135,885 used machines on RESALE, but how to find them? Machine Search
Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.
Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...
Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK
Drives: 45 KW + 15 KW Weight: 2100 kg Dimensions: L 3.50 m x W 1.36 m x H 1.52 m;
GRANULATOR TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition incl. 3 sets of rotor knives and stator knives incl. 2 sets of screens, 5 and 8 mm IMMEDIATELY AVAILABLE AND READY FOR USE
Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.
Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.
Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg
Used mill / granulator made by Pallmann, type PS4 - 7.5. New 1972. Speed: Rotor 640
Granulator with rotor width 1000 mm, motor 37 kW, with hopper attachment and hydraulic feed slide. Knives resharpened and whole machine repainted. Very good condition. Optionally with total separator and fan for the regrind.
Refurbished plast agglomerator for sale. Trial run possible for a fee of 1500€. The fee will be charged at the time of purchase.
General SKU312X491 LocationBarneveld CEcheck MakePallmann Main Features Motor33 KW Inlet diameter120 mm Specified Features - Fine Impact Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeInner roter ø 396 mm: outer roter 400 mm With grinding trackConidur 1,5: 2: 3 Housing dimensions ø 800 mm Inletø 120 mm Motor22 kW 400 V, 1470 rpm: 11 kW 400 V, 1475 rpm SpeedInner rotor 3000 rpm, outer rotor 1500 rpm Fine Impact Mills MaterialStainless steel 1.4552 General TypePPS 4-120 No.139820170004 Year of construction2018 Mounted on framecheck Floor space0,9 x 2,8 m Total height1,5 m Weight1600 kgGeneric medicinesStarchFine Impact MillsAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberM ...
General SKU160P705 MakePallmann TypePP 4 No.0668145 Year of construction1968 LocationBarneveld Main Features Motor22.5 KW Inlet diameter155 mm Width100 mm Specified Features - Fine Impact Mill Turbo cone millcheck 2 Driven rotorsimpeller &: co-rotating baffle plate Rotor sizeInner roter ø 396 mm: Outer roter 400 mm Grinding room sizeø 600 Inlet155 x 100 mm Motor15 kW + 7,5 kW, 380 V SpeedMax. 4100 rpm: Grinding disc 1450 rpm Fine Impact Mills MaterialMild steel General With switchgear(as is) Floorspace2,1 x 1,1 m Total height0,8 mGeneric medicinesStarchFine Impact MillsAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicPowdered foodsPaints & coatingsConsumer ...
General SKU440X1396 LocationBarneveld MakePallmann TypePP-6 Material Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) Main Features MaterialMild steel Motor30 KW Specified Features - Miscellaneous Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeø 600 x 120 mm: ø 700 x 300 mm Grinding room sizeø 760 x 200 mm House jacketed2x Inlet190 x190 mm Feeding with vibro feeder(Not available but possible) Motor11 kW, 380 V, ± 1480 rpm: and 30kW, 380 V, 1465 rpm Speed11 kW: ± 1480 rpm. and 30 kW: ± 2051 rpm With jacketcheck Miscellaneous Mills MaterialSilicon steel 1.5023 General No.0768759 Year of construction1968 Floor space1,2 x 1,4 m Total height1,4 m Weight900 kg Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unitGeneric medicinesStarchAgrochemicalsPlastic & polymersCa ...
General SKU440X1456 LocationBarneveld MakePallmann TypePP-6 Material Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) Main Features MaterialMild steel Capacity30 KW Specified Features - Miscellaneous Mill Turbo cone millcheck 2 Driven rotorscheck Rotor sizeø 600 x 120 mm: ø 700 x 300 mm Grinding room sizeø 760 x 200 mm House jacketed2x Inlet190 x190 mm Feeding with vibro feeder(Not available but possible) Motor11 kW, 380 V, 1480 rpm and 30 kW, 380 V, 1480 rpm Speed11 kW: ± 1090 rpm and 30 kW: 1480 rpm With jacketcheck Miscellaneous Mills MaterialSilicon steel 1.5023 General No.0772828 Year of construction1972 Floor space1,2 x 1,4 m Total height1,4 m Weight750 Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unit&:nbsp:Generic medicinesStarchAgrochemicalsPlastic & polymersCa ...
A 2004 Pallman granulator, model PS8-6 F4/4. Granulators cut plastic scrap down to a consistent flake through a rotor and screen, ready for reprocessing, compounding or sale as regrind. When choosing a used granulator, check the screen size, rotor and blade condition, motor power and feed opening against the material you need to process. A well-matched granulator turns sprues, runners, rejects and post-industrial scrap into a consistent regrind that can go straight back into production or be sold as a reprocessed material. We run balers, granulators and shredders on our own site at Wymeswold, near Loughborough, so we can talk you through how a machine like this would suit your material and throughput. Price on request.
- Dual-stream mill for fine wood chip production with segmented internal grinding elements. - Main motor power 315 KW. - Equipped with PALLMANN CLEANOMAT system (installed according to documentation in 2009). - Stripper. - The upper feed hopper with vibratory system and the magnet are NOT included (marked with a cross in photograph no. 4). - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-14
- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 22 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-6
- Knife ring virute mill for the manufacture of flat chips. - Percussion wheel motor power 250 KW. - Blade ring motor power 25 KW. - Percussion wheel rotation speed 850 rpm. - Cutting circle diameter 1200 mm. - Number of blades: 49. - Blade length 450 mm. - Maximum production up to approx. 10000 kg/h (depending on the type of wood, moisture and chip thickness). - Stripper. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-7
5.000 € 
