oil mill used for sale

Gas and oil burners, oil burner filters, heating oil filters, filter and deaerator units, heating oil deaerators -Manufacturer: oilon, filter and vent unit unused, original packaging -Type: Oilon Plus -Technical data: see photo of the nameplate -Cardboard dimensions: 370/180/H150 mm -Weight: 1.8 kg

Nominal Rating 1000 l/h; prepared - top condition

Atlas Copco SF 15 Oil-Free Scroll Compressor The SF series uses scroll technology, where there is no metallic contact with the compression elements, which is why absolutely no oil is needed in the compression chamber. This makes the system ideal for applications that require completely clean and oil-free compressed air (e.g. in the laboratory, medical or food sectors). The three installed scroll compressor elements were recently overhauled or replaced. Operating hours (total): 15,983 hours (The actual time the compressor has been running since 2001). Regulator hours: 99,527 hours (the time the controller was energized). Runtimes of the individual scroll elements (compressor stages) Operating hours Element 1: 735 hours Operating hours Element 2: 735 hrs Operating hours Element 3: 736 hrs Technical data: Manufacturer: Atlas Copco Model / Product Type: SF 15 (Oil  ...

Manufacturer: Single Temperiertechnik GmbH Model No.: Advanced Oil D2-180-18-0 Year of Make: 2016 Heating capacity: 18 kW Specific heating capacity: 23.2 kVA Rated current: 32 A Supply Voltage: 3×400V/N/PE Frequency: 50 Hz Max. temperature: 180 °C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: Heat transfer oil External capacity max.: 22 litres Net weight: 169 kg Device dimensions: Standard design (according to device type) Application: Temperature control for industrial processes, tools, plant modules Location: Schierling

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 600 l/h power heating heater / oil boiler 55 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Oil consumption 6 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1000 l/h power heating heater / oil boiler 90 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 430 kg Oil consumption 10 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 2000 l/h power heating heater / oil boiler 180 kW Electrical power 1.8 kW Electrical connection 230V 5 0Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm Weight 492 / 600 kg Oil consumption 19 kg/hr ; New machine - best condition

motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

UNDER NEGOTIATION HUSKY GL300 System 48mm +3025 +Edible Oil 32mm + 2921 molds OPPORTUNITY HUSKY GL300 YEAR 1998 MOLDS + 48mm water neck finish 32 cavity complete mold (hot runner) with 2 sets of core (81gr~85gr~91gr.) + 30/25 water neck finish 48 cavity complete mold (hot runner) with 1 core set (16~18.2 gr) + 32mm edible oil (snap on)(wide edible oil) neck finish cold half mold with core set (24~27gr.) + 29/21 edible oil 25 gr neck finish preform change over kit. Auxiliaries: Piovan mold dehumidifier, resin dryer with hopper, and T conveyor 400v 50hz Condition: Fair condition, connected (can be inspected) More pictures upon request USA Line: +1 305 831 8888 whatsapp +5491157143569 j.plaul@optimisense

Electro-hydraulic Space requirement mm: 3000x1500 Lifting height max mm: 2000

QTY 1 x TMP (Division of French Oil, USA) Techni-Mix Lab Mixer, Model HD-5,  Year of manufacture: 2014 (New),  CE Marked, Mixing capacity: 5 Litre, 2 wing tangential rotors, Pneumatic hopper, Tilting body discharge (easy for cleaning), 20HP AC variable speed motor, Rotor rpm - Front 47.55rpm, Rear 39.28rpm. Complete with Electrical controls and in excellent condition.

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

Thermopöl Pump Magnetic Pump for Daub Heuft Thermal Oil Furnaces

Double-walled steel tank. Price is negotiable. Shipping possible. The sale is carried out on behalf of the customer. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Mounting frame quick coupler Oilquick OQ 80 for sale, gladly

GM 1207 thermal oil plant consisting of: 4 wagon ovens 1 central heating system with gas burner Total baking area: 48 sqm Manufacturer: MIwe Year of construction: 2002 Condition: very good dismantled in stock Pratteln Specifications: 4 trolley ovens for 2 baking trolleys each with 10 supports Baking area per oven: 12 sqm Central heating system: Gas, 350 Kw 18 baking trolleys with 10 pads for: Baking trays: 600 mm x 1000 mm Footprint per furnace: W 1600 mm x D 3100 mm x H > 3000 mm Side by side: W 8000 mm x D 3100 mm x H 3000 mm

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Wartsila 8L32 Oil Pump 1Piece available in our stock in Turkey Model: 1v18L36 Original in good condition

GE Oil & Gas Nuovo Pignone Steam Turbine – Model SC1-10 For sale: Industrial Steam Turbine manufactured by GE Oil & Gas (Nuovo Pignone). Model SC1-10 (Equipment Tag: 661-KT-4101). This equipment is decommissioned and ready for transport. Ideal for power generation or as a mechanical drive for heavy-duty industrial compressors in refining, petrochemical, or power plants. Key Specifications: Manufacturer: GE Oil & Gas / Nuovo Pignone Equipment Type: Steam Turbine Model: SC1-10 Equipment Tag: 661-KT-4101 Condition: Used / Decommissioned. Location: Spain Status: Ready for immediate dismantling and transport. Please contact us for more information, technical datasheets, performance curves, or to arrange a site inspection.

GE Nuovo Pignone Backpressure Steam Turbine – Model SNC1-2 For sale: Industrial Backpressure Steam Turbine manufactured by GE Oil & Gas (Nuovo Pignone). Model SNC1-2 (Equipment Tag: 661-KT-3301). The equipment is decommissioned and prepared for safe transport. Ideal for mechanical drive applications or cogeneration in industrial plants, refineries, and petrochemical facilities. Key Specifications: Manufacturer: GE Oil & Gas / Nuovo Pignone Equipment Type: Backpressure Steam Turbine Model: SNC1-2 Equipment Tag: 661-KT-3301 Condition: Used / Decommissioned. Location: Spain Status: Ready for immediate dismantling and transport. Please contact us for more information, technical datasheets, performance curves, or to arrange a site inspection.

Used Used oil filler Rcm 16 valves: Year: 1998 Condition: As Is Used oil filler Rcm 16 valves year: 1998 speed: 2.000 bph clockwise directions safety protections working machine Code: T 11 More details: https://bottlingscout.com

Used Used filler for oil 14 valves 2.000 bph: Year: 2004 Condition: As Is Used filler oil | 2004 Year: 2004 Speed: 2.000 bph Direction: clockwise Number of valves: 14 Type of filling: high vacuum Type of product: oil Safety protections Code: T 174 More details: https://bottlingscout.com

Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Electr. connection: 400 V 3-ph, 16 A Compressed-air connection: 6 bar, oil-free Working pressure: 0,1-0,5 bar condition: Renovated In store Made in Germany Description release agent spray unit

General SKU316W638 LocationBarneveld CEcheck MakeBecker Pressure Working pressure0.8 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250000 Ltr. Motor5.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity250 m3/h With motor5,5 kW (400 V, 950 rpm) Inletø 55 mm Outletø 60 mm MaterialStainless steel General TypeVTLF 250 Mach.No.1408323 Year of construction1996 Floorspace1,10 x 0,65 m Total height0,70 mGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsVacuum pumpsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMine ...

General SKULT016 LocationSpain CEcheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck 3-Phase decantercheck Screw diameter280 mm Screw length1260 mm Motor15 kW Max. rotor speed4400 rpm MaterialStainless steel General MakeAlfa Laval TypeAvocado oil line - 3 phase With switchgearThe equipment does not come with a control panel Extra information Extra Specificationswith: - 3x termo-blender Alfa Laval ATMOSPHERA® Round Malaxer, 650 Ltr. each. - Centrifugal Separator, Alfa Laval UVPX 507, throughhput capacity: 2,7 m³/h, feed temp.: max 100 °C, operating liquid density: max. 110 kg/m³, discharge volume: 7,5 Ltr., motor: 5,5 kW - Reception and washer, 1500 kg per hour - Stoner, pulper, 1500 kg of raw fruits, 1000 kg of pulp in exit - 2x Screw pump, 1,5KW with speed variator - 2x Screw conveyor, 5 m long, 2,2 kW - Tank fo ...

General SKU316W639 LocationBarneveld CEcheck MakeBecker Pressure Working pressure0.8 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume250000 Ltr. Motor5.5 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity250 m³/h With motor5.5 kW (400 V, 950 rpm) Inletø 55 mm Outletø 60 mm MaterialStainless steel General TypeVTLF 250 Mach.No.1563199 Year of construction1999 Floorspace1,10 x 0,65 m Total height0,70 m Weight350 kgGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsVacuum pumpsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlast ...

General SKU312X1454 LocationBarneveld MakeAura Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4552 General Serial113819/1 TypeTST 140/8/185 – 25(50)/32 Year of construction2011 Mounted on framecheck Floorspace11 23 Total height1,9 Weight1000 Extra information Extra SpecificationsThermal oil secondary control circuit / temperature control station (heating duty)Heat transfer medium: thermal oil (Mobiltherm 603)Heating capacity: 140 kWSupply temperature from heater: 200°CCirculation pump: 8 m³/h, 9 m head, 1.1 kW, 1450 rpm, 3 × 400 V / 50 HzElectrical control cabinet section with main switch, E-stop, pump/heater controls, and indicator lamps (as is)Generic medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDet ...

One is 95% complete and the other is 70% complete, with propulsion and navigation systems ready.

Maximum pressure 10 Bar ( Reader 10Bar press relief valve) Highest temperature allowed: 120 Celcius Lowest temperature 0 Celcius Internal volume 98 liters Heating Capacity: 63 KW

Oil cooler, air-oil cooler, heat exchanger unused. Manufacturer: SEW Type: OAC1 50-710 Year: 2020 Permissible. Temperature: 90 °C Capacity: 42 l Cooling capacity at 40°C air / 70 °C oil: 27.7 kW 380 V Pump KRACHT KF 50 68.2 l/min at 1500 rpm 4 kW Fans 1.1 kW 940 rpm Dimensions approx. 2100 x 1500 x 1200 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

We are offering for sale a complete used VAS thermal oil system built in 2003 thats fully functional . Technical Specifications: - Thermal output: 6 MW - Electrical output: 1.1 MW (ORC) - Year of construction: 2003 - Note: ORC module available for separate purchase System Components : - Material supply system - Firebox with grate - Thermal oil boiler, heat exchanger, and Eco unit - Thermal oil piping, components, thermal oil, and insulation - Filter system - Chimney system and flue gas ducts including insulation - ORC module and generator - Ash disposal and ash container - Hydraulic units including lines and hydraulic oil - Electrical system and control cabinets - System control including PC and software - Air compressor, dryer, compressed air tank, and compressed air lines - Aboveground heating network including insulation, heating valves, and heating pumps - Overhead crane - Water  ...

Oil separator for the compressor Alup Aquamat - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Oil separator for the compressor Alup Aquamat Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Oil separator for the compressor Alup Aquamat Price: 170 EUR Download PDF Oil separator for the compressor Alup Aquamat Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. Subscribe to our newsletter to receive information from us about product news, promotions and information from our company. Save © 2022 by  ...

General SKU296U565 MakeWAB-Bachhofen LocationBarneveld TypeKD 45 Main Features MaterialStainless steel Volume45 Ltr. Motor33 KW Specified Features - Sand mill Horizontal sand millcheck Capacity45 Ltr. Housing dimensions Dia: 290x750 InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor33 kW, 380Volt,985rpm (EX) Rotor speed985rpm With ballscheck CapacityCap. range 180-1000 l/h With pumpPonndorf, PX15 Motorcheck Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) With jacketcheck General No.760735 Year of construction1976 With switchgear(as is) Floorspace1,4x1,0 m Total height1,8 m Weight1200 kg ATEX designedcheckStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsMinerals & inorganicPaints & coatingsWab BachofenIndustries > Food & Feed > StarchIndust ...

General SKU296U567 MakeDYNO-MILL WAB Bachofen LocationBarneveld TypeKD 60 Main Features MaterialMild steel/Stainless steel Volume60 Ltr. Motor45 KW Specified Features - Sand mill Horizontal sand millcheck Capacity60 Ltr. Housing dimensions Dia: 290x960mm InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor45 kW, 350/660Volt, 1475rpm Rotor speed900rpm Without ballscheck Capacitycap. range 200-1300 l/h With pumpcheck Motor0,37kW,230/400Volt, 1375rpm MaterialMild steel, stainless steel 1.4000 (aisi 429) With jacketcheck General No.910820 Year of construction1991 Floorspace2,1x1,3 m Total height1,8 m Weight1500 kgStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsMinerals & inorganicPaints & coatingsWab BachofenIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & ...

General SKU214X079 MakeUnknown LocationBarneveld TypeUnknown Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variator3-36 rpm With temperature control20-270°C Electrical heatingcheck General No.Unknown Year of constructionUnknown With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm&:nbsp:RubberMixing mills-Industries > Chemical > RubberPlastic machinery > Mixing millsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in B ...

General SKU291Y514 LocationBarneveld MakeFryma Main Features MaterialStainless steel Motor11 KW Inlet diameter30 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 180 x 28 mm Teethed rotorcheck With hoppercheck Inletø 30 mm Outlet200 x 60 mm Motor± 11 kW, (380 V) MaterialBrass, Stainless steel 1.4408 General TypeML180 Year of constructionunknown Floorspace0,5 x 0,7 m Total height1,15 m Weight220 kg Extra information Extra SpecificationsThroughput range 1,000–12,000 L/hr. Achievable particle size 0.5–5 mm. Lochscheibenmühle Generic medicinesOintmentsBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicPaints & coatingsOils & fatFrymaIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries >  ...

General SKU291Y527 MakeKarl Schnell Type062-F282-248 No.Unknown Year of constructionUnknown Motor Motor power21 kiloWatt Main Features MaterialAluminium/Stainless steel Motor21 KW Inlet diameter200 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 240 x 155 mm With hoppercheck Inletø 200 mm Outlet185 x 75 mm Motor21 kW (380 V, 2880 rpm) Speed2880 rpm Material1.0257 St 44.4, Stainless steel 1.4305 (303) General LocationBarneveld With switchgear(as is) Floorspace0,6 x 0,9 m Total height1,7 m Weight500 kg Extra information Extra SpecificationsMet Fryma ML180 molen Generic medicinesOintmentsBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicPaints & coatingsOils & fatKarl SchnellIndustries > Pharmaceutical > Generic medicinesIndustries ...

General SKU291Y475 LocationBarneveld MakeKarl Schnell Motor Motor power55 kiloWatt Main Features MaterialStainless steel Motor55 KW Inlet diameter165 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 220 x 50 mm With hoppercheck Inletø 165 mm Outletø 100 mm Motor55 kW (400 V 2880 rpm) Materialstainless steel 1.4006 (AISI 410) General Serial42942 Type080 F248 Mounted on framecheck Floorspace1,15 x 1,00 m Total height1,55 m Weight700 kg Extra information Extra SpecificationsWithout perforated disc. 55 kW Generic medicinesOintmentsBiotechnologyFeed additivesColloid millsDetergent & surf.CosmeticsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalMinerals & inorganicPaints & coatingsOils & fatKarl SchnellIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Biotechn ...

Stock # U2267-2 Second hand stainless steel contact parts (316Ti) sand mill by Drais (Germany) model Perl-mill PMC 12.5 TEX. Machine has total volume of milling chamber 17.2 l and working volume about 12 l. Mill has rotor with plastic rings and works with rotation speed up to 1450 rpm. Machine is driven via belt gearbox by electric motor 13.5 kW, 1500 rpm, 400 V, 50 hz, Eex eIIT3 design. Mill is equipped with feeding pump, filter and electric cabinet. Includes technical documentation. Machine new 2002.

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

GINES, Barcelona 800mm wide x 350mm dia two roll mill, Machine number: 88, manual nip adjustment, adjustable guide plates, friction ratio 1:1.18, direct drive gearbox (on left hand side), with 60HP DC variable speed motor, Mentor II DC drive control panel. O/a dimensions 2750mm x 2100mm.

5 axis machininng center (milling/turning from bar) multitasking Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 ? 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min ...

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm