mold used for sale

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

This MOLDMASTER Y-602 ZLC (2001) Erosion machines was manufactured in 2001 in Taiwan. It is equipped with 3 axis (X = 1000 mm / Y = 600 mm / Z = 500 mm) and a table size 1250 x 750mm with max. workpiece load of 4500 kg. The machine comes with a 120 AMP generator and tank (1900x1100x600 mm).

Manufacturer: Moldow, Type: SA, Control: yes, Year: 1992, Volume flow rate m³/h: ca. 75.000, Filter surface in m²: 690, Qty. filter hoses: 400, Hose diameter in mm!: 220, Length of filter tubes: 2500, Number of filter filter gallerys: 11, Number of fans: 4, 2nd Exhaust fan kW: 22, 3rd Exhaust fan kW: 37, 4th Exhaust fan kW: 15, 5th extractor fan kW: 22, Year :1992

ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts

Sumitomo Demag injection molding Systec Wittmann Robot Sumitomo Demag injection molding machine Systec multi 210/580-430h/200r 2021 Wittmann Robot W822 Z:2500/Y:1400/X:550 2021

ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzle cylinder heating: 1600 +3 x 900 kW Oil tank: 50 l. Voltage: 50Hz Heating: 4.6 kW Total connection: 12.1 kW Weight: 1260kg.

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) Pvlzwy immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h +Schließeinheit+ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 570 x 570 mm Injection unit 1 (150 unit) Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 2 (150cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 3 (60cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 1 ALLROUNDER 420  ...

Used Injection Molding Machine Husky AE230 Year 2015 Injection Molding Machine The Husky AE230 manufactured in 2015 stands as a pinnacle of precision and reliability in the realm of preform molding machinery Crafted by Husky a recognized industry leader it boasts an array of technical features that position it as the premier choice for businesses in the bottling sector Remarkable Production Speed of the Used Injection molding machine Husky One of its standout features is the remarkable production speed clocking in at an impressive 18 000 preforms per hour BPH This rapid pace guarantees an uninterrupted and dependable production process an indispensable asset for large scale enterprises Efficiency and Safety of the Used Injection molding machine Husky The Husky AE230 is equipped with 48 cavities enabling the simultaneous production of a substantial number of preforms This feature signific ...

H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No Walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller

Cycle Times: ? 28 gm (48 cavity) : 24~25sec ? 56 gm (48 cavity) : 25~26sec Including - Mold, 48 Cavities, 27g, for 250ml and 300ml. (Milk Bottle), Mold is not used a lot. - YUDO Side Entry robot included. - Screw diameter: 105 mm - Shot weight max: 3.950 g - Injection pressure: 1.280 bar - Clamping force: 4.500 kN - Mould opening stroke max: 820 mm - Distance between tie-bars h: 850 mm - Distance between tie-bars v: 740 mm - Power: installed max: 390 kW

H400 RS115/100 (29:1) o 1x hydraulic function MVP o 1x hydraulic function STP o Euromap Mold Mounting Pattern o No walkway o Ring check valve o Pin shut off nozzle o Barrier screw MFI 5-30 o Hotrunner control package 24x3 A + 5x 15A o Mixer blender signal o SPC/SQC o 2 Pneumatic valve gates o Euromap 12 Robot Interface o Side Entry Robot interface o Early injection o Proportional carriage control o Dry contact for separate external mold heats controller

Description:  , Series No. 166967 closing force ,850 kN max. approach force 37 kN max. opening force 37 kN max. opening travel 375 mm min. mold installation height ,250 mm max. platen distance 625 mm clear tie bar spacing 320 x 320 mm mold mounting platen 490 x 490 mm Injection unit screw diameter 30 mm max. screw travel 150 mm Approx. Onsite Dimension. (l x w x h): 4,300 x 1,900 x 2,000 mm, weight approx.: 2,700 kg

PS, K-Resin Lid Mold for the ILLIG RDM 58/ 3, dia. 120 mm, 8 Cavity, together with associated stacker Parts

Mold Measured Spoon (baby food), 12 sockets out of 16 work

Used machine in good condition. Available for immediate delivery. - Screw diameter: 80 mm - Clamping force: 2.500 kN - Shot weight max: 1.441 g - Injection rate: 2.000 cm?/s - Injection pressure: 1.665 bar - Injection volume: 1.583 cm? - Screw speed: 240 rpm - Screw L/D ratio: 19,3 - Nozzle stroke / force max.: - / 115 mm / kN - Ejector stroke / force max.: 200 / 85 mm / kN - Mould opening stroke max: 850 mm - Mould height min: 345 mm - Daylight between platens max: 1.195 mm - Platen size (h x v): 970 x 1.035 mm - Heating zones: 4 + 1 - Distance between tie-bars (h x v): 630 x 630 mm - Ejector force: 85 kN - Mold opening force: 144 kN - Oil tank capacity: 680 l - Power: installed max: 77 kW - Weight: 18.500 kg - Dimensions (long x wide x high): 8.220 x 2.160 x 2.660 mm

SANDRETTO series 8 612/95 Clamping force: 95 T Distance between tie rods: 370 x 370 mm Dim trays 560 x 560 Min / max mold thickness: 100 - 460 mm Opening stroke: 410 mm Injectable volume: 392 cm3 Material pressure: 1560 bars Screw diameter: 50 mm total installed power 34.8 kW Weight: 5700 kg Euromap 12 robot interface 2 aux cores (PF and PM) 3 socket table With magnetic plate (TECNOMAGNETE 2009) top dosage

Inv. Num. : 5849 Type: IS 220 GN Producer: TOSHIBA Created: 2002 Parameters: Clamping force: 2150 kN Screw diameter: 50 mm Injection capacity: 490 cm³ Injection mass: 450 g Min. height of the clamping plate: 870 mm Min. width of the clamping plate: 820 mm Distance between stands (horizontal): 610 mm Distance between stands (vertical): 560 mm Ejector force: 140 kN Ejector stroke length: 800 mm Maximum spray pressure: 201 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1340 mm Machine height: 1840 mm Spray weight: 8600 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 55 mm - Clamping force: 2400 kN - Shot weight max: 456 g - Injection rate: 2.375 cm?/s - Injection pressure: 1.890 bar - Injection volume: 475 cm? - Screw L/D ratio: 22,7 - Nozzle stroke / force max.: 88 mm / kN - Mould opening stroke max: 510 mm - Mould height max: 800 mm - Mould height min: 260 mm - Distance between tie-bars (h x v): 630 x 630 mm - Mold opening force: 534 kN - Core pulls: 0 - Oil tank capacity: 420 l - Operating hours: 0 - Power: installed max: 55 kW - Weight: 15.800 kg - Dimensions (long x wide x high): 7.208 x 2.075 x 2.187 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 293 g - Injection rate: 230 cm?/s - Injection pressure: 2.360 bar - Injection volume: 318 cm? - Screw speed: 230 rpm - Nozzle stroke / force max.: 350/67 mm / kN - Ejector stroke / force max.: 200/83 mm / kN - Clamping force: 3.000 kN - Mould opening stroke max: 850 mm - Mould height min: 350 mm - Daylight between platens max: 1.200 mm - Platen size (h x v): 1050 x 650 mm - Mold opening force: 196 kN - Control: CC100 - Oil tank capacity: 810 l - Power: installed max: 55 kW - Dimensions (long x wide x high): 6.700 x 2.000 x 2.300 mm - Weight: 21.000 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 30 mm - Shot weight max: 77 g - Injection pressure: 2.500 bar - Injection volume: 85 cm? - Ejector stroke / force max.: 22 / 10 mm / kN - Daylight between platens max: 550 mm - Heating zones: 3.200 x 1.310 x 1.800 - Platen size (h x v): 540 x 540 mm - Distance between tie-bars (h x v): 321 x 321 mm - Mold opening force: 40 kN - Control: MC4 - Oil tank capacity: 170 l - Power: installed max: 15 kW - Operating hours: 55.000 - Weight: 2.300 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.200 kN - Shot weight max: 63 g - Injection rate: 104 cm?/s - Injection pressure: 2.400 bar - Injection volume: 69 cm? - Screw speed: 550 rpm - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 130 / 40 mm / kN - Mould opening stroke max: 500 mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Mold opening force: 38 kN - Control: CC200 - Oil tank capacity: 300 l - Power: installed max: 22 kW - Weight: 7.200 kg - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm

Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons Cl7cdq8 tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hann ...

used injection moulding machine 2-colours 2-K (45° arrangement of the 2nd unit) from clean room production Manufacturer: Arburg Type: 570C 2000-350/150 Control Selogica year of construction: 2007 Extras / Special features - Robot interface - 4x core pull - Technology level 2 and 3 (3 control pumps) - screw and barrel highly wear resistant - open nozzle - position controlled screw - Accumulator system f. fast injection - hydraulic accumulator - injection pressure increased for 2nd unit - Extension of tie bars of min. mold installation height to 500 mm Opening stroke unchanged - cores freely programmable - blow-out device - Interface for temperature control units - Control extension f. special signals - Interface coloring ( unit 1 u. 2 ) - interface vacuum valve B797ctcwes - additional heating control circuits for nozzle and nozzle tip - 12 electrical he ...

Blow mold for carafe, 10 liters (Flask).

Mold heating, fan heaters, heating, gas heating, construction heating, construction dryers, heating, hall heating, gas heating for casting molds, foundry technology -Manufacturer: Junker, gas heating WA 26532 on a mobile transport frame -Burner: Wiedemann B202 H2-3 175 kW -Blower: Spelleken 5.5 kW volume flow 500 m³/h -Individual components/accessories: see photos -Dimensions 1500/1250/H2010 mm -Weight 625 kg

Nv. Num. : 7150 Type: ALLROUNDER 275 V 250 Producer: ARBURG Generated: Parameters: Clamping force: 250 kN Height of clamping plate: 150-250 mm Ejector stroke length: 225 mm Opening the mold: 375-475 mm

The machine is almost brand new. It was produced in 2021 February and installed in 2021 July it includes : - AL-250-50S ISBM machine - Mitsubishi RV-3SB , 5 axes take out robot with complete cell / conveyor , controller and teaching pendant - Wittmann Dry MAX E60 PET dryer (2013) The machine has the following extra options: - EN (European Norm compatibility) specification (value: JPY2,500,000) All the other options: (value: JPY960,000) -Blow clamping short stroke - blow core short stroke - Lip cooling circuit - blow & bottom mold chiller cooling, The machine will be in production until 2023 January. It is possible to see in running.

Key data: 1000 kN

Inv. Num. : 7219 Type: 100-380 AX Producer: Krauss Maffei Created: 2010 Parameters: Clamping force: 1000 kN Screw diameter: 40 mm Injection capacity: 200 cc Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 410 mm Opening the mold: 350 mm Operating pressure: 1860 bar Machine length: 4950 mm Machine width: 1700 mm Machine height: 2000 mm Injection weight: 5150 kg

Used Injection Molding Machine Husky GL 300 P100 110 E120 Maximum shot weight 3 344 gm Maximum throughput 660 kg h Includes PET Resin dryer and hopper take out robot 3 stage no dehumidifier This machine includes a 8 5gm 30 25 preform mold Machine was in production until end February 2020 [...for more information send your inquiry to the seller.] refno: PR09

Used Blow Moulding Machine SIAPI EA20 120 2 Year 2004 1800 Bph AUTOMATIC BLOWER SIAPI EA20 120 2 2 CAVITA 2004 suitable for blowing PET bottles up to lt 5 from preforms complete with Automatic preform feeder Automatic preform orientator Machine electrical panel Mold and chiller excluded Production 1 800 bph Machine protections working Manuals available Working hours 25 000 Currently stopped in stock Neck type PCO 1810 neck 32 neck 30 25 Air recovery system present [...for more information send your inquiry to the seller.] refno: SO76

Used Stretch blow molding machine SIDE linear SBM speed 2000 BPH Manufacturer and year SIDE Spain 2002 Mold 8 5 L with 2 cavities square Can blow preforms for 3 5 6 8 liters with a neck size of 48 mm Has hopper No compressor or cooler are offered The machine is in good condition and regularly maintained Dimensions width 2245 mm length 3600 mm height 2060 mm Space required for the Used Stretch blow molding machine The blower itself needs about 20 m2 and the rest depends on what equipment you will get compressor cooler The blower power is 80 kW High pressure required Max 40 bar air 300m3 h otherwise it worked with 32 33 bars Low pressure 6 10 bar 100m3 h The refrigerator should be cooled to 6 10 C at a pressure of 3 5 bar Technical documentation is available Spare parts are available Stopped working 2 years ago but can be seen in operation [...for more information send your inquiry to the  ...

Used Blow Molding Machine SMI SR12 2007 This used blow molding machine manufactured by SMI in 2007 is a reliable and efficient machine designed for PET containers The model is SR12 and it is capable of producing containers with a format of 1 5 L With 12 cavities this machine has a high production capacity and can produce large quantities of containers in a relatively short amount of time One of the advantages of this machine is its preform loader preforms tipper and preforms unscrambler which help to streamline the production process and make it more efficient The preform loader automatically loads the preforms into the machine the preforms tipper tips the preforms into the mold and the preforms unscrambler helps to orient the preforms in the correct position for molding The preform neck type for this machine is PCO1810 which is a widely used neck finish for PET containers This blow mold ...

Type Injection Moulding Machine Category Plastic Processing Brand Ferromatik Year 1999 Condition Used Location Switzerland Machine Specifications Controller NA Clamping Force 110 Ton Screw Dia. 40 mm Machine Description This Ferromatik Milacron K110 S D0gzkm Injection pressure 2240 bar Distance between tie bar 470 x 470 mm Closing force 1100 kN injection molding machine was manufactured in 1999. Production hours 24'456. Mold opening stroke 550 mm Screw diameter 40 mm. Weight of the machine 5'500 kg

SANDRETTO series 8 430/150 with SEF 100 Clamping force: 150 T Distance between columns: 460 x 460 mm Min / max mold thickness: 155 - 560 mm Opening stroke: 500 mm Tray dimensions: 690 x 690 mm Injectable volume: 286 cm3 Material pressure: 1500 bars Screw diameter: 45 mm total installed power 29 kW Weight: 7000 kg Dimensions: 6.36 x 2.08 x 1.50 m Euromap 12 robot interface core top dosage

SANDRETTO series 8 790-200 SEF100 Clamping force: 200 T Distance between columns: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Tray dimensions 770 x 770 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000 kg Dimensions: 7.26 x 2.30 x 1.58 m

SANDRETTO series 8 790-200 SEF 90 Clamping force: 200 T Distance between tie rods: 510 x 510 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 546 cm3 Material pressure: 1450 bars Screw diameter: 55 mm Weight: 9000kg Dimensions: 7.26 x 2.30 x 1.58 m Euromap 12 robot interface (CHAVERIAT A.111.24.PM - CH 2002 from 07/1998 as an option possible)

SANDRETTO series 8 1334/330 Clamping force: 330 T - 3300 KN Distance between tie rods: 650 x 650 mm Tray dimension: 980 x 980 mm Min / max mold thickness: 200 - 730 mm Opening stroke: 550 mm Injectable volume: 863 cm3 Material pressure: 1550 bars Screw diameter: 65 mm Heating power: 37 KW Total machine power: 57 KW L/D ratio: 21 Weight: 15,700 kg Dimensions: 7.85 x 2.36 x 1.85 m Euromap 12 robot interface aus core top dosage

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie rods: 510 X 510 mm Tray dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Material pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage Weight: 8100 kg Dimensions: 6.13 x 2.08 x 1.59 m

Inv. Num. : 5851 Type: IS 280 GS Producer: TOSHIBA Created: 1996 Parameters: Operating hours: 24,593 h Total number of injections: 7,410,962 Clamping force: 2774 kN Screw diameter: 60 mm Injection capacity: 930 cc Injection mass: 855 g Min. height of the clamping plate: 900 mm Min. width of clamping plate: 900 mm Distance between uprights (horizontal): 610 mm Distance between uprights (vertical): 610 mm Ejection force: 152 kN Ejector stroke length: 760 mm Maximum Spray Pressure: 192 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1900 mm Machine height: 1900 mm Injection weight: 12400 kg

Inv. Num. : 6298 Type: 1000-430 Producer: DEMAG Created: 1995 Parameters: Clamping force: 100 t Screw diameter: 40 mm Injection capacity: 231 cm³ Injection mass: 205 g Min. height of clamping plate: 580 mm Min. width of clamping plate: 590 mm Distance between uprights (horizontal): 400 mm Distance between uprights (vertical): 400 mm Opening the mold: 500 mm Machine length: 4200 mm Machine width: 1400 mm Machine height: 1900 mm Injection weight: 4200 kg

Screw diameter; 95 mm Injectable volume: 3360cm3 Injection pressure: 1895 bar Column width: 1000 x 900 mm Minimum mould thickness: 40 mm max: 950 mm Aperture stroke: 930 mm Cores: 4 Robot Interface: Yes Options: Retractable Column - Electric Dosing Motor 24 Zones Mold Heater Magnetic trays 8-point sequential injection Blow guns: 2 3-axis robot

Screw diameter; 40 mm Injectable volume: 201 cm3 Injection pressure: 1859 bar Turntable: 1040 mm Mould thickness min: 300 mm max: 600 mm Cores: 3 Robot Interface: Yes Mold Heating Zones: 8

Used Blow Molding Machine KRONES Contiform C312 PRO Year 2016 Introducing the Blow Molding Machine KRONES Contiform C312 The KRONES Contiform C312 PRO blow molding machine manufactured in 2016 represents the pinnacle in the bottling industry Crafted by the renowned German company Krones this model delivers reliable high quality performance to meet the most demanding sector requirements Performance and Capacity of the Machinery Featuring a 12 cavity mold the Blow Molding Machine KRONES Contiform C312 operates at a maximum speed of 27 000 bottles per hour bph This remarkable production speed ensures a steady efficient flow thereby optimizing processing times and maximizing productivity Versatility and Adaptability of the Blow Molding Machine KRONES Contiform C312 Moreover its ability to adapt to various product types including square and round shapes makes the Contiform C312 PRO highly ver ...

Description: Serial number 93307538 Clamping force 350 Ton, 3500 kN , Distance between the tie bars (HxV) 530 x 530 mm , Mould size 200 x 650 mm Diameter 70 mm Shot volume, calculated injection 990 cm3 Material pressure 1.980 bar Opening stroke: 600 mm Volume injected: 1347 cm3 Material pressure: 1450 bars Screw diameter: 70 mm Heating power: 23 KW Min/max mold thickness: 200 - 650 mm Dimensions 8010 x 1400 x 2480 mm Weight 14500kg Approx. Onsite Dimension. (l x w x h): 8,010 x 1,400 x 2,480 mm, weight approx.: 14,500 kg

Used Blow Molding Machine KRONES Contiform S14 year 2014 Introduction Revolutionizing Bottling Operations In the realm of bottling technology the Used Blow Molding Machine KRONES Contiform S14 crafted in 2014 emerges as a paragon of efficiency and precision Developed by Krones this rotary type machine redefines the standards of production boasting unparalleled features and capabilities Engineering Excellence Unraveling the Components At the core of the Contiform S14 lies a meticulously engineered mold with 14 cavities designed to accommodate diverse production needs This configuration ensures optimal utilization of resources while maintaining high output rates Complementing this design is the machine s impressive operational speed reaching up to 28000 bottles per hour a testament to its efficiency in meeting demanding production schedules Power and Performance A Closer Look to the Blow M ...

Description: Closing unit: , closing force 1000 kN, ,random force 50 kN Opening stroke 500 mm Mold mounting height 250 mm Distance between the clamping platens 750 mm Light column spacing 420 x 420 mm Ejector force 40 kN, ejector stroke ,175 mm Injection unit: screw diameter 35 mm, effective screw length 20 l/d, screw stroke 150 mm Stroke volume 144 cm³ Injection part weight 132 g Injection pressure 1820 bar Approx. Onsite Dimension. (l x w x h): 4,600 x 1,600 x 2,000 mm, weight approx.: 3,200 kg

Key data: 62 kN

Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, turntable and additional automation Year of construction: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - Touchscreen Additional equipment: Production line with robot, turntable and additional automation Vertical Injection Molding Machine Air Valves Injection for mold division Automatic adjustment of the injection unit setting (top - bottom) The turntable is driven by a servo motor, which is controlled by an inverter – very precise Automatic part feeding with quality control system Machine workstation protection with safety package Metrics: Weight: 350 kg Length/Width/Height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected ma ...