mold used for sale

CLAMPING FORCE: 70TON PLATEN SIZES: 476 X 476MM D.B.T.B: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 250MM MAX DAYLIGHT: 650MM EJECTOR STROKE: 70MM SCREW DIAMETER: 30MM INJECTION PRESSURE: 2470BAR STROKE VOLUME: 106CM3 SHOT WEIGHT (P/S): 89GR CONTROLS: SELOGICA MOTOR: 15KW HEATING CAPACITY: 8.6KW SCREW DRIVE: HYDRAULIC

Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of construction: 2007 Control: MC 4 Clamping unit: Clamping force: 650 t Opening distance: 1150 mm Tool installation height min.: 600 mm plate spacing : 1750 mm Tie bar distance (h x v): 1100 x 900 mm Panel dimensions (h x v): 1510 x 1370 mm Centering (nozzle ejector plate): 200 / 200 mm 1.Injection unit: Screw diameter : 80 mm Injection weight in hp. Max. : 1400 g Displacement: 1543 cc Injection pressure: 2205 bar 2. Injection unit: Screw diameter: 45 mm Injection weight in polystyrene: 278 g Displacement: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x Air valve 16-fold cascade 3 x core pull on BWAP 3 x core pull on FWAP 20 x hot runner control units Robot interface: Euromap 67 Metrics: Total weight: 34,500 kg Total size L x W x H: 7.8 x 2.5 x 2.5 m Operating hours: 45400 h  ...

Key data: 4000 , 75

warehouse no.: 503220 manufacturer: BATTENFELD type: TM 400-3400 UNILOG B6S year of construction: 2008 clamping force: 4000 kN distance between tie bars h x h: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm Iem7p9r min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar equipment included: Screentext Multi-Language CEE-socket 16A core pulling hydraulically 1x air valve 1x Anti vibration mounts interface EUROMAP 67 Schuko-socket 16A measures of machine lxbxh: 7.2m x 1.75m x 2.42m total weight: 16400KG

Manufacturer: BATTENFELD Type: HM 1300-9200H-7700H-BM Control: UNILOG B4 Clamping force: 13000 kN Year of construction: 2005 Technical data closing page: Drive type: fully hydraulic Closing type: Full hydraulics Type: four-spar Clamping force: 13000 kN Tie bar size h: 1600 mm Tie bar size v: 1250 mm Panel size h: 2220 mm Panel size v: 1880 mm Installation height min: 1000 mm Installation height max: 1800 mm plate spacing max.: 3850 mm Opening distance: 2850 mm Ejector stroke: 350 mm Ejector force: 165 kN Centering movable plate D: 315 mm Centering fixed plate D: 315 mm Technical data spray side: Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1630 bar Screw length: 22 l/d Plasticizing current: 144 g/s PS The technical data of the 2nd injection unit are as follows: Injection unit II 7700 Screw diameter 100 mm, Specific spray pressure 1960 ...

Stock No.: 503221 Manufacturer: BATTENFELD Type: TM 2700-3300 UNILOG B4 Year of construction: 2007 Clamping force: 2700 kN Holmass v x v: 630 x 630 mm Panel size h x v: 940 x 940 mm Installation height min.: 250 mm Installation height max.: 650 mm plate pitch max.: 1250 mm Opening distance: 600 mm Screw diameter: 75 mm Displacement: 1657 cc Spray pressure: 2087 bar Equipment: Screen text Dutch Core tension hydraulic 1x Air valve 1x Machine with water battery Machine without handling Machine without material hopper Machine without suction conveyor Levelling elements Interface EUROMAP 67 Machine dimensions LxWxH: 7.2m x 1.71m x 2.4m Total weight: 16000KG

Warehouse No.: 503240 manufacturer: ENGEL type: Victory 650-120 Tech EC200 A02 Year of Construction: 2008 Operation hours: 60000 h clamping force: 1200 kN Size of mould plates H x V: 740 x 680 mm Min. mould height: 300 mm Open Daylight: 800 mm Opening stroke: 500 mm Screw diameter: 45 mm SWEPT Volume: 318 cc Injection pressure: 1232 bar Equipment included: screen text english CEE-socket 16A Core Pulling Hydraulically 2x Air Valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface EUROMAP 67 Mould Heating 8x measures of machine LXWXH: 4.86m x 1.5m x 2.1m total weight: 7600KG

Stock No.: 503007 Manufacturer: BATTENFELD Type: HM 10000-9200 Control: UNILOG B4 Year of construction: 2003 Operating hours: 67092 h Technical data closing page Clamping force: 10000 kN Holmass v: 1120 mm Holmass h: 1400 mm Panel size h: 1960 mm Panel size v: 1690 mm Installation height min.: 550 mm Installation height max.: 1020 mm plate pitch: 2120 mm Opening distance: 1100 mm Ejector stroke: 300 mm Ejector force: 118 kN Centering movable plate D: 250 mm Centering fixed plate D: 315 mm Technical data spray side Screw diameter: 120 mm Displacement: 5655 cc Spray pressure: 1632 bar Screw length: 22 l/d Screw stroke: 500 mm Screw speed: 130 min Screw torque: 11370 N Plasticizing current: 144 g/s PS Injection flow to the outside: 1144 g/s hp Number of heating zones: 8 Nozzle travel: 700 mm Dimensions & Weight Machine dimensions LxWxH: 11.6m x 2.9m x ...

Key data: 3500 , 60

warehouse no.: 503071 manufacturer: DEMAG type: Concept 350-710-1450 controller: NC4 year of construction: 2003 operation hours: 62370 h clamping force: 3500 kN distance between tie-bars h x v: 710 x 630 mm size of mould plates h x v: 1040 x 950 mm min. mould height: 330 mm max. mould height: 830 mm max. open daylight: 1385 mm opening stroke: 675 mm screw diameter: 60 mm swept volume: 763 ccm injection pressure: 1905 bar equipment included: 16x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x air valve moveable WAP machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 interface EUROMAP 63 Schuko-socket 10A measures of machine l x w x h: 6.5m x 2m x 2.3m total weight: 15300KG

Stock No.: 503129 Manufacturer: ARBURG Type: Allrounder 370 C 800-350 Control: Selogica Year of construction: 2002 Operating hours: 65000 h Technical data closing page Clamping force: 800 kN Holmass v: 370 mm Holmass h: 370 mm Panel size h: 570 mm Panel size v: 570 mm Installation height min.: 250 mm Plate pitch max.: 750 mm Opening distance: 500 mm Ejector stroke: 175 mm Ejector force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 35 mm Displacement: 139 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 150 mm Screw speed: 57 min Screw torque: 560 N Number of heating zones: 4 Nozzle travel: 300 mm Dimensions & Weight Machine dimensions LxWxH: 4.24m x 2.45m x 2.1m Total weight: 3460KG Equipment On-screen text german Compact Flash Drive Core pull hydraulic 2x Air ...

Key data: 1600 , 55

warehouse no.: 503156 manufacturer: KRAUSS MAFFEI type: KM 160-1000 PX controller: MC6 year of construction: 2018 operation hours: 9585 h clamping force: 1600 kN distance between tie bars h:: 520 mm distance between tie bars v:: 470 mm size of mould plates h: 710 mm size of mould plates v: 660 mm min. mould height: 200 mm max. mould height: 500 mm opening stroke: 950 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs air valve 2x machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface for temperature control units interface USB wear-resistant injection unit mould heating 24x measures of machine lxbxh: 6.7m x 1.6m x 2.3m total weight: 10900KG ...

Inv. Num. : 6278 Type: ES 750/175 HL Producer: ENGEL Generated: 2001 Parameters: Clamping force: 155 t

Injection moulding machines Dr. Boy Boy 55 A Stock No.: 503233 Manufacturer: Dr. Boy Type: Boy 55 A Control: Procan Year of construction: 2003 Operating hours: 64000 h Technical data closing page Clamping force: 550 kN Holmass v: 360 mm Holmass h: 335 mm Panel size h: 530 mm Panel size v: 500 mm Installation height min.: 250 mm plate pitch max.: 500 mm Opening distance: 350 mm Ejector stroke: 80 mm Ejector force: 42 kN Technical data spray side Screw diameter: 32 mm Displacement: 76.5 cc Spray pressure: 1030 bar Screw length: 16 l/d Screw stroke: 95 mm Screw speed: 250 min Screw torque: 240 N Number of heating zones: 5 Nozzle travel: 180 mm Dimensions & Weight Machine dimensions LxWxH: 3.25m x 1.09m x 2.04m Total weight: 2250KG Equipment On-screen text german Core tension hydraulic 1x Levelling elements

warehouse no.: 502917 manufacturer: BATTENFELD type: BA 2700-1000+250V BK controller: UNILOG B4 year of construction: 2001 operation hours: 87827 h lamping force: 2700 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 1000 mm min. mould height: 250 mm max. mould height: 620 mm max. open daylight: 1270 mm opening stroke: 550 mm 1st horizontal injection unit: screw diameter: 55 mm swept volume: 522 ccm injection pressure: 1943 bar 2nd verticale injection unit: screw diameter:35mm swept volume: 134,7 cm³ injection pressure:1856 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 4x machine without material hopper Anti vibration mounts interface for hopper loader Schuko-socket 16A Injection moulding machine for two components 250er verticale injection unit screw diameter:35mm swept ...

FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine was built in Germany in 2000. The machine produces high-quality plastic products using the injection moulding method. The plastic is fed into plate-mounted injection moulds with a height of 200 to 670 mm, and then welded with a force of 300 tonnes to produce items with the right shape and properties. The FERROMATIK MILACRON E300-S injection moulding machine is equipped with, among others, a large screw with a diameter of 60 mm and an operator panel located on the body of the machine with a FERROMATIK MILACRON IQT 33 CNC controller installed, allowing full control of all process parameters and programming of operating modes. The total weight of the FERROMATIK MILACRON ELEKTRA 300 S injection moulding machine is 17460 kg. Technical parameters of the FERROMATIK MILACRON EUROPE ELEKTRA 300 injection moulding machine - c ...

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine, manufactured in 2003 in Germany, is used in the processing of thermoplastics by injection moulding. The robust steel construction is equipped with first-class components, characterised by high reliability and performance. The FERROMATIK MILACRON EE155 machine works with injection moulds with a height between 200 and 590 mm, which are mounted on 780 x 780 mm platens and closed with a force of up to 155 tonnes. The combination of the high closing force with a 45 mm diameter screw, rotating at 250 rpm, guarantees the best quality of the produced products. The total weight of the injection moulding machine is 7800 kg. Technical parameters of the FERROMATIK MILACRON ELEKTRA 155 injection moulding machine - clamping force: 155 t (1550 kN) - screw diameter: 45 mm - maximum screw speed: 250 rpm - screw stroke: 200 mm - mould ...

Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 520C 1600-350 with Multilift Control Selogica Year of manufacture: 2001 operating hours: 55400 h constantly maintained (until 2022 by Arburg) Special features/extras: -Multilift Robot Closing side: Clamping force: 1600 kN/ 160 tons tie bar size hxv 520 x 520 mm platen size hxv: 728 x 728 mm Installation height min: 250 mm platen distance max: 900 mm opening stroke: 650 mm ejector stroke: 225 mm ejector force: 66 kN Injection side screw diameter 45 mm Stroke volume 230 ccm injection weight: 210 gr./hp injection pressure: 1670 bar dimensions: 5750 x 1950 x 2350 mm (L x W x H) Weight: 6.500 kg. - from week 48 2022 immediately available in our warehouse Hannover/Germany - Function tested (guaranteed function until first start-up)

very well maintained and constantly serviced injection moulding machine Manufacturer: Engel Type: VC 500/120 spex Control CC200 year of construction: 2010 Operating hours: 42500 h constantly maintained Special features/extras: 1 x core pull (on BAP) Hot runner: 4 circuits Clamping side: Clamping force: 1200 kN/ 120 tons Tie bar dimensions H X V tie bar-less Platen size hxv: 740 x 680 mm Installation height min: 200 mm Distance between platens max.: 700 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Injection side Screw diameter 40 mm Shot volume 251 ccm Injection weight: 230 gr./hp Injection pressure: 1297 bar (2023 bar increased) H2khaheng Dimensions: 4.82 x 1.48 x 2.01 (L x W x H) Weight: 6,800 kg. - immediately available now in our warehouse in Hanover free on truck or free to your door against freight reimburs ...

For sale: Krauss Maffei KM 2300/12000 MX ( NC5) Screw 135mm Year 2010

warehouse no.: 503252 manufacturer: KRAUSS MAFFEI type: KM 50-180 CX controller: MC5 year of construction: 2006 Machine is from a cleanroom production. clamping force: 500 kN distance between tie bars h x v: 370 x 370 mm size of mould plates h x v: 600 x 600 mm min. mould height: 200 mm max. open daylight: 400 mm opening stroke: 600 mm screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2025 bar equipment included: screen text german core pulling hydraulically 1x cascade control pneumatically 1 x air valve 2x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface for temperature control units measures of machine lxbxh: 3.5m x 1.4m x 2m total weight: 3000KG

ENGEL electric 180 ton (30mm screw, 300mm/sec injection speed) year `2013

For sale: Krauss Maffei KM 2300/12000 MX ( NC5) Screw 135mm year 2011

PONAR ŻYWIEC UT-090 H injection moulding machine was manufactured in 2001 in Poland. The machine, designed for plastic injection moulding, is equipped with high-end components, increasing productivity and ensuring high reliability. Located on the body of the injection moulding machine, an operator’s panel with an installed MOOG-BUHL CNC controller allows for complete automation of the injection process and control of parameters. Moulds with a minimum height of 225 mm, mounted on 615 x 615 mm platens, are closed with a force of 90 tonnes by a hydraulic clamping unit protected by fixed and movable guards. The combination of the high clamping force of the mould, together with a powerful screw with a diameter of 30 mm, guarantees the best quality of the manufactured products. The extensive equipment offered with the UT 090 H injection moulding machine includes a pneumatic plastic feede ...

warehouse no.: 503174 manufacturer: DEMAG type: ERGOtech 1000-420-310 controller: NC 4 year of construction: 2002 clamping force: 1000 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 600 x 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 168 ccm injection pressure: 2020 bar equipment included screen text german CEE-socket 16A complact flash drive core pulling hydraulically 1x air valve 1x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Schuko-socket 10A measures of machine l x w x h: 4.2m x 1.4m x 1.8m total weight: 3700KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W7 ...

Key data: 2000 , 55

warehouse no.: 503272 manufacturer: ENGEL type: VICTORY 1050-200 Power controller: EC100 A03 year of construction: 2004 clamping force: 2000 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm swept volume: 511 ccm injection pressure: 1622 bar measures of machine lxbxh: 6.6m x 1.8m x 2.3m total weight: 12900KG equipment included screen text slovenian core pulling hydraulically 1x core pulling pneum. 1x air valve 1x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface for ejector plates safety interface for dosing unit

PLATEN SIZES: 2200 X 2100MM MIN MOULD HEIGHT: 650MM MOULD OPENING STROKE: 1600MM MAX DAYLIGHT: 3000MM EJECTOR STROKE: 400MM SCREW DIAMETER: 120MM INJECTION PRESSURE: 1500BAR STROKE VOLUME: 6107CM3 CONTROLS: SEF 2000 TOUCH SCREEN MOTOR: 90KW HEATING CAPACITY: 60.9KW SCREW DRIVE: HYDRAULIC CORE PULLING: 2 AIR VALVE: 2

CLAMPING FORCE: 2000TON PLATEN SIZES: 2500 X 2500MM D.B.T.B: 1800 X 1800MM MIN MOULD HEIGHT: 1020MM MOULD OPENING STROKE: 1700MM MAX DAYLIGHT: 3320MM EJECTOR STROKE: 250MM SCREW DIAMETER: 115MM INJECTION PRESSURE: 1840BAR STROKE VOLUME: 5500CM3 SHOT WEIGHT (P/S): 4960GR CONTROLS: MC4 SCREW DRIVE: HYDRAULIC CORE PULLING: 4 AIR VALVES: 2

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Manufacturer: Arburg Type: 270 C 300 - 100 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 300 kN Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 59 gram PS Injection pressure: 1550 bar General Engine: 7,5 kW Heating: 4.7 kW Dimensions: 3.4 m x 1.4 m x 1.6 m Weight: 2000 kg Screen text: German

Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German

Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1

Manufacturer: Arburg Type: 570 C 2200 - 1300 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 2200 kN Tie bar spacing: 570 mm x 570 mm Plate size: 795 mm x 795 mm Tool height: min. 300 mm Opening distance: 650 mm Max distance between plates: 950 mm Screw: 60 mm Stroke volume: 664 ccm / 607 gram PS Injection pressure: 1450 bar General Motor: 55 kW Heating: 23 kW Dimensions: 6 m x 1,7 m x 2,1 m Weight: 8000 kg Screen text: German Additional equipment: Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface

warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 Selogica year of construction: 2003 operation hours: 48000 h clamping force: 1500 kN distance between tie bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x

warehouse no.: 503294 manufacturer: ARBURG type: Allrounder 470 C 1500-350 Selogica year of construction: 2003 operation hours: 47000 h clamping force: 1500 kN distance between tie bars hxv: 470x470 mm size of mould plates hxv: 650x650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar equipment included: screen text german machine without material hopper Anti vibration mounts measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG

warehouse no.: 503293 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 53000 h clamping force: 1500 kN distance between tie bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar equipment included: screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG

ENGEL ES 330/80 HL injection moulding machine was built in Austria in 1995. A highly reliable and efficient machine equipped with high-end components, is used in the processing of plastics by injection moulding. The combination of high mould clamping force and a powerful screw with a diameter of 35 mm guarantees the high quality of the manufactured products. The injection moulding machine works with injection moulds with a height from 170 to 370 mm, which placed on 710 x 660 mm platens are closed with a force of 80 tonnes. The machine is equipped with an ENGEL CC100 CNC controller for setting injection moulding process parameters, an ENGEL ERC 23/1-CH servo-driven multi-axis robot and a pneumatic and hydraulic core. The tie-bar-less injection moulding machine weighs 5300 kg. Technical specifications for the ENGEL ES 330/80 HL injection moulding machine - maximum clamping force: 80 ...

CLAMPING FORCE: 200TON PLATEN SIZES: 810 X 810MM D.B.T.B: 570 X 570MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 510MM MAX DAYLIGHT: 1220MM EJECTOR STROKE: 150MM SCREW DIAMETER: 45MM INJECTION PRESSURE: 2300BAR STROKE VOLUME: 382CM3 SHOT WEIGHT (P/S): 348GR CONTROLS: MOSAIC MOTOR: 32KW HEATING CAPACITY: 16.6KW SCREW DRIVE: ELECTRIC CORE PULLING: 2 AIR VALVES: 2 ROBOT INTERFACE: EUROMAP 67

Piston spindle injector, brand: Main Group, model: Mode10 Booster 4, 4 seats. Two injectors, press measurements: 580 X 470, 120 Tn closure, year: 2001.

Year of construction: 2013 Screw diameter: 60 mm Spec. Spray pressure: 1610 bar Injection volume: 848 cc Injection weight in hp: 800 g Clamping unit: Clamping force: 260 t Size of the clamping plates: 835 x 835 mm Lights tie bar distance: 575 x 575 mm Installation height: 195 mm Opening distance: 405 mm plate spacing: 600 mm Ejector travel: 180 mm Hydr. Drive power: 21 kW Cylinder heating capacity: 16.2 kW General information: Delivery time: Short term Dimensions(m) LxWxH: 6.3 x 1.8 x 2.0 m Weight: 8500 kg

Year of construction: 1997 Control type: MC3F Injection unit: ..,/135 Screw diameter: 30 mm Spec. Spray pressure: 2025 bar Injection volume: 74 cc Injection weight in hp: 68 g Clamping unit: 80/... Clamping force: 80 t Size of the clamping plates: 610 x 610 mm Lights tie bar distance: 405 x 405 mm Installation height: 250 mm Opening distance: 500 mm plate spacing: 750 mm Ejector travel: 150 mm Hydr. Drive power: 15 kW Cylinder heating capacity: 9 kW General information: Caption: Polskie Delivery time: Short term Size(m) LxWxH: 3.8 x 1.4 x 2.0 m Weight: 3.200 kg

Production year: 2006 Injection unit: .../150-150 Screw diameter: 30 / 30 mm Injection volume: 77 / 77 cc Injection weight: 72 / 72 g Tool closure system: 200/... Clamping force: 200 t Distance between tie rods: 570 x 570 mm Tool height: 400...1050 mm Ejector stroke: 225mm On the photos shown, the peripherals are not always included.

Production year: 2007 Injection unit: .../800-350 Screw diameter: 35 / 35 mm Injection volume: 139 / 139 cc Injection weight: 131 / 131 g Tool closure system: 320/... Clamping force: 320 t Distance between tie rods: 720 x 720 mm Tool height: 300...1400 mm Ejector stroke: 250mm General data: Pick-up date: Immediate Dimensions (m) LxWxH: 6.83 x 2.25 m Weight: 17.000 kg Instrumentation: 1 x Defective conveyor belt 1 x roller conveyor Turntable Rotameter 8 sections Rotameter 12 sections Rotameter 4 sections 3 x Cores Euromap 67 4 x Pneumatic valves 2 x Hauls On the photos shown, the peripherals are not always included.

Production year: 2004 Control: NC4 Injection unit: .../200 Screw diameter: 25 mm Specific injection pressure: 2400 bar Injection volume: 61 cc Injection weight: 54 g Tool closure system: .../500 Clamping force: 50 t Tool plate dimensions: 520 x 520 mm Distance between columns: 355 x 355 mm Tool height: 210 mm Opening distance: 400 mm Max.Distance plates: 610 mm General data: Pick-up date: Immediate Dimensions (m) LxWxH: 3.7 m x 1.4 m x 1.8 m Weight: 2900 kg

Injection moulding machine Demag Ergotech 5000-5200 Parameters: Production year: 2001 Control: NC10 Injection unit: .../5200 Screw diameter: 95 mm Specific injection pressure: 1550 bar Injection volume: 2835 ccm Injection weight: 2550 g Tool closure system: 5000/... Clamping force: 500 t Tool plate dimensions: 1300 x 1200 mm Distance between columns: 900 x 800 mm Tool height: 400...880 mm Opening distance: 810 mm Maximum plate distance: 1690 mm Ejector stroke: 230 mm General data: Dimensions (m) LxWxH: 9,40 x 2,30 x 2,50 m Instrumentation: 6 x pneumatic cascade 2 x Hydraulic Core

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Injection moulding machine Demag Ergotech 25/280-35 Parameters: Production year: 2006 Injection unit: .../35 Screw diameter: 18 mm Specific injection pressure: 2099 bar Injection weight: 20 g Pump motor power: 7.5 kW Cylinder heating band power: 5 kW Tool closure system: 250/... Clamping force: 25 t Tool plate dimensions: 460 x 450 mm Distance between columns: 280 x 280 mm Ejector stroke: 100 mm General data: Weight: 2520 kg Dimensions (m) LxWxH: 3,3 x 1,2 x 2,0 m Net price given. We invite you to our other auctions where you will find other peripherals and injection machines. europnet.eu

BOY 90A (102) Description Without funnel General information Item number: 102 Availability: In stock Year of construction: 2006 Brand: Boy Specifications Injection weight: 193 g Clamping force: 900 kN Screw diameter: 42 mm Spray pressure: 1724 bar Tie bar distance: 430x360 mm Clamping plate size: 635x610 mm Tool installationheight min.: 250 mm Control: Procan CT Language: German Power: 26.3 kW Operating hours: 15070 h Weight: 3100 kg Dimensions: 4.9x1.2x2.1 m Funnel: No

Here we offer a well-maintained injection moulding machine. Manufacturer / Type:BOY Type: XS (100-14) Serial No.:will be communicated in case of interest Year of manufacture:2015 Operating hours:25.000 h Version:Procan Alpha 2 / S1 Clamping unit Clamping force:100kN tie bar distance:160 x 110mm (2 tie bars) Mould installation height min.:100mm Platen distance max:250mm Ejector stroke:50mm Injection unit: Injection unit:cylinder ø14mm Shot weight max.:6,1 g/PS Injection flow:22g/sec Spec. injection pressure:2298 bar Sprue extractor integrated Dimensions & weights: Weight with control cabinet: 485 kg. Length: 1480mm Width (machine only):520mm Height min - max:1380 - 1690mm Oil capacity:28 L The visible mini-laminar flow unit and the stainless steel area cover belong to the machine Other possibly visible peripheral devices do not belong to t ...

Key data: 900 , 252 , 48

Our team are currently working on this 2008, BOY 90M injection moulding machine. It comes fitted with the Procan MD controller, 48mm plasticising unit with bi-metallic barrel and single core pull and two 16A sockets. It has only 35,000 recorded run hours. BOY 90 machines are some of the smallest (footprint) machines around for their clamp size. The design of the clamp unit on these machines means easy access for tool mounting and clear space below the clamp unit for conveyors etc. Very popular machines on the used market and support are readily available from various sources across Europe as there are a lot of these machines in operation. Come down and have a look yourself. Refurbished machines from STV Machinery undergo a comprehensive refurbishment procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault  ...

Inv. Num. : 6282 Type: TM 1300 RA2 Producer: Battenfeld Generated: 2001 Parameters: Clamping force: 130 t Injection weight: 6000 kg Equipment: Wittmann Robot System

Inv. Num. : 6279 Type: ES 500/90 HL-ST Producer: ENGEL Produced: 1998 Parameters: Clamping force: 900 kN Equipment: Robot system