Manufacturer:
(Category: 1300)
Dryer ComAir DEMAG CAD 430 W/292 W Properties: Total height 1900 mm Length 1200 mm Width 1400 mm Type CAD 430 W/292 W Machines Serial No. 00/4/14381/01 Engine power 4.7 kW Permissible pressure/max. pressure refrigerant side 16/20 bar Permissible pressure/max. pressure compressed air side 16 bar Ab. Ambient temperature min./ max. +2/ +50 °C Operating voltage 400 V Phase 3 Ph Frequency 50 Hz Nominal consumption 4,700 kW Protection class IP 54 Refrigerant R 134a Description: Largest refrigerant machine charge weight 7,500 kg Fuse/Fuse max. 20A Test Group (DruckbehV) I
Dryer Type SD 085W Type 419 Properties: Type SD 085W Type 419 Machines Serial No. 003 / 14279 / 07 Overall length 900 mm Width 900 mm Total height 1900 mm Engine power 1.36 kW Description: Refrigerant: R 134a / 1.50 kg P SHP 20 bar P SLP 16 bar t o +2/ +50°C Compressed air: p s 16 bar t s 60 °C t o +2/ +50°C 220-230V1N ͂/50Hz 1.36 kW 16A / IP 20 RWTÜV Reg. No. 2541/98
Dryer type SD2250/426W Properties: Type SD2250/426W Machines Serial No. 021 / 15089 /07 Total length 1300 mm Width 1400 mm Total height 2000 mm Engine power 2.9 kW Description: Refrigerant: R 134a 7.5 kg P SHP 20 bar P SLP 16 bar t o +2/ +50°C Compressed air: p s 16 bar t s 60 °C t o +2/ +50°C 380-400V3 ͂/50Hz 2.90 kW 20A / IP 54 RWTÜV Reg. No. 2540/98
Compressor Type Champion 180 TS Properties: Identification number 449001/158 Order no. 10095340 Built-in compressor 158 Compression medium AIR Length 3050 mm Width 2100 mm Total height 2100 mm Weight 3860 kg Flow rate 17.0 m³/min Suction pressure 1 bar Step pressures 22 / 12 bar g Speed 1000 min ̄¹ Installed engine power 110 kW
Compressor Type Q52 - 8.0 W Properties: Type Q52 - 8.0W Identification number 052-000103 Order no. 14988/ 14989 Compression medium AIR/LUFT Length 2500 mm Width 1800 mm Total height 2000 mm Weight 2600 kg Volume flow 51.6 m³/min Suction pressure 1 bar Full load current 525 A Step pressures 8 bar g Speed 60600 min ̄¹ Installed motor power 300 kW Voltage 400 V Phase 3 Ph Frequency 50 Hz
Evaporator/ Evaporator/ Evaporation 52,000 litres of milk /at 7.5% - 10% fat content Description: At 7.5% fat content, 50% water = 26,000 litres At 10% fat content, 66% water = 17,333 liters
Counting machine tested and cleaned.
Specifications Follow asap 04.1.189
Specifications Brand: Baudin Type: 681MB Kind: Flat Poly Grinding Machine Serial number: 409 Year of construction: 1991 Length mm: 5,800mm Width mm: 1,600mm Height mm: 2,500mm Max speed: Adjustable from 0.4 to 4.2 m/min. Min.-max. glass thickness: 3–25 mm Min.-max. glass size: 80×120, up to 3,000×3,000 State machine: Working disassembled, Photos/film available: Photos available 02.1.200
Specifications Brand: Bavelloni Type: PR88 Kind: Flat Poly Grinding Machine Serial number: 02 43 401 Year of construction: December 1995 Weight: Approx. 3,600kg Assets: 16.7 kW/ 400V Air pressure: 7-8 bar Length mm: 7,400mm Width mm: 1,300mm Height mm: 3,300mm Working height: 900mm Transport dimensions L x W x H 4.0 x 2.5 x 2.4 Max speed: 0.5–5 m/min Min.-max. glass thickness: 3–31mm Min.-max. glass size: Min. 50x50mm Number of spindles: 8 spindles State machine: Working disassembled Photos/film available: Photos are of a different but identical machine 02.1.198
Cooling Capacity : 206 RT Total Input KW : 119.1KW KW/Tons : 0.5774 Fluid Flow : 124.5 M3/hr Incoterm: EX WORK Currency: USD Commercial: Aaron Tan (yytantopglove.com.my)
6MT SS TANK CURRENCY: MYR If interested, kindly contact Ms. Fatimah (fatimah_asmad@topglove.com.my)
90KW AND 120KW CURRENCY: MYR If interested, kindly contact Ms. Fatimah (fatimah_asmad@topglove.com.my)
CURRENCY: MYR If interested, kindly contact Ms. Fatimah (fatimah_asmad@topglove.com.my)
Feeder WGOMA VS 34 -used-incl. Tripod---------- Technical data ----------castors: 3 pieces, number of speeds: 4
Table milling machine MARTIN T21 -used-finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical data ----------Table size: 1,000 x 930 mm, Spindle diameter: 30 mm, Height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Suction nozzle Ã: 120 mm, Weight: 630 kg
Table milling machine SCM T130 NPS -used-fine-adjustable milling fence, dispensing and slotting table, clockwise/counterclockwise rotation---------- Technical data ----------Table size: 1,080 x 750 mm, spindle diameter: 30 mm, speeds: 3,000/4,500/6,000/7,000/10,000 rpm, suction nozzle Ã: 120 mm, suction nozzle à bottom: 120 mm
Slotted hole drilling machine SAMCO AS 16 -used-engine movable, dowel drilling device---------- Technical data ----------Work table dimensions: 550 x 285 mm, drilling width: 190 mm, drilling depth: 120 mm, speed: 2,840 rpm, motor: 1.5 kW, weight: 220 kg
Eurolux GmbH & Co.KG
