We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
pressure: 100 tthroat: 260 mmstroke: 20-100 mmno. of strokes: 60 Hub/minram - range of adjustment: 70 mmram surface: 330x300 mmtable surface area: 750x550 mmmax. distance table - ram: 525 mmhole in the table: 300x175 mmtotal power requirement: 5.5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 55 tthroat: 200 mmstroke: 10-80 mmram - range of adjustment: 60 mmno. of strokes: 120 Hub/mintable surface area: 600x450 mmram surface: 290x230 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 3,5 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 110 tthroat: 290 mmstroke: 20-124 mmno. of strokes: 60 / 90 Hub/minram adjustment: 85 mmtable surface area: ca. 920 x 590 mmram surface: ca. 530 x 280 mmdistance table to upper part of the press: ca. 450 mmhole in the table: ca. 180 x 300 mm mmtable height: ca. 750 mmtool hole in ram: Ø 50 mmNumber of working hours: 8214 hdistance table to upper part of the press: mmweight of the machine ca.: 5,5 tdimensions: ca. 2000 x 2000 x 2600 mmoverhauled by the manufacturer Helmerding in 2014 including conversion to new onespress safety control.Operating hours read since overhaul in 2014: 8214Documentation of press safety control availableelectrical grease central lubricationHydraulic clutch-brake combinationMechanical break plate in the ramtwo-hand operationfoot controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 75 tthroat: 260 mmstroke: 16-80 mmtable surface area: 800 x 520 mmdistance table/ram: 350 mmstrokes - infinitely variable: 50 - 250 Hub/minram surface: 400 x 300 mmram adjustment: 70 mmtotal power requirement: 7,5 kWdimensions of the machine ca.: 2,7 x 1,7 x 2,6 mweight of the machine ca.: 4 thole in the table: 260 x 180 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Plunger pressure 4 t Stroke rate 70 / min
used
pressure: 100 tthroat: 330 mmstroke: 10-130 mmno. of strokes: 56 Hub/minram - range of adjustment: 80 mmtable surface area: 830x600 mmram surface: 250x130 mmtable height: 870 mmtool hole in ram: 50 mmweight of the machine ca.: 11 tdimensions of the machine ca.: BxTxH 2100x1900x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 12 tthroat: mmstroke: 6 - 60 mmtable surface area: 400 x 275 mmhole in the table: 120 x 150 mmram hole: 30 mmtotal power requirement: kWweight of the machine ca.: 500 kgdimensions of the machine ca.: 1,0 x 1,0 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 15 tthroat: 180 mmstroke: 6 - 60 mmno. of strokes: 145 Hub/minram adjustment: 40 mmtable surface area: 400 x 270 mmhole in the table: 100 mmram surface: 120 x 100 mmdayligth: 250 mmtotal power requirement: 1,1 kWweight of the machine ca.: 1150 kgdimensions of the machine ca.: 0,96 x 1,34 x 1,88 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 tthroat: 260 mmstroke: 10-100 mmram adjustment: 80 mmtable surface area: 700x500 mmram surface: 450x300 mmtable-regulation: 400 mmcoil: Schwabe GSW type: MHM 2 total power requirement: kWweight of the machine ca.: 6,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 80 tthroat: 280 mmstroke: 10-100 mmno. of strokes: 85 Hub/minram - range of adjustment: 60 mmtable surface area: 820x530 mmram surface: 260x210 mmhole in the table: Ø 120 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5 tdimensions of the machine ca.: BxTxH 2000x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 45 tthroat: 230 mmstroke: 4 - 80 mmstrokes per minute: 120 table surface area: 690 x 460 mmram surface: 360 x 185 mmram adjustment: 55 mmdaylight, max. stroke above - ram adjustment above: 340 mmtotal power requirement: 3 kWweight of the machine ca.: 2,95 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 80 tthroat: 285 mmstroke: 10-100 mmno. of strokes: 65 Hub/minram - range of adjustment: 60 mmtable surface area: 850x640 mmram surface: 420x210 mmtable height: 800 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,2 tdimensions of the machine ca.: BxTxH 2500x2500x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 75 tthroat: 290 mmstroke: 12 - 100 mmram adjustment: 80 mmno. of strokes: 140 Hub/mintable surface area: 830 x 560 mmram surface: 630 x 300 mmtotal power requirement: kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 80 tthroat: 400 mmstroke: 8 - 112 mmno. of strokes: 120 Hub/minram adjustment: 70 mmdayligth: 412 mmtable surface area: 850 x 600 mmram surface: 640 x 400 mmcolumn daylight: (hinten) 680 mmtotal power requirement: 11 kWweight of the machine ca.: 6,1 tdimensions of the machine ca.: B 1,3 x T 1,9 x H 3,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 30 tthroat: 180 mmstroke: 10 - 75 mmno. of strokes: 125 Hub/mindayligth: 225 mmdistance table - lower edge of ram: 300 mmram adjustment: 50 mmtable-size: 360 x 560 mmram head dimension: 260 x 340 mmwork height max.: 670 mmtable hole: 140 mmram hole: 35 mmtotal power requirement: 2,2 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 1,1 x 1,3 x 2,0 mThis eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming.Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance P ...
Raskin Master 50 tonCapacity: 50 ton Deph of throat: 240 mm Max adjustable stroke: 10 > 80 mm Distance between table -- ram: 360 mm Table area: 650 x 500 mm Electric motor (power): 5,5 HP Weight: 2350 kg
used
pressure: 65 tthroat: 370 mmstroke: 29-151 mmno. of strokes: 50 Hub/minram - range of adjustment: 80 mmtable surface area: 1300x700 mmram surface: 1000x600 mmhole in the table: ¦ 110 mmtable height: 800 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 6 tdimensions of the machine ca.: BxTxH 1700x2000x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 100 tthroat: 370 mmstroke: 10 - 140 mmno. of strokes: 58 Hub/minram adjustment: 80 mmtable surface area: 900 x 670 mmram surface: 410 x 430 mmtable height: 760 mmtool hole in ram: 65 mmtoolpiece height max.: 450 mmweight of the machine ca.: 6 tpneumatic clutch-brake combinationMechanical fracture plate in the ramTwo-hand operationFoot controlUVV until 03/2023The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 20 tthroat: 155 mmstroke: 6-60 mmno. of strokes: 84-210 Hub/minram - range of adjustment: 50 mm: 300 mmtable surface area: 300x450 mmtable height: 840 mmhole in the table: Ø 90 mmram surface: 190x278 mmtool hole in ram: Ø 25 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: BxTxH 1100x1100x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 20 tthroat: 155 mmstroke: 6-60 mmno. of strokes: 84-210 Hub/minram - range of adjustment: 50 mm: 300 mmtable surface area: 300x450 mmtable height: 840 mmhole in the table: Ø 90 mmram surface: 190x278 mmtool hole in ram: Ø 25 mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,0 tdimensions of the machine ca.: BxTxH 1100x1100x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 30 tthroat: 180 mmstroke: 8-76 mmno. of strokes: 80-200 Hub/minram - range of adjustment: 60 mmtable surface area: 360x580 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: BxTxH 1350x1200x2100 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 40 tthroat: 195 mmstroke: 8-78 mmno. of strokes: 76-190 Hub/minram - range of adjustment: 60 mmtable surface area: 650x380 mmtable height: 840 mmhole in the table: Ø 110 mmram surface: 250x350 mmtool hole in ram: Ø 40 mmtotal power requirement: 3 kWweight of the machine ca.: 2,2 tdimensions of the machine ca.: BxTxH 1450x1220x2110 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 50 tthroat: 230 mmstroke: 12-110 mmno. of strokes: 40-100 Hub/minram - range of adjustment: 70 mmtable surface area: 740x440 mmtable height: 840 mmhole in the table: Ø 140 mmram surface: 460x300 mmtool hole in ram: Ø 45 mmtotal power requirement: 4 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: BxTxH 1500x2500x2510 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 80 tthroat: 295 mmstroke: 14-150 mmno. of strokes: 34-85 Hub/minram - range of adjustment: 85 mmtable surface area: 900x580 mmtable height: 850 mmhole in the table: Ø180 mmram surface: 560x380 mmtool hole in ram: Ø 50 mmtotal power requirement: 7,5 kWweight of the machine ca.: 5,6 tdimensions of the machine ca.: BxTxH 1800x1850x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 80 tthroat: - mmstroke: 50 mmtable surface area: 875 x 695 mmram surface: 350 x 355 mmram adjustment: 71 mmno. of strokes: 30 - 90 Hub/mindistance between columns: 450 mmweight of the machine ca.: 6,2 tdimensions of the machine ca.: 2,0 x 2,1 x 3,2 mdaylight (stroke down, ram adjustment above): 480 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 tthroat: 440 mmstroke: 8-100 mmno. of strokes: 65 Hub/minram - range of adjustment: 63 mmtable surface area: 720x750 mmram surface: 440x280 mmhole in the table: Ø 240 mmtable height: 830 mmtool hole in ram: Ø 40 mmweight of the machine ca.: ca. 5,0 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
very fast Eccentric press, make SCHULER , tested , electrically connected Type PDv 25/200 Masch.-No. 70/32.0610/9 Technical data: Power 25 to Number of strokes approx. 180 /min Extension 200 mm Impact stroke 8 - 80 mm Shock sift creation approx. 60 mm Table size approx. 570 x 410 mm Installation height approx. 310 mm (measured with mounted clamping plate) Width x Depth approx. 1.1 x 1.35 m plus control cabinet Height approx. 2.15 m Engine power 3 kW Weight estimated approx. 1.5 to
used
pressure: 40 tthroat: - mmstroke: 8 - 90 mmtable size: 630 x 430 mmram adjustment: 60 mmno. of strokes: max. 65 Hub/mintotal power requirement: kWweight of the machine ca.: 2480 kgdimensions of the machine ca.: m- tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 160 tthroat: 400 mmstroke: 20 - 160 mmtable surface area: 1200 x 800 mmram adjustment: 100 mmno. of strokes: 60 Hub/minram surface: 860 x 520 mmtotal power requirement: 15 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 1,7 x 2,5 x 3,23 mThe machine should b partially overhaulednew paintingnew sealsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date
used
Thomas 10 tonCapacity: 10 ton Deph of throat: 250 mm Table area: 285 x 240 mm
used
pressure: 63 tthroat: 280 mmstroke: 8-100 mmno. of strokes: 56/84 Hub/minram - range of adjustment: 63 mmtable surface area: 620x500 mmram surface: 310x260 mmhole in the table: Ø 250 mmtable height: 850 mmtool hole in ram: Ø 40 mmweight of the machine ca.: 4 tdimensions of the machine ca.: 1200x1900x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 80 tthroat: 400 mmstroke: 8-112 mmram adjustment: 80 mmno. of strokes: 52/78 Hub/mintable surface area: 750x550 mmram surface: 400x300 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 200 tthroat: 440 mmstroke: 20 - 180 mmtable surface area: 1200 x 800 mmhole in the table: 450 mmram adjustment: 110 mmtool shank hole (depth x diameter): 65 x 110 mmdistance table/ram: 400 mmdist. between columns - front to rear: 800 mmtotal power requirement: 15 kWdimensions of the machine ca.: 1,82 x 2,4 x 3,72 mweight of the machine ca.: 15,6 tram surface: 750 x 520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 80 tthroat: - mmstroke: 8 - 112 mmtable surface area: 830 x 550 mmno. of strokes: 30 - 85 Hub/minram surface: 630 x 400 mmram adjustment: 71 mmclamping plate: 990 x 550 mmtable height over floor: 810 mmtotal power requirement: 10 kWweight of the machine ca.: 7,7 tdimensions of the machine ca.: 1,5 x 2,2 x 3,15 mEquipment:- with wheel presentation- fixed table- with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mmSelling price applies without inspection and without a test run.The machine should be partially overhauled in our house (at an additional cost)- Complete disassembly and review- livery- new control cabinet with PLC and touchscreen including cabling.Price of the machine in partially overhauled condition: € 44,000.00Delivery time for the partially overhauled machines: by agreementThe data for this ad was created with ModulMWS - the software solution of Logo ...
used
pressure: 100 tthroat: 415 mmstroke: 8-140 mmno. of strokes: 48 Hub/minram - range of adjustment: 80 mmtable surface area: 920x670 mmram surface: 700x450 mmtable height: 800 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: BxTxH 1500x2000x2800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 160 tthroat: 440 mmstroke: 20 - 120 mmtable surface area: 1050 x 750 mmno. of strokes: 42 u. 62 Hub/minram surface: 800 x 500 mmtool shank hole (depth x diameter): 85 x 50 mmhole in the table: 355 mmweight of the machine ca.: 11,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 860x620 mmram surface: 540x360 mmhole in the table: Ø 270 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 1500x2000x2700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 25 tthroat: 220 mmstroke: 8-80 mmdayligth: 355 mmno. of strokes: 140 Hub/minram adjustment: 50 mmram surface: 220x180 mmtable surface area: 160 mmhole in the table: 90 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 25 tthroat: 220 mmstroke: 8-80 mmno. of strokes: 140 Hub/minram - range of adjustment: 50 mmtable surface area: 500x410 mmram surface: 230x170 mmhole in the table: Ø 150 mmtool hole in ram: Ø 35 mmtable height: 900 mmweight of the machine ca.: 3 tdimensions of the machine ca.: BxTxH 1500x1500x2400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 tthroat: 320 mmstroke: 8-100 mmno. of strokes: 120 Hub/minram - range of adjustment: 63 mmtable surface area: 730x600 mmram surface: 540x360 mmtable height: 850 mmtool hole in ram: Ø40 mmweight of the machine ca.: 5,5 tdimensions of the machine ca.: BxTxH 2000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 10 tthroat: 170 mmstroke: 6-60 mmno. of strokes: 160 Hub/minram - range of adjustment: 40 mmtable surface area: 420x320 mmram surface: 180x140 mmhole in the table: Ø 120 mmtable height: 850 mmtool hole in ram: Ø 32 mmweight of the machine ca.: 1 tdimensions of the machine ca.: 1200x1200x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 25 tthroat: 220 mmstroke: 8 - 80 mm mmtotal power requirement: 2,2 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 0,9 x 1,5 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 125 tthroat: 330 mmstroke: 20-120 mmno. of strokes: 50 Hub/minram - range of adjustment: 100 mmtable surface area: 800x640 mmram surface: 500x400 mmhole in the table: Ø 330 mmtable height: 850 mmtool hole in ram: Ø 50 mmweight of the machine ca.: 8 tdimensions of the machine ca.: 1500x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 150 tthroat: 550 mmstroke: 10 - 140 mmtable surface area: 1180 x 980 mmno. of strokes: 40 Hub/mindayligth: 500 mmram surface: 1040 x 800 mmram adjustment: 70 - 150 mmtool shank hole (depth x diameter): 435 x 55 mmrequired power: 15 kWweight of the machine ca.: 12 tdimensions of the machine ca.: 3 x 1,7 x 3 m- with additional brake- slide weight compensation- motorized slide adjustment- central grease lubrication (manual)- table mounting plate- safe for manual inlay workThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg
used
pressure: 100 tthroat: 355 mmstroke: 8 - 130 mmtable surface area: 710 x 1200 mmT-slots at tabel: 3 clamping plate thickness: 75 mmno. of strokes: 50/80 Hub/minram adjustment: 80 mmram surface: 450 x 560 mmT-slots at ram: 2 tool shank hole (depth x diameter): 100 x 50 mmmax. distance table - ram: 540 mmdistance between columns: 400 mmconnected load: 11,5 kWweight of the machine ca.: 9,0 tOverall size: 1,65 x 2,25 x 3,05 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 tthroat: mmstroke: 8 - 120 mmno. of strokes: 135 Hub/minmax. distance table - ram: 560 mmram adjustment: 70 mmtable surface area: 800 x 600 mmram surface: 500 x 400 mmtotal power requirement: 12 kWweight of the machine ca.: 5,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 tthroat: 315 mmstroke: 16 - 125 mmmax. distance table - ram: 417 mmram adjustment: 70 mmno. of strokes: 80 Hub/mintable surface area: 800 x 630 mmram surface: 500 x 400 mmtotal power requirement: 6 kWweight of the machine ca.: 5 tdimensions of the machine ca.: 1,5 x 2,2 x 2,75 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.