pet blowing moulding used for sale

Output (caps/min): 1500

Head type: 3-SH/60-125-PE/T (DeCo) ​Marke/ Brand: UES Condition: New/ New Layers : 2 Center distance: 125 mm Nozzle/ Die: 60 mm Hoses/ Parisons: 3 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Key data: 3200 mm, 287 , 50

Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only

Head type: 2-BKD-51-125 (A 70) ​Marke/ Brand: Bekum Overhauled: Yes/ Yes Layers : 1 Center-distance: 125 mm Nozzle/ Die: 51 mm Hoses/ Parisons: 2 ​Material/ Material: HD(PE), PP WBK/ WTC: Yes/ Yes View stripe: No/ No

Well maintained machines. Extruder 50/20D. Double head 100 mm stitch.

Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

Two-station machine for articles up to 5 ltr. Extruder 90/24D, quadruple head 4 x 45 mm center to center. Clamping force 83 kN. 460V 60 Hz Good condition

Single-station machine for articles up to 5 ltr. Extruder 80/24D, double head 160 mm center to center. Trim cutting in the machine. 460V 60 Hz Good condition

HM501, 3-fold head stitch 70. New Beckhoff PLC (Retrofit 2021)

HS451, YOC 1993, Retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. – Brand: Thyssen Nothelfer – Year built: 1996 – Max. tube Ø: 500mm

Two-station machine for stacking canisters up to 10 ltr. Year of construction 2000. With PWDS and SFDR. Clamping force 200 kN. With aftercooling stations and needle bubbles. Also included is the conveyor belt for canisters. Good condition

This Krauss Maffei 80-340 C2 was manufactured in 1998. It features a MC3F controller, Euromap Interface 12, and hydraulic and air units. With a screw diameter of 35 mm, it offers a maximum pressure of 2156 bar and an injection volume of 156 cm³. Consider the opportunity to buy this Krauss Maffei 80-340 C2 hydraulic injection moulding machine. Contact us for more information.

Vacuum coating system with UV dryer/hardener Manufacturer: Giardina Year of construction: 1998 Paint shop Model: MCD/5 UV Dryer Model: SPC/12

Single-station machine for items up to 10 ltr. Extruder 6+0/20D. Single head, capped separator. Waste die-cutter. At call

Manufacturer | manufacturer: Hesta Machine Type | machine type: HM 501 Stations | stations: Single Station | Single station Year of construction | Built: 1993 Location | location: UES Clamping force | Clamping force: 40 kN Control Type | control system: Original Hesta Extruder | Extruder: 50/22D Extrusion Head | Extrusion Head: 2-fold head 100mm | Double head 100mm Mold dimensions mm | mold dimensions mm (A length / length x B Breite / width x C Tief/depth): Bottle Volume Max. | bottle volume max.: 2 L Screen Language | monitor language: German / English | German / English Delivery Time | Delivery time: 1 - 3 weeks | 1 - 3 weeks

used double head, with WDS adjustment, in good condition. 125 mm center to center, die dia up to 55 mm.

Inv. Num. : 5875 Type: KM 300-1400 C1 Producer: Krauss Maffei Created: 2001 Parameters: Laser ON: 70,000 h Clamping force: 300 t Screw diameter: 60 mm Injection capacity: 679 cm³ Injection mass: 618 g Min. height of clamping plate: 995 mm Min. width of clamping plate: 1050 mm Distance between uprights (horizontal): 630 mm Distance between uprights (vertical): 630 mm Ejector stroke length: 200 mm Maximum spraying pressure: 2000 bar Pump power: 45 kW Opening the mold: 820 mm Machine length: 6000 mm Machine width: 2100 mm Machine height: 2400 mm Injection weight: 12,500 kg Equipment: Robot Getecha Aschaffenburg GL 5 (built in 2001)

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

10 and 20 ltr for sale. Closure 61 mm

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Year of construction: 1991 with double head 70 mm stitch Clamping force: 18 kN Machine is in good condition, and has few operating hours

Year of construction 1982 for bottles up to 1.5 litres Cylinder has a 50 mm screw, The machine will be sold without blow head Good Condition, still under power!

Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

HS451, built in 1993, retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

HW551, Extruder 55mm HDPE Single Head Up to 300cm3

HS451, built in 1993, Available with 1-fold/2-fold head/3-fold Optionally retrofit to PLC and E-extruder

Moulding machine Ital Form Made of duralumin and steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form Completely made of stainless steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form 4 cylinders Rollers 500 mm long Dimensions: 850x1200x1150mm Electric power: 0.75kW Weight: 170 kg

For containers up to 30 ltr. Continuous extrusion. Clamping force 30 tons. With waste punch and handover

Single-station machine for containers up to 1 ltr. Extruder S 50/20D. Single head, programmed. 380V 50 Hz. Available now!

Block moulding machine with mixing plant for sale. The board paver of the manufacturer Zenith, type 860 AZ, built in 1988, has been in continuous operation at the same location. In addition to the stone paver, the entire production circuit and a production circuit and a complete mixing plant with 3 TEKA mixers (2x THZ1875 and 1xTHZ1125), year of construction 1985. The plant can be fully used after acquisition. The stone paver is still in operation until at least the end of September 2023 and can be inspected in production until then. Stone moulding machine: - Board paver from the manufacturer Zenith, type 860 AZ, year of manufacture 1988. - Production of core and facing - Control Simatic S 5 with visualisation from Zenith - Board size 1,400 x 950 mm - Maximum production height 14 cm - Pneumatic mould clamping Find more here - / Contact us at -

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more

Manufacturer: ARBURG Model: ALLROUNDER 680 Year of Manufacture: 2016 Type of Machine: Injection Moulding Machine Electrical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: 230 V ~ / 24 V = - Motor/Heating Rated Current: 76 A / 18 A - Total Rated Current: 94 A - Total Connected Load: 56 kW Machine has already been dismantled Operating hours: à approx. 29,000 hours Find more here - / Contact us at -

Manufacturer: ARBURG Model: ALLROUNDER 680 Year of Manufacture: 2016 Type of Machine: Injection Moulding Machine Electrical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: 230 V ~ / 24 V = - Motor/Heating Rated Current: 76 A / 18 A - Total Rated Current: 94 A - Total Connected Load: 56 kW Machine has already been dismantled Operating hours: à approx. 29,000 hours Find more here - / Contact us at -

A Boy injection molding machine is available. Clamping force: 100kN, tie bar distance (diagonal): 205mm, max. platen distance: 250mm, ejector stroke: 50mm, screw diameter: 14mm, stroke volume range: 1cm³/15.3cm³, machine dimensions X/Y/Z: approx. 1500mm/550mm/1400mm, weight: approx. 500kg, control: Procan ALPHA. Documentation available. On-site inspection is possible.

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

A total of four Engel injection molding machines are available. 1) Engel ES 80/25 HL-V, year of manufacture: 1999, the machine is a defective spare parts carrier. 2) Engel ES 80/25 HL-V, year of manufacture: 2001. 3) Engel VC 200/45 Tech, year of manufacture: 2004. 4) Engel e-Motion 200/55, year of manufacture: 2005. Documentation available. On-site inspection is possible. Individual sale possible.

Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...

Clamping force: 350kN, tie bar distance: 280mm/280mm, platen dimensions X/Y: 410mm/410mm, min. mold installation height: 180mm, max. opening stroke: 350mm, max. platen distance: 530mm, screw diameter: 22mm, shot volume: 47.5cm³, shot weight (PS): 41g, injection pressure: 2440bar, control: NC4, heating power: 6.3kW. Machine dimensions X/Y/Z: approx. 3100mm/1100mm/1600mm, weight: approx. 1800kg. On-site inspection is possible.

Clamping force: 12,000kN, opening force: opening stroke: closing speed: 1030mm/s, max. mold weight: 22.5t, max. platen dimensions: 1900x1950mm, tie bar diameter: 220mm, ejection force: 130kN, screw diameter: 133mm, injection pressure: 1445bar, width: 3500mm, length: 14,745mm, height: 2740mm. With documentation. On-site inspection is possible.

Bekum BA 52 Blow Moulding Machine Stations: Single Clamping Force: 450 kN Control: Original Bekum Extruder: S 701 Head: 6 Litre Accumulator-Head new Max. Bottle volume: 60 Litres Mold Dimensions (Length/Width/Depth):1200/750/2150-300 (mm)

Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible.

Clamping force: 2000kN, tie bar spacing: 520mm/520mm, platen dimensions X/Y: 715mm/715mm, min. mold installation height: 250mm, max. opening stroke: 650mm, ejector stroke: 225mm, ejector force: 66kN. Screw diameter: 55mm, injection weight: 240g, injection pressure: 2500bar, stroke volume: 286cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600mm/1700mm, weight: approx. 7000kg, operating hours: approx. 62144h. Documentation available. On-site inspection is possible. Expected to be available from June 2025.

A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.

Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible.