129,840 used machines on RESALE, but how to find them? Machine Search
Specifications Control Siemens Sinumerik 840 Dsl Main dimensions and travels Face plate diameter 3,500 mm Circumferential diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Crossbar Vertical adjustment of the crossbeam 1,500 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Stations Crossbeam Support (Left) Horizontal adjustment support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool Changer Main Drive: Main motor power 100 kW Face plate speed range 1-100 rpm. Maximum torque at the face plate 100 ...
Stationary high-pressure pump unit Hammelmann HDP 77 on base frame. Similar/no Uraca, Woma, Kamat Pump type: HDP 77 Operating pressure: 490 bar Flow rate: 59 l/min. Drive speed: 1800 RPM Drive power: 65 kW with AC 55 kW 3 motor AH 250 M-4; 400V; 50 Hz Dimensions LxWxH: approx. 1665x1212x1641 mm Weight: approx. 1050 kg Built: 2008 Condition: in very good used condition. Includes complete documentation.
Key data: 4000 mm, 5000 mm
Specifications Control SIEMENS SINUMERIK 840 Dsl Main dimensions and travels Face plate diameter 4,000 mm Circumferential diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Crossbar Vertical adjustment of the crossbeam 3,200 mm in 50 steps Crossbeam Support (Right) Horizontal adjustment support - 2740 + 2740 mm Vertical displacement of the chisel slider 1,800 mm Cross-section of the chisel slider 250x210 mm Side Support (Right) Vertical adjustment support -25 + 2170 mm Horizontal displacement of the chisel slider 1,000 mm Cross-section of the chisel slider 250x210 mm Turning diameter max./min. 4,500/2,500 mm Main Drive: Main motor power 100 kW Face plate speed range 0.63 – 63 rpm. Maximum torque at the ...
STATIONary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat Operating pressure: 400 bar Flow rate: 56 l/min. Drive speed: 1,475 RPM Drive power: 44 kW with SIEMENS 45 kW 3 motor 1LA6 223-4AA60 225M IP 55 with URACA MSÜV 16/700 and PSV8/800 valves Dimensions LxWxH: approx. 1300x1100x1400 mm Weight: approx. 1.115kg Built: 1995 Condition: in good used condition.
Pos. 1.0 Precision Rotary Table Make EIMELDINGEN with aerostatic axial bearing Specifications Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamping 2,400 daNm Table speed 0.002 – 2 min Net weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. 3 phases Control voltage 24V Positioning accuracy (without control errors) ± 1" Plan accuracy 0.02 mm Axial running accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the displacement measuring systems 0.0001° Pos. 2.0 3-Axis Cross Bed Boring Mill Specifications Column stroke transverse "X" 500 mm Carriage stroke horizontal "Z" 650 mm Spindle box vertical "Y" 800 mm Rapid traverse speed Y + Z 8,000 mm/min Feed speed (infinitely adjustable) 0-1000 mm/min ...
Analog module, brand new, CPX-4AE-P-D10, 560362, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. The parts were taken from a brand new valve assembly in its original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. Buy more than 1 position there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aust ...
Qty. 1 Second-hand aluminium strip casting line – stopped in 1/2020 Manufacturer: Shinkwang Type: 2 Roll Casting Built: 2013 Strip Width: 420 - 1,010 mm Strip Thickness: 5∼7 mm Line Speed: 2 m/min (max) Coil Weight: 7,000 kg (max) Power: 45 kW (DC) Cooling Water: 550 m³/h
Machine type MIG/MAG welding system Make MERKLE Type CompactMIG 400 K Connection voltage 3 x 400 volts Adjustment range 25 - 400 amperes Switch-on time 35% ED at 400 amperes 60% ED at 310 amperes 100% ED at 230 amperes Current setting 14 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Execution of mobile industrial plant Wire feed 4-wheel gearbox DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 480 x 760 mm Weight 140 kg Special accessories display, automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 307 G, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non ...
Vacuum transport belt; State outdated; Length 2000mm; Working width 350mm; Speed adjustable; Forward or reverse running; new inverter; new conveyor belts; Stand allone. BVM vacuum transport band; condition rebuilt; lenght 2000mm; working width 350mm; speed adjustable; forward operation or reverse operation; new frequency inverter; new belts; stand allone machine.
Used manual filter press, external plate size 40x40 cm (filter area 35x35 cm), 20 middle plates + 2 external plates. Cake thickness 2 cm.
Matsuura MC600VF Vertical Machining Centre in great working condition ready to use. COOLING TROUGH SPINDLE YEAR: 1997 with Yasnaz i80M Control, Table size 870 x 400mm, 20 Position ATC, BT40 Taper, Spindle Chiller, Coolant Tank, X = 600 Y = 410 Z = 470mm, Spindle Speeds 30 – 8000rpm. S/No. 970112285 including Large Qty of BT40 Tooling (33 TOOLS, Universal 3D Tester. Country of Origin: Japan. INCLUDED AS WELL BACK UP PARAMETERS.
Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of continuous strokes per min: 10 The highest frequency of single strokes per min: 7 Closed height: 1180 mm Adjustment of closed height: 200 mm Slider's dimensions: -From left to right: 5000 mm -From front to back: 2000 mm Dimensions of the plate of the die: -From left to right: 5000 mm -From front to back: 2000 mm Capacity of the main drive: 250 kW Overall dimensions: -From left to right: 7640 mm -From front to back: 5980 mm -Height above floor level: 10490 mm
Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg
Description Volume flow 480 litres/min. 16.9 m3/h Pressure max. 10 bar Nominal power 4 kW Noise level 76 dB Voltage: 400 V Tank: 200 litres Weight: 140 kg Dimensions: 1460 x 640 x 1140 mm
Oven 450 inner dimensions 2x2x6m PLC Uterna / Europe custom made oven Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwagenöfen Kammeröfen Haubenöfen Drehherdöfen Thermische Nachverbrennungsanlagen forno a camera per trattamento termico alluminio forno a carro per trattamento termico alluminioforno a carro per trattamento termico alluminio forno a carro per trattamento termico alluminio forno continuo per trattamento termico alluminioforno continuo per trattamento termico alluminio forno continuo per trattamento termico alluminio linea batch per trattamento termico alluminiolinea batch per trattamento termico aliuminio forni industriali da ...
Machine type MIG/MAG welding system Make MERKLE Type OptiMIG 451 KW Connection voltage 3 x 400 volts Adjustment range 25 - 450 amperes Switch-on time 40% ED at 450 amperes 60% ED at 420 amperes 100% ED at 340 amperes Current setting 42 switching stages Cooling transformer due to built-in fan Cooling burner water-cooled Execution of mobile industrial plant Wire feed gearbox 4-wheel transmission DV 26 Fuse 32 Ampere Dimensions L x W x H 990 x 510 x 845 mm Weight 200 kg Special accessories Volt and Ampere digital display Automatic wire Age 12 months Condition workshop-tested, as new, incl. UVV workshop test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqmm 1 piece pressure reducer Argon with 2 pressure gauges 1 piece spare part box ...
SF 444n-8 Feed apparatus standard with 8 speeds 3.5-5-7-10-12-17-26-34 m/min ideal guidance of the workpiece thanks to 4 roller system every working position can be easily adjusted via two-rod tripod right/left run 2 step motor Precision gearbox ensures precisely uniform feed speed and long service life G&HM-SF444-8
Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041
Type: Engine, Type number: 12V71 7123-7305 GENERATOR 438KVA
description: Design : Cast resin transformer Design: Dry Make : SGB Built: 2010 Condition: New Btz0idkxtd Rated power: 1000 KVA Medium voltage: 10 KV +- 2 x 2.5% Low voltage: 400 V Switching group : Dd6Y 5 Frequency: 50 Hz Cooling type :AN Total weight: 2410 Kg Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery included. For further questions, contact i.m. Mon to Sat 8 a.m. to 10 p.m.
Bread cutter Wabäma Model: R 400 EX The all-rounder among bread slicers EX model for installation in the sales counter! Max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular cutting machine with bread halving Round blade made of high-quality Teflon special coating Circular knife machine mobile Cutting thickness adjustable from 4 to 25 mm DGUV V3 tested Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 750 x 860 mm, WxDxH Used machine cleaned 6 months warranty Option: Maintenance contract Spare blade Service Package Delivery & Installation Instruction & Commissioning We have a wide range of bread slicers!
40,000 litres of earth tank for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 8,70m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and A-deck capsule according to DIN 1 ...
Cutting length mm: 4500. Cutting depth mm: 4500 Number of pliers: 7 Installed power KW: 15 Diameter saw blade mm: 300 Vorritzer: Yes Discharge tables pneumatic: 3 Weight Kg: 3100 CE marking
Second-hand machine type Pester Pewo pack 450 Pester PEWO-Pack 450, built in 2003 only 2700h operating hours For tightening insulating individual and collective containers with PE film in the pharmaceutical cosmetics and food industry The technically high-quality series equipment includes: - compact and stable design in modular design - Control console with 4-line plain text display for the following, piece counter, speed display, hour counter, temperature monitoring, general fault indicator - Wear-free, infinitely adjustable, patented tightening system - Product protection by means of safety monitoring by means of light barriers in the closing area - Film monitoring, advance warning with optical and acoustic display as well as machine stop at the end of the film or film tear - Single aeration - Machine mobile, i.e. it has steering and buck rollers for internal transport, ...
Bread Slicer Circular Knife Machine Wabäma Model: R 400 The all-rounder among bread slicers Max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular cutting machine with bread halving Counter and preset for number of discs with integrated drawer Round blade made of high-quality Teflon special coating Machine mobile with brake Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 720 x 1110 mm, WxDxH Used machine cleaned 3 months warranty Option: Maintenance contract Spare blade Service Package Instruction & Commissioning Wide range of bread slicers
M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...
maximum number of results exceeded
please refine your search
