 x H 1600 x D 750 mm - Weight approx. 1300 kg - with: - various punches + dies in a separate tool cabinet - Support stop table - Stop

workpiece thickness max.:80 mm workpiece thickness min.:5 mm plate size without being adjusted:2000x1000 mm size of plate min.:100x100 mm control:CNC Mubea Matic100 hole diameter:min/max:10/40 mm workpiece weight:750 kg deburring device max.:d=40 mm traversing speed:80 m/min work height max.:1050 mm positioning accuracy:+/- 0,5 mm opening of gripping pliers min/max.:Typ I: 5/45 mm opening of gripping pliers min/max.:Typ II: 45/85 mm feed length:max. 150 mm rapid traverse::8 m/min spindle turning speed range:112-180-224-280-355-560 U/min work table::L:2500;B:950 mm arm gripping device:4 Stück tool taper:Kegel DIN 6327 longitudinal travel:x=2800 mm cross travel:y=1000 mm bore spindle stroke:max. 150 mm total power requirement:25,0 kW weight of the machine ca.:5,5 t space requirements approx. LxWxH:5,0x5,5x2,7 m plate size with beeing adjusted also 1000x4000 mm possible with roller conveyo ...

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Offer via Gebr. overhauled pipe cutting chamfering machine Fabr. GF GEORG FISCHER Type RA12 Saw was completely overhauled and tested. - completely new drive motor. - Gearbox re-bearings and new seals Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed stages electronic 1 - 6 Power 1800 W incl. feeding unit and auxiliary unit used, in good condition.

Profile bending machine, bending machine, pipe bending tool -Handover: in the current condition as viewed -Accessories: 1 damaged pressing tool: 3/4, see photos -suitable for: pipe size 1/2 to 1 1/2 -Dimensions: 630/670/H440 mm -Weight: 36 kg

Material / Max Capacity / Min Radius Flat / 1 1/4\" / 10\" C Channel 1x2\" / 60\" Round Tube 1 1/2\" / 20\" Round Tube 2\"/60\" Diameter of rollers 1 1/2\" Maximum tube diameter 38 mm. Condition: never used / new (5) Auction-ID: A7-46642-173

Hydraulic Pipe Bender Compressive force 16t 8 pieces of bending elements from 1/2\" to 3\" Condition: never used / new (5) Auction-ID: A7-46642-71

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43538-17038

Auction-ID: A1-47154-199

Crossing pipes in different lengths and wall strands in stock Price depending on wall thickness and length

Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

Offer via gebr. Pipe cutting and chamfasing machine Make GF GEORG FISCHER type RA41 (orbitalum) specifications: Tube outsend diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270rpm. Speed levels electronic 1 - 6 Power 1600 W incl. mounting plate and chassis used, in good condition.