pet bottle filling used for sale

1 of used level detector for bottles, make Heuft, type Basic HF-LT, new 2005. Over-/under-fill detection via high-frequency, optical closure and excessive closure height detection, "mono" pneumatic rejector, encoder. Rated at 22.000 bph.

Bottle cleaning machine Einend Manufacturer: O+H, KHS Type: Contina D 777 / 420 / 500 - 95, Built: 1989, Power: 65,000 Fl/h, Bottle size: 56- 89 mm, length 240 -285 mm. Overhauled, with warranty

Bottle cleaning machine One end Manufacturer: SEN, KHS Type: Riwella VB 12/11-2, Built: 1987, Power: 5700 Fl/h, Bottle size: 55- 92 mm, length 170- 360 mm. Overhauled, with warranty

Bottle cleaning machine Double-end Manufacturer: Krones, Type: Flamatic KDF 246-500-42-110 , Built: 1991, Power: 44,000 Fl/h, Bottle size: 56- 95 mm, length 240 -340 mm. Overhauled, with warranty

Make: Krones Type: TOPMATIC Built: 1996 Capacity: 55000 bottles/h Bottle size:: diameter adjustable, height 198 mm Bottle type: 0.5l glass bottle Labelling: 3 aggregates, abdomen, neck, back Machine division: 125 Number of bottle plates: 45 Used manual grease lubrication Paper label with wet glue Label control Centro Automatic performance adjustment

Welding bottle transport trolley m. Schläuc Messer Griesheim or other Transport trolley for welding bottles (acetylene and oxygen) Stable execution With welding hoses and pressure manometer

Glass bottle washer, MAG Schymanski Enomeco, year: 2000, complete stainless steel, Siemens S7, for 330 ml + 500 ml and 500 ml bottle with swing stopper clip lock, capacity up to 7,000 bph.

NERI SL 200 3T labeler, with 3 labeling heads for front, back and neck labeling with 3 label dispensers. Suitable for containers from 20 to 80mm diameter, label height from 10 to 120mm, label length from 13 to 190mm. Fitted with overhead container support. Output up to 100 containers per minute. Siemens S7-300 PLC controller with Simatic OP7 operator interface. All stainless steel construction.

Capacity: 50.000 bt. / h Currently equipped for 0.25l Vichy / 0.25l Gastro / 0.50l GdB / 0.70l GdB / 0.75l GdB / 0.75l Benelux / 0.75l Gastro Bottles. • Inspection of the mouth sealing surface • Inspection of the side wall (both sides) • Inspection of the thread • Detection of conductive residual liquids • Detection of residual liquids by IR • Diversion of faulty bottles • Diversion of bottles exceeding height and/or width as well as lying bottles Incl. module for detection of impact spots Incl. blower for removal of water drops

New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.

capacity: up to 11,000 bottles/h suitable for 0.2 to 1.0 ltr. bottles year of manufacturing: 1990 partly dismantled for reconditioning

Used Heuft Empty Bottle Inspector InLine IXs reflexx Device No. 2ZG044698 Condition: very good, ready for use at short notice ·       Commissioning 6 May 2012 ·       Upgrade for later integration of additional ground control using X-ray technology ·       Tape control Heuft Synchronous TX ·       Network Heuft Hlan ·       Haylofts two ways discharge with div. Heuft container transport Convejor ·       Troubleshooting Software Wizard ·       Software assistant guided instructions for the different container changes ·       Power max. 46,000 fl./h ·       5 Variety licenses incl. scope of delivery: ·       Belt control Spectrum TX ·       Measuring bridges for inlet control and discharges incl. height connections ·       2 x Discharge Delta K  ...

Used Heuft Glass Empty Bottle Inspector InLine reflexx Device No. 2ZG042943 Condition: very good, ready for use at short notice ·       Original delivery date 12.2011 ·       Power max. 46,000 fl./h ·       Pass direction from left to right ·       Two triggers ·       Secomak blower instead of compressed air ·       Transponder detection for RFID test bottles ·       Discharge monitoring ·       Network Heuft Hlan (Upgrade Optional) ·       Hayt two ways discharge Delta K to the right ·       4 Variety Licenses ·       Tripartite Delta K for band height of 1130 ·       Two fluids for lye detection Not available! ·       inlet control, must be supplemented if necessary ·       Thread edging, must be supplemented if required ·       The documentation is complet ...

PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...

SLEEVE APPLICATOR CLEVER GS 602. performance on PET/Glass bottles: 45000 b/h : 0,4-0,5 L 24000 b/h : 1,5 L 22000 b/h : 2 L

Dr. Junghans Medical hot water bottles 7,300 pieces, each with a volume of 0.6 litres, with or without cover - new in original packaging - are offered as follows: 1) 1,600 hot water bottles 0.6 litres, without cover, REF 10128, LOT 43946 2) 2,900 hot water bottles 0.6 litres, with cover red, REF 12128, LOT 43946 3) 2,800 hot water bottles 0.6 litres, with cover blue, REF 13128, LOT 43946 The hot water bottles come from an overstock at our customer. Single item sales from 1000 pieces would be possible by arrangement. The hot water bottles are still in our customer's factory near Leipzig (Saxony). The sale is carried out ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are to be understood as gross prices in EURO ex works. The offers are s ...

Crane block, crane hook, load hook pulley, rope pulley, steel rope pulley, rope pulley, crane -Payload: 1000 kg -Dimensions: 4650/210/H90 mm -Own weight: 9 kg

Sidel Flexible SL90 F8564T/Sm with Cold Glue 8/8/130 S3/E3 Equipped with 3 Cold Glue Modules for front and back body and neck labels on round glass bottles. Bottle min/max height: 150 / 350 mm Bottle min/max diameter: 50 / 100mm Label min/max height: 20 / 120 mm Label min/max length: 20 / 130 mm Speed- Machine will run comfortably 36,000 BPH @ 330ml on Cold Glue . (max speed 72,000)

Press form Bottle 25 ml (bottle used in the medical industry)

Press form Bottle 100 mm, D=20 mm round, used in the medical industry, wear 10%

Press form Bottle FP-50 flat, used in the medical industry, Wear 5%, 5-cavity mold

Manufacturer: Procomac Model:Rinser Gripstar Speed:3500 bottles/h Equipment in Working Conditions Safety Sytems: Yes Technical Documentation: Available

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

Industrial inkjet printer VideoJet Excel 170i For printing labels, bottles, packaging, etc.: prints only in black colour, incl. mobile frame, light scanner and rotary pulse encoder for optimal speed adjustment

year of manufacturing: 1996 with 10 bottles/row capacity: 1.600 - 3.600 bph gas directly heated (on request the gas burner can be changed for an oil burner against charge) incl. automatic label discharge stainless steel water baths completely reconditioned incl. new main chain and new bottle cells

Krones Used Bottle Washer 1992 [...for more information send your inquiry to the seller.] refno: LV36

with 12 bottles/row cell pitch: 110 mm capacity: approx. 2,000 - 2,500 fl./h Oil-direct heated including oil burner

Bottle turner,Condition,for mounting on band with separate control panel

Krones EBI empty bottle Inspector along with contour detection module and ejector tables Krones bottle inspector along with contour detection module: • Type: Krones Linatronic • Production year: 2012 • Capacity: 60 000 bottle/hours • Work direction: form left to right Possible detections: • Rest of the liquid (infrared) • Double control of residual soda (high frequency) • Neck damage control • Sidewall control modules • Damaged bottles discard • Separate rejection of dirty bottles • Detection of the contour of the bottle • Detection of the color of bottle • Separate rejection of a bottle with wrong contour or color The system includes: • KRONES Linatronic Inspector • Contour detection module • Ejection table behind the Inspctor • Ejection table behind the contour detection module

An inspection system for bottle label control is offered, Throughput 30,000 Fl/h With 3 Kamaras and control

Specifications: - 2 recording stations with safety chain - Bottle diameter up to approx. 250 mm - straight + inclined bottle position - Load capacity approx. 200 kg - Wheel diameter 380 mm - Space requirement approx. W 800 x D 1000 x H 1250 mm - Weight approx. 40 kg

Bottle washing machine, Fabr. Klinger, for 4,000 fl/h, 10 fl/row, with 110 mm bottle cells, run on VDF bottles 0.25 lt, 0.75 lt and 1.0 lt, Steam connection 3 bar L: 7,700 mm, W: 2,700 mm, H: 2,700 mm Price on request

load 1.000 - 2.000,-kg. More then 300 machines new and second hand on our seema .de

Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!

Formats: 0.25/ 0.35/ 1l, conneced load: 2.5kW.

With inlet control, base inspection, mouth surface inspection, 270° side wall and residual liquid inspection, for glass and PET bottles, machine needs overhauling.

Output: 36,000 bottles/h, format: NRW white/ GDB 0.7l/ GDB 0.75l green/ Longneck 0.33l KK/ 1.0l Individual, with spare parts, double side wall, thread, neck finish, 2x residual liquid, base and automatic test bottle request, has been serviced regularly, inspection is possiblem, but not under power.

Max. output: 30,000 bottles/h, format: 0.33/ 0.5l.

Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021.

PET bottle unscrambler– AVE • Year: 1997 • Speed: 6.000 bph • Safety protections.

With inlet control, base inspection, mouth surface inspection, 270° side wall and residual liquid inspection.

There are four HEUFT inspectors available (1) empty container inspector with rejection (2) empty container inspector (3) logo detection with rejection (4) empty bottle inspector with reject table and rejections (5) belts and belt control with the complete motors.

Compressed air supply: 6-10bar, connected load: 7400VA, inspector is designed for 33cl and 50cl longneck bottles.

Output: 39,600/h, additional accessories are available.

With documentation and pusher, has been regularly serviced, operating hours: 23,476h, the machine has already been dismantled.

Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request

Inspector, Fabr. Nail, Type: NAG, Type: Full inspection 5/8, up to 5,000 fl/h, furnished on 0.33 lt BV-Maurer + 1.0 lt bracket, KK 0.33 lt Gourmet, KK 0.5 lt NRW + EURO, running direction re->li for floor, muzzle, sidewall and lye control with new card for side control serviced annually

Bottle washer Machine No: 450.0017.5 Year: 1994 Capacity:13500 bottles/h

Labeling machine with spare parts. The machines and parts are in very good condition. It consists of 4 labeling stations. 1 Station is used for cold glue labels 2 Stations are used for sticker labels 1 Station is used for tax label/banderole The labeling speed is 20,000 bottles/hour. Manufacturer: Krones Model: Solomatic Year of construction: 2006 Labelling machine with spare parts. The machinery and the parts are in very good condition.  It consists of 4 labelling stations.  1 Station is used for cold glue labels  2 Stations are used for sticker labels  1 Station is used for tax label/Banderrolle The labelling speed is 20,000 bph. Manufacturer: Krones Model: Solomatic Manufactured in: 2006

capacity: up to 7,000 fl./h format parts: for 500 ml and 1,500 ml PET bottles with bottle silo and bottle feeding system with Siemens Elektrik