mold used for sale

CNC Deep Hole Drilling Machine Milling Machine for Tool and Mold Making Manufacturer CHeto Model HETO 2000 Year of construction 2005 Traactions xyzw 2000/1200/650/1500 mm, table load 12000 kg. Machine immediately available and available. Dismantling and loading onto suitable trucks is cost-effective. Installation and commissioning on request.

Key data: 640 mm, 1185 mm

1 Turning and milling center DMG GMX 250 Linear, YOC 2008 Control Siemens 840 D Powerline Turning length 1185 mm, circulation diameter 640 mm Planweg X 1 . 550 mm, X 2 . 180 mm Longitudinal path Z1 . 1185 mm , Z 2 . 1050 mm Main spindle as integrated spindle motor ISM 65 with 5000 rpm Partial hollow clamping device 68 mm C-axis and spindle brake Cross slide at the top with turning and milling spindle as motor spindle with 3-fold Hirth gearing with 12,000 rpm 1°Indexing for mold fluid locking when turning Y-axis +- 90 mm B-axis +- 120° interpolating with hydraulic clamping Tool magazine with 46 slots Absolute direct displacement measuring systems in all linear axes Coolant tank 600 l with belt filter system Conveyor Star turret 12-speed with tool drive C-axis Counter spindle as integrated spindle motor ISM 76, partial hollow clamping device 67 mm with 5 000 rpm  ...

Meatballs machine, schnitzel cutting machine, shaped meat production, shaped -Body: made of stainless steel -cutting with a guillotine (knife). -The meat is pressed into a mold and cut, -then placed on a conveyor bath by vacuum. -Working method: electro-pneumatic -Dimensions: 2600/700/H1730 mm

Manufacturer MAZAK Model FJV 35-60 Year 2003 CNC MAZATROL FUSION 640M Table Table dimensions 2.240 x 750 mm. Max weight allowed on table 3.000 kg. Number a weight of T slots 5×18 mm. Distance between T slots 150 mm. Speed range 22 – 6.000 rpm Distance from table to floor 830 mm. Travels Longitudinal travel (X Axis) 2.000 mm. Cross travel (Y Axis) 800 mm. Vertical travel (Z Axis) 585 mm. Min-max dist. spindle nose to table 200-785 mm. Distance between columns 880 mm. Freeds Rapid feed X axis 24.000 mm/min. Rapid feed Y axis 32.000 mm/min. Rapid feed Z axis 18.000 mm/min. Max working feed 18.000 mm/min. Main spindle Spindle speed (min-max) 40-10.000 r.p.m. Speed ranges 2 Spindle taper ISO-50 Spindle power 40 HP Spindle torque 529 Nm Automatic tool changer (ATC) Tool taper CAT-50 ATC type Chain Change type Random shortest path Magazine capacity 30 Ma ...

Maximum tool diameter 200 mm Distance between centers 460 mm Surface grinding 200 x 50 mm External grinding dimensions Ø 5 - 50 x 400 mm Internal grinding dimensions Ø 10 - 50 x 75 mm - Workpiece spindle head Rotation range -90° to +90° Speed ​​110 / 200 / 300 rpm MT 2 tool holder Jaw chuck diameter 100 mm - grinding head Rotation range -90° to +90° trip Across 200 mm Vertical 200 mm Vertical scale division 0.01 mm Vertical feed per handwheel revolution 1 mm/rev Graduation across fine / coarse 0.005 / 0.02 mm Side adjustment per turn of the knob 1 / 4 mm/rev Grinding wheel 200 x 20 x 75 mm Speed ​​2500 rpm Internal rotational speed of the grinding spindle 13,500 rpm - worktable Max. stroke 480 mm Hydraulic longitudinal feed 0.01 - 6 m/min Table rotation range -45° to +45° Total engine  ...

The geminiNGM is the 5-axis CNC grinding machine for the serial production of cutting tools. Complete processing around OD and face, up to 300 mm cutting length, diameter up to 300 mm, maximum workpiece length that can be clamped 500 mm. Cutting tools such as end mills, ball nose cutters for mold making, high-performance drills, reamers and profile end mills are all part of the standard requirement. There are specific software packages, grinding processes and clamping systems for the production of shaper cutters with highly dynamic segmented hob grinding, the regrinding of gear cutting tools, end mills, shaper cutters and bevel gear cutters. CNC grinding of knives for the paper, foodstuffs and plastics industries, profile grinding, cylindrical grinding and surface grinding. Numerous accessories for the application spectrum and for increased productivity The machine is in g ...

Cansa NC 76 hydraulic pipe bending machine MAchine is in excellent condition 60 mm and 76 mm mold comes along with machine Maximum bending capacity 76X4 mm diameter Hydraulic motor power 15 kW Max. 190 bending angle Mandrel length 4000 mm

Clamping force: 110 tons Closure system: hydraulic Plate dimensions (H x V): 745x770 mm Dimensions between guide bars (H x V): 470x470 mm Mold min. thickness: 300 mm Screw diameter: 50 mm Injection volume: 393 cm3 Injection weight in PS: 358 g Pressure on material: 1892 bar Length x Width x Height: 5,0 x 1,6 x 2,0 m Weight: 7800 kg Year: 2007 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 8 Pneumatic valves: 1

The ejector is to be replaced. The rest of the machine works fine injection system: Screw diameter - 60 mm Injection volume - 735 cm3 Shot weight - 640 g Injection pressure - 2100 kgf/cm3 Injection speed - 332 cm3/sec Injection speed - 118 mm/sec Screw pitch - 260 mm Screw speed - 175 rpm clamping unit: Clamping force - 260 tons Opening stroke - 850 mm Mold height - 260 mm Max daylight - 1100 mm The distance between the tie rod - 560x560 mm Ejector force - 7.7 tons Throwing stork - 180 mm Clamping speed - 375 mm/sec Opening speed - 500 mm/sec Power system: Pump motor - 45 kW Thermal power - 22.3 kW System pressure - 175 kgf/cm2 Capacity - 700 liters General: Machine size - 6.3x1.7x2.3 m Machine weight - 12.1 tons

Clamping force: 130 tons Closure system: hydraulic Plate dimensions (H x V): 745x770 mm Dimensions between guide bars (H x V): 470x470 mm Mold min. thickness: 300 mm Screw diameter: 55 mm Injection volume: 475 cm3 Injection weight in PS: 432 g Pressure on material: 1564 bar Length x Width x Height: 5,0 x 1,6 x 2,0 m Weight: 7700 kg Year: 2007 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 4 Pneumatic valves: 1

The documentation is available CE certificate is available Documentation is available 4 units available Price is for 1 unit > screw diameter 32 mm > injection volume ~ 190 cm3 (for PS) > injection pressure 1482 bar > clamping force form 50 Ton > minimum mold size 195 mm > max opening 500 mm > 330 x 540 mm plate > column spacing 375 x 200 mm

the press has about 45,000 hours in good working order mounts 42 screw capacity PS 250 grams 1600 bar l/d 20 top dimensions 605x605 column passage 400x400 mold thickness 175-475 plate light max 895 12kw ceramic heating resistors double pump motor power 18kw press dimensions 5.60x1.52x2.06 weight 5500 kg. accessories included: second cylinder + screw (to be regenerated) double nozzle new tip with three spare valves - spare ceramic resistance 300 liter aluminum tank for cooling pieces in water

Manufacturing number: 74448 Production Year: 1983 Closing force: 4,400 kN Maximum opening stroke: 720 mm Mold height min / max: 200/720 mm Screw diameter: 84 mm Technical condition: good The machine is connected to electricity (you can see how it works)

Manufacturing Number: 41757 Production Year: 1985 Closing force: 1750 kN Maximum opening stroke: 450 mm Mold height min / max: 200/500 mm Screw diameter: 52 mm Technical condition: good The machine is connected to electricity (you can see how it works)

Arburg 320 S 500-150 selogica injection molding machine with a robot Year of production: 1999 Control: Selogica TECHNICAL DATA • Closing force: 500 kN • Clearance between columns: 320 mm x 320 mm • Min form height 225 mm • Max mold height 350 mm • Board dimensions: 446 mm x 446 mm • Opening distance: 425 mm • Max distance. between plates 525 mm • Snail: 30 mm • Shot weight: 65 grams PS • Injection pressure: 2210 bar GENERAL • Engine: 15 kW • Total installed power: 21.3 kW • Dimensions: 3.2 x 1 x 1.8 • Weight: 2250 kg • German language control hours worked 45 970 h number of cycles 8 110 434 pcs Injection molding machine in production all the time As additional equipment, the injection molding machine has an original side manipulator for receiving ingots Regularly serviced, very good conditi ...

Manufacturing Number: 42552 Production Year: 1991 Closing force: 2500 kN Maximum opening stroke: 520 mm Mold height min / max: 200/525 mm Screw diameter: 57 mm Technical condition: good The machine is disconnected from the power supply (not working)

Brand: NEGRI BOSSI Model: NB 62 Tonnage: 62 Year of issue: 7/1997 Transparency between ties: 315x315 Screw diameter: 32 Estimated shot volume: 127 Minimum / maximum mold thickness: 120-350 Core pull: 1 Euromap: 620H-220 Mov. plate travel: 130-310 Air discharge: 2

Control type: NC4 Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Cores: 2 Robot interface Bi metal Others: turntable, 2 blow guns

SANDRETTO Serie NOVE 2200/860 from 2003 Injection unit: 860 Screw diameter: 50 mm Screw length L / D: 20 Theoretical injectable volume: 475 cm³ Maximum injection pressure: 1815 bars Maximum injection flow: 193.2 cm³ / s Maximum screw rotation speed: 295 min-1 Closure unit Closing force: 2200 kN Mini / Max mold thickness: 210 - 630 mm Opening stroke: 550 mm Passage between columns: 510 x 510 mm Platen size: 770 x 770 mm General Pump motor power: 30 kW Heat output: 14.2 kW Total installed power: 44.2 kW Quantity of oil: 350 l. Dimensions (Length x Width x Height): 6.135 x 1.65 x 2.08 m. Weight: 8100 Kg

NEGRI BOSSI NB 300 Injection unit: 1760 Screw diameter: 60 mm Screw length L / D: 23 Theoretical injectable volume: 775 cm³ Maximum injection pressure: 2040 bars Maximum injection flow: 220 cm³ / s Max screw rotation speed: 180 rpm Closure unit Closing force: 3000 kN Mini / Max mold thickness: 280 - 680 mm Opening stroke: 640 mm Passage between columns: 630 x 630 mm Platen size: 935 x 935 mm General Pump motor power: 37 kW Total installed power: 62 kW Dimensions (Length x Width x Height): 7.15 x 1.43 x 2.36 m. Weight: 11800 Kg Spare part : A new set of screws + bimetallic sheath with a diameter of 60 mm is available as a supplement.

Engel ES 1350/275 HL ST Year of production: 1999 Injection components: Screw diameter [mm]: 60 Max injection weight PS [g]: 547 Injection pressure [bar]: 1834 Closure components: Closing force [kN]: 2750 Table plates dimensions [mm]: 1050 x 900 Min / max mold height [mm]: 350/850 Ejector stroke [mm]: 380 Control: EC100 Additional equipment: Robot: Engel ER-HLI71 Hot runners - 6 items Hydraulic cores 1 pc Pneumatic cores 1 pc Dimensions: Length / width / height [m]: 7.1 × 2.9 × 2.7 Weight [t]: 19.6 The machine is still in operation and can be inspected at the companys premises. You can make a purchase only after inspecting the machine at the companys premises

Machine dimensions Length 2800mm Width 1500mm Height 3500mm Weight 4500 kg Closing system Closing type vertical; column-less Clamping force 80t Injection system Screw diameter 18 mm Max injection pressure 11.50 Pa Max injection volume 50g Additional equipment cnc control Vertical injection Pressure measurement in the mold

Closing force: 1300 kN Clearance between columns: 420 mm x 420 mm Board dimensions: 605 mm x 605 mm Mold size: min 250 mm Opening distance: 500 mm Max distance between boards: 750 mm Snail: 35 mm Injection volume: 139 cc / 127 grams PS Injection pressure: 2500 bar Motor: 22 kW Heaters: 8 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weight: 4300 kg

Clamping force: 1600kN Clearance between columns: 470mm x 470mm Mold height: min. 180mm, max. 520mm Screw diameter: 45 Injection pressure: 169MPa Injection volume: 320ccm Dimensions (LxWxH): 5.2 x 1.4 x 2.0 m Machine weight 5.5 tons The machine is operational. I have two pieces, the price is for 1 piece.

screw diameter 55mm, max stroke volume 475 cm3, injection pressure 1179 bar, increased injection pressure 1579 bar, clamping plates 860x830mm, max mold height 700mm, max plate spacing 950mm, 146156 Mh, included in the sale and price is the manipulator ERC43/1-EA

Clamping force: 125 tons Closure system: hydraulic Plate dimensions (H x V): 805x770 mm Dimensions between guide bars (H x V): 530x470 mm Mold min. thickness: 300 mm Screw diameter: 45 mm Injection volume: 275 cm3 Injection weight in PS: 250 g Pressure on material: 1878 bar Length x Width x Height: 4,48 x 1,5 x 2,2 m Weight: 7690 kg Year: 2005 Equipment: Hydraulic ejector Ejector stroke: 150 mm Ejector force: 22,6/9,9 kN Cooling circuits: 6

Linear blow molding equipment for sale with a capacity of 6000 bottles/hour for 0.5 pet containers and 4000 bottles/hour for 1.5 pet containers. There are guarantees, no defects. Main equipment parameters 3500, 0 × 1450, 0 × 2000, 0 Release year 2020 Country of origin Shanghai, China, all packed and ready to ship. The price includes all the necessary additional equipment for the full cycle of production of pet containers. There are also 4 bottle designs included. We can connect everything at your facility and make start-up equipment. 1. Automatic feeding of the preform to the blow molding machine 2. High pressure compressor 3.2M³/3.0MPA 3. Low pressure compressor 2.0M³/1.0MPA 4. Dehumidifier and air purifier 5. Air buffer for 500 bottles. 6. Preform cooling equipment. 7. Filters Includes 4 preforms (included in the price) 1. Presform 500ml 4 bottles (2  ...

Characteristics: - Year of production: 11/2006 - Hours of operation: 8000 - Overall dimensions of the machine 3500mm x 5200mm h 5100mm - Weight: 7700kg - Maximum plate size: 2000x1200 - Maximum mold height: 800mm - Cooling fans: 8 - Sheet thickness: 2 - 10 mm - Adjustable frame Elements of the quartz heating surface - Size 240x150mm - Quartz type - Installed power 107kW The CmsPlast Villa 2000 - BR/5 2012 vacuum plate thermoforming machine is a 2006 machine, which uses quartz technology to produce plastic objects with high productivity and molding precision. The processing field of the machine is 2000 x 1200 h 800 mm, which makes it ideal for producing large objects.

ILLIG SB74 C 9 Thermoforming and punching machine Vacuum forming and punching machine for plastics. Workbench maximum 505x775 We have shutters to change the dimensions, 770x455, 400x770, 340x770 The maximum height of the die (mold) 100mm Film thickness 0d 0.15 -2.0mm Year of production 1985 - in 2019 it underwent a comprehensive modernization of automation (diagrams in the pictures) Visible in the photos. (control cabinet, controller, touch panel.) 400V power supply Input power:11.2 kW completely new drivers and diagrams. modernization completed in August 2019 since then machine worked approximately 6000 hours panel has English and Polish languages

DESCRIPTION KIEFEL Model: KL 1 SH 52 BFS + KVH 83 Preheating Model type Nr.34.322-08.35, Identity.Nr. 100-035, Tp-No. 157/93 Year of construction - 1993 Forming Area: 540x420mm Film Width: 570mm Foil thickness: min 0.2mm - max.3mm Depth of draw positive / negative : 140mm / 140mm Materials: PET, PVC, PP, PS, HIPS Condition - in use, in production Location: Bucharest, Romania, 050192 Other details: - Number of stations : 5 - Preheating, Forming, cutting in mold, punching, stocking. Preheating for PP foil, model KVH 83, 2050/2200 / 2550mm, Length 2950mm, Width 1400mm, Weight 700Kg, max 150 Celsius degrees - the documentation in original (5 books) + scanned (PDF files) - a lot of spare parts - we have the software saved - working pressure: 6 bar - voltage: 3x400V + N + PE, 50Hz - dry cycle strocke / min ...

Thermal transfer machine for transferring a thermal transfer film to PVC, LEATHER, GLASS, MDF and everything that lies on the film. The machine was bought new in 2014, Mercedes is among its peers, the working area is 1020 mm, the height, width, clamping forces are adjusted, the equipment is fully operational, everything is working properly, we are still working on it, we will show, teach, load, send 2014 Korea production, mold size 3000mm 1000mm he was taken new If you buy the whole kit, then we’ll put another 5 molds for making 3D molds plus a thermo transfer film, for all this.

1 piece of used corrugator suitable for the production of tubes ø 10-58 mm designed for overpressure production (no vacuum) Mold jaw chain length, designed for 40 pairs Manufacturer: Fränkische Type: F3UK Year of construction: 1989

Wet cast concrete pipe production plant for sale • Fully automated factory designed and developed by Consmema/KTB • Fully complete set of machinery • In operation since 2016 in West Europe • Capacity up to 300 pipes per day in different sizes: 300- 1500mm • Very distinctive pipes: smoother, lighter and sawable • For sale because of strategical redirection of selling company Completely new way of manufacturing • Use of Self-Compacting Concrete (SCC) – wet cast • High degree of automation • Good and clean working conditions • Leading to high quality pipes and unique products • Easy to cut to suit with notches • Remaining part can be re-used, no waste material • No butt, spigot or socket pipes required • Inside pipe wall is smooth because of wet instead of dry concrete: better flow of (waste) water • More than 20% lighter and thinner th ...

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

Injection moulding machine ENGEL CL 2550/550 Year of production - 2005 Robot name – "ENGEL ERC53/1-F" Clamping force [tons]- 550 Maximum distance between plates [mm]-1650 Min. mould height [mm]-310 Max. mould height [mm]-800 Column spacing (mm) -915x860 Mounting plate size(mm)-1345x1280 Ejector stroke (max) [mm]-250 Screw diameter [mm]-80 Injection weight [g]- 1800 Oil quantity [liter]-1000 Mold Injection Sequence -2 Robot machine ready to work Number of hydraulic cores S/R- 1/1

Battenfeld BA 2000 / 1000 BK injection moulding machine Year: 1997 Driver Version: Unilog 4000 B Technical Details : Clamping Unit: Clamping force: 2000 kN Mold plate size (h x v): 800mm x 800mm Distance between columns (h x v): 560 mm x 560 mm Mould opening stroke: 450mm Mould height min.: 220 mm Maximum mould height: 520 mm Max. daylight: 970 mm Hydraulic ejector - stroke: 160 mm Forward/reverse ejector force: 67 kN Injection Unit Screw diameter : 55 mm Ls/D Ratio: 20 Injection pressure: 1943 bar Injection volume: 522 ccm Injection weight, PS: 595 g Auger speed: 285 1/min Maximum plasticizing rate: 49 g/s Nozzle pressure: 131 kN Electrical & Hydraulic Equipment Nominal pump motor capacity: 30 kW Installed heating capacity: 22.6 kW Tank capacity: 560 ltr. Dimensions & Weight Machine dimensions: 5.65 m x 1.45 m x 2.10 m Total weight of the machine: 9800 kg

ID2955 Key Maker Magic 1211 year/Year of construction 1984 Manhole finisher, 1 piece Magic 1211, with 2 Atlas 300 + 400 molds, 2 palisade molds, 1 built-in mold, 1 vibrator incl. FU, various base sleeves Shaft paver, 1 piece Magic 1211, with 2 pieces of moulds Atlas 300 + 400, 2 pieces of mould palisades, 1 piece of mould installed, 1 piece of vibrator incl. FU, various lower sleeves

Key data: 500 mm, 400 mm, 300 mm

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...

Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 [kN] (20 [T]). Speed range: 100 - 1800 [spm]. Year of manufacture: 1996. Feed BBV 101/75 on the right-hand side. Max. strip width: 125 [mm]. Max. feed distance: 75 [mm]. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 [mm]. Ram height adjustment: 51 [mm]. Dimensions of the clamping plate (clamping plate): 510 x 400 [mm]. Bed opening: 400 x 160 [mm]. Mbawvyqg Max. distance of the mold width between the columns: 410 [mm]. Max. strip passage width: 260 [mm].= Connected load: 36 [kVA]. Power 400 [V] 50 [Hz]. Control voltage: 24 [V]. Machine dimensions: H 2540 x W 1661 x D 855 [mm]. Machine weight: approx. 3100 [kg]. Control cabinet and control system. Including all original technical documentation. Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

A vacuum former used in the illuminated sign making industry, but has other applications as well. Bought in December 2017, has been used less than 100 hours. In a very good condition. Manufactured by Computerized Cutters Inc. Original price 43 545€. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch ) Sheet size 1500 x 2000 mm ( 59 inch x 79 inch ) 2. Minimum thickness 2 mm ( 0.078 inch ) 3. Maximum thickness 5 mm ( 0.196 inch ) 4. Maximum size to form 1300 mm x 1800 mm ( 51 inch x 110 inch ) depending on used material and form of the mold. Material PET-G, Polycarbonat, acrilic, PVC, ABS, etc, Vacuum pump. Type 12 PBO Capacity 7 CFM (12 m3 / hr) Vacuum 10 mbar ( 0,145 PSI ) Vacuum. Used vacuum level-0.9 bar ( -14.5 PSI ) Content vacuum t ...

Engel Victory 330/90 injection molding machine for sale. Year of production: 2009. Clamping force: 90 tons. Screw diameter 40 mm. Hours worked: approximately 60 thousand. The machine is in very good technical and visual condition. Working machine, possibility of testing on the buyers injection mold.

VARGA FLEXO 800 Type HK68,, C.I. flexo printing,geared, 6 colors, working width 800 mm., Printable materials:, - Pre-treated plastics (PET, PE, BOPP), - Multilayer films, - Paper, - Lenze servomotors installed in machine- main drive, unwinding, winding, - pressure cylinder: central impression, - CI pressure cylinder material: ST52–3, - number of printing stations: 6 pcs, - printing length: 30–55 cm, - print length scale: 1 cm, - printing accuracy at constant speed ± 0.2 mm, - length register setting: manual, - cross register setting: manual, - maximum print width: 800 mm, - Maximum roll width: 900 mm, - Unwinder: 1 pc, - core diameter : 76 mm, - Maximum diameter of reels: 1000 mm, - mechanical speed: 15–120 m / min, - Machine weight: 7 tons, Equipment:, - Automatic, two-way winding and rewinding system that maintains a constant tensile force after setting the material parameters.  ...

Used Dairy Complete Line PET for water and Milk 9000 BPH 2010 Milk bottling line FRESH Milk bottling line Blower unit Blow Molding Machine SMIFORM SR6 Cavity rotary type This Milk bottling line has a neck of 38 plastic cups and is complete with all the auxiliary equipment for production like tilting lifting orienting preform and a chiller unit for cooling the mold section of the blower This Milk bottling line was used really little time only one shift two days a week and regular maintenance from skilled technicians Filling unit of the Milk bottling line With this blower unit in this Used Dairy Complete Line PET we have Triblock Metalnova making PET GLASS with double capping Plastic screw as part of the Monoblock and also Capper Twist Off stand alone for this Milk bottling line That allows the buyer to work both with Used Dairy Complete Line PET ultraclean solution in this Milk bottling l ...

Used Complete PET Line for Water 3000 bph 1 6 x BM500 Blow Mold system with 2 x 25 H P Commercial Air Compressors mounted on 1 x 240 gallon 250 p s i pressure tank 6 x pre heaters 6 x Blow molders capacity up to 3000 bottles per hour Complete with top of the line air preparation and air pressure units for a consistent reliable and oil less air supply 2 Ozone system BWOZ27 Deluxe ozone disinfection system Capacity up to 190 L water per minute Utilizes 100 gallon stainless steel tank for ozone contact time Complete with an oxygen concentrator ozone generator Visual inspection contact tube stainless steel pump venturi injector central electric controls and mounted on stainless steel frame Used Complete PET Spec 3 BR3000 bottle insert capacity up to 3000 bottles per hour automatic rinsing and position of bottles insuring clean bottles 4 BF3000 bottle filler capacity up to 3000 bottles per ho ...

Used Filling Line For 5 And 10 Liters Pet Bottles 2005 The line is structured to permit the production of da 5 0 L e 10 0 L PET bottles Approximate capacity 800 BPH on 5lt and 450 BPH PET Containers The line has filled in a total of less than 10000 bottles It was then not used as the contract stipulated with the final client was canceled and the company owning the machines was not interested in creating a new market for such a product The mechanical parts are practically new Besides the usual change of the gaskets for the valves will be required as they get dry after a time the line does not work and there might be some electronic adjustment of the palletizer to be done based on the formats the final buyer will want to produce Otherwise the line was inspected and all is in order The line is composed of the following machines Pre forms orienting system and transport to the pre heating tun ...

Used Complete Bottling Line EKTAM for 5L PET bottles up to 4400 bph Blowing Machine The machine integrates a blow molding machine SMI preform damper and chiller unit for mold cooling The machine accumulates 11 931 hours of work indicating reliability and durability It uses only original spare parts ensuring optimal performance And supports preforms with a neck diameter of 48 mm offering versatility in production Cooling Unit Essential for thermal stability the Cosmotec unit regulates the temperature of the process in the Used Complete Bottling Line EKTAM for 5L PET bottles It guarantees the preservation of the mechanical characteristics of PET bottles during critical phases Bottle Filling Monobloc of the used Complete Bottling Line EKTAM for 5L PET bottles Ektam s monobloc manages the washing filling and capping of the bottles Suitable for 48 mm preforms it guarantees precise and hygieni ...

Concrete block production plant Masa Henke for the production of paving stones, lightweight air-conditioning building blocks. Price and scope of delivery can be negotiated directly with the seller at the time of installation. - Daily output in one layer approx. 1200 boards. - Board size 1050 x 1400 mm, up to height 270 mm (max. 330 mm) - Control S5/S7 composed of: Stone Paver Masa/ Henke with Core & Endpaper - Masa Quick Tensioning, Color System & Cross Cleaning - Transport to the lifting ladder, per lift and lowering ladder - Transfer table/vehicle group (up to 20 t) with slewing ring - Reversible device - Stacking device - Pallet Insert (SFH) - Board magazine with side slot - Automatic packaging machine with hydraulic station - Board care unit - Horizontal/vertical strapping - Drying chamber 12 chambers, each 11 levels (3120 boards) -Chain conveyor - Mixing plan ...