mold used for sale

Urola USP-2FL Blowmoulding machine 2004 Urola double mold bottle blower of 5 lt 3,300 bottles / hour, molds and tipper included, the machine is brand new

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 mm min./ max. mold height [mm] min 350 max 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Universal tool milling machine from lid suitable for tooling, fixture making, mold making as well as training Travel: 300x160x340mm Speed:40-2000 rpm Recording: SK 40 Table 600x210mm Longitudinal path (X,Y,Z axis) 300x160x340mm Tool holder: SK 40 Vertical spindle speeds: 40-2000rpm Feeds 2-2000mm/min Connection 50 Hz 3x 380V Spindle motor 1.8KW Machine weight approx. 700kg Dimensions 1000x1600x1000mm

Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1050 x 900 min./ max. mold height [mm] 350 - 1200 injection unit Screw diameter [mm] 60 Injection volume [cm3] 735

Clamping force [kN] 250 Dimensions of mounting plates (hxv) [mm] 750 min./ max. mold height [mm] 127 - 227 Maximum opening width [mm] 352-542 injection unit Screw diameter [mm] 22 Injection volume [cm3] 34 Injection weight [g] 31 Injection pressure [bar] 2000

Description Universal tool milling machine from lid suitable for tooling, fixture making, mold making as well as training Travel: 500x400x440mm Speed:40-2000 rpm Recording: SK 40 Machine with plenty of accessories Technical data Table 600x380mm Longitudinal path (X,Y,Z axis) 500x400x440mm Tool holder: SK 40 Vertical spindle speeds: 40-2500rpm Feeds 2-2000mm/min Connection 50 Hz 3x 380V Spindle motor 3.8KW Machine weight approx. 1450kg Dimensions 2500x2700x2100mm

Clamping force [kN] 1800 Clearance between columns (hxv) [mm] 580 x 520 Min./max. mold height [mm] 225-550 Injection unit Screw diameter [mm] 45 Shot weight [g] 325,6 Injection pressure [bar] 2100

Fixing plate, magnetic table pair for sale. It can be attached with screws to an injection molding machine, machine tool or elsewhere. This allows an injection mold or other iron with a maximum size of 245x230 mm to be attached.

Clamping force [kN] 4500 Clearance between columns (hxv) [mm] 950x700 Min./max. mold height [mm] 330/780 Injection unit Screw diameter [mm] 65 Injection weight [g] 980.9 Injection pressure [bar] 2070

x-travel: 11200 mm y-travel: 3130 mm z-travel: 1000 mm Control: NUM 1060 W A-axis: +- 120 ° c-axis: +215/-210 ° spindle motor: 15 kW spindle taper: HSK-F63 turning speeds: 24000 U/min table width: 1500 mm table length: 9400 oder 2x3000 mm total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 14,6x5,0x4,225 m Use: e.g. for processing aluminum panels, drilling profiles, advertising (signs milling, etc.), mold construction (prototypes) and processing of light steel frames / -beams using HSC milling The vertically arranged high-frequency milling spindle for automatic Tool change is mounted in a fork head on the Z-axis plate. The Spindle can be moved with the fork head in 2 NC axes, in the A axis and the C-axis. The vertical movement is carried out via the Z-axis. Liquid cooling via a cooling unit. Tool magazine: moving plate changer in the potal, outsid ...

Thermoformer / heat sealer for product packaging in trays For flexible plastic trays, flexible plastic closure Rebuilt in 2015 With mold for 180 x 125mm trays Includes vacuum pump, and refrigerator DOCUMENTATION AVAILABLE

Used Ermaksan press brake Type CNCAP EVO 3100 135 CNC Bombering Y1, Y2, X, R, Z1 and Z2 CNC controlled Hydraulic Wila NS top clamp Sealing mold at the bottom

oven 650 Injection Mould Mold furnace temperature range 10 - 650 Celsius 1x1x1m (various possible) Kammertrockenöfen Kammertrockn er Öfen Ölofen Pulverbeschichtungstrockner Pulvereinbrennöfen Schachtöfen Schlichtetrockner Sinteröfen Sonderofen Sondertrockner Temperöfen Tro ckenöfen Trockn er Trockneranlagen Vorwärmofen Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen temperaturi te polaganim hlanenjem. Na ovoj povišenoj temperaturi u materijalu nastaju plastične deformacije te se unutarnja naprezanja izjednačuju. Nitriranje je postupak sličan je cemetiranju, gdje se površina dovodi u kontakt sa strujom dušika koji se veže sa željezom te tvori vrlo tvrde kristale željeznog nitrida (Fe4N). Ovako dobiveni površinski sloj vrlo je tvrd i otporan na trošenje. Nitriranjem se povečava dinamička čvrstoćai otpornost prema  ...

This FOSTAG 64fold injection mold for injection moulding machine was built in the year 2003 in Switzerland.

This HTW PCO 1810 injection mold for injection moulding machine was manufactured in the year 2018.

Plant complete with all the machinery and molds to produce plastic pots, saucers, cages and thermoformed pot holders of various types and sizes: from 40 cm. up to 1 m. Composed of: N1) 135 ton SANDRETTO plastic injection press N1) 135 ton SANDRETTO plastic injection press N1) 200 ton SANDRETTO plastic injection press N1) 300 ton SANDRETTO plastic injection press N1) 400 ton SANDRETTO plastic injection press N1) 5 pallets CAMPETELLA robot + labeller N1) 7 pallets CAMPETELLA robot + labeller N3) automatic stacking and coding lines N2) mold cabinets with drawers with a capacity of 1000 kg N1) refrigerator to cool water N1) freecooler to cool the oil N59) molds for flower pots

Injection unit Screw diameter: 35 mm Calculated injection volume: 168 cm3 Material pressure: 2000 bar Closing unit Closing force : 1000 kN Min. mold thickness: 320 mm Other Commissioning: 2006 Tonnage: 100

Clamping force [kN] 8000 Dimensions of mounting plates (hxv) [mm] 1600x1530 Clearance between columns (hxv) [mm] 1120x1100 Min./max. mold height [mm] min 1100 Injection unit Screw diameter [mm] 135 Injection volume [cm3] 8588 Injection weight [g] 7807

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

Screw diameter: 40 mm Calculated injection volume: 231 cm3 Length/diameter ratio: 20 L/D Pressure on the material: 2020 bars Closing unit Minimum mold thickness: 800 mm Max distance between trays: 650 mm Passage between columns: 420 x 420 mm Dimensions of trays: 590 x 600 mm General Heating power: 22 kW Total installed power: 33 kW Oil quantity: 180 L Dimensions: 4.2 x 2 x 1.4 m Weight: 4000 Kg Other Commissioned: 2007 Tonnage: 80

Description Mold controller: 8 zones Microcontrollers: LC 39 Output voltage: 230 V Temperature range: 0 - 499 °C With thermocouple and resistance cables of 3 meters.

Description CEEVER MOLD WASHING / DEGREASER MACHINE PLATFORM CAPACITY 500Kg BASKET SIZE 850 X 850 mm USEFUL HEIGHT 580 mm TANK CAPACITY 530 l SPRAYING PRESSURE 3 bar POWER SUPPLY 400 V CONSUMPTION WITH HEATING 17kW

Receiver capacity: 2 x 37 l working pressure: 4 - 8 bar Air consumption: 170 - 500 l/min. weight of the machine ca.: 36 Kg : 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

closing pressure: 11000 kN clamping plate: . mm distance between columns: . mm total power requirement: kW weight of the machine ca.: 45 t dimensions of the machine ca.: m Mold spraying machine available Manufacturer Acheson Model DAG 1000 FCT 2TB Year of construction 2002 Foundry robot available Manufacturer ABB Model IRB 6600 Control S4C-Plus Built in 2003 Deburring press available Manufacturer rice Model SEP 9-65 Built in 1988 Delivery time October 2018 An oven can optionally be purchased: Manufacturer Westofen Model W 90 SMC Capacity 900 kg Built in 1988 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description mold control unit: 5 zones microcontroller: AT Output voltage: 230V temperature range: 60° - 450° C

Description Mold controller: 8 zones Microcontrollers: S - Line Output voltage: 230 V Temperature range: 0 - 500 °C With thermocouple and resistance cables of 3 meters.

Description Mold controller: 8 zones Microcontrollers: S - Line Output voltage: 230 V Temperature range: 0 - 500 °C With thermocouple and resistance cables of 3 meters.

Two-station machine up to 3 ltr. Extruder 70/24D. Triple head 85 mm center to center. Moog TMC 3 control. Triple Proportional control for mold / carriage / calibration. Leak test pre-staged

Description Mold Control Unit: 1 zone microcontroller: RTC - 550 output voltage: 230 V temperature range: 0-400 ° C

Description COMPLETE ISLAND DIMENSIONS 7800 X 4000 X H4300 Press with second lateral injection press with rotary table thickness 166mm mold heating 12 zones Integrated Cartesian robot MULTILIFT V 15Kg Year 2011 X axis: 900 mm Y axis: 1400 mm Z axis: 3200 mm Motors: brushless B axis; not present C axis rotation: 90° Max load: 11 kg Interface integrated into the press

Description SILICONE PRESS 12 zone mold heating water channels 2 zones 6-zone thermoregulator control WAGNER Reinhardt-Technik pumping unit mod. LSR 200l and Twin year 2017

Description 4 zone mold heating Electric dosage

Description HOT ROOMS 4 ZONES PREPARATION FOR 8 MOLD SHUTTERS 2 EUROMAP 12 INTERFACE SOCKETS PNEUMATIC FRONT GATE CLOSURE

Description MACHINE WITH 2 BRUSHLESS MOVEMENTS: MOLD CLOSING AND LOADING many languages available

Description 4 zone mold heating Electric dosage

Description movements with brushless motors: closing - mold height movement - dosing the others are plumbers installed languages ​​Italian English German

Description working hours: 42600 24 zone mold heating

Description Mold heating 32 zones MACHINE SOLD IN THE STATE IN WHICH IT IS Missing monitor and floppy drive Missing tabs: - 2 AR281 cards - 3 TT081 boards - 1 PS244 / A card - AS141 connector (for closing transducer)

Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm

Description MACHINE WITH SERVO PUMP MOLD REDUCTION PLATE THICKNESS 70mm

Description 6 zone mold heating

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description Compression machine with rotating table diam. 1600 n. 3 heating floors, dim. 590 x 650 Opening stroke: 400mm Minimum mold: 100mm

Description 6 zone mold heating

Description ROTARY TABLE DIAMETER 1500mm MAXIMUM MOLD DIMENSION 400X400mm

Description 13 zone mold heating working hours: 3447

Description mold holder planes 740 X 680 New screw and barrell Sprue removal robot ENGEL mod. ER-USP 5 year:2006 pieces falling chute with waste selector

We have an injection molding system for sale • Netstal Synergy 3500-2700Ε year 2007 machine • incl. Closing Mold 72Cavity 29/25 cap 1.32gr.with /3,5sec. cycle /year 2016 Plastisud • Hot runner year 2016 Plastisud • Controller Custom made • Belts • Packaging unit 5-1-5 The machine is in production in Greece until the end of March 2024 and will be available for sale in May 2024.

Spindle diameter: 30mm, rotationalspeed: 7500rpm, with chip conveyor and base holder. Control: Siemens Sinumerik 840 C, length: 3210mm, width: 2084mm, height: 2214mm, weight: 3.2t. Line pressure: 210bar, injection force: 182kN, clamping force: 1000kN, opening stroke: 0-400mm, mold installation height: 450-750mm. An on-site inspection is possible.