needle used for sale

diameter: 32 - 50mm der Buchsen length: 350 mm groove width: 10 - 12 - 14 mm weight: 20 kg dimensions: 400 x 150 x 250 mm Groove widths: 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

6cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 320 mm -Outer: Ø 359 mm -Width: 175 mm -Weight: 19 kg

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 500 mm -Outer: Ø 549 mm -Width: 175 mm -Weight: 29 kg

Needle Valve PARKER 4V1-DPQ4K-SSVP-PP 17SD | 1AXC panel mounting panel drilling Ø: 19 mm Dimensions: 125 x 110 x 65 mm

amount: 8 STK Broaching tool, broach, special tool, grooving tool, grooving machine, grooving machine, grooving jointing machine, grooving jointing tool, broach W72 WGW 12P9 Ø 38-40 Length= 335mm 10 pieces as new + sealed 1 piece like new + unsealed Price valid for 1 piece The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 12 - 30mm der Buchsen groove width: 4 - 5 - 6 - 8 mm weight: 14 kg dimensions: 400 x 150 x 250 mm length: mm Groove widths: 4 - 5 - 6 - 8mm Diameter of the guide bushes: 12 - 14 - 15 - 16 - 18 - 20 - 22 - 44 - 25 - 26 - 28 - 30mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello sell needleflies about 5000 m2 New Width of each roll 2.00 meters Original price was between 22.00 and 44.00 euros

Working width: 2500mm, needle beam stroke: 60mm, max. stroke frequency: 1200/min, drive motor power: 22kW, number of needle boards: 6, length: 1100mm, width: 3800mm, height: 2020mm, weight: 5.2t. Without electronics, spare parts: needle beam, gearbox, bearing housing, bearings, and others. An on-site inspection is possible.

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller and cage assembly, cylindrical roller and cage assembly, cylindrical roller bearings -Manufacturer: INA, needle bearing with inner ring unused OVP -Type: RNA/NA 4824 -Outer diameter: 150 mm -Inner diameter: 120 mm -Number: 6 needle bearings available -Price: per piece -Bearing dimensions: Ø 150 x 30 mm -Weight: 1.2 kg/piece

Manufacturer: Automatex Model: CBF Year of Manufacture: 2008 Technical Specifications: - Working width: 2.500 mm - RPM: 1200 - Needle Density: 2x 460 N/m - Needles: 5000 N/m - Stroke: 60 mm - Needle boards: 1 set (two boards) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: FEHRER Model: NL9/S Year of Manufacture: 1991 Specifications: - Stroke: 60mm / max. 1,200 RPM - Needles: 1x 3,000 N/m - Working width: max. 2,600 mm Including: - Control Panel - Control Cabinet Find more here - .ucymachines/ Contact us at - sales@ucymachines

3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment.

Manufacturer: Karl Mayer Model: DS42/40 Type of Machine: Sharpening Machine Width: 42 inch Yarn Feed: NC Included: Complete with memory and roller aggregate and all Riede Note: Without Gatter Find more here - .ucymachines/ Contact us at - sales@ucymachines

Wacker Neuson - Concrete Compactor - Internal Vibrator IREN 58/250/18 New and unused Material Number 5100040883 Electric high-frequency internal vibrator for reliable performance in concrete compaction. Protective hose length 18 m. Auction-ID: A1-49710-19

Groove widths: 10 - 12 - 14mm Diameter of the guide bushings: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm Diameter 32 - 50mm of bushings Length 350 mm Groove width 10 - 12 - 14 mm Weight 20 kg Dimensions L x W x H 400 x 150 x 250 mm Condition: never used / new (5) Auction-ID: A7-49782-607

Merbau hardwood bell needle profile-N, 215 x 5.6 x 4 cm thick rebate Auction-ID: A1-45099-2180