Manufacturer:
(Category: 1300)
Caterpillar 3508 - Rebuild - 599 kW - 70Z
Hot stamping hand lever press, embossing foils, silver gloss and gold luster among others are included Note: The operating hours are unknown. The entry 99999 hours is only pro forma and does not correspond to the actual hours
Hand lever press partly with pneumatic cylinder Note: The operating hours are unknown. The entry 99999 hours is only pro forma and does not correspond to the actual hours
1 foot lever presses for punching, bending, pressing and punching various materials
Hilco Industrial is the selected partner by Hyundai RB to facilitate the sale of new LSAW Welded Pipe complete production lines as well as individual machinery, designed and manufactured by Hyundai RB (South Korea). Based on excellent production capacity achieved over more than 25 years’ experience, Hyundai RB developed its own S.A.W. pipe production lines featuring JCO Press Bending. LSAW Welded Pipe Production Line Main Equipment and features: Shot Blasting – Max 6m/min x width 4,800 Edge milling – Φ800 cutter type x 130kw – Quick tool changing – Max. milling speed: 6m/min. – Automatic calculation of number of milling – Automatic width checking Edge-Bending (Pre-Bending) – 1,500 ton/8t ~60t/6~13.5m – Quick size changing – Max. bending thick.: 60mm JCO Press Bending – 6,000/8,000/10,000 ton (max.13.5M) – PLC with CNC (Recipe memory) ...
Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible.
Features: belt feeder, Ero gluing system (cold glue, 4 nozzles), folding unit, pressing belt, max. sheet size: 60-800x126-1100mm, production possibilities: straight line, crash lock bottom, 4- and 6-corner, double-wall boxes and file covers/piches/envelopes, board thickness: 200-800g/m², corrugated board: N-, E-, F-flute, max. belt speed: 320m/min, shaking speed: 20m/min, main motor power: 11kW, total power requirement: 35kVA, max. air consumption: 0.7m³/min, length: 12,700mm, width: 2600mm, weight: 7t. Operational hours counter: 1494h. An on-site inspection is possible.
Oil-water separation system, condensate separator, oil and water separator, oil separator, oil/water separator, air compressor oil-water separator -Manufacturer:BEKO, air compressor oil-water separator -Type: 30/0.8Mpa -Dimensions: Ø 360 x 1220 mm -Weight: 24 kg
Control panel, control unit, steering, steering unit -Manufacturer: Linde, steering unit control unit from electric tractor P 250 -Individual components: see photos -Transport dimensions: 630/470/H355 mm -Weight: 16.6 kg
Lamella water sedimentation tank 7000 lt/Hour Stainless steel 304, 4mm thickness
Trailer coupling, trailer coupling, jaw coupling, automatic jaw coupling -Trailer coupling: from electric tractor Linde P 250 -Towing capacity: 16 t -Transport dimensions: 225/112/H340 mm -Weight: 6.4 kg
x-travel: 1500 mmy-travel: 800 mmz-travel: 600 mmtotal power requirement: kWweight of the machine ca.: 2,7 tdimensions of the machine ca.: 2,66 x 1,60 x 3,10 mCNC-controlled Coordinate Measuring Machine for fully automaticmeasuring of workpieces. Incl. Measuring Software MDM Metrosoft Level 2 for measuring of:- Points, surfaces, circles, cylinders, cones, distances and angles.- SPC software for statistic evaluation of the measurementsMachine not operational!The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An SMT pick-and-place system that can be used as a standalone or inline machine. With single head with laser centring, upward-facing camera and display. Voltage: 230V, the machine has been regularly serviced, with accessories. On-site viewing is possible.
For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...
Diesel Power Holland B.V.
