pet injection mould used for sale

Description: Outputs 2x 230V AC - 1x 12V DC 8A - USB 5V 1.0A/2.1A Technical Specifications Frequency 50Hz Watts 3500W Max watts 3800W AC current 15A Max. Height 1000m Performance class G1 Quality class A Max. Ambient temperature 40'c Power factor 1.0 Low power generator set phase only Net weight 46.5KG 5758 Approx. Onsite Dimension. (l x w x h): 740 x 530 x 610 mm, weight approx.: 46 kg

Description: Outputs 1x 230V AC - 1x 12V DC 8A - USB 5V 1.0A/2.1A Technical Specifications Frequency 50Hz Watts 2000W Max watts 2200W AC current 8.7A Max. Altitude 1000m Performance class G1 Quality class A Max. Ambient temperature 40'c Power factor 1.0 Stage one Net weight 22KG 5757 Approx. Onsite Dimension. (l x w x h): 650 x 350 x 550 mm, weight approx.: 22 kg

Description: Outputs 1x 230V AC - 1x 12V DC 8A - USB 5V 1.0A/2.1A Technical Specifications Frequency 50Hz Watts 2000W Max watts 2200W AC current 8.7A Max. Altitude 1000m Performance class G1 Quality class A Max. Ambient temperature 40'c Power factor 1.0 Stage one Net weight 22KG 5757 Approx. Onsite Dimension. (l x w x h): 650 x 350 x 550 mm, weight approx.: 22 kg

Description: 15 liter fuel tank 2x AC230 212CC 230V IP23M speed 3000/min 5623 Approx. Onsite Dimension. (l x w x h): 620 x 500 x 520 mm, weight approx.: 34 kg

Description: 15 liter fuel tank 2x AC230 212CC 230V IP23M speed 3000/min 5623 Approx. Onsite Dimension. (l x w x h): 620 x 500 x 520 mm, weight approx.: 34 kg

Description: 25 liter fuel tank 1x AC230 1x AC400V 420CC IP23 speed 3000/min AVR 5622 Approx. Onsite Dimension. (l x w x h): 750 x 700 x 610 mm, weight approx.: 42 kg

Description: 25 liter fuel tank 1x AC230 1x AC400V 420CC IP23 speed 3000/min AVR 5622 Approx. Onsite Dimension. (l x w x h): 750 x 700 x 610 mm, weight approx.: 42 kg

Description: Maximum power: 0.72 kW Rated power: 0.65 kW AVR: No Taken: 1x230V – 650W 1x 12V DC Engine power: 2 HP Engine type: two stroke Displacement: 66 cm³ Fuel type: fuel mixture (oil + 95 petrol) Ignition: CDI Start: manual Fuel tank: 4.2 litres The indicated power refers to peak power Approx. Onsite Dimension. (l x w x h): 600 x 500 x 400 mm, weight approx.: 20 kg

Description: Maximum power: 0.72 kW Rated power: 0.65 kW AVR: No Taken: 1x230V – 650W 1x 12V DC Engine power: 2 HP Engine type: two stroke Displacement: 66 cm³ Fuel type: fuel mixture (oil + 95 petrol) Ignition: CDI Start: manual Fuel tank: 4.2 litres The indicated power refers to peak power Approx. Onsite Dimension. (l x w x h): 600 x 500 x 400 mm, weight approx.: 20 kg

Description: Maximum power: 0.72 kW Rated power: 0.65 kW AVR: No Taken: 1x230V – 650W 1x 12V DC Engine power: 2 HP Engine type: two stroke Displacement: 66 cm³ Fuel type: fuel mixture (oil + 95 petrol) Ignition: CDI Start: manual Fuel tank: 4.2 litres The indicated power refers to peak power Approx. Onsite Dimension. (l x w x h): 600 x 500 x 400 mm, weight approx.: 20 kg

Description: Maximum power: 0.72 kW Rated power: 0.65 kW AVR: No Taken: 1x230V – 650W 1x 12V DC Engine power: 2 HP Engine type: two stroke Displacement: 66 cm³ Fuel type: fuel mixture (oil + 95 petrol) Ignition: CDI Start: manual Fuel tank: 4.2 litres The indicated power refers to peak power Approx. Onsite Dimension. (l x w x h): 600 x 500 x 400 mm, weight approx.: 20 kg

Description: Rated power: 1.25kW Revolutions: 7000 rpm. Air speed: 320 km/h Displacement: 42.7 cc Fuel tank: 1.2 l Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Rated power: 1.6 kW Engine type: OHV 4 stroke Displacement: 99 cc Guide: no Start: manual Cutting width: 400 mm Cutting height: 20 - 60 mm Adjustment: 3 steps Exhaust: rear Grass shredding (mulching): no Container capacity: 45 litres Front/Rear Wheel Size: 150mm/150mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Displacement: 62 cm³ Maximum torque: 10,000 rpm Rated power: 1.4 kW Fuel Mixing Ratios: 25:1 Vibration level: K=1.5 m/s2, 12.12 m/s2 Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Rated power: 3.6 kW Engine type: OHV 4 stroke Displacement: 173 cc Drive system: self-propelled Start: manual Cutting width: 510 mm Cutting height: 25 - 70 mm Adjustment: 8 steps, central Exhaust: side/rear Mulching (shredding of grass): yes Container capacity: 60 litres Front/Rear Wheel Size: 205mm/250mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Engine type: two-stroke, air-cooled Blade rotation direction: left Oil/petrol mixing ratio: 1:25 Disc cutting width: 255 mm Wire cutting width: 410 mm Maximum speed: 8000 rpm Displacement: 42.7 cm3 Fuel tank volume: 1000ml Carburettor: diaphragm Guaranteed sound intensity level: 110 dB Start: manual Device weight: 7.80 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 400 x 400 mm, weight approx.: 15 kg

Description: Rated power: 1.25kW Revolutions: 7000 rpm. Air speed: 320 km/h Displacement: 42.7 cc Fuel tank: 1.2 l Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Rated power: 3.6 kW Engine type: OHV 4 stroke Displacement: 173 cc Drive system: self-propelled Start: manual Cutting width: 510 mm Cutting height: 25 - 70 mm Adjustment: 8 steps, central Exhaust: side/rear Mulching (shredding of grass): yes Container capacity: 60 litres Front/Rear Wheel Size: 205mm/250mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Displacement: 62 cm³ Maximum torque: 10,000 rpm Rated power: 1.4 kW Fuel Mixing Ratios: 25:1 Vibration level: K=1.5 m/s2, 12.12 m/s2 Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Engine type: two-stroke, air-cooled Blade rotation direction: left Oil/petrol mixing ratio: 1:25 Disc cutting width: 255 mm Wire cutting width: 410 mm Maximum speed: 8000 rpm Displacement: 42.7 cm3 Fuel tank volume: 1000ml Carburettor: diaphragm Guaranteed sound intensity level: 110 dB Start: manual Device weight: 7.80 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 400 x 400 mm, weight approx.: 15 kg

Description: Rated power: 1.25kW Revolutions: 7000 rpm. Air speed: 320 km/h Displacement: 42.7 cc Fuel tank: 1.2 l Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Displacement: 62 cm³ Maximum torque: 10,000 rpm Rated power: 1.4 kW Fuel Mixing Ratios: 25:1 Vibration level: K=1.5 m/s2, 12.12 m/s2 Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Engine type: two-stroke, air-cooled Blade rotation direction: left Oil/petrol mixing ratio: 1:25 Disc cutting width: 255 mm Wire cutting width: 410 mm Maximum speed: 8000 rpm Displacement: 42.7 cm3 Fuel tank volume: 1000ml Carburettor: diaphragm Guaranteed sound intensity level: 110 dB Start: manual Device weight: 7.80 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 400 x 400 mm, weight approx.: 15 kg

Description: Rated power: 1.6 kW Engine type: OHV 4 stroke Displacement: 99 cc Guide: no Start: manual Cutting width: 400 mm Cutting height: 20 - 60 mm Adjustment: 3 steps Exhaust: rear Grass shredding (mulching): no Container capacity: 45 litres Front/Rear Wheel Size: 150mm/150mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Rated power: 3.6 kW Engine type: OHV 4 stroke Displacement: 173 cc Drive system: self-propelled Start: manual Cutting width: 510 mm Cutting height: 25 - 70 mm Adjustment: 8 steps, central Exhaust: side/rear Mulching (shredding of grass): yes Container capacity: 60 litres Front/Rear Wheel Size: 205mm/250mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 15 kg

Description: Power: 2.3 HP Displacement: 43 cm3 Type of energy: combustion Spark plug type: L7T Engine type: two-stroke, air-cooled Air filter type: mesh Fuel tank capacity: 520ml Oil tank capacity: 260 ml Fuel/oil mixing ratio: 1:25 Track length: 18'/40 cm Number of chain links: 72 Inlet Thread Pitch: 0.325 inch Groove Width: 1.3mm (0.50 inch) Anti-vibration system: yes Approx. Onsite Dimension. (l x w x h): 600 x 250 x 250 mm, weight approx.: 10 kg

Description: Rated power: 1.6 kW Engine type: OHV 4 stroke Displacement: 99 cc Guide: no Start: manual Cutting width: 400 mm Cutting height: 20 - 60 mm Adjustment: 3 steps Exhaust: rear Grass shredding (mulching): no Container capacity: 45 litres Front/Rear Wheel Size: 150mm/150mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 20 kg

Description: control: SIEMENS Simatic HMI Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Overview The BP 1800 briquette press was manufactured in 2003 by the German company Strautmann. It is located at a German mineral fountain and is part of a plant that has been shut down because the operator will be bottling in glass in the future and no longer in PET. The briquette press is still assembled and electrically connected. Technical data   Filling opening: 950 x 1300 mm Size: 5595 x 1570 x 2000 mm  Installation area: approx. 5.8 m² without ejection chute Briquetting of  Cardboard  Paper  Styrofoam PET bottles Briquette dimensions: 200 x 200 x 100-300 mm  Briquette weight: approx. 200 to 450 kg/ m³, depending on material  Accessories Conveyor belt Distribution chute

consisting of:  Rinser 12 grippers Filler 16 valves -with central filing height adjusstment 1 head screw capper -for aluminium and PET screw caps -with pick and place unit Bottle formats: -Glas bottles diam.: 69,5mm, 49,5mm, 79,5mm, 89/37mm rectangular, 86,5/51,5 rectangular -PET-Bottles diam.: 59,5mm; 75mm; 61,5mm Capping format: -Aluminium PP 31,5; PP 28 -PET caps: PCO-28 More then 300 machines new and second hand on our seema .de

Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

description: For Ref PET/ PET cycle High performance is possible, ejecting bottles from overhead crates. The bottles are then collected in a container. Ready for squeezer. Price on request Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We a ...

Form tester MAHR MMQ 40 5440057 Test diameter: max. Ø 420 mm R axis: max. 180 mm Z-axis: max. 350 mm Pmax: 60 VA Operating voltage: 110 - 230 V 1AC 50 / 60 Hz 2x Length Gauge T6W 5400054 Form-PC-Interface 7023988 Form-PC FUJITSU SIEMENS CELSIUS W340 with monitor, keyboard, technical documentation and various connection cables used, tested ! Dimensions ( form tester ): 650 x 460 x 750 mm Dimensions ( Form PC ): 510 x 210 x 390 mm Dimensions ( assembled ): 1500 x 830 x 1600 mm

Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )

injection molds set for the production of house facade, a total of 4 pcs of large molds with a total weight of 12 tons

Demag hose pouring machine type: Ergotech 500-200 systems control: NC 4 construction year: In 1999 Schliesseinheit Schliesskraft t: 50 opening ways mm: 400 cross-beam measure mm: 355 installation heights min / max. mm: 210 record size: 520 x 520 hose unity snail diameter mm: 30 hose weights gr: 94 hose volumes cm?: 106 hose pressure cash: In 1995 mass and weights dimensions LxBxH m: 3.6 x 1.4 x 1.8 machine weight kg: 2900 other 1 x nuclear trains

Demag hose pouring machine type: Ergotech per 80-400 controls: NC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 80 cross-beam measures mm: 400 installation height min / max. mm: 250 record sizes: 580 x 580 hose unity snail diameter mm: 40 hose weights gr: 205 hose volumes cm?: 217 mass and weights dimensions LxBxH m: 4.13 x 1.13 x 1.81 machine weights kg: 3800 other 1x nuclear train, new cylinder with snail

Krauss Maffei hose pouring machine type: KM 110-700 C1 control: MC 4 construction year: In 1998 Schliesseinheit Schliesskraft t: 110 cross-beam measures mm: 470 installation height min / max. mm: min 300 record sizes: 745 x 770 hose unity snail diameter mm: 50 hose weights gr: 343 hose volumes cm?: 377 hose pressure cash: In 1892 mass and weights dimensions LxBxH m: 4.6 x 1.4 x 2.1 machine weights kg: 7000 other 2 x nuclear train, accumulator, new hydraulic tubes, Hydromotor anew. Heisskanal 4 zones

Engel Injection Moulding Machine Type: IT 1300/250-HL SAINT CONTROL: CC 100 Year: In 1997 Clamping unit Clamping force t: 250 Opening stroke mms: 850 installation height min / max. mm: 350 Mould fixing platen size h x v: 1050 x 650 Injection unit Screw size mms: 60 Injection shot weight in Polysterol gr: 661 Injection volume cm?: 735 Injection pressure increased cash: 1480 Size and weight dimension HxWxD m: 6.9 x 2 x 2.1 Totally weight kg: 22000

REP model V68 Y20W vertical rubber injection presses, Type G8, year 2003, Clamp force 4000kN, Platen size: 630 x 800mm, Distance between columns: 730/440mm, Daylight: approx 1000mm, Injection unit type Y2000, Piston dia 81.5mm, Shot capacity: 2000cm3, Injection pressure: 1500 Bar Top and bottom ejectors. O/a dimensions: 2950mm x 1410mm x 4800mm high, weight approx 12000kgs. Complete and in very good condition (not operated for over 2 years).

Netstal injection moulding machine Type: Synergy S3000-1700 / 900 2 component control:-year of production: 2000 Clamping unit Clamping force t: 300 gap mm: 0-700 Holm dimension mm: 720 x 720 min/max height mm: 400-750 Plate size: 1127 x 1060 injection unit Screw diameter mm: 70/50 injection weight gr: 916 / 377 Injection volume cm 3: 954/393 spray pressure bar: 1801/1840 Dimensions and weights Dimensions Lxwxh m: 8.8 x 2.3 x 2.3 machine weight kg: 23,300/1,500 Miscellaneous Neureder robot rotary table with servo motor magnetic disk on the nozzle side cascade control 2 core cable robot interface Gasinjection system

9 injection moulding tools for the production of rollers - along with a wide range of accessories As a result of a restructuring of our customer, we offer for sale 9 injection molds for the production of various types of castors for furniture and chair castors, including customer addresses. The pictures represent the basic nature of the different roles. These injection molds could be used to set up a complete production facility for the production of rolls. The basic body of the castors can then be supplemented with various inserts (depending on the customer's requirements) for final attachment to the end product, e.g. a chair. This offer also includes the following accessories - which are part of the production process: • 1 x punching tool (for the roller roller) • 1 x press (for pressing the pins and shafts) • 1 x automatic assembly machine for spring washers � ...

Arburg 520C 1500 800 injection molding machine year 2005 Can be seen upstream

Plastak HR8 8 stations, for injected leather In working order and with the possibility of seeing it in operation

The injection molding machine is fully operational, it is constantly used on the production line. The price is without peripherals - plastic haul and picker. Working hours approx. 35,000 h.

NEGRI-BOSSI NBV 160/375 N72-690 machine The machine, connected, is working. In good condition Year of production: 2003 For sale immediately. Possibility to view and start the machine. The last service inspection of the machine: 07/2020