pet bottle filling used for sale

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Original Molds for SIDEL SBO 10 totally 12 sets, year 2017 JADE has 12 sets of 10+1 pc PET bottle blow molder aluminum molds for sale, all made by SIDEL France in year 2017. Molds were used in SIDEL SBO 10 blow molder with energy saving air recovery system type SIDEL AirEco. Molds are for PET bottles from 250 ml to 2.0 liters with neck standard PCO 1881 (short neck) product being still and sparkling water. This SBO 10 was operated only 16 months (with 12 sets of molds) and thus molds are in excellent condition. Delivery will include also standalone shelves for holding the moulds safely in production and two sets of stretch rods

Output infinitely adjustable up to 7000 bottles/hour. Number of screw heads 8 pcs. Installed power 1.68 kW Supply voltage 220/380 V; 60 Hz Compressed air requirement 0.3 m 3 Compressed air operating pressure max. 0.6 MPa Overall dimensions (length x width x height) 1450x950x2800 mm Weight 600 kg

USED KRONES GLASS BOTTLE FILLING LINE Item #: Usm-185 Category PET Filling Lines We Sell Glass bottle Line KRONES monoblock 1-KRONES monoblock - vacuum filler 4000 LPH, capping machine Al cap MCA 28, exclusively for still drinks (juices, syrups, alcohol) -relatively few hours of operation, control unit replaced -accessible accessories for glass bottle 200ml, 700ml & 1000ml 2-KRONES Binetta labeling machine, one label (possible and neck), 0,2 – 1 l volume. -accessible accessories 3-RINSER for glass bottles 4-Some conveyor belts. 5-Sleeve Machine, Sleeve Machine with electric tunnel Condition: Very good condition. All caracteristics you can see on pictures

Used Used Filling Monoblock PET Procomac 100.20: Year: 1993 Condition: Good Used Filling Monoblock PET Procomac 100.20: Model: FILLSTAR 100 ? 20 ultraclean Year: 1993 ? Completely overhauled in 2015 with new electrical system Speed: 20.000 BPH with 1.5 lt bottles Clockwise direction FILLER 100 valves Filling type: isobaric Valve type: mechanical Valve functions: degassing and sanitization CAPPER 20 correct Type of cap: pre-threaded PCO plastic Distribution system: pick & place GENERAL DATA Available formats 25cl and 100 cl Pressurized cabin with EPA filtration system Automatic system for external washing of filling valves Safety protections Code: 731 Code: QT 731 More details: https://bottlingscout.com

Complete PET Filling Line – Krones AG ERGOBLOC – 1.5 L – 32,000 BPH – Non-Carbonated Products – YOM 2006 For sale is a complete PET bottling and packaging line for still water and non-carbonated beverages, built around a Krones ERGOBLOC system. The line has a capacity of up to 32,000 bottles per hour (BPH) for 1.5 liter PET bottles with 28 mm or 32 mm caps. The equipment is suitable for still water and other non-carbonated beverages only. The line includes the full process from preform feeding, blowing, filling and capping to labeling, packing and palletizing, making it a complete turnkey solution for PET bottle production and packaging. General Information Manufacturer: Krones AG System: ERGOBLOC PET filling line Bottle Size: 1.5 L PET Capacity: approx. 32,000 bottles/hour Cap Size: 28 / 32 mm Products: Non-carbonated beverages (still water) Year of Manufactur ...

Used Used Filling Monoblock PET Krones Modulfill 43.000 bph: Year: 2012 Condition: As Is Production Capacity 43,200 bottles per hour on 330 ml format Designed for speeds up to 50,000 bottles per hour Bottle Format 330 ml Filling Technology Isobarometric filling system Neck Finish Compatibility Crown caps Twist-off caps Machine Configuration 144 filling valves 24 closing heads Machine pitch: 95 mm Operating Hours 48,121 working hours Overall Dimensions Approx. 12 m ? 8 m Code: BQ 02 More details: https://bottlingscout.com

Bottle Leak Detection System – WILCO Wilcomat R18 SQ/FS High-performance bottle leak detection system designed for quality control in beverage and liquid packaging lines. The WILCO Wilcomat R18 SQ/FS ensures reliable inspection of bottles to detect leaks and maintain product integrity during high-speed production. General Information - Manufacturer: WILCO - Model: Wilcomat R18 SQ/FS - Year of Manufacture: 2006 Technical Specifications - Production Capacity: 35,000 bottles per hour Application - The system is designed for automatic leak detection of bottles in high-speed packaging lines, ensuring that only properly sealed containers continue through the production process. Typical applications include: - Bottled water - Soft drinks - Dairy beverages - Juices and other liquid products Key Advantages - Reliable WILCO leak detection technology - Suitable for hi ...

WINE BOTTLING LINE 4.000 BOTTLES/HOUR - 28-station rinser - 28-valve filler - Corking machine with 6 heads - Bottle: Glass - Speed: 4.000 bottles/hour of 0,75l Find more here - / Contact us at -

System Description Partial automated sorting system for returnable beverage crates and EPS foldable trays. Incoming returnable containers arrive mainly on Euro and half pallets and must be manually unloaded due to mixed crate types. Additional quantities arrive in roll containers. Main Functions - Identification and sorting of various returnable crate types - Deposit value calculation per crate based on pallet barcode - Sorting of bottles into 20-unit and 24-unit module crates - Automatic unpacking of EPS trays with bottles using Inlet systems - Handling of up to 440 crate types - Sorting of standing bottles inside EPS trays with Inlets - Allocation of sorted crates for automated palletizing or manual handling Capacity and Performance - Total annual throughput: 6.5 million crates - Operation: 2 shifts per day, 5 days per week - Average throughput: 1,625 crates per hour - Peak throug ...

AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...

Used Used Bottle-Washer MPF 2017: Year: 2017 Condition: Good Used Bottle-Washer MPF 2017: Year: 2017 Speed: 8.000 Bph Model: LAVATRICE Function: External washing Safety protections Code: M 62 More details: https://bottlingscout.com

Used Used Bottle Inspector Heuft inline reflexx 72.000 bph: Year: 2009 Condition: Good Used Bottle Inspector Heuft: Model: Inline reflexx release 9 HBBIRTIXX Year: 2009 Speed: 72.000 bph Camera inspection type ccd High-frequency and infrared sensors are used for the detection of liquid residues Type of control: Empty glass bottles Inspection of: ? Side walls (inlet and outlet) ? neck ? thread ? bottom Residual liquid detection (IR/HF) Additional exit recognition for any remaining labels in the package area Bottle Recognition Test PRESELECTION SYSTEM HEUFT Model: spectrum SX TB 72 Type: Bottle shape and height GENERAL DATA Machinery layout Safety protections Code: ZZ 48 More details: https://bottlingscout.com

Used Used Bottle inspector Heuft Reflexx GJ 25.000 bph: Year: 2004 Condition: Good Used Bottle inspector Heuft Reflexx GJ 25.000 bph: Model: REFLEXX GJ Year: 2004 Speed: 25.000 BPH Type of inspection: Cameras, infrared and High Frequency Type of control: ? Empty bottles Bottom, fillet, mouth e walls Safety protections Code: ZZ 47 More details: https://bottlingscout.com

Used Used Bottle inspector FT SYSTEM CL 600 ? HF: Year: 2006 Condition: Good Used Bottle inspector FT SYSTEM CL 600 ? HF: Model: CL 600 ? HF Year: 2006 Speed: 25,000 BPH with 0.5 l bottles Direction: from left to right Type of inspection: x-ray Type of control: full bottles ? filling level; ? presence of cap Possibility of connecting by encoder to filler and capper to identify the filling valve or the malfunctioning capping head Code: ZZ 46 More details: https://bottlingscout.com

Qty. 1 Second-hand bottle filling line Mfc.: KHS, Siemens (SSW), Krones, Uni-Mac, Rink, MIHO etc. Built: 1986 – 2015 Capacity: 24 000 Bottles/h

We are offering for sale a packaging line , which remains in operation until June 2025. The line is designed for repacking 0.33L / 0.5L glass bottles into: - 6-pack open baskets - Quill boxes and dollies (SRP system Logipack, roller pallet) Output: 9,000 bottles per hour (bph) Condition: Fully functional and well maintained 1.Robot Cell Unloader PROFIROB-O-BOX A4/180 Type: MOTOMAN MH 180 II (6 axes) Commissioned: 02.01.2017 Manufacturer: Yaskawa / Profipack Year Built: 2016 2.Robot Cell Loader PROFIROB-O-BOX A4/180 Type: MOTOMAN MH 180 II (6 axes) Commissioned: 02.01.2017 Manufacturer: Yaskawa / Profipack Year Built: 2016 3.Bottle Carrier Uprighter Type: FTA-6/4-Z1-G5 Commissioned: 02.01.2017 Manufacturer: DokuConsult KG Year Built: 2016 4.Pallet Magazine Type: Typ 454 Modell LPMH Commissioned: KW 13 / 2002 Manufacturer: Krones Year Built: 2002 5.Deck Tray Insert ...

Output: 9000 U/h // Bottle Size: 200ml-2l

Used Used Bottle-Heaters cames IR 10: Year: 2015 Condition: Good Used Bottle-Heaters cames IR 10: Speed: 3.000 bph. Year: 2015. Model: IR 10 Heating system with infrared lamps Safety protections. Code: M 11 More details: https://bottlingscout.com

2 LITRE PET LINE at 10,500 BPH KRONES BLOC WITH IPANEL (Yr 2010) - 70 FILLING HEADS- 12,500 BPH MAX SPEED SIDEL SBO8 BLOW MOULDING AIRVEYOR COOLING CONVEYOR KRONES AIRCO INFEED CONVEYOR KRONES CARBONATOR (2010) HEUFT INSPECTION (2012) KRONES CONTIROLL LABELLER (2012) SMI DIVIPACK & SMI OVERWRAPPER KHS HANDLE ATTACHMENT LOGOPACK PACK LABELLING ACMI PACK SORTING & ROBOT PALLETISING FANUS PACK HANDLING ROBOT TOSA PALLET WRAPPER LOCATION: UK The line is installed in the factory and inspections are most welcome. The machinery is in good working condition and ready for engineering removal. We can provide the full installation service if required. Please contact Indassol today for a quote!

5 LITRE PET LINE - 2,000 BPH Sidel ‘SB02F’ Rotary Blow Moulder, M08 neck finish, Sidel Preform Hopper and Feeder Elevator with Sidel Preform Unscrambler Air Conveyor System with swan neck elevator and lowerator AVE 15 Valve Filler and 4 Head Capper with cap hopper and elevator (2004) Comag ‘PLH2500’ Neck Handle Applicator (2008) Harlands 155WS RC Inline Labeller (2010) Smipack ‘BP700AR’ Shrink Wrapper (2006) Smipack ‘T650’ Conveyorised Heat Tunnel (2007) Logopack ‘410IIIF’ Pack Labeller (2015) Lita ‘Eco’ Palletising System comprising of infeed metal roller conveyor, Lita pack stacker with carboard tray insertion, pallet infeed and outfeed system TOSA ‘85’ Rotary Pallet Wrapper, Type AV5866 and outfeed station Location: UK This 5 Litre PET line is in good working order, and inspection in the factory is most welcome.  ...

Still Water PET Bottling Line – 16,000 BPH (2018) Complete still water bottling line designed for high-efficiency production of small-format PET bottles with thermoseal lids. The line is suitable for filling 100 ml, 150 ml, and 200 ml PET bottles and includes blow molding, filling, sealing, labeling, packing, palletizing, and wrapping equipment. General Information - Application: Still / non-carbonated water - Bottle Material: PET bottles with thermoseal lid - Output Capacity: 16,000 bottles per hour - Bottle Sizes: 100 ml, 150 ml, 200 ml - Year of Manufacturing: 2018 Production Configuration - Combi Machines: 2 units (Blow Moulder + Filler + Sealer) - Machine Speed: 8,000 BPH each - Preform Type: Flat Neck – 6.39 g - Sealing System: Thermoseal neck Filling and Sealing Stations - Filling Station: Two-step system with two stations - Each station equipped with 8  ...

Qty. 1 Second-hand PET complete filling line Mfc.: SIPA, Melegari, Dimac and ABB Built: 2005 - 2019 Products: CSD and Water, with or without CO2 Capacity: 12’000 bph in 950 and1500 ml PET Neck format PCO 1881 (short cap) Scope of supply: Blow Moulders Air Conveyors Filler Capper Monobloc Filling Level & Cap Inspector Labeller Shrink Wrapper Package Handel Applicator Palletiser Pallet Wrapper

Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...

Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...

High Pressure Compressor – LMF Eco PET VD 1350-B 40 Bar PET Air Compressor | Year 2003 | Available from Stock in Germany High-performance LMF high pressure compressor designed for PET bottle blowing applications and other industrial processes requiring high-pressure compressed air. The unit is equipped with a Siemens S7 PLC control system and Danfoss frequency drive, ensuring reliable operation and efficient performance. The compressor is already dismantled and available from stock in Germany, enabling quick delivery and installation. General Specifications Manufacturer: LMF Model / Type: Eco PET VD 1350-B Year of Manufacturing: 2003 Capacity: 1,350 m³/h Maximum pressure: 42 bar Operating pressure: 40 bar Electric Power: 243 kW Working Hours: approx. 35,800 h Control & Drive System PLC: Siemens S7 Frequency Drive: Danfoss These component ...

Filter Petrodiesel Part number: 60502-12S-0005

Krauss Maffei PET Machine with Milk neck finish mold 27.5G 48cav 450-4500 CS PET 450Ton year 2010 Mold 27.5Grams 38mm Milk neck finish (requires attention) 48 cavities 25sec cycle Can be inspected

Key data: 3000 kN, 3268 g/PS, 100 mm

LX300 PET P100/120 E100 in production 48 cavities year 1996 exworks south america Auxiliaries included Plastic Systems resin dryer model DR224HT Throughput 800 kg/h Silo capacity 7 ton Radial vacuum pump Mold dehumidifier Piovan model RPA 2400 Conveying system TEC 24X2X10.4

Format: 16 x 33 x 0.8 mm Model MHUD-PET 2500 Pieces / Box 3 boxes in stock

Key data: 3000 kN, 3268 g/PS, 100 mm

GL300 PET P100/120 E100 in production running 72cav molds exworks south america 1997 auxiliaries Pet resin dryer Moretto DP311 model DP 311HT-CC'S Throughput 550 kg/h silo capacity 3.5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems NSC-NP

Key data: 3000 kN, 3268 g/PS, 120 mm

GL300 PET P100/120 E120 in production running 72cav molds exworks south america 1998 auxiliaries Pet resin dryer Plastic Systems DR218HT Throughput 550 kg/h silo capacity 4Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system Plastic Systems Plastic Systems P+D8:J55SNC 9

Key data: 3000 kN, 2746 g/PS, 120 mm

GL300 PET P100/110 E120 in production running 72cav molds exworks south america 2002 auxiliaries Pet resin dryer Piovan DS528 Throughput 650 kg/h silo capacity 5Ton radial vacuum pump mold dehumidifier Plastics Systems DSH2400 conveying system TEC - 24X2X10.5

Quality goods from German brand manufacturer OBECK Product: Can: Material: PET (polyethylene terephthalate) Color: White Volume: 400 ml Diameter: 93 mm (SP400) Height: 81 mm Weight: 36 g Food safe & recyclable Lid: Type: Screw Cap (Smooth 89SP400) Material: PP (polypropylene) Color: Black Height: 14 mm Uses: ✅ Food packaging (spices, nuts, protein powder) ✅ Cosmetic products (creams, lotions, masks) ✅ Dietary supplements (capsules, powders) ✅ Industrial supplies (chemicals, paints, adhesives) Prices: (Prices per can and lid combined) 2880 - €0.35 5760 - €0.32 11520 - €0.30 €20,160 - €0.26 48.960 - 0,22 € €100,800 - €0.20 400.320 - 0,18 € Minimum order: 2880 pieces (2 pallets) Location: Greven Shipping: Forwarding or self-collection (by arrangement) Quick to sell – We need space and are much cheaper than the m ...

Qty. 1 Second-hand PET – CSD bottle filling line Mfc.: H+E Maschinenbau, MTA SpA, ABM, Posimat, Sacmi Filling, Bertolaso, JAKU/JB Michiels, KRONES AG, SMI SpA, Robopac SpA Built: 1992 - 2023 Capacity: 6,000 bph Products: CSD - PET Neck finish: PCO 1881 Format available: 0.5 L

Injection moulding machine for PET preforms

PET Coextrusion + Inline ILLIG RDKP72g Thermoforming Line, Age 2010, this equipment is suitable for PET, PP & PS Trays, Fruit & Vegetable baskets etc. :-, Inline S Plastic SRL PET Coextrusion line to produce pet sheet in-line with ILLIG RDKP72g 4-Station Thermoformer (.samplastco. hole punch station) Age 2010 :, Maximum output 680 kg/ hr, Maximum sheet width 800 mm, The line includes:, Electrical Control Panel, MSM Plastic Engineering Gravimetric Feeder, fed directly from the PET Dryer + additional Component for masterbatch or additive, Main extruder Model ED 100-40 dia. Ø100 mm, L/D 40, BP Plast BDO X2 100 Double plate hydraulic screen changer, MAAG Gear pump, Co-extruder Model E60-40 dia. Ø60 mm, L/D 40 with Gravimetric feeder, BP Plast Single plate hydraulic screen changer, MAAG Gear pump, 3- Layer (ABA) Melt Feed Adapter, Special extrusion die for PET, width 900 mm, 3-Roll Polished ...

Used Used Presses Preform PET ENGEL 2004: Year: 2004 Condition: Good Used Presses Preform PET ENGEL: Model: MacPET 4550-320 maszyna nr 52890 Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 111 More details: https://bottlingscout.com

Used Used PET Prefom Presses Husky 2010: Year: 2010 Condition: Good Used PET Prefom Presses Husky: Model: HyPET300 HPP P100/110E 120-hpp 26 Year: 2010 Speed: preform 11,4g ca 39.800 pcs/hrs preform 13,0g ca 38.100 pcs/hrs Number of molds: 72 Code: W 109 More details: https://bottlingscout.com

Used Used PET Preform ENGEL 21.900 pz/h: Year: 2004 Condition: Good Used PET Preform ENGEL: Model: MacPET 4550-320 maszyna nr 52892 Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 110 More details: https://bottlingscout.com

Eurolux - Pressure Filler for PET - bottles 12 stations with dosing pump – Capacity: up to 650 bottles/h - NEW Technical data: - Capacity 0,5l; 1,0l; 1,5l : to 650 bottles/h – for PET bottles for syrup, water, drinks with / without gas - Installed power 0,37 kW - Weight: 240 kg - Measurement: H x W x D: 200 x 1150 x 1100 mm - With 12 stations - With dosing pump - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A - Handling 1 Person - semiautomatic Operating Manual and Spare Parts List available. All prices are valid Ex-Works, excl. VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

Used Stork monoblock. 32 fillers and 8 screw heads. For PET bottles. Dose adjustment on the pistons.

This line is an automatic filling line for bottles with Ø 38 mm wide mouth neck including aseptic filler, filling height control unit, labeling, foil shrinking, handle applicator and conveyor system used in the PET bottling for still and cold products like milk or juice.

Filling and closing Bloc BKM type: Varifill VF 32/8 PET with 32 filling valves and 8 head plastic screw capper with pick-and-place system year of manufacture: 2001 with Siemens S7 electric incl. Touch Panel with neck-handling system

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

1 aseptic filling Krones PET bottle filling line for bottles with a capacity of 1,500 ml, capacity 20,000 pieces/hour Year of construction 2005, No. 564-045 With sterile tank, capacity 7,500 l with sleever machine on the 1st floor above with Krones bottle cap conveyor. with Krones labeller, built in 2005 with various spare parts, but without PET blow bottles technology and without PTT bottles carton packing machine

Quality goods from German brand manufacturer OBECK Product: Can: Material: PET (polyethylene terephthalate) Color: White Volume: 400 ml Diameter: 93 mm (SP400) Height: 81 mm Weight: 36 g Food safe & recyclable Lid: Type: Screw Cap (Smooth 89SP400) Material: PP (polypropylene) Color: Black Height: 14 mm Uses: ✅ Food packaging (spices, nuts, protein powder) ✅ Cosmetic products (creams, lotions, masks) ✅ Dietary supplements (capsules, powders) ✅ Industrial supplies (chemicals, paints, adhesives) (Prices per can and lid combined) 2880 - €0.35 5760 - €0.32 11520 - €0.30 €20,160 - €0.26 48.960 - 0,22 € €100,800 - €0.20 400.320 - 0,18 € Minimum order: 2880 pieces (2 pallets) Location: Greven Shipping: Forwarding or self-collection (by arrangement) Quick to sell – We need space and are much cheaper than the manufact ...

Complete line for filling cans Very good condition! We have used the plant for dry pipe tobacco. It can be used for all free-flowing products, such as spices, nuts, seeds, gummy bears and many other types of food. All components of the system are coordinated by an experienced team and were used as a complete line. If you want to fill easily free-flowing product into cans or even first into bags and then into cans (both possible), then this is the perfect system for you. The system can be filled into tubular bags as well as directly into cans. The entire plant has a capacity of 30 cans/minute. Some components of the system, such as the capper and the labeller, even have a significantly higher capacity. Adapted for 400 ml cans, we used Obeck and Polipack and both ran perfectly. Other can formats are possible, but the system can be adapted (extra costs apply). The facil ...

This aseptic Krones line from 2015 offers a state-of-the-art solution for the aseptic filling of sensitive, non-carbonated products such as juice, tea and dairy products. With an impressive output of 18,000 bottles per hour with a bottle volume of 1 liter, this complete line ensures maximum efficiency and productivity while maintaining product quality. Thanks to the dry aseptic technology (dry), the line not only guarantees the highest hygienic standards, but also saves valuable resources such as water and cleaning agents, which makes it particularly environmentally friendly. The line is specially designed for use with PET bottles and offers flexibility in processing different types of closures: flat caps (PCO 1810) with a diameter of 38 mm and 28 mm. As part of Krones' portfolio, this line combines state-of-the-art technology with robust, durable processing to ensure reliable, ase ...

This complete KHS Krones aseptic line from 2005 is specially designed for safe and Hygienic filling of beverages into PET bottles. It offers a fully aseptic process that is suitable for ensures maximum product safety and extended shelf life. The system is suitable for both still and carbonated soft drinks. carbonated soft drinks, with a capacity of 30,000 bph for 0.5l bottles. It supports flat caps with a size of 28 mm (PCO1810) and 38 mm DS 38/15 2T SFB CA (3504). It also allows the use of sleeve labels. The combination of cutting-edge technology and precise control makes this line the ideal choice for manufacturers who value quality and efficiency.