needle used for sale

pressure: 80 t stroke: 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller and cage assembly, cylindrical roller and cage assembly, cylindrical roller bearings -Manufacturer: INA, needle bearing with inner ring unused OVP -Type: RNA/NA 4824 -Outer diameter: 150 mm -Inner diameter: 120 mm -Number: 6 needle bearings available -Price: per piece -Bearing dimensions: Ø 150 x 30 mm -Weight: 1.2 kg/piece

A 3-needle hem sewing machine with trimming device (high-speed cylinder bed coverstitch machine with integrated thread trimmer and trimming device) Juki is available. Stitch type: triple coverstitch, needle gauge: 5.6mm, sewing speed: 6000 stitches/min, table top dimensions X/Y: 1060mm/600mm, needle: UY128GAS 9S-14S, stitch length range: 0.9mm/4.5mm, control: SC921B, control panel: CP18B. Documentation available. On-site inspection is possible.

Manufacturer: FEHRER Model: NL9/S – 4.4m Year of Manufacture: 1989 WORKING WIDTH : 4400mm Both machines are complete inclusive electro boxes and grates 1st. the needling machine is for 4 pcs of needle plates and 3 600 needles; two feeding slat belts at the input, a cylinder at the output 2nd. the needling machine is for 4 pcs of needle plates and 5 600 needles; there are feed rollers at the input and output The number of needles depends on the type of needle plates used. Status : stopped Find more here - / Contact us at -

Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible.

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 320 mm -Outer: Ø 359 mm -Width: 175 mm -Weight: 19 kg

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 500 mm -Outer: Ø 549 mm -Width: 175 mm -Weight: 29 kg

For sale: Plotters, inkjet printers, in need of repair Manufacturer: HP Type: Designjet 500 Print size: A1 Areas of use: CAD plans, posters, architect plans, pictures, etc. Condition: in need of repair, Error code: 21:11 Fixed price: 250 Euro Extras: 15x paper rolls A1 /HP/Rauch. Price 150 euros extra!

Including: N°1 Needle scale with a capacity: 200 kg N° 2 bench needle scales with a capacity: 5kg and 3kg. Mixed manufacturers: BERCKEL/OMEGA Serial: 1539804 Estimated weight: 200 kg Approximate dimensions: 1200x800xh1600 mm Auction-ID: A7-44996-104

6cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested

Needle Valve PARKER 4V1-DPQ4K-SSVP-PP 17SD | 1AXC panel mounting panel drilling Ø: 19 mm Dimensions: 125 x 110 x 65 mm

Hello sell needleflies about 5000 m2 New Width of each roll 2.00 meters Original price was between 22.00 and 44.00 euros

diameter: 32 - 50mm der Buchsen length: 350 mm groove width: 10 - 12 - 14 mm weight: 20 kg dimensions: 400 x 150 x 250 mm Groove widths: 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 8 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach W72 WGW 12P9 Ø 38-40 Length= 335mm 10 pieces as new + sealed 1 piece like new + unsealed Price valid for 1 piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 12 - 30mm der Buchsen groove width: 4 - 5 - 6 - 8 mm weight: 14 kg dimensions: 400 x 150 x 250 mm length: mm Groove widths: 4 - 5 - 6 - 8mm Diameter of the guide bushes: 12 - 14 - 15 - 16 - 18 - 20 - 22 - 44 - 25 - 26 - 28 - 30mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece diameter: mm grinding length: mm clamping length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 150 Kg; minimum weight: 2.5 Kg; division: 50 gr; Weighing table size: 750 x 870mm. Serial: 206285/37 Estimated weight: 140 kg Approximate dimensions: 1200x800xh200 mm Auction-ID: A7-44996-106

Capacity: 150 Kg; minimum weight: 1 Kg; Weighing table dimensions: 610 x 610 mm. Serial: 99142 Estimated weight: 140 kg Approximate dimensions: 1200x800xh200 mm Auction-ID: A7-44996-103

A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024.

The UCC 548 is a productive and flexible high-speed model. This machine is characterized by its ability to produce a wide variety of fabric weights and designs – perfect for smaller, ever-changing markets. Thanks to its outstanding efficiency and quality, the Terrot UCC 548 has gained international recognition and is established on the market worldwide. Features: - Made in Germany: Maximum efficiency and precision for reliable production. - Flexible application options: With 1.6 feed points per inch and a speed factor of 800, production is extremely efficient and adaptable. - High-quality inserts: Integrated guides enable safe processing even with long thread runs. - Versatile technology: The machine is available with a choice of 2-way or 3-way technology in the cylinder control rail, allowing for a wide range of applications. - Great design flexibility: Two needle marks i ...

Pos. 9749.13 - 1 MAYER type Relanit 3.2 II, gauge 28, diameter 30, jersey open knit, 2640 needles, 96 feeders, lycra, 3+1 tracks Pos. 9750.11 - 1 MAYER type Relanit 4, gauge 28, diameter 30, jersey tubular knit, 2640 needles, 96 feeders, 3+1 tracks Pos. 9751.18 - 1 MAYER type Relanit 4, gauge 24 installed and spare cylinder gauge 28, diameter 30, jersey tubular knit, 2268 needles, 96 feeders, 3+1 tracks Pos. 9752.1 - 1 MAYER type MV4 II, gauge 20 installed and spare cylinders gauge 24 and 28, diameter 30, jersey tubular knit, 1872 needles, 96 feeders, 4 tracks Pos. 9753.8 - 1 MAYER type FLF, gauge 14, diameter 30, rib tubular knit, 2 x 1320 needles, 44 feeders, lycra, 1/1 tracks Pos. 9754.5 - 1 MAYER type MLBF, gauge 22, diameter 30, plush tubular knit, 2068 needles, 96 feeders, 4 tracks Pos. 9755.17 - 1 SANTONI type Zenit SV, gauge 28, diameter 34, jersey open knit, 29 ...

7 HARRY LUCAS circular knitting machines for the production of endless single jersey tubular fabric, type RR3-1sPL, with fixed cylinder and rotating cambox with following specifications: 1 machine diameter 1 3/4", gauge 10, 56 needles, 1 system 1 machine diameter 2 5/8", gauge 10, 80 needles, 1 system 1 machine diameter 3", gauge 10, 92 needles, 1 system 1 machine diameter 3 1/4", gauge 10, 102 needles, 1 system 1 machine diameter 3 1/2", gauge 10, 108 needles, 1 system 1 machine diameter 3 3/4", gauge 10, 118 needles, 1 system 1 machine diameter 4 1/2", gauge 10, 140 needles, 1 system

9 Colors Age : 2007 Complete rail system Unwinder 1 meter roll diameter Splice detector Web breaking detectors Teknek cleaning system Corona Antistatic system Ink Pumps ; 1 Knife cutting unit : 3 knifes 6 printheads with IST UV units 9 Sensotec control register system Rotary diecut ( K1B Gap Master) AVT inspection system Rewinder compatible between both presses, need to choose Cold Foil Unit ( Unwinder+Rewinder) compatible between both presses Cold Foil pressure cilinder : 2 Cold foil small cilinder : 2 Screen Printhead Gen I : 2 available for both presses, need to choose Screen Printhead Gen II : 2 available for both presses, need to choose Screen Printhead Gen III : 2 available for both presses, need to choose Mounting Device : 2 available for both presses, need to choose More ink chamber : 2 available for both presses, need to choose

10 colors Age : 2005 Complete rail system Unwinder 1 meter roll diameter Splice detector Web breaking detectors Teknek cleaning system Corona Antistatic system 6 printheads with IST UV units : 10 Ink pumps : 3 Sensotec control register system Rotary diecut ( K1B Gap Master) AVT inspection system Rewinder : compatible between both presses, need to choose Cold Foil Unit ( Unwinder+Rewinder) : compatible between both presses Cold Foil pressure cilinder : 3 Cold foil small cilinder : 3 Screen Printhead Gen I : 2 available for both presses, need to choose Screen Printhead Gen II : 2 available for both presses, need to choose Screen Printhead Gen III : 2 available for both presses, need to choose Mounting Device : 2 available for both presses, need to choose More ink chamber : 2 available for both presses, need to choose Mounting Device More ink chamber Tool List on re ...

The plant consists of two production units: Production Line B and Pre-Mix Unit 5 (MA5). PRODUCTION LINE B Production Line B is a complete nonwoven needlepunch line consisting of the following components listed in process order. 1. Suction / Filter Station (Filterstation) Function: Fiber dust extraction and air filtration for the production line. 2. Feed Shaft Manufacturer: Spinnbau Bremen Machine length: 3,970 mm Machine width: 2,600 mm Machine height: 6,233 mm 3. Belt Scale with Vibrating Shaft - Protec Vibrating Shaft: Length: 880 mm Width: 2,800 mm Height: 1,500 mm Weight approx.: 870 kg Belt Scale: Length: 550 mm Width: 3,000 mm Height: 700 mm Weight approx.: 550 kg Power supply: 3NAC 400V 50Hz 20A Description: The vibrating shaft produces a uniform fiber feed. The belt scale measures the weight of the fiber material being transported and regulates the feed spee ...

There are 5 sewing machines available: 1) Pfaff linking machine with elastic and 2-needle flatbed for fitted sheets, 2) Pfaff 1446 2-needle flatbed sewing machine for gathering, 3) Adler 204-4102 S beading machine, 4) Pfaff 1422 2-needle flatbed sewing machine for zippers and 5) Global LP 9226 LH-SNB 2-needle column sewing machine with double seam.

Various sewing machines are available. 1) Bartacking machine Dürkopp 570. 2) Bartacking machine Dürkopp 570. 3) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 4) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 5) Overlock/binding machine CSTA 2542-53, needle: 1, thread: 2. 6) Sewing machine Pfaff 463-6/27. 7) Sewing machine Dürkopp Adler 271-14004. 8) Sewing machine Pfaff 481/900/99, needle: 1. 9) Sewing machine Pfaff 1181 Racing Puller. 10) Sewing machine Dürkopp Adler 272. An on-site inspection is possible.

HOT MICROPERFORATOR, Maximum working width 1.200 mm, Total roll width 1.300 mm., Maximum working speed 80 mt./min, Inner Ø 118 mm., Fitted with n.12 x 100 mm.bronze needle holding pieces, Nr.9 needles/sqcm, needle Ø 1,42 mm. (or bespoke to project),, 380 V 3Ph+N+E 50 Hz., Electric panel with digital thermometer to pre-set the working temperature, You can select the temperature on the different heaters (central and side), Pneumatic system to open/close the perforating roll., Roll rotation when in stand-by posittion, to avoid material overheating, Easy replacimg counter-roll in organic bristle., Micro-metric adjustment of needles pressure in work, The needle-holding roll can be very easily replaced to a different needle pattern., conditions: new machine, type: Hot microperforator for plastic films

Square broaching tool, multi-wedge broaching needle, broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Width: Square 17 mm wrench size, see photos -Type: unfortunately no longer readable -Size: see photos -Quantity: 1 piece available -Total dimensions: Ø 19 x 955 mm -Weight: 1.3kg

Material: 1.4571/ stainless steel Content: 16 ltr Weight: 2000 kg Length x Width x Height: 2500 mm x 1300 mm x 2000 mm Filter area : 0,12 m² Fill : 16 ltr. Working pressure : 25 bar. Further information: Basic application area: - Suspensions with subtle and subtlest solid materials, which need for fast and optimal dehumidification a high adrift pressure difference.. - Dry sludge, those won coal is compressible and throught strong mechanical pressure arrives a drastic reduction of pore volume - Products, at those a widely dehumidification is possible after cake constitution through a displacement of pore fluid through gas - Suspensions, whose need for unproblematic abscission a degressive or a progressive supply of dehumidification potential. Very good condition. You can also get the entire system with all components you need. Write us below!

Make and Model: GE WHG-125 Year: 2011 Hours: 6000 approx. Year : 117 HZ : 50/60 Voltage: 400/480 V Scope of supply: Each ORC skid has its own heat exchangers for evaporation and condensing of the refrigerant (working fluid). You would need to install a water heat source and a water cooling circuit, no cooling towers or blowers are included with what we have in storage. Condition: These units have been decommissioned and been in storage since May 2016. Unit 1 and 2 had a report of an MBC fault (magnetic bearing controller). Unit 3 has several parts missing due to a failure in the power electronics. Some parts of the Power electronics, PLC, speed drive for the refrigerant pump are missing. Unit 4 had a failed heat exchanger and filled the ORC with water, would need stripping to determine the full extent of the repairs needed. Extra: These units run on a working fluid (refri ...

bizhub C227 = Equipment number: 1823718979 – Color MFP Incl. DF-628 Original Feeder, DK-514x Base Cabinet bizhub C227 Communication center with 22 ppm in b/w and color, standard Emperon pressure controller with PCL6 (XL 3.0), PCL5c, PostScript 3, PDF 1.4, XPS and OOXML support, paper capacities of 2 x 500 Sheet and 100 sheets from stacking sheet feeder, formats from A6 to A3, grammages from 60–256 g/m2, 2 GB Storage, 320 GB hard drive and 1 GB Ethernet as standard OC-514 Original Cover Cover instead of an Original Feeder DF-628 Original Feeder Automatic document feeder for up to 100 originals, with duplex function PC-114 Universal Cartridge A5-A3, 1 x 500 sheets, 60-256 g/m2 PC-214 Universal Cartridge A5-A3, 2 x 500 sheets, 60-256 g/m2 PC-414 Large Capacity Cartridge A4, 2,500 sheets, 60-256 g/m2 DK-514 Base cabinet Storage space for paper supplies and cons ...

Mathis THN 10988 Laboratory Thermosal Plant Use This foulard-dryer combination has proven itself excellently in practice. It is used in this way for a wide variety of hot air treatment processes such as drying, fixing, condensing, thermo-isolating, etc This system is used wherever a certain sample size is already required, for example to produce sample collections or the like. Dryer THA If the foulard and dryer are to be used separately in addition to continuous operation, the THA type dryer should be chosen. Attached to this device are a unwinding unit at the dryer entrance and a pull-out unit at its exit. This element determines the speed of goods in individual operations. This offers the advantage of using the foulard and dryer independently and at the same time. For drying, fixing, condensing, etc., the goods are then put on the dryer. If all the previously listed ap ...

• Fully automatic inspection machine for prefilled syringes with water-based, clear solutions, not suitable for protein solutions • Maximum output 12,000 ampoules/hour • For prefilled syringes diam. 6.85-14.45 mm, height incl. flange and needle guard max. 120 mm, flange diam. max. 24 mm, depending on format set • Automatic syringe feed from upstream machine via screw conveyor • Syringe turning station for foreign objects and liquid residues in the needle • Rotary device for foreign object detection • 3 CCD cameras for - Reflective foreign object detection station (foreign objects such as glass, white spots, etc.) - Non-reflective foreign object detection (colour dots, colour blocks, metal chips, etc.) - Reflective or non-reflective foreign objects and aluminium hydroxide detection station • 1 inspection station for flange damage and missing pistons • 1 inspection stat ...

weight max. in kg: 1250 kg fork length: 950 mm stroke height: 1500 mm weight: 595 kg dimensions of the machine ca.: m Condition: need to repair: Electric pedestrian forklift with travel drive in need of repair. He worked well until the end, until all functions stopped. The electricians diagnosis was a defective circuit board in the charging control. Since we almost never use a forklift anyway, we sell it as in need of repair or as a spare parts carrier. Charger available. No statement can be made about the condition of the armored plate battery because the truck no longer works. Tires brittle, one wheel broken. This is a defective used device, so we are selling it with exclusion of any warranty. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

🏗️ More height? More possibilities †with MANTO 3.30 m!   Need formwork for extra-tall wall heights ? Then the  Hünnebeck MANTO at 3.30 m height is exactly what you need! 💪 The MANTO 3.30 m is part of Hünnebeck’s well-established wall formwork system †robust, efficient, and highly flexible. Thanks to its hot-dip galvanized steel frames , it’s made to withstand the toughest site conditions †durable and reliable all the way. 💡   🚧 Perfect for crane-assisted projects: With this height, you can form large surfaces even faster and more cost-effectively . Whether used horizontally or vertically , the panels can be combined freely †giving you maximum flexibility on site. 🔁   And as always: 📦 Accessories? Of course! Our warehouse is stocked with a wide range of matchi ...

Available immediately from operational European factory. Equipment professionally maintained and in excellent technical condition. FLAT KNITTING MACHINES - Steiger Antares 3.130SC Freegauge, E14 (E7/E14), Switzerland Quantity: 1 unit Year: 2019 - Steiger Antares 3.130 SC, E14, Switzerland Quantity: 5 units Year: 2019 - Steiger Antares 3.130 SC Fully Fashion, E16, Switzerland Quantity: 1 unit Year: 2019 - Stoll ADF 530-32 Multi Gauge Quantity: 1 unit Year: 2018 SOFTWARE Programming Software Model+ by Steiger, Switzerland Quantity: 1 unit Year: 2019 LINKING MACHINES - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2019 - Exacta Ultravision Stoptronic Italy E16 Quantity: 4 units Year: 2018 - Exacta Ultravision Stoptronic Italy E22 Quantity: 4 units Year: 2019 SEWING MACHINES - Exacta Cupseamer Quantity: 1 unit Year: 2019 - Durkopp Adler 281-140342-03, Single Needle  ...

A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine.

Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKC -Width: Square 22 mm -Quantity: 3 pieces available -Price per piece -Total dimensions: Ø 22 x 925 mm -Weight: 2.1 kg/piece

Broaching tool, broaching needle, special tool, grooving tool, keyway machine, keyway machine, keyway tool, keyway broaching needle -Manufacturer: SWZ, broaching needle -Type: SW 22 F8x28,35 RL 20-50 mm -Article No.: 24 3039 174 208 020 TKO -Width: square 22 mm / see photos -Quantity: 2 pieces available -Price per piece -Dimensions total: 920/22/22 mm -Weight: 2.5 kg/piece

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller cage, cylindrical roller cage -Manufacturer: INA, Axial cylindrical roller bearings, axial needle roller bearings, 5 pcs., unused, original packaging -Type: AXK 150190 A -Outer diameter: 190 mm -Inner diameter: 150 mm -Dimensions: Ø 190 x 5 mm -Price per pack of 5 pieces: 200 euros -Stock: 4 package units and 2 individual items -Weight: 0.2 kg/piece

Used overhauled capping machine BERTOLASO DELTA up to 6000 bph The BERTOLASO DELTA 504 R used capping machine delivers high precision for bottling applications. Specifically, Bertolaso designed this capping machine to operate at speeds of up to 6000 bottles per hour (BPH) with 4 capping heads. Furthermore, the machine accommodates straight corks, making it a strong choice for industries that need a reliable, airtight closure. Technical features and construction of the Capping Machine BERTOLASO DELTA The BERTOLASO DELTA 504 R features stainless steel construction, which ensures corrosion resistance and durability over long operational periods. Additionally, with a weight of 1390 kg, the machine provides robust support for continuous industrial use. Moreover, it includes a vacuum-ready feature for the cork, thereby enhancing the safety and reliability of the capping process. However, it do ...

Used Capping Machine BERTOLASO for Aluminium Screw Caps up to 9000 BPH The Bertolaso SIGMA 606 capping machine delivers reliable and high-performing results for aluminium cap applications. Specifically, this machine meets the needs of industrial bottling by ensuring efficiency and precision in the capping process. Moreover, its technical configuration makes it ideal for high-capacity production lines, reaching up to 9,000 bottles per hour. Main Technical Features of the Bertolaso SIGMA 606 The machine operates with six capping heads, which handle aluminium caps sized 28 x h 15 mm. As a result, this setup ensures that the machine applies uniform and secure closures, minimizing defects during production. The centrifugal cap feeder guarantees a continuous and steady flow of caps to the capping heads. Consequently, this system maintains consistent production speed, even under maximum load co ...

Used Tetra Pak complete bottling line up to 9000 bph General characteristics The used Tetra Pak bottling line, with a capacity of 9000 bottles per hour, has a configuration that responds to different production needs. Founded in 2004, this line has accumulated 18,220 hours of work, a testament to its durability and reliability. The backbone of the system is the TT3 180v XH OSO filling machine, capable of handling TETRA TOP formats, thus providing versatility without compromising operational efficiency. Packaging The TCBP70 cardboard packaging machines, both 110v with 8516 working hours and 100v with 12770 working hours, support different packaging configurations, in 2×4 and 3×6 formats respectively, adopting the Wrap Around technique for maximum protection during distribution. Additional components of the Used Tetra Pak line The inclusion of a granulate container (GS) and a con ...

Used palettizer MONDO & SCAGLIONE P0 up to 1000 box/hour The machine delivers a highly efficient and versatile solution for bottling lines. Therefore, it optimizes the palletizing process and perfectly suits lines with a production capacity of approximately 4,000 bottles per hour. Technical features of the MONDO & SCAGLIONE palettizer The palettizer, designed by the renowned company MONDO & SCAGLIONE, ensures high reliability and performance. Moreover, it uses a one-way carton inlet with a motorized roller conveyor, which simplifies and accelerates load management thanks to its integrated carton separator. Additionally, the machine moves loads precisely and quickly across three axes. Its iron structure provides durability and robustness, while the safety protections, in turn, safeguard operators during use. The palettizer MONDO & SCAGLIONE also simplifies operational control through its  ...

Other data and price on inquiry. Do you need another machine or the whole arrangement? We have more than 1000 other used machines on stock. Please send us an email with your need.

Brevetti ATM 15 duplex (2 x modules) automatic inspection machine for syringes, currently set for 10.85mm diameter syringes (long and short needle), output up to 133/minute per module (266 per minute total). Each module is fitted with 6 control stations for presence of bung, reflective particles, fill height and bung position, needle cover, non-reflective particles, plus turbidity meter. Each module has 3 reject channels plus pass. One module is ATM15 SX year 2008, the second is ATM15 DX year 2007. Both units operate from one control panel.

For sale: REINTJES Marine gearbox WAF 560 Reduction: 5,947:1 Built 1992 The gearbox is in very good condition, always stored in facility with climate control. Price is Ex Works - The Netherlands. In case you need we can arrange the transport with very interesting rates. if you need further assistance or information please e-mail us: info@amp-power.nl Pictures available on request

used vertical hydraulic internal clearing machine with 3 clearing points in very good condition Pulling power:8.000 KG Clearance length: 1000mm Bgno2qtoyx Clearing: 3 pieces (4 pieces) Distance between clearing points:100mm Mounting diameter of the drawing heads3 x x 85mm Workpiece diameter: max. 1x 460mm / 2x 198mm / 3x 98mm Cutting speed: hydraulically infinitely adjustable from 1m/min up to max. 7m/min Return speed: hydraulically infinitely adjustable from 5 to max. 25m/min Space requirement of the machine (b x t x h) approx.:1400 x 2000x 3600mm (without service & operator environment) Power supply / connection value: 380Volt 50 HZ / 6.5 KW Accessories / Optional equipment: -manual and automatic clearing operation - Drawbridge for 3 clearing points - Workpiece table for 4 clearing points (only usable with special pullheads) - automatic tool feeder - tension dis ...

Used shopping cart of the brand Wanzl type ELA 130 with original Wanzl wheels, child seat, foldable box storage and deposit system (Euro). Our used shopping carts are all checked for functionality, cleaned, exempted from advertising and refurbished. With us you will receive a product with an excellent price-performance ratio. Technical data: • Manufacturer: Wanzl • Type: ELA130 • Basket volume: 132 litres • Condition: used/good • Dimensions (H x W x D): 102.9 x 59.5 x 102.2 cm • Weight: 25 kg • Wheels: 12.5 cm • Child seat • rear box storage • Coin deposit system • Original Wanzl Wheels • Space requirement per car: 18.7 cm • Space requirement per 10 carriages: 272 cm • Space requirement per 50 carriage: 1020 cm • Capacity parking boxes 3-row, length 5 m: 66 On request, you will receive the shopping carts with handles in your desired colo ...