new gas generator used for sale

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

New BEL M314Ai Laboratory Balance - 310g - 0.1mg New equipment in its original packaging Technical Parameters: Precision Balance Reference M314Ai Legibility: 0.1 mg (10-4 g) Maximum capacity: 310 g Repeatability: 0.1 mg Linearity: 0.3 mg Response time of less than 4 seconds Dimensions of the top: diameter 80 mm Chamber dimensions (W x D x H): 162 x 171 x 225mm Net weight approx. 6.6 kg Scale dimensions (W x D x H): 215 x 345 x 345 mm

Here is a list of available equipment for pipes and profile extrusion from EU constructors., New equipment is constructed by renouned German Constructors, Used equipment is in good working conditions, Check the PDF list below and revert to us with your inquiries., Be very specific in yuoe questions and please don not forget to give your full contact, yourname, your Company name, Country, Whatsapp and phone no. Well be happy to assist you.

7 pallets, Overall dimensions: 1.30 x 0.40 m, Cover dimensions: 1.25 x 0.36 m, including ridge caps and edge strips, and ridge vent caps, galvanized sheet metal, palettes from left to right, - Palette: approx. 268 pieces powder-coated, - Palette: approx. 258 pieces powder-coated, - Palette: approx. 335 pieces of galvanized sheet metal with anthracite powder-coated finish (smooth), - Palette: approx. 304 pieces powder-coated + 4 ridge caps, - Palette: approx. 262 pieces powder-coated, 11 pieces red powder-coated, 18 pieces edge cover, 5 pieces ridge vent caps, - Palette: approx. 111 pieces powder-coated, 30 pieces edge cover, 20 pieces ridge caps, - Palette: approx. 225 pieces powder-coated

FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, installed power - used power in work: about 60-65% : 30

Zum mixen aller Flüssigkeiten bis zu einer kinematischen Viskosität von v=11000mm²/s - z.B.von Wasser, Öl,Alkohol Wein Säfte Milch usw. Spannung 380 Volt / 220 Volt Amper 10-16

New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletiser with lifting frame, Capacity: 140 layer/h, Power: 8,75 kW, Voltage: 230/400 Volt, Frequency: 50 Hz, Compressed air: 5,0 bar; 8,0 Nm³/h, Length: 4020 mm, Width: 3400 mm, Height: 5425 mm, Weight: 3800 kg, Formats: europalett (1200 x 800 x 140 mm), Operation / Control: control box / Siemens S7, Material: Painted mild steel, Position: free standing ...

Technical Specifications & Performance Data The New Filling / Capping Monoblock 24.6 is engineered for accurate, high-speed oil filling and secure press-on capping in a compact, hygienic frame. Designed for modern industrial packaging environments, it combines weight-based filling precision with consistent closure application to maximize uptime and quality. Rated output: up to 11,000 bottles/hour (application-dependent) Filling system: load cell–controlled, gravity-fed, contactless nozzles; atmospheric operation with weight-based dosing Accuracy: per-valve weigh control; gram-level resolution per liter for consistent net-weight results Filler configuration: 24 filling valves Capper configuration: integrated press-on capper, 6 heads Closure type and size: plastic press-on caps, 28–30 mm Bottle formats: 0.06 L, 0.375 L, 0.50 L, 0.75 L Container material: PET (primary compatibility) Pro ...

New Light Depression/Gravity Filling Triblock Isobaric Filling Monoblock. The displayed photos are of model 12-12-1 (12 rinser 12 filling nozzles, 1 capping head) Low vacuum/Gravity Filling Monoblock and the machine comes without a rinsing machine This new Low vacuum/Gravity filling monoblock. Automatic rotary system to fill flat and low density liquids. The opening of the filling valve is actuated by its contact with the neck-finish of the container raised by the supporting cylinder. The range of configurations and options allow great flexibility of use. PRODUCTION SPEED The production speed is configurable from 1.000 up to 24.000 bph FILLABLE ​BOTTLE TYPES Glass – PET and other polymers ​RINSING (Optional) One or two treatments with fixed or dynamic nozzle ​CAPPING/SEALING All main capping systems: Cork, ROPP Aluminum Screw cap, Plastic screw, Crown, T stopper, Pressure stopper ...

New Isobaric Filling Monoblock for cans Displayed photo is for model 6-1 and 9-1 (6 or 9 filling nozzles, and 1 capping head) This Isobaric Filling Monoblock system is designed for the pressure canning of carbonated (and still) products following market standards. The automatic process purges the can of CO2 just before the pressure filling and immediately before the application of the lid. The single-head seaming system has been designed and is manufactured in house. Configurable Filling/Capping 6/1 – 9/1 – 12/1 ​PRODUCTION SPEED OF ISOBARIC FILLING MONOBLOCK Configurable from 1.650 up to 6.000 cph BOTTLE Aluminum can (all main standards on the market) RINSING (Optional) One or two treatments with fixed or dynamic nozzle ​ CAPPING/SEALING Easy open lid seaming ​ GENERAL CHARACTERISTICS • Chassis and structure manufactured in inox steel AISI 304 • Transmission of the working ...

New Isobaric Filling Monoblock Displayed photo of the model 20.20.4.4 and 16.24.4.4. (20 or 16 rinsing pincers, 20 or 24 filling nozzles, 4 + 4 capping heads or 1 + 1 capping heads) and model 36-9 (36 filling nozzles, 9 capping heads) Isobaric Filling Monoblock and the machine comes without a rinsing machine Counter pressure ìsobaric mechanical system (Electropneumatic option also) New Isobaric Filling Monoblock System designed for the filling of carbonated products such as water and soft drinks. The range of configurations and options allow great flexibility of use. ​PRODUCTION SPEED Production speed is configurable from 1.000 up to 24.000 bph ​CONTAINER Glass – PET and other polymers ​RINSING The rinsing phase can have one or two treatments with fixed or dynamic nozzle CAPPING/SEALING The most widespread capping systems for specific applications can be included ​ GENERAL CHA ...

Technical Specifications & Performance Data The Bertolaso 30/30/4 filling monoblock is a 2021 NEW unit engineered for PET and glass bottles in beverage production, combining rinsing, filling, and capping in a compact, hygienic unibloc. Designed for accurate, repeatable performance on flat drinks and juice, it delivers excellent process control for industrial packaging environments. Manufacturer/Model: Bertolaso 30/30/4 Year/Condition: 2021, NEW, zero operating hours Rated speed: up to 6500 bph Monoblock configuration: 30-gripper rinser, 30-valve filler, 4-head capper Container materials: PET and glass Bottle dimensions: diameter 52±2 mm to 100 mm; height 180 to 360 mm Minimum internal neck: 18.5±0.5 mm (16 mm filling valve) Closures supported: aluminum screw caps 28x18, 28x35, 31.5x18; 31.5x24 with pourer; plastic press-on 30x20 Rinser: 30 grippers, single-treatment, 3–6 bar water su ...

New PET filling monoblock for CSD up to 15000 bph System Overview: The Unibloc 50 50 10” model by UBL SRL is an integrated bottling system, designed to operate with a maximum capacity of 15000 BPH. Its architecture combines three main functions: rinsing, filling and closing in a single monobloc. Rotary Rinse in the New filling monoblock for CSD: The rinsing section includes 50 heads, configured to process PET bottles. The design allows for effective and rapid washing, essential for maintaining hygiene standards. Counterpressure Filling: The filling module uses 50 isobaric valves to ensure uniform and precise filling. The isobaric system is particularly advantageous for carbonated drinks such as soft drinks and sparkling water, minimizing the loss of CO2 during filling. Screw Closure: The sealing section is equipped with 10 rotary heads for applying plastic screw caps. This mechanism en ...

Technical Specifications & Performance Data The Nortan New Sleever Machine Unwinder 2022 is a single-station supply module designed to feed shrink-sleeve material reliably to a sleeve applicator within a labeling section of a used bottling line or new beverage production setup. Engineered for high-throughput industrial packaging, it ensures steady web delivery to maintain consistent labeling quality across diverse formats. Manufacturer: Nortan Model: Sleeve Year of manufacture: 2022 Category: Labeling Machine – sleeve material unwinder Number of stations: 1 Nominal speed: up to 20,000 bundles/hour Container types supported: PET, glass, aluminum Product applications: water, juice, beer, wine, and related beverages Condition: In storage Included: Safety features, operating manuals Label feed: Continuous sleeve web unwinding for shrink-sleeve application Advanced Automation & Control Syst ...

Technical Specifications & Performance Data This automatic shrink wrapper with welding bar is engineered for reliable multi-row collation and high-quality bundling in beverage production and broader industrial packaging environments. Designed for in-line or 90° infeeds, it handles film-only multipacks as well as packs on a flat pad or tray when configured accordingly, making it ideal downstream of filling, capping, labeling, and rinsing stations. Type: Automatic shrink wrapper with welding bar Condition: NEW Output: Up to 25 bundles/minute (format-dependent) Infeed: In-line or 90° multi-row collation conveyor Film: PE shrink film, plain or printed with register mark alignment Packaging styles: Film-only bundles; optional flat pad or tray capability (configuration dependent) Welding bar: Available with multiple bar widths to match bundle size range Electrical: 50 Hz Dimensions (W x L x  ...

New Palletizer ROBOT-ARM PALLETIZER Automatic palletizing group specially designed for high speed applications with Fast Pack Formation Table at High Elevation – Speed suitable for 72.000 cans/hour line for 250 ml slim cans with 6×4 configuration, on 1200×1000 mm pallets – Package infeed height, H=2000 mm – Designed for pallet dimensions 1000x1200mm – Max. standard pallet height 1900mm – Pallet transfer height, H=500mm Machine is composed of: Fast Pack Formation Table at High Elevation – Mechanism to turn packs automatically at inlet of the palletizer according to the predetermined configuration of each layer. It is controlled by the PLC and. The device is equipped with a turner, which turns the product of 90°, if required. Intermediate Table – Consists of conveyor table, a product pushing device to pallet lifter. Driven by a geared motor. The translation of the layer fr ...

Technical Specifications & Performance Data The New automatic screw capping machine 8 heads for 12000 BPH is a high-speed rotary capper engineered for modern beverage production and industrial packaging environments. Designed for both PET and glass containers, it delivers precise, repeatable torque at high throughput for a wide range of products including water, juice, beer, wine, soft drinks, and edible oil. Production speed: up to 12,000 bottles/hour (12000 bph) Capping heads: 8 spring-loaded heads with quick-release design (M32x1.5 connection) Neck finish: 28 mm compatibility (e.g., common PCO/BPF variants) Cap types: aluminum screw caps (e.g., 30×60 ROPP), Guala pressure closures; additional formats on request Cap handling: on-the-fly pick-and-place with release head for stable, accurate cap transfer Cap feeder: Ø600 honeycomb feeder for continuous, oriented cap supply Turret geome ...

Technical Specifications & Performance Data This complete mixed new–used PET bottling line is engineered for high-speed carbonated soft drink production, delivering reliable performance at industrial scale while maintaining precise isobaric filling for carbonation retention and product integrity. Nominal speed: up to 25,000 bottles/hour (format- and product-dependent) Container type: PET (line configuration optimized for PET) Bottle formats: 0.06 L, 0.25 L, 0.50 L Neck finish: PCO 1881; compatible with lightweight CSD closures Filling technology: isobaric counter-pressure for carbonated beverages Product range: carbonated soft drinks; adaptable for flavored water and energy drinks Primary equipment brands: Sipa (SFR 16 blow molder), Sacmi (isobaric filler-capper), UBL SRL (labeling), Dimac (shrink wrapping), Robopac (palletizing/stretch), SIAD (process gases and compressors), plus conv ...

Technical Specifications & Performance Data The New Bottle Inspector Weight Checking Inspections Unit with Rejection Piston is an inline, high-throughput solution engineered for precise mass verification of individual packages without stopping product flow. Purpose-built for beverage production and industrial packaging environments, it delivers reliable, non-contact rejection for out-of-tolerance items, ensuring consistent quality and regulatory compliance. Application: Inline dynamic weight control with automatic reject piston Maximum speed: up to 11,000 bph (bottles/packs per hour) Inspection type: 2 (dual-threshold underweight/overweight logic) Containers: Brik cartons and cans (aluminum tins/cans) Conveying architecture: multi-conveyor configuration (4 conveyors) for stable weighing and controlled reject Operation: Simultaneous weighing without line stoppage; positive push-off reject ...

New Can Sealer 60 heads 30.000 cph Machine type: Can sealer. Year: 2018. Rotary heads: 60. Output: 30,000 cph on 330 ml cans. Electrical: 400V, 50Hz, Power: 16 kW. Available with : 70 HEADS Production per hour: 45.000 90 HEADS Production per hour cans: 60.000 1 – ADVANTAGE OF THE SYSTEM This rotary system applies a polyethylene stretch film directly on the can at line speed, supporting high-throughput can bottling machinery applications while protecting product contact areas. Protects hygiene of the can on the top rim and lateral body. Dry application without glue or heat. Permits drinking directly from the can after application. Improves product presentation and qualitative image. Maintains standard can stacking and palletizing. Watertight to allow immersion. Suitable for warm distributors up to 60°C. Compatible with traditional multipack systems. Enables decoration/customization for ...

New UHT tubular strilizer, homogenizer, CIP system for milk & cream - 10.000 LhTechnical Specifications & Performance DataThis tubular indirect UHT sterilizer is engineered for dairy processing with variable-speed operation and high thermal efficiency. It delivers dependable ultra-high-temperature treatment for milk and 40% fat cream with robust heat recovery and precise temperature control across each process stage.Capacity: Milk 10,000 L/h; Cream 40% fat 5,000 L/hHeat exchanger: Tubular, corrugated AISI 316 stainless steel tubesProduct inlet temperature: 8°CHomogenizing temperature: about 65–75°C (intermediate outlet available)Holding temperature: 90–95°CSterilization temperature: 135–142°C for 4 sOutlet temperature: about 20–25°CHeat regeneration: about 70% on tubular exchangerThermal profile: Heating 5→115°C (pressurized hot water at 132°C), Sterilization 115→142° ...

Bucket fillers for yoghurt are specialized machines used in the dairy industry to fill containers or buckets with yoghurt product efficiently and accurately. Here are some key points about them:, - Types: There are various types of bucket fillers, including gravity fillers, volumetric fillers, and piston fillers. The choice depends on the viscosity and type of yoghurt., - Automation: Many bucket fillers are semi-automated or fully automated, which helps in improving the speed and accuracy of the filling process., - Hygienic Design: Since they deal with food products, these machines are designed to comply with health and safety regulations, ensuring easy cleaning and maintenance., - Adjustability: Some bucket fillers allow for adjustable filling volumes, making it easier to fill different sizes of buckets with varying quantities of yoghurt., New Tub Fillers By for 1 kg up to 10kg buckets  ...

NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts an ...

New Batch Pasteurisers custom made on request., Dairy Machinery UK offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Ceam Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume Capabilities (Litres): 200 , Control Panel: Stainless steel Control box,  ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 100 , Control panel: Stainless steel Control box, Controls, Thermomet ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 300, Control panel: Stainless steel Control box, Controls, Thermomete ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 400, Control panel: Stainless steel Control box, Controls, Thermomete ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 500, Control panel: Stainless steel Control box, Controls, Thermomete ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 700, Control panel: Stainless steel Control box, Controls, Thermomete ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 800, Control panel: Stainless steel Control box, Controls, Thermomete ...

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 900, Control panel: Stainless steel Control box, Controls, Thermomete ...

New Batch Pasteurisers custom made on request., Dairy Machinery UK offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume Capabilities (Litres): 1000, Control Panel: Stainless steel Control box, ...

Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with a new set of blades -Manufacturer: Getecha, Side-mounted mill cutting mill -Type: GRS182-A1.50 -Drive motor: 5.5 kW -Inlet cross-section: 310 x 290 mm -Sieve perforation: Ø 6 mm -Dimensions: 720/700/H1220 mm -Weight: 210 kg

General SKU320Y666 LocationBarneveld MakeStephan TypeUMC-12-F Main Features MaterialStainless steel Volume12 Ltr. Motor1.8 KW Specified Features - Cutter Cuttercheck Capacity12 l. Diameter320 mm Depth200 mm Knife diameter220 mm Number of knife blades2 With scrapermanual Inlet0,90 mm With jacketcheck Motor1,8 kW (380 V 150-2800 rpm) With variable speed drivecheck Speed150—2800 rpm MaterialStainless steel 1.4571 (316Ti) With jacketcheck General No.5148372 Year of construction1993 Mounted on framecabinet Mounted on wheelscheck With switchgearcheck Floorspace0,90 x 0,60 m Total height1,10 m Extra SpecificationsWith a vacuum pump, 0.12 kW, 2850 rpm,&:nbsp:pressure gauge,&:nbsp:including an extra bowl,&:nbsp:including an extra knife,&:nbsp:knife blade material: EN 1.4510New arrivalsCuttersStephanNew arrivalsMills > CuttersBrand > Stephan What you can expect f ...

General SKU328Y700 MakeExtrella TypeST-EM No.91017 Year of construction1991 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume4210 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity4210 l. Vessel sizesø 1600 x 2200 mm Dished topcheck Dished bottomcheck ManholeDN600 Top connectionscheck OutletDN80 Max. temperature—10 / 200 °C MaterialGlass - Enamel (TPE-2000) General LocationBarneveld Floorspace1,60x1,60 m Total height3,20 m Weight2100 kgNew arrivalsPressure vesselsEstrellaNew arrivalsTanks > Pressure vesselsBrand > Estrella What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. P ...

General SKU328Y701 MakeEstrella TypeST-EM No.91016 Year of construction1991 Mounted on legscheck Pressure Working pressure6 Bar Number of vertical pressure tanks1 Main Features MaterialGlass Volume4210 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity4210 l. Vessel sizesø 1600 x 2200 mm Dished topcheck Dished bottomcheck ManholeDN600 Top connectionscheck OutletDN80 Max. temperature—10 / 200 °C MaterialGlass - Enamel (TPE-2000) General LocationBarneveld Floorspace1,60x1,60 m Total height3,20 m Weight2100 kgNew arrivalsPressure vesselsEstrellaNew arrivalsTanks > Pressure vesselsBrand > Estrella What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barn ...

Neue Farbwalzen / New Ink Form Roller Böttcher for KBA RA 105 Neue Farbwalzen / New Ink Form Roller Hersteller / Manufacturer Böttcher Böttcher KBA RA 105 Roller 0905480 B 1902 Böttcher KBA RA 105 Roller 0905495 B 1903 Böttcher KBA RA 105 Roller 0905473 B 1703 Böttcher KBA RA 105 Roller 0905472 B 1702 Böttcher KBA RA 105 Roller 0905476 B 1511 Böttcher KBA RA 105 Roller 0905476 B 1601 Böttcher KBA RA 105 Roller 0905476 B 1606 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905470 B 1702 Böttcher KBA RA 105 Roller 0905474 B 1604 Böttcher KBA RA 105 Roller 0905470 B 1605 Böttcher KBA RA 105 Roller 0905471 B 1605 Böttcher KBA RA 105 Roller 0905475 A 1602 Böttcher KBA RA 105 Roller 0905473 B 1606 Böttcher KBA RA 105 Roller 0905495 B 1605 Böttcher KBA RA 105 Roller 0905480 B 1605 Böttcher KBA RA 105 Roller 0905472 B 1605 Böttcher KB ...

Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze für Heidelberg SM XL 105 New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller for Heidelberg SM XL 105 0902004 A 1812 (x5) - Neue Farbübertragswalze / New Ink Transfer Roller - Sach Nr. F2.009.120F/07 - Kennz. ROT 0902014 A 1405 (x2) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1404 (x1) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1411 (x1) - Feuchtauftragswalze - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902012 A 1405 (x1) - Feuchtdosierwalze Pro Aqualis - Sach Nr. F2.030.510F/03 - Kennz. OHNE

Elektrohefter für Block- und Sattelheftung Electric Stapler Nagel Rinak for flat block - saddle stapling Elektrohefter  - Electric Stapler Nagel Rinak für Block- und Sattelheftung / for flat block - saddle stapling Neu unbenutzt / brand new Year 04/2021 - Serial-No. 3551000 Blockheftung: bis 4 mm ca. 40 Blatt (80 g-Papier) Broschüren: bis 3 mm ca. 30 Blatt (80 g-Papier) Heftklammern: 26/6, 26/8S, Ri 26/6 Anlagetisch lässt sich durch einfaches Kippen zur Block oder Sattelheftung umstellen Heftkopf-Schlagstärke einstellbar verstellbarer Seitenanschlag Auftischmaschine zur Befestigung an der Tischplatte Kapazität Klammermagazin: 210 Stück Einlegetiefe: 30 mm (bei Blockheftung) Anschluss: 230 V / 50 Hz Maße: B540 x T370 x H360 mm Gewicht (netto): 16 kg

NEW CONDITION ⦁ Double roller trolley, length 3200 mm ⦁ Incisor ⦁ Parallel fence 1300 mm ⦁ Large MSX protective cover. 400mm ⦁ Main motor 5.5 KW (7.5 HP) ⦁ 3 speeds 3/ 4/ 5,000 rpm ⦁ One-sided miter guide Two wooden crates: 187 x 131 x 105 cm, 904 kg gross weight 331 x 45 x 31 cm, 244 kg gross weight Auction-ID: A1-50215-6

SIDEROS ORION 2 table with scraper, year 2014 having dimensions 2600 x 12000 mm, new head and MESSER MULTITHERM4000 oxy-cuttings, year 2008, with PROFIMEC external filter COLLECTION BY SEPTEMBER 2026 Auction-ID: A7-50204-1

Technical characteristics: - Table dimensions: 1000X560 mm - Trolley dimensions: 3200x350 mm - Squaring carriage stroke with scoring machine: 3350 mm - Cutting width on rip fence: 1300 mm - Blade inclination: 0-45° - Max cutting height with diam. Blade: 350 mm - 118 mm - Max cutting height at 45° blade front: 350 mm - 81 mm - Max blade diameter / saw hole: 350/30 mm - Saw rotation speeds: 3000/4600 rpm - Suction nozzle diameter in the frame: 100 mm - Saw Motor Power: 4kW (5.5HP) 50Hz - Incisor motor power: 0.55kW (0.75hp) - Noise level according to en 27960 standards: 81.2-83.9 dB(A) - Maximum angle opening with stops: 3600 mm Standard equipment: - Sliding anodized aluminum alloy trolley on precision adjustable barn guides made of hardened and ground steel - Fixed protection on saw blade - Additional table with 90° quick-release angle guide and step-by-step tilt graduation at 10° ...

Exxite NeXt electric bicycle Brand: Exxite Model: NeXt Condition: New, in original box Urban electric bicycle 250 W electric motor Motor torque: 50 Nm Rear hub motor Battery: 36 V / 14 Ah / 504 Wh Range: up to 80 km, depending on operating conditions 27.5\" wheels Regenerative braking system Smart City electric bicycle design Colour: two-tone copper and black New and supplied in original box Auction-ID: A1-50266-78

Exxite NeXt electric bicycle Brand: Exxite Model: NeXt Condition: New, in original box Urban electric bicycle 250 W electric motor Motor torque: 50 Nm Rear hub motor Battery: 36 V / 14 Ah / 504 Wh Range: up to 80 km, depending on operating conditions 27.5\" wheels Regenerative braking system Smart City electric bicycle design Colour: two-tone copper and black New and supplied in original box Auction-ID: A1-50266-79

New and supplied in original box Exxite XS electric folding bicycle Brand: Exxite Model: XS Electric folding bicycle 6061 aluminium frame 250 W electric motor Motor torque: 35 Nm Rear hub motor Removable 36 V battery Battery options: 8 Ah / 10.5 Ah / 14 Ah Range: up to 80 km, depending on battery configuration and operating conditions 20\" x 2.125\" wheels Regenerative braking system EIVA 2.0 system with Bluetooth connectivity Integrated lights Folding time: less than 30 seconds Folded dimensions: 82 x 68 x 42 cm Weight: 19 kg + battery Available colours: green, brown and black Please note: the colour cannot be selected. Units will be supplied in one of the available colours depending on stock availability Condition and completeness as shown in the photographs Auction-ID: A1-50266-14

Exxite XXS electric folding bicycle Brand: Exxite Model: XXS Condition: New, in original box Electric folding bicycle 6061 aluminium frame 250 W electric motor Motor torque: 35 Nm Rear hub motor Removable 36 V battery Battery options: 8 Ah / 10.5 Ah Range: up to 50 km, depending on battery configuration and operating conditions 16\" wheels Regenerative braking system Compact folding design Available colours: green, brown and black Please note: the colour cannot be selected. Units will be supplied in one of the available colours depending on stock availability New and supplied in original box Auction-ID: A1-50266-45

Exxite NeXt electric bicycle Brand: Exxite Model: NeXt Condition: New, in original box Urban electric bicycle 250 W electric motor Motor torque: 50 Nm Rear hub motor Battery: 36 V / 14 Ah / 504 Wh Range: up to 80 km, depending on operating conditions 27.5\" wheels Regenerative braking system Smart City electric bicycle design Colour: two-tone copper and black New and supplied in original box Auction-ID: A1-50266-82

Exxite X One electric bicycle Brand: Exxite Model: X One Condition: New, in original box Urban electric bicycle 250 W electric motor Motor torque: 50 Nm Rear hub motor Battery: 42 V / 10.5 Ah Range: approximately 60 - 80 km, depending on operating conditions 27.5\" wheels Regenerative braking system Urban design with integrated components Available colours: black, grey/graphite and white Please note: the colour cannot be selected. Units will be supplied in one of the available colours depending on stock availability New and supplied in original box Auction-ID: A1-50266-65

Exxite NeXt electric bicycle Brand: Exxite Model: NeXt Condition: New, in original box Urban electric bicycle 250 W electric motor Motor torque: 50 Nm Rear hub motor Battery: 36 V / 14 Ah / 504 Wh Range: up to 80 km, depending on operating conditions 27.5\" wheels Regenerative braking system Smart City electric bicycle design Colour: two-tone copper and black New and supplied in original box Auction-ID: A1-50266-83

New and supplied in original box Exxite XS electric folding bicycle Brand: Exxite Model: XS Electric folding bicycle 6061 aluminium frame 250 W electric motor Motor torque: 35 Nm Rear hub motor Removable 36 V battery Battery options: 8 Ah / 10.5 Ah / 14 Ah Range: up to 80 km, depending on battery configuration and operating conditions 20\" x 2.125\" wheels Regenerative braking system EIVA 2.0 system with Bluetooth connectivity Integrated lights Folding time: less than 30 seconds Folded dimensions: 82 x 68 x 42 cm Weight: 19 kg + battery Available colours: green, brown and black Please note: the colour cannot be selected. Units will be supplied in one of the available colours depending on stock availability Condition and completeness as shown in the photographs Auction-ID: A1-50266-10