Производитель:
(Категория: 709)
Closed stainless steel butter silo. The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of 5,5 kW - 415 V - 1.466 rpm - ratio 306,86 - n2: 4,77 rpm). Total volume: ± 5.000 liter. Manhole 2x on the left side and 1x on the right side. Infeed on the top for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM). CIP cleanable with spraybowls. Outfeed plate with product connection on the outfeed of the silo for connection of the outfeed butter pump. Including outfeed butter pump, Waukesha 220 U2 and free standing control panel. Total dimensions silo: 4,00 x 1,50 x 2,80 meter. Total dimensions pump: 1,35 x 0,75 x 1,35 mtr., Type of Machine: Buttersilo, Capacity: ± 5.000 kg, Motor: 5,5 kW - 415 V - 1.466 rpm - ratio 306,86 - n2: 4,77 rpm, Dimensions: 4,00 x 1,50 x 2,80 meter, Weight: ± 1.800 kg
Complete powder plant existing out of Evaporator (4-effect, TVR), Spray Dryer, Fluidbed Dryer, 2x Crystallization Tanks and a Big Bag Filling Station. Previously used for skim milk / whole milk / whey / permeate or 35% protein powder. Still mounted on its original postion inside the factory in Spain. Line per direct available., Infeed capacities evaporator:, - Skim milk: 7.200 kg/h @ 9% TS., - Whole milk: 4.800 kg/h @ 12,5% TS., - Whey: 8.150 kg/h @ 6% TS., - Permeate: 8.835 kg/h @ 4,5% TS., - 35% Protein: 2.880 kg/h @ 10% TS., - Water for startup and CIP: 10.000 ltr/h @ 2 bar., - Water for cooling seals in vacuum pumps: 7.000 ltr/h @ 25 °C - 2 bar, demineralized., - Water for safety / firefighting should be available at 7.000 ltr/h @ 2 bar., - Water for condenser cooling: 30.000 ltr/h @ 28 °C - 2 bar., - Ice water for flash system: 2.000 ltr/h @ 3 °C - 2 bar., - Saturated dry steam: ...
APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and ...
Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (15 kW), motor cover, base plate with feet, cyclone and all inlet / outlet pipes., Additional features:, Excluding:, - Waterbox with water valves., - Control panel., - Service tools for maintenance., Type of Machine: Cream Separator / Skimmer, Capacity: 15.000 liter per hour, Bowl speed: 5.000 rpm, Motor: 22 kW - 380 V - 42 A - 1.450 rpm - 50 Hz - 3 Ph, Weight: ± 1.650 kg, Dimensions: 145 x 110 x 175 cm
Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...
IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed ...
Including trim removal unit, Capacity: up to 3 cycles/min, Product length: max 750 mm, Belt width: 800 mm, Seal bar: 1350 mm, Vacuum pump: Busch Panda WV1500B roots, Compressed air: 6 Bar, 250 Nl/min, Power: 3 x 400V, 50Hz, 4kW, Dimensions: 3750 x 1500 x 2200 mm, Weight: 2200 kg
NEW in box, never used, Order number: ON17163, Capacity: max 800 pigs/hr., Products: pork carcasses, left & right, Slaughtered weight: 70 - 120 kg, Air pressure: 6 - 8 Bar, 285 Nl/min., Power: 3 x 400V, 50Hz, 45kW, Dimensions: 10000 x 5150 x 2300 mm
Line is consisting of:, Henkelman double chamber vacuum machine, Type: Titaan 2-90, Serial number: HTN10220019, Year of construction: 2023, Chamber: 840 x 890 x 220 mm, Seal bar: 2 x 840 mm, Cycle: 30 - 50 sec, Vacuum pump: Busch 300 m³/hr, Compressed air: 6 Bar, 100 Nl/min, Power: 3 x 400V, 50Hz, 5.5kW, Dimensions: 2450 x 1100 x 1150 mm, Weight: 850 kg, Automatic lid and outfeed conveyors, Hellings conveyor, Type: 12980-10, Serial number: 790311, Year of construction: 2021, Belt width: 600 mm, Length: 3000 mm, Henkelman diptank, Type: 200A, Serial number: H0D20220008, Year of construction: 2022, Heating: electric, Usable space: 575 x 1100 mm, Immersion depth: 200 mm, Cycle time: 22 sec, Compressed air: 6 Bar, 50 l/min, Power: 3 x 400V, 50Hz, 23kW, Dimensions: 1200 x 2500 x 1350 mm, Weight: 310 kg
Line consists of:, Sugar cube line:, Type: T.T.O.R. 125, Year of construction: 2014, Capacity: 500 kg/hr, Cube size: 10 x 20 mm, Belt width: 295 mm, Drying tunnel: 18000 mm, Cooling tunnel: 4000 mm, Big bag infeed bunker, Capacity: max 1200 kg, Platform height: 1550 mm, Elevating height: 3000 mm, Dimensions: 3100 x 2020 x 4750 mm., Box forming machine, Box size: 210 x 100 mm, Belt width: 100 mm, Dimensions: 1500 x 1400 x 1630 mm, Box closing machine, Belt width: 100 mm, Distance between dividers: 330 mm, Dimensions: 2360 x 700 x 1600 mm
, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height: ...
Цилиндро-конический ферментационный бак из аустенитовой стали. Дополнительное название: вертикальный, охлаждаемый резервуар из нержавеющей стали, вместимость: 6300 л, максимальное избыточное давление: 1 бар, температурный диапазон: 50 °C, длина: 1700 мм, высота: 4359 мм, материал: нержавеющая сталь 1.4571, 1.4404, 1.4301, положение: стоя, вертикально, основание: футы, характеристики: 2 x охлаждение оболочки, 1 x конусное охлаждени
3 цилиндрических бака для ферментации и хранения с охлаждением рамки и конуса, дополнительное название: вертикальные баки из нержавеющей стали с охлаждением рамки и конуса, общий объём: 3000 л, производительность давления: 3 бар, длина: 1860 мм, ширина: 1860 мм, высота: 3700 мм, материал: нержавеющая сталь, основание: стоя на ногах, особенности: охлаждение рамы и конуса, отбор проб, соединение DN50; панели с клапанами;
3 вертикальных бака из нержавеющей стали, каждый из которых можно нагревать горячей водой. Ранее использовался как резервуары для CIP (2 x щелочные и 1 x кислотный резервуар), дополнительное название: нагреваемый, вертикальный сосуд из нержавеющей стали, объем примерно 1000 л, ширина: 1 м, высота: 2 м, вес: 250 кг, материал: нержавеющая сталь, положение: свободный вариант, основание: цилиндрический резервуар с квадратными трубчатыми ножками на сферических колпачках, особенности: верхняя крышка, изм ...
The ventilation system was used to extract kitchen exhaust air. The system is weatherproof and can therefore also be installed outdoors., Additional title: Fan for air exchange, Flow capacity: 20000 m³/h, External compression: 600 Pa Total compression: 734 Pa, Fan revolution: 1160 1/min, Noise level next to the unit: 58 dB(A) in 1 m distance, Power: 5,82 kW (inkl. Frequency converter), Motor 7,5 kW, Current: Motor-electric power 16,01 A, Voltage: Motor-Voltage 3 x 400 V, Frequency: 53 Hz, Length: approx. 4070 mm, Width: approx. 1630 mm, Height: approx. 1810 mm, Weight: 1200 kg, Operation / Control: controlled via wall mounted cabinet with integrated controllers, Material: Stainless steel cabinet, Features: Fan (free spinning wheel), Frequency controller, electrical cabinet, bird protection (780 x 780)
Описание Установка разделения твёрдого и жидкого тела на основе центробежного сита (Centri-Sifter): твёрдые тела транспортируются по корзине/сетке с помощью винта/лопатки, а жидкость отделяется и сбрасывается через специальный выход. Регулируемый наклон для адаптации времени проживания и эффективности разделения. Продаётся с бункером на 1000 л и гибким винтовым конвейером. Состояние как новое (используется только для тестирования), функционально и сразу доступно. Основное оборудование – Ce ...
100 € 
