online used for sale

2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative  ...

FIMIC RAS 325 BACKFLUSH, fully automatic screenchanger, for back-flush only, so for contamination under 5%, no costs for doctor blades, no cost for laser filter., works with standard mesh, capacity related to screening mesh - with a 250 µ mesh, up to 700 kg/h, connected for test, offered totally reconditioned, with new control panel (or with drawings only), availability: 4 -5 weeks time, capacity: Max 500-600 kg/h, conditions: totally reconditioned, type: fully automatic - backflush

Selling an inventory of a mechanical engineering company. various lathes, milling machines, rolling machines, saws, etc. Pictures on request. The machines are only sold as a package! Not individually

Aluminium profile, 23,7m, only € 25/m, 90x90 L B Type Groove 10 light, , used-Top Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Top condition: The profiles were removed from a new machine that was never in operation. Scope of delivery: 2 pieces 90x90x2900mm 12 pieces 90x90x1160mm 4 pieces 90x90x1000mm

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler -Double miter saw: Saw unit right and left -Saw unit: 45? pivotable -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: O 400 mm -Price/delivery: complete -Total dimensions: 1370/890/H710 mm -Total weight: 250 kg

Superior Super 10 grain crusher / crimper Specifications: Brand: Superior Machines Model: Super 10 Series: Superheavyweight Series Year of construction: 2023 Serial Number: M233019 Version: trailed, PTO-driven Rolls: ST52, approx. 1,220 x 305 mm Roller surface: helical grooves PTO power: approx. 100 hp Crimping capacity: up to approx. 25 tons/hour Dry crushing capacity: up to approx. 16 tons/hour Hopper capacity: approx. 2,000 kg Towing eye: approx. 50 mm Height: approx. 300 cm Width: approx. 244 cm Length: approx. 460 cm Weight: approx. 1,985 kg Elevator height: approx. 350 cm Commodity code: 8437890000 Country of origin: Great Britain CE and UKCA marking Features: V-belt drive Hydraulically positionable discharge elevator Rotary calculator Road kit (no brakes) Chemical applicator assy Suitable for crushing and crimping various grains and crops, incl ...

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: hhttps://youtu.be/BVkxPHXg7GQ - Former Linde full-service device - current service valid until 01/2027 - Current UVV valid until 01/2027 - Battery: 35/2021, 24V 250Ah, voltage at rest measured at 24.7V - Foldable platform Auction-ID: A1-49673-307

Ref. no.: 17540 Manufacturer: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBUR ...

General SKU065E266 MakeNiro TypeAtomizer F-60 BBE 16 No.1122 Mounted on framecheck Main Features MaterialStainless steel Motor44 KW Inlet diameter210 mm Specified Features - Spray dryer Spray dryer:Rotary atomiser for spray dryer: (1x) With rotary atomisercheck Atomiser dia.160 mm Motor44 KW, 500 Volt (2940 rpm) MaterialStainless steel General LocationBarneveld Floorspace1,0 x 1,0 m Total height2,8 m Weight1050 kgPowdered foodsGeneric medicinesFine chemicalsStarchBiotechnologyCatalysts & fillersFeed additivesDiscountSpray dryersCosmeticsDairySolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicNiro AtomizerIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Chemical > Catalysts & fillersIndustries > Food & Fe ...

Technical data Manufacturer: GUILD MASTER Model: CTX 400 Machine Type: CNC Lathe Control: Gildemeister CNC / ElektroPilot Operating hours: approx. 18,462 h Max. turning diameter: 400 mm (Source: online) Max. turning length: 640 mm (Source: online) Circumferential diameter over bed: 500 mm (Source: online) Spindle bore: 72 mm (Source: online) Speed range: 25 - 5,000 rpm (Source: online) X-travel: 212 mm (Source: online) Z-travel: 640 mm (Source: online) Tool turret: 12-speed (Source: online) Tool holder: VDI 30 (Source: online) Machine weight: approx. 5.1 - 5.5 t (Source: online) Configuration 3-jaw chuck Berg KH200 12-speed tool turret Powered tools available Tool turret prepared for powered tool holders Chip conveyor available Coolant equipment available Closed work area cladding CNC controller with screen Note No original techni ...

Technical data Manufacturer: LID Model: FP3-50 Machine Type: CNC Universal Milling Machine Control: DECKEL DIALOG 12 (Grundig Elektronik) Serial Number: 2680-0141 Travel X: approx. 500 mm (Source: online) Travel Y: approx. 400 mm (Source: online) Travel Z: approx. 400 mm (Source: online) Spindle holder: SK40 / ISO40 (Source: online) Speed range: approx. 31.5 – 5,000 rpm (Source: online) Feed range: approx. 2 – 6,000 mm/min (Source: online) Rapid traverse: approx. 6 m/min (Source: online) Drive power: approx. 7.5 / 10 kW (Source: online) Table size: approx. 800 x 480 mm (Source: online) Machine weight: approx. 2,800 kg (Source: online) Configuration DECKEL DIALOG 12 CNC control Electronic handwheel Closed protective cabin Coolant Setup Vertical milling spindle Integrated control cabinet CRT Monitor WITHOUT! Machine vise Note N ...

Technical data Manufacturer: WEILER Machine Tools Model No.: Intern 140 Machine No.: 85140112 Operating voltage: 380 V Control voltage: 220 V Connected load: 2.2 kW Tip height: 140 mm (Source: Online research) Circulating Ø over bed: 280 mm (Source: online research) Circulating Ø over face slide: 158 mm (Source: Online research) Center width: 650 mm (Source: Online research) Speed range: 96–2,500 rpm, 8 steps (source: online research) Longitudinal feed: 0.02–0.63 mm/rev (source: online research) Tailstock mount: MK 3 (Source: Online research) Quill stroke: 85 mm (Source: Online research) Weight: approx. 660 kg (Source: Online research) Configuration HEIDENHAIN digital display, 3-jaw chuck, Multifix tool holder, tailstock, coolant device and machine base with storage space. Note No technical documentation available. information researched to the best of my ...

Technical data Manufacturer: Friedrich Deckel Aktiengesellschaft Type: FP4M Machine No.: 2203-8891 Control: HEIDENHAIN TNC 123 Operating voltage: 400 V, 3-phase Travel X/Y/Z: up to 500 / 400 / 400 mm (Source: Online research) Spindle speed: 18 steps, 50–2,500 min⁻¹ (Source: Online research) Tool holder: SK 40, M16 (Source: online research) Quill stroke: 90 mm (Source: online research) Feed rate: 8–630 mm/min (Source: Online research) Rapid traverse: 1,300 mm/min (Source: Online research) Clamping table: 800 x 460 mm, 7 T-slots (source: online research) Max. table load: approx. 400 kg (source: online research) Machine weight: approx. 1,450 kg (Source: Online research) Configuration Universal tool milling machine with HEIDENHAIN TNC 123, active/positioning function in X, Y, and Z, T-slot clamping table, coolant device, mobile control panel, and DECKEL supports.  ...

Technical data Manufacturer: LID Model: FP3NC Type: FP3NC Serial Number: 2803-2395 Control: DECKEL Dialog 3 Machine type: CNC Universal Tool Milling Machine X-travel: approx. 400 mm (Source: online) Y-travel: approx. 400 mm (Source: online) Z-travel: approx. 400 mm (Source: online) Table size: approx. 700 x 460 mm (Source: online) Tool holder: SK40 (Source: online) Quill stroke: approx. 80 mm (Source: online) Spindle speed: approx. 31.5 - 6300 rpm (Source: online) Drive power: approx. 14.5 kW (Source: online) Machine weight: approx. 1,800 - 2,000 kg (Source: online) Configuration DECKEL Dialog 3 Control Vertical milling head Horizontal spindle Machine vise Coolant Setup Tool holder SK40 WITHOUT! ATTACHED MACHINE VICE Note: No original documentation available. The technical data was researched and adopted on the basis of several matchin ...

Technical data Manufacturer: Maschinen Wagner Type: WDE 500 Machine Type: Cycles CNC Flatbed Lathe (Source: Online Research) Year of Make: 2014 Control: Siemens SINUMERIK 828D BASIC T Operating voltage: 400 V / 50 Hz Rated current: 40 A Connected load: 24 kVA Weight: 3.0 t Max. circumferential diameter over bed: 500 mm (Source: online research) Max. turning diameter over cross slide: 280 mm (Source: Online research) Max. centre width: 1,500 mm (Source: Online research) Spindle bore: 82 mm (Source: Online research) Spindle speed ranges: 7–135 / 30–550 / 110–2,200 rpm (Source: Online research) Spindle motor: 7.5 kW (Source: online research) Travel X/Z: 295 / 1,435 mm (Source: Online research) Configuration Machine housing with sliding doors, movable control panel, tailstock, quick-change steel holder, machine lighting and coolant supply. Visible accessory with  ...

Technical data Manufacturer: RECKERMANN Milling Machines, Solingen Type: Kombi 1000 Operating voltage: 380 V Frequency: 50 Hz Tool holder: DIN 2080 / SK 40 (Source: Online Research) Travel Y: 350 mm (Source: Online Research) Travel Z: 450 mm (Source: Online research) Travel X: 700 mm for 1,000 mm table or 1,000 mm for 1,300 mm table (Source: Online research) Spindle speed horizontal: 32–1,400 rpm (Source: Online research) Spindle speed vertical: 48–2,100 rpm (Source: Online research) Drive power: 6.1 / 7.4 kW (Source: Online research) Feed: 10–1,000 mm/min (Source: Online Research) Configuration Robust universal bracket milling machine with horizontal and vertical milling options. 3-axis digital display ANILAM MicroWizard. Large T-slot work table as well as machine vice and other swivelling clamping device. Manual handwheels and separate control panel availabl ...

COMPLETE PANCAKE LINE for the production of plain, cherry, apple, pineap-ple, etc. pancakes Very little used, only 3 weeks in test production After that the management decided to invest more in existing pizza line and cancelled new products pancakes Pancakes 32g ø 80mm (According to pre-owner) â?¢ SCHENK T4096-5035-8 V1.0 contact fryer For baking of dough or meat products competely stainless steel, electrical heating, total length 11 m turning station, complete with 2 DáBáR TSA 800 fat spraying units 22 noz-zles, only used for testing purposes, like new â?¢ ALIMEC DOSATRICE dosage unit Closed for dough with 22 dosing heads with a max. dosing weight of 36 g per dosing head, only used for testing purposes, like new â?¢ MONDINI DTT/LC80 Dosing line for fruit pieces, 22 dosing heads, only used for testing purposes, like new â?¢ 2 DOMINO transport trolley ...

Technical data Manufacturer: HURCO Model: VMX42i Date of manufacture: 2018/3/6 Spindle speed: 12,000 rpm Machine mass according to nameplate: 6,450 kg Travel X/Y/Z: 1,067 / 610 / 610 mm (Source: Online research) Table size: 1,270 x 610 mm (Source: Online research) Max. table load: 1,750 kg (Source: Online research) Spindle power: 18 kW (Source: online research) Tool holder: ISO 40 (Source: Online Research) Tool changer: 30 places (Source: Online Research) Control: HURCO MAX5 / WinMax with double screen (Source: Online research) Configuration 3-axis CNC vertical machining center with 2 machine vices, chip conveyor and separate cooling/tempering unit. Remarks The machine comes from a well-maintained company liquidation and was actively used in ongoing production until the end. Note information researched to the best of my knowledge and belief. No guarantee is g ...

Technical data Manufacturer: KNUTH Werkzeugmaschinen GmbH Model: FPK 4 Machine Type: Tool milling machine / universal milling machine Serial Number: 162500 Year of Make: 2016 Power: 3.2 kW Voltage: 400 V Frequency: 50/60 Hz Table size: 400 x 800 mm (Source: online) Travel X: 500 mm (Source: online) Travel Y: 400 mm (Source: online) Travel Z: 400 mm (Source: online) Spindle speed: 40 - 2,000 rpm (Source: online) Tool holder: ISO 40 (Source: online) Weight: approx. 1,550 kg (Source: online) Configuration 3-Axis Digital Display KNUTH X.pos 3.1 Vertical milling head Horizontal milling device Machine vise Coolant Setup Machine Light Protective cabin / splash guard Instruction manual available Auction-ID: A7-49302-3103

Technical data Manufacturer: Friedrich Deckel, Munich Type: FP1 Design: conventional universal tool milling machine Travel X / Y / Z: 300 / 150 / 340 mm (Source: Online research) Spindle speed range: 40–2,000 rpm, 16 steps (source: online research) Feed range: 10–500 mm/min, 16 steps (source: online research) Tool holder: standard taper 40 for normal version; Special version Morse taper 4 possible (Source: Online research) Clamping surface: 195 × 600 mm for normal version (source: online research) Drive power: 1 / 1.4 kW in the researched version (source: online research) Net weight: approx. 660 kg including control cabinet (source: online research) Configuration With vertical milling head, T-slot work table, manual handwheels, mechanical speed and feed selection as well as CEE connection plug as shown. Remarks The machine comes from a plant closure, w ...

Working areaTurning diameter500 mmDistance between spindles1435 mmMax. Turning Length1100 mmGeneralTurning/milling center with turning length 1100 mm - mounting HSK-A 63 DIN 69893 - B-axis ±120 - Y-axis ±100 mm - 60-fold chain magazine - Absolute, direct path measuring systems in X-, Y- and Z-axis - Hydraulically movable tailstock with foot pedal - Double switch filter - Electric handwheel - DMG MORI IoT connector - Clamping pressure adjustment on the control - 5-axis simultaneous machining; Control: CELOS X with Siemens SINUMERIK ONE Main drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-15000 rpmDrive power (40% DC)22,5 kWDrive power (100% DC)19 kWTorque (100% DC)85 NmTorque (40% DC)120 NmFloor space/WeightDimensions (L x W x H)5,77 x 2,33  ...

Technical data Manufacturer: Kurt Breuning – IRCO Maschinenbau GmbH Series: SIMAG Type: 70.1 R-3 Machine No.: 15000757 Year of manufacture: 05/2005 Voltage: 400 V Frequency: 50–60 Hz Power: 2 kW Machine type: Single channel bar feeder / bar loading magazine (Source: Online research) Max. rod length: 3,200 mm (Source: Online research) Bar diameter: 5–70 mm (Source: Online research) Loading length: 3,250 mm (Source: Online research) Changeover time: approx. 30 s (Source: Online research) Rapid traverse: 30 (70) m/min (Source: Online research) Configuration Control panel HBG 10 Single-channel guidance system Electrical control unit Emergency stop facility Note No technical documentation available. information researched to the best of my knowledge and belief. No guarantee is given for completeness and correctness. Remarks The article comes from a compa ...

Technical data Manufacturer: MAZAK Corporation Model: Quick Turn 10N / QT 10N UNIV. Year of manufacture: 03/1987 Control: MAZATROL CAM T-2 Weight according to nameplate: 7,500 lbs Connection according to the marking: 380 V Max. swing diameter: 440 mm (Source: Online research) Max. machining length: 507 mm (Source: Online Research) Spindle speed: 10–2,600 rpm (source: online research) Spindle bore: 56 mm (Source: Online research) Travel X/Z: 155 / 540 mm (Source: Online Research) Tool turret: 8 positions (Source: Online Research) Configuration CNC lathe with tool turret and chuck. MAZATROL CAM T-2 CNC control with screen and control panel. Attached bar feeder available for material feeding. Lateral chip conveyor available. Closed work area with sliding door. Control was on at the time of shooting. Remarks The machine comes from a well-maintained company liqu ...

Technical data Manufacturer: ALZMETALL Model: RFT 3/2 Machine Type: In-line drilling machine Machine number: 58812 Year of manufacture: 2018 Drill heads: 2 x AX 3/SV-500 Drilling capacity steel: up to approx. 32 mm (Source: online) Threading: up to M24 (Source: online) Spindle holder: MK3 (Source: online) Stroke: approx. 120 mm (Source: online) Projection: approx. 300 mm (Source: online) Speed control: infinitely variable (Source: online) Configuration 2 drilling spindles 2 x ALZMETALL AX 3/SV-500 drill heads Electronic speed display Height-adjustable drill tops Coolant Setup Common work table Emergency stop switch Operating instructions available Auction-ID: A7-49302-3105

Technical data Manufacturer: DECKEL MAHO GmbH Type: FP1 Active Serial number: 2102-3698 Year of Make: 1989 Speed range: 40–2,000 rpm, 16 steps Tool holder: SK40 (Source: online research) Feed: 5–500 mm/min, infinitely variable (Source: Online research) Rapid traverse: 1,200 mm/min (Source: Online research) Drive power: 1.5 / 1.9 kW, factory data FP1 active (source: online research) Voltage: 380 V Dimensions: approx. 1,100 x 900 x 1,550 mm (Source: Online Research) Weight: approx. 700 kg Configuration 3-axis Heidenhain digital display, separate control cabinet, horizontal milling holder, swivelling work table, coolant system and machine light. (Source: Online research) Remarks The article comes from a company liquidation and was actively used in the training workshop until the company closed. Note No technical documentation available. information research ...

1. EQUIPMENT OVERVIEW SIEMENS SGT-500 GAS TURBINES Quantity: Two (2) Units Available Condition: New Surplus / Zero Hours Manufacturing & Storage • Manufactured in 2007 • New surplus, never used • Zero operating hours • Stored strictly in accordance with OEM preservation procedures • Originally supplied for an FPSO project that was cancelled Certification • Marine Rated • DNV (Det Norske Veritas) certified 2. GAS TURBINE – TECHNICAL DATA • Model: Siemens SGT-500 • Configuration: Single-shaft industrial gas turbine • Fuel: Dual fuel – Natural Gas / Diesel • Frequency Capability: 50 / 60 Hz Power Output (ISO conditions – indicative) • Natural Gas: approx. 17.4 MW • Diesel: approx. 17.0 MW (Output may be slightly higher depending on site conditions) Performance • Specific Fuel Consumption • 221 g/kWh (Na ...

Sys Tec IT3000 Industrial Weighing Terminal Universal industrial weighing terminal for integration into Ethernet networks It includes the proven, configurable standard weighing programs: · BASIC for simple weighing systems · COUNT for Unit Count Weighing · CHECK for easy checkweighing · FILL for simple filling systems · ONLINE for simple weighing systems · TRUCK/ONLINE for vehicle weighing systems with online PC connection. Parameter settings can be made from the PC via the IT3000 Configurator or directly over the network with the help of a web browser. After each weighing, the weight, date, time and the entered data can be stored directly in a file on the PC hard drive via Ethernet. Special PC software is not required for this. In ONLINE mode, the IT3000 can be remotely controlled from the PC via the Ethernet interface. The range of commands includes weight ...

Used OCME VEGA HT 1002 shrink wrapperTechnical Specifications & Performance DataThis high-speed Shrink Wrapper is engineered for continuous industrial packaging on beverage production lines. Manufactured by Ocme, model HT 100/2, it delivers reliable bundling with film-only configurations across PET, glass, and aluminum containers. Designed for second hand and used bottling line integration, it supports demanding production schedules while maintaining consistent packaging quality.Manufacturer: OcmeModel: HT 100/2Year: 2012Maximum speed: up to 72,000 bottles/hour (line throughput)Container materials: PET, Glass, Aluminum (cans)Current bottle format: 0.33LMaximum container height: 250 mmMachine pitch: 380 mmPackage type: Film only (no tray)Number of lanes: 2Maximum film reel diameter: 500 mmNumber of film reels: 2Operator side: LeftWorking height: 1250 mmElectrical supply: 400 VInstalled po ...

Technical data Manufacturer: Friedrich Deckel Aktiengesellschaft Type: FP1 Active (Source: Online Research) Year of adaptation control: 1989 Serial Number Adjustment Control: 25955 Operating voltage: 3~380V, 50/60Hz Rated current: 11 A Control voltage: 24 V DC Control/display: HEIDENHAIN TNC 113, 3 axes X/Y/Z (Source: Online research) Spindle speed: 40–2,000 min⁻¹ (Source: online research) Tool holder: SK40 (Source: online research) Configuration Active digital display with positioning function (Source: Online research) Swivelling vertical milling head T-slot work table Separate adjustment control / control cabinet Machine Light Note No technical documentation available. information researched to the best of my knowledge and belief. No guarantee is given for completeness and correctness. The article comes from a company liquidation and was actively used i ...

Nordson / Puffe Extruder Plant Ex20 -1xPS01-1xPE20-1 for melting hot melt adhesives and thermoplastics, feeding as granules. Melting capacity according to the manufacturer's specifications up to 20 litres/h (EX20) Price: 45.000, -- € plus 19% VAT (Gross price incl. VAT 53.550, -- €) EXW Manufacturer: Nordson / W. Puffe Hotmelt-Technology Model No.: Ex20 -1xPS01-1xPE20-1 Year of manufacture: 05/2006 Serial No. 226260231/001 Power: 15 kW, connection 380V three-phase current Emergency stop, traffic light, CE mark Made in Germany Compact system mounted on a stable rolling frame (H= 198 cm, W= 160 cm, D= 110 cm) consisting of Nordson extruder, gear metering pump, Lenze worm drive, control cabinet with Allen-Bradley control, graphical user interface, storage tank, operating manual. Auxiliary: Labotec Minifeed Suction Conveyor MF60 Serial No. 12-103-00669 (Owner's man ...

1 JUSA HT high temperature sample cone / bobbin dyeing machine type Jusapack Junior 6, year 1997, 6 vessels, machine can work with only 1 vessel or with maximum 6 vessels simultaneously, vessel diameter 230 mm, each vessel capacity for 5 x 6" bobbins (possible to load 6 x 6" bicopress bobbins on each vessel), sword useful height is 750 mm, maximal capacity 6 x 6 Kg = 36 Kg, possible to dye 1 or 2 bobbins only working with 1 vessel only, AREL controller type ATC304, circulation pump is inverter controlled, supplied with 6 material carriers. On this machine you can dye, always the same shade, the following capacities: 1 to 6 KG (1 tube only), 7 to 12 Kg (2 tubes), 13 to 18 Kg (3 tubes), 19 to 24 Kg (4 tubes), 25 to 30 Kg (5 tubes), 31 to 36 Kg (all 6 tubes)

We sell 2000 x LTO7 / M8 used tape media These LTO7 M8 tape media have 9 TB capacity instead of only 6 TB of normal LTO7 drives. These are LTO7 tape media formatted for LTO8 drives. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices  ...

High-Energy Ball Mill for Sale Zoz Simoloyer® CM100b with Auto-Batch System AB100 Industrial High-Energy Milling System – Like New – Immediately Available Overview: This offer comprises a Zoz Simoloyer® CM100b Semi-Turnkey System, manufactured in 2013, complete with the Auto-Batch System AB100 and a completely modernized electronic control system. The complete installation has accumulated only one hour of operating time (commissioning and demonstration only) and is therefore in mint, like-new condition. The system represents a rare opportunity to acquire a fully automated high-energy milling solution without the long lead times associated with new equipment. Designed for demanding research and industrial production environments, the system is ideally suited for the processing of advanced materials, nanostructured powders, oxide dispersion strengthened (ODS) alloys, batter ...

approx. 364 pieces, HF stacking system, stacking yokes 400mm high – used - : Price per piece (net) incl. loading! For purchase 50 pieces (minimum quantity): only 99.-€ For at least 100 pieces: only 89.-€ For at least 200 pieces: only 85.-€ For complete inspection only 75.-€ Manufacturer: LBL Stapeljoche Type: HF Stacking System Year of construction 2022 Color: Red Load capacity: 2,000kg Net weight: 35 -55kg Total dimensions: Depth 400 mm Width 920 mm Total height 730 mm Interior Dimensions: Width 760 mm Height 400 mm Permissible load: 14,300kg Condition: good Available: now! Location: 84094 Elsendorf

Used Sigma P plastic tube filling machine. Technical specifications: - Type: Sigma P, - Manufacturer: IM, ACO Group - Year of manufacture: 2011, - Dose size: 3-250 ml, - Tube length: 50-250 mm, - Tube diameter: 10-50 mm, - Capacity depends on tube size, maximum capacity: 1200-2100 tubes/h, - Air consumption: 200-300 dm3/min, - Power: 3.5 kW, - Weight: 600 kg. Product contact parts are made of AISI 316 stainless steel. Other main components are made of AISI 304 stainless steel. Main machine components 1-Tube drive 2-Insertion + orientation 3-Tube sorter 4-Dosing device (pump) 5-Dosage volume setting 6-Positioner 7-Tube hopper 8-Tube hopper height adjustment 9-Intermediate hopper 10-Ejector 12-Plastic tube holder 13-Metal tube holder 14-Control panel 16-Machine frame 17-Tube heating (for plastic tubes) 18-Tube sealing (for plastic tubes only) 19-Trimmin ...

For sale is a used HP Multi Jet Fusion 540 3D printer. The HP Jet Fusion 540 is known for its reliability, efficiency, and high-precision results. Its ideal for small to medium production runs and is perfect for prototyping, functional parts, or complex design requirements., The device was purchased for R&D purposes to print prototypes during development. Throughout its lifetime, it was used only lightly—on average, about once a week. The printer is therefore in very good condition., Special features:, • Efficient material utilization: Up to 80% of the material can be reused, reducing printing costs. The machine automatically mixes the old and new materials., ● High precision: Ideal for industrial applications where precision detail and dimensional accuracy are required., ● Easy to use: User-friendly interface and software simplify the workflow., Condition and maintenance:, ● L ...

GeneralTurning/milling center with turning length 1100 mm - mounting HSK-A 63 DIN 69893 - B-axis ±120 - Y-axis ±100 mm - 60-fold chain magazine - Absolute, direct path measuring systems in X-, Y- and Z-axis - Hydraulically movable tailstock with foot pedal - Double switch filter - Electric handwheel - DMG MORI IoT connector - Clamping pressure adjustment on the control - 5-axis simultaneous machining; Control: CELOS X with Siemens SINUMERIK ONE Working areaTurning diameter500 mmDistance between spindles1435 mmMax. Turning Length1100 mmMain drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmFloor space/WeightDimensions (L x W x H)5,77 x 2,33 x 2,51 mWeight approx.10000 KgTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-15000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% ...

7 pieces telescopic belt conveyor, MAXX REACH, 27m total length - used - : Price per piece ex location: only 18.950.-€ (net), incl. loading! Price when buying 3 pieces: only 16.950.-€ / piece (net) ex location! Price for complete acceptance: only 15.950.-€ / piece (net) ex location! Manufacturer: FMH CONVEYORS INT. LTD. Model: MAXX REACH Type: MR3185-800 Year of Make: 2019 Serial number: e.g. W190103-02-03 According to the manufacturer, up to approx. 27m total length extended Length retracted: 8.80m I.e. the device extends about 18m! Body width: approx. 1.20m Total width approx. 1.53m plus motor on the side approx. 20cm 3-fold telescope Ideal for unloading trailers – the device can then also be located about 5 – 6m away from the unloading gate, i.e. a forklift can still drive in front of it when retracted, etc.! Height: approx. 1.22m Total weight: 6. ...

Eillert G-1500 Vegetable Cutting Line – As New Condition – Only 147 Operating Hours, Available Immediately, An exceptional opportunity to acquire an Eillert G-1500 universal vegetable cutting line in genuine as-new condition. This machine has only 147 operating hours and is supplied complete with a preparation table, outfeed conveyor, and three interchangeable knife sets., The G-1500 is a highly versatile vegetable cutting machine designed for medium-capacity production environments, including fresh-cut vegetable processors, salad factories, commercial kitchens, and food manufacturing facilities. It is suitable for processing a wide range of products including lettuce, cabbage, leeks, carrots, peppers, beans, herbs, and many other vegetables., Included in this Offer, - Eillert G-1500 vegetable cutting machine, - Stainless steel preparation table, - Outfeed conveyor, - 3 interchangeab ...

Used SMI APET 143DF shrink wrapper 14000 BPHTechnical Specifications & Performance DataThis SMI shrink wrapper model APET 143/DF is a robust solution for secondary packaging in beverage production and industrial packaging environments. Designed to handle PET and Glass containers, it delivers dependable performance for high-volume applications in a used bottling line or as a standalone packer. The machine supports film-only bundles with the current format set for 1.5 L bottles in a 3x2 configuration, making it ideal for multipack distribution.Manufacturer: SMIModel: APET 143/DFYear of construction: 1998Maximum speed: 14,000 (unit per hour as specified)Current package format: 1.5 L, 3x2Container materials: PET, GlassMaximum container height: 380 mmWork table height: 1250 mmMachine pitch: 545 mmNumber of film reels: 2Maximum film reel diameter: Ø 500 mmPackage type: Film only (no tray)Adva ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorToolchanger with twin-grippertoolchanger with twin-gripperType of magazine ChainNumber of tools 40CabineFull protection cabinPackage Mill / Turn 20,000 rpm, H ...

General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-20000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1700 NmMain drive 1Drive power (100% DC)40 kWSpeed range- 2 ...

New equipment, never used Used to renew the ambient air in the home and to heat the rooms as an add-on. Ideal for isolated sites thanks to its complete autonomy, including those occupied only occasionally during the year, keeping the home frost-free and healthy. With TWINSOLAR Duo, up to 90m3 of heated fresh air is introduced into the room. Depending on the amount of sunlight, the speed of the fans is more or less important, so is the volume of air blown. TWINSOLAR Duo requires very little maintenance, only the replacement of one filter per year. Flexibility, lightness, efficiency Lightweight and discreet - only 106mm thick for a weight of 22kg. 4mm tempered glass. Aluminum frame resistant to seawater and salt air High-performance aluminum laminar absorber Insulation with 50 mm mineral wool resistant to extreme temperatures 2 Sensor-integrated fans with DC motor, low noise and long s ...

New equipment, never used Used to renew the ambient air in the home and to heat the rooms as an add-on. Ideal for isolated sites thanks to its complete autonomy, including those occupied only occasionally during the year, keeping the home frost-free and healthy. With TWINSOLAR Duo, up to 90m3 of heated fresh air is introduced into the room. Depending on the amount of sunlight, the speed of the fans is more or less important, so is the volume of air blown. TWINSOLAR Duo requires very little maintenance, only the replacement of one filter per year. Flexibility, lightness, efficiency Lightweight and discreet - only 106mm thick for a weight of 22kg. 4mm tempered glass. Aluminum frame resistant to seawater and salt air High-performance aluminum laminar absorber Insulation with 50 mm mineral wool resistant to extreme temperatures 2 Sensor-integrated fans with DC motor, low noise and long s ...

New equipment, never used Used to renew the ambient air in the home and to heat the rooms as an add-on. Ideal for isolated sites thanks to its complete autonomy, including those occupied only occasionally during the year, keeping the home frost-free and healthy. With TWINSOLAR Duo, up to 90m3 of heated fresh air is introduced into the room. Depending on the amount of sunlight, the speed of the fans is more or less important, so is the volume of air blown. TWINSOLAR Duo requires very little maintenance, only the replacement of one filter per year. Flexibility, lightness, efficiency Lightweight and discreet - only 106mm thick for a weight of 22kg. 4mm tempered glass. Aluminum frame resistant to seawater and salt air High-performance aluminum laminar absorber Insulation with 50 mm mineral wool resistant to extreme temperatures 2 Sensor-integrated fans with DC motor, low noise and long s ...

New equipment, never used Used to renew the ambient air in the home and to heat the rooms as an add-on. Ideal for isolated sites thanks to its complete autonomy, including those occupied only occasionally during the year, keeping the home frost-free and healthy. With TWINSOLAR Duo, up to 90m3 of heated fresh air is introduced into the room. Depending on the amount of sunlight, the speed of the fans is more or less important, so is the volume of air blown. TWINSOLAR Duo requires very little maintenance, only the replacement of one filter per year. Flexibility, lightness, efficiency Lightweight and discreet - only 106mm thick for a weight of 22kg. 4mm tempered glass. Aluminum frame resistant to seawater and salt air High-performance aluminum laminar absorber Insulation with 50 mm mineral wool resistant to extreme temperatures 2 Sensor-integrated fans with DC motor, low noise and long s ...

New equipment, never used Used to renew the ambient air in the home and to heat the rooms as an add-on. Ideal for isolated sites thanks to its complete autonomy, including those occupied only occasionally during the year, keeping the home frost-free and healthy. With TWINSOLAR Duo, up to 90m3 of heated fresh air is introduced into the room. Depending on the amount of sunlight, the speed of the fans is more or less important, so is the volume of air blown. TWINSOLAR Duo requires very little maintenance, only the replacement of one filter per year. Flexibility, lightness, efficiency Lightweight and discreet - only 106mm thick for a weight of 22kg. 4mm tempered glass. Aluminum frame resistant to seawater and salt air High-performance aluminum laminar absorber Insulation with 50 mm mineral wool resistant to extreme temperatures 2 Sensor-integrated fans with DC motor, low noise and long s ...

New equipment, never used Used to renew the ambient air in the home and to heat the rooms as an add-on. Ideal for isolated sites thanks to its complete autonomy, including those occupied only occasionally during the year, keeping the home frost-free and healthy. With TWINSOLAR Duo, up to 90m3 of heated fresh air is introduced into the room. Depending on the amount of sunlight, the speed of the fans is more or less important, so is the volume of air blown. TWINSOLAR Duo requires very little maintenance, only the replacement of one filter per year. Flexibility, lightness, efficiency Lightweight and discreet - only 106mm thick for a weight of 22kg. 4mm tempered glass. Aluminum frame resistant to seawater and salt air High-performance aluminum laminar absorber Insulation with 50 mm mineral wool resistant to extreme temperatures 2 Sensor-integrated fans with DC motor, low noise and long s ...