Manufacturer:
(Category: 1300)
Some Siemens and Vacon automation components are available. 1) Frequency inverter Vacon NXS00225. 2) Power module Siemens Simodrive 611 50A. 3) 2x power module Siemens Simodrive 611 25A. 4) 5x infeed module Siemens Simodrive 611 10kW/25kW. 5) 3x infeed module Siemens Simodrive 611 5kW/10kW. Documentation available. On-site inspection is possible. All articles are new.
A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible.
Heat pump, chiller - air-cooled, Type: Taurus HTAT 055/HE – 130 / 111 kW Manufacturer: MTA S.p.A. Taurus HTAT 055/HE are compact heat pump / water cooling units that are suitable for outdoor installation including with hydronic kit (tank 200 ltr. + P15 pump) for low outside temperature down to -20°C with electron. Fan speed control (EC fans). Heating capacity kW 130 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 22.5 Available pump pressure bar 1.03 Ambient temperature °C +7 Cooling capacity kW 111 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 19 Available pump pressure bar 1.26 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 60 Max. Current (A) 98 Starting Current Circuit (A) 312 Protection class: IP54 Dimensions: Length mm 3415, width mm 11 ...
Combination with the Grieffe Intermac Glass100E Combi machine Brand Intermac Type CNC Grooving Machine Model Groove 1500 Serial number 80029 Year of construction 1998 Weight +/- 5 tons Assets 18 kW Air pressure 7-8 Bar Water pressure: 1.5 bar Length mm 5700 Width mm 2600 Height mm: 2300 Working height 84 cm Transport dimensions L x W x H 6.0 x 2.45 x 2.3 Min.-max. glass size 1760 x 3000 in mm State machine Disassembled in working order Type of control CNC Electrical connection 63A 3P+N+PE Photos/film available: Photos and video available Other incl. tools 02.4.020
The Bottero 353 BKM-R is an advanced float glass cutting table designed for loading, cutting, and breaking glass sheets. This model combines high precision, speed, and flexibility and is suitable for both series production and special pieces. Year of construction 2018 Chassis number: 30900400001784-01564_011 Plastic film cutter Glass thickness: 2 – 19 mm Maximum cutting speed: 150 m/min Maximum plate size: 3810 × 2750 mm Table type: tilting, hydraulically operated Air cushion system: centrifugal fans, MDF plan with felt Cutting bridge: steel bridge, placed transversely Rack and pinion system: gears facing downwards to prevent dirt build-up Cutting head: aluminum alloy, automatic glass thickness detection, proportional solenoid for pressure control Software: Shape Scanner, Sonar detection for special materials, BCMS Windows optimizer Machine dimensions: width 3596 mm, le ...
The Bottero 301C is a laminated cutting table, specifically designed for cutting and separating laminated glass. Key specifications include: weight approximately 2.8 tons, power 10–11 kVA, max. cutting length 3400 mm, glass thickness 3–10 mm (monolithic up to 19 mm), 380V/50Hz connection. Technical specifications Bottero 301C Brand / Type Bottero 301C Chassis number GG301C-164 Year of construction 1994 Machine type Cutting table for laminated glass (semi-automatic) Weight ± 2,800 kg Power 10.9 kVA – 50 Hz Electrical connection 380V Machine dimensions: Length 4900 mm, width 3350 mm, working height 930 mm Transport dimensions approx. 4.2 × 2.4 m + 4.8 × 1.0 × 1.6 m Glass thickness range 3 – 10 mm laminated, 33.1 – 66.2 mm PVB; monolithic up to 19 mm possible Max. cutting length 3400 mm Functions Cutting, breaking and separating lamina ...
The Pannkoke 7011 CeDe is a vacuum lifting system for glass and similar materials. It is designed for the safe and flexible internal transport of heavy sheets. Below you will find the key specifications. ⚙️Main technical data Type: Vacuum lifter Year of construction : 2001 Serial number : 2001/ 2184 01 Vacuum circuit: o 1-circuit system with vacuum tank, check valve, vacuum switch and vacuum gauge o Closed circuit prevents vacuum loss in the event of a power failure o Acoustic signal when there is insufficient vacuum o Vacuum generation: o Built-in low-maintenance vacuum pump (dry running) Battery-powered, with quick-change system (battery change < 1 minute) o Charger for second battery (110–230 V, 50/60 Hz, 1 phase) o Operation: o On/off directly on the device o Suction/release via remote control o Suspension: 2-fold crane suspension, rotat ...
The Bottero 131BMK is an automatic float cutting table for flat glass, designed for straight-line cutting. Below you'll find the key technical specifications and features. Technical specifications Bottero 131 BMK Machine type: Float cutting table (monolithic glass) Brand/Model: Bottero 131 BMK Year of construction: 2000 Chassis number: GG60KB-6011 Weight: approx. 2,250 kg Power: 14.2 kVA Power supply: 380 V / 50 Hz Air pressure: 3 bar compressed air required Maximum speed: 80 m/min Glass thickness: 2 – 18 mm Maximum glass size: 2550 × 3300 mm Capacity: Straight cutting, no shaping/cutting of complex patterns ⚙️Features Automatic cutting table with CNC control for straight-line cutting. Optimization software (depending on version) for cutting patterns. Pneumatic scoring system suitable for float and low-e glass. Robust design for long-term industrial use. ...
The Bottero 301C is a laminated cutting table, specifically designed for cutting and separating laminated glass. Key specifications include: weight approximately 2.8 tons, power 10–11 kVA, max. cutting length 3400 mm, glass thickness 3–10 mm (monolithic up to 19 mm), 380V/50Hz connection. Technical specifications Bottero 301C Brand / Type Bottero 301C Chassis number GG301C-6708 Year of construction 2000 Machine type Cutting table for laminated glass (semi-automatic) Weight ± 2,800 kg Power 10.9 kVA – 50 Hz Electric 380V connection Machine dimensions: Length 4900 mm, width 3350 mm, working height 930 mm Transport dimensions approx. 4.2 × 2.4 m + 4.8 × 1.0 × 1.6 m Glass thickness range 3 – 10 mm laminated, 33.1 – 66.2 mm PVB; monolithic up to 19 mm possible Max. cutting length 3400 mm Functions Cutting, breaking and separating lami ...
Chassis number 50145 Year of construction 1991 Voltage 380V / Freq 50 Hz An automatic cutting table specifically designed for cutting laminated glass (with PVB or EVA). Below you'll find the key specifications and features. Technical specifications Machine type: Automatic cutting table for laminated glass (PVB/EVA) Maximum glass size: approx. 3300 mm Processable thicknesses: from 3+3 mm to 10+10 mm Cutting head: CNC controlled Automatic pressure adjustment depending on glass thickness Simultaneous cutting of both glass layers Breaking system: Breaking bar for mechanical breaking Thermal separation via linear resistance (heating element) Cutting accuracy: ± 0.3 mm Work surface: air cushion table (air float) for easy glass transport Control & programming: Input of cutting formats and patterns Possibility to upload files (CNC programs) Machine dimensions: approx. 36 ...
-Manufacturer: Trotec - Model: Speedy100c-8063 -Date of manufacture: August 2022 -Serial number: S1-7145 -45 watts CO2 -230 V -50 Hz -with autofocus -with air conditioning - with 2.0" lens -with cutting table 12.7 mm -with performance upgrade -with X-axis with 2 carriages -Rulers in mm incl.: -Suction -Manufacturer: Aigner/Trotec -Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 -8247 Exhaust Connection Cable -Suction operating hours: approx. 1639h Shipping available on request. Sale only to tradespeople.
Pagus Maschinenhandel Online Shop
