135,702 used machines on RESALE, but how to find them? Machine Search
ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts
1) Vertical Rubber Molding Machine Manufacturer: Rutil Model: 2000/250 RS SX-F Stations: 1 Clamping Force: 500 Ton Heating Platens Dimensions: 520x650 mm Max Shot Volume: 2000 cc Max Daylight: 450 mm Minimal Mould Height: 100 mm 2) Vertical Rubber Molding Machine / NEEDS REPAIR - Manufacturer: Rutil - Model: MP3 700/150 - Stations: 3 - Clamping Force: 150 Ton - Heating Platens Dimensions: 420x500 mm - Max Shot Volume: 700 cc - Max Daylight: 400 mm - Minimal Mould Height: 140 mm 3) Vertical Rubber Molding Machine NEEDS REPAIR - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x500 mm - Max Shot Volume: 680 cc - Max Daylight: 400 mm - Minimal Mould Height: 70 mm 4) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x50 ...
ILLIG RDM70Kb Mold for PP Cups, Ø73 mm 32 Cavities, complete with Stacker Basket with Rods & Brushes & Rake, age May, 1997., Manufacturer: MARBACH
Lid Mold Manufactured by TERMOSTAMPI to fit Drinking Cups Ø98 mm, Age 2022, Forming mold 24 cavities (6 x 4 arrangement), 2 sets of inserts for:, Dome Lid For Cup Ø9 8mm ., Flat Lid For Cup Ø 98mm, Hole Punch Mold - Punch and Die., 24 cavities to Punch 24 holes diam.25 mm on Dome Lid., 24 cavities to Punch 24 cross cut., Steel Rule Pucning Mold :, with 24 cavities for both Dome and Flat Lid., Stacking Device:, for Domes and Flat Lids
ILLIG RDM70K Mold, dia. Ø70 mm, for PP Cups, 21 Cavities, age 1995, with 1 set of inserts and Stacker basket with Rods with Brushes. Missing engraved Cup bottom discs, as these are the intellectual property of the previous owner.
PP-Drinking Cup Mold for ILLIG RDM75Kc, manufactured by TERMOSTAMPI, age 2022 with Inmold Forming and Trimmimg, for PP-Cups Ø98 mm dia. for the ILLIG RDM 75Kc, consists of:, 24 cavities (6 x 4 arrangement), complete with Trimming Knives, Cavity Inserts, Ejectors, Down Holders., and 4 series of inserts for the following PP drinking cups:-, 24 oz, 20 oz, 16 oz, 12/ 14 oz, Complete with Stacker Parts for the ILLIG PH75 counter/ stacker
ILLIG RDM70K Mold for Ø75 mm dia. PS Cups, 21-Cavities, with 1 set of inserts, no Stacking Basket, age 1995. missing engraved Cup bottom discs, as these are the intellectual property of the previous owner. Very sparingly used !
MOLD BLOCKS for MAJOR CORRUGATORS, precision engineered in proven OEM quality, Range : 4,5 mm.ID to 500 mm OD, fast delivery, high precision, durable and reliable, accurate fit, maximum flexibility for bespoke parts
PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM
ALREADY SOLD Hypet 500 for sale We only sell the machine with a mold 144 cavity complete mold 29/25 neck finish preform weight 10.63 grams made by Husky This machine HPP 4.0 and ISS, fast speed. Cycle 6.2 (83612 preforms per hour) 2 Million preforms per day Manufactured 2011 Installed 2012 380v 50hz Excellent condition
Used Used Sipa Pet Blow Molding Machine: Year: 2009 Condition: As Is Model: SFR 8 Year: 2009 Speed: 12,600 bph with 1.5 L (also 0.75 L and 0.5 L) Type: rotary 8 cavities Molds included (4 different: two 0.5 cl, two 0.75 cl) Chiller included Preform elevator included Bottle neck type: 1881 Safety protection Code: W 125 More details: https://bottlingscout.com
Key data: 273 m², 5000 kg, 7300 mm
Volume flow 25,000 m3/h Exhaust fans 2x
Manufacturer: Moldow, Type: SA, Control: yes, Year: 1992, Volume flow rate m³/h: ca. 75.000, Filter surface in m²: 690, Qty. filter hoses: 400, Hose diameter in mm!: 220, Length of filter tubes: 2500, Number of filter filter gallerys: 11, Number of fans: 4, 2nd Exhaust fan kW: 22, 3rd Exhaust fan kW: 37, 4th Exhaust fan kW: 15, 5th extractor fan kW: 22, Year :1992
Hot runner controller - Mold Masters M2XS-24 Year of Make: 2016 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Hot runner controller - Mold Masters M1-24-24 / Like new Year of Make: 2019 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Hot runner controller - Mold Masters M1-24-24 Year of Make: 2016 Location: Lodz, Poland Description: 24 hot zones with cabling All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request
1 x Used ILLIG RDM70K PP-Mold for 8-Cavity, Rectangular Containers 145.5 x 65.3 x 41 mm age December 2007. Product drawing is attached.
1 x Used ILLIG RDM70K PP-Mold, 5-Cavites, Strawberry Containers 174 x 103 x 90 mm, age December 2005. Product drawing is attached.
This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine.
This 5-axis Hyundai Wia Hi-MOLD 560/5A vertical machining centre was manufactured in 2014. It features a table size of 1,250×600 mm, a maximum load capacity of 800 kg, and a high-speed spindle with 24,000 RPM and 33 kW power. The machine offers rapid feed rates of 50 m/min in all axes and a quick tool change time of 5.5 seconds. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia Hi-MOLD 560/5A machine we have for sale. Contact us for more information.
Complete PET filling line Krones / Sidel Capacity: 33.000 bph Bottle size: 1,5 ltr. PET bottles Closure: short neck PCO 28 - 1881 Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm) Filling products: carbonated water and soft drinks Year of manufacturing: from 1997 - 2014 Condition: regulary maintained The line is out of production and immediately available. The line can be inspected. The line is consisting of: Blowing machine Sidel SBO 20 Serie III capacity: 36.000 bph year of manufacturing: 2010 neck size: PCO 28 - 1881 incl. cooling unit Trane-RTAC 185 year of manufacturing: 2003 incl. preform feeding: SIDEL-EBHS 2050 year of manufacturing: 2010 preform container: SIDEL-EBHS 2050 year of manufacturing: 2010 incl. preform tilting device SIDEL-EBHS 2050 year of manufacturing: 2010 incl. air conveyor system available Air co ...
PET Aseptic filling line Sidel There are 2 capacities: 18.000 ltr./h and 27.000 ltr. / h - depending on the bottle sizes Capacity: 36.000 bph by 0,5 ltr. and 0,4 ltr. 18.000 bph by 1,5 ltr. Year of manufacturing: 2006 - 2025 Aseptic line produces aseptic products and has been operating since 2006. All maintenance activities have been done twice / year according to OEM specification and with original OEM parts by OEM service technicians. The line includes processing area (mixer, pasteurizer and aseptic tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper. OEM for the sensitive part of the line is Sidel and for processing – Tetra Pak. Over the years, all main elect ...
Filling and packaging lines for sausage products (or plant-based alternatives) in cans, consisting of:, 2 filling lines, Line 1: set up for 125 g - aluminum cans with a can diameter of 73 mm, Line output: approx. 150 cans / min., Line 2: set up for 200g/300g and 400g cans with a can diameter of 99mm., Output: approx. 70 cans / min., Sterilization:, The products were sterilized in full water autoclaves with rotation (5 available) that were overhauled by Trinitas Trading in 2017., 3 labeling and packaging lines:, The labeling and packaging line for 125 g cans consists of a Langguth hot melt labeling machine from 2016 and a virtually unused Wächter packaging system (leased system) from 2022., We will be happy to send you the complete list of all machines belonging to the lines upon request., The machines can also be purchased individually.
Non-returnable glass bottling line SIDEL capacity: 40.000 bph by 250 ml glass bottles year of manufacturing: 2003 bottle formats: 0,25 ltr., 0,33 ltr., 0,5 ltr. Filling product: Beer, CSD or other beverages The line was commissioned in 2003, has been well maintained. The line was in production until January 2026. The line is consisting of: Pallet transport for depalletizer Sidel / SIG Simonazzi / GEBO Bulk depalletizer Sidel / SIG Simonazzi / GEBO for bulk pallets 1.200 x 1.000 mm Pallet transport for palletizer Sidel / SIG Simonazzi Tray and/or Carton palletizer Sidel / SIG Simonazzi linear machine capacity: 350 - 660 layers/h Pallet shrinkwrapper Sidel / SIG Simonazzi / MSK capacity: 55 pallets/h Pallet labeller Sidel / SIG Simonazzi / Logopak capacity: 120 labels/h Carton erector Sidel /SIG Simonazzi capacit: 3.600 cartons/h Basket er ...
Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included
mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2
Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000
Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022
Sidel SBO 6 series 2 manufacturing year 2000 with full upgrade by Sidel 2024 Capacity 7.800 bph Set for quick change molds Personnalisation for preform neck 29/21 Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel Caterpillar oven & blowing wheel for 6 molds Solenoid valves Sidel Universal type Retrofit of elongation sensor PCC Sidel version V2.02 Sidel electrical cabinet Machine in production till end November 2025 Now dismantled and transfered to our warehouse Excellent PET blowing machine See video with link below
Set of blow molds for PET blowing machine Sidel SBO Universal - 10 molds HR for heat resistent bottle 1.0 litre - 10 molds for standard bottle1.0 litre Molds were used to produce PET bottles for juices Low working hours Molds are n very good condition Available immediately Can be customised
PET blow moulder SIDEL SBO 18 The machine was upgraded in 2006 with a new program for an output of 26,500 bph. The machine includes preform tippers for 2 octabins each. Preform steep conveyor to the inlet into the machine.
Used Blow Molding Machine SBO 16 S2 This used Sidel blow molding machine model SBO 16 S2 delivers high-performance PET bottle production for modern beverage and industrial packaging operations. Manufactured in 2001 and fully overhauled with warranty, it offers a nominal capacity up to 25,000 bph, making it a strong fit for second hand and used bottling line upgrades. The rotary platform with 16 molds supports continuous operation and stable quality for 1.5L bottle formats, with flexibility to adapt to other sizes via dedicated molds. Designed for PET containers, this machine aligns with beverage production requirements across a wide range of products including still and sparkling water, CSD, wine, beer, milk, oil, and spirits. Sidel engineering ensures robust build quality, while the Siemens PLC and Sidel HMI provide reliable automation and operator-friendly control. This blow molder is ...
Technical Specifications & Performance DataThe Sidel SBO2 is a robust second hand blow molding solution designed for reliable PET container production in beverage production and industrial packaging environments. This used bottling line component delivers consistent output for small-format bottles with efficient air recovery and integrated utilities.Manufacturer / Model: Sidel SBO2Year: 1992Production speed: up to 3,000 bph (bottles per hour)No. of cavities: 2Container type: PET (preform neck finish 1881)Air Recovery System: IncludedPreform handling peripherals: Preform elevator, tipper, and unscrambler not includedMachine status: In productionWeight: approx. 9,000 kgDocumentation: Manuals availableAdvanced Automation & Control SystemsThis Sidel SBO2 features PLC-based controls with a centralized operator panel for straightforward setup and monitoring. Recipe-driven parameters streamline ...
Sidel Blow Molding Machine SBO 6-10 Series 1 This used Sidel blow molding machine SBO 6-10 Series 1 is engineered for reliable PET bottle production with a maximum output of up to 6,000 bottles per hour. Designed for beverage production and industrial packaging environments, it integrates seamlessly into a used bottling line or as a standalone unit for second hand operations. With a robust rotary architecture, this machine supports high-quality PET container forming for water, beer, wine, milk, oil, spirits, and soft drinks, offering versatility for diverse beverage production needs. Manufactured by Sidel, a leader in PET blow molding technology, this model features quick-change mold capability and an operator-friendly control system. Its current setup supports 1.5L formats and a maximum container height of 320 mm, making it suitable for standard beverage formats commonly used in packagi ...
Blow Molding Machine Sidel SBO 14 This used Sidel SBO 14 blow molding machine is a proven rotary system engineered for high‑efficiency PET bottle production. Built in 1999, it delivers up to 18,000 bottles per hour and is well suited for beverage production and industrial packaging applications on used bottling lines. With 14 molds and robust mechanical design, it offers consistent performance for large formats such as 1.5L, making it a reliable choice for second hand PET bottling operations across water, soft drinks, beer, wine, spirits, milk, and edible oil segments. Manufactured by Sidel engineering, this model integrates smoothly within complete bottling lines or as a standalone blow molder feeding downstream filling, capping, and labeling equipment. It is available as seen, or fully overhauled and guaranteed, providing flexibility depending on your project timeline and budget. Des ...
Used Blow Molding Machine SBO 16 S2 This used Sidel blow molding machine is an industrial-grade solution for high-speed PET bottle production in beverage and food packaging. Overhauled and guaranteed, it offers reliable performance for manufacturers seeking to expand capacity or upgrade an existing used bottling line. Designed for PET containers with a current setup for 1.5L formats, it is suitable for beverage production including water, soft drinks, beer, wine, spirits, milk, and oil. The Sidel engineering platform ensures consistent blowing quality and robust operation in demanding industrial packaging environments. Manufactured by Sidel, this second hand SBO 16 S2 features 16 cavities and a nominal speed of 25,000 bph, making it a strong fit for medium-to-high throughput operations. Its rotary architecture and counterclockwise working direction support smooth handling and efficient c ...
Used pet blowing line: - Blowing SIDEL SBO 4/6, New 1997, capacity 4800 bottles/h,the dimensions of 5100 mm x 7700 mm x 3300 mm - Blow molding cooler Sogequip NRP 25, New 1997. - SIDEL preform feeder, New 1997 - Tippler preform BT-2 03, New 2002
Sidel SBO 12 PET Stretch Blow Moulding machine. Sidel SBO 12 PET Stretch Blow Moulding machine The Sidel SBO 12 blow molding machine is a state-of-the-art bi-oriented PET blow molding machine designed to produce high-quality bottles for flat and carbonated beverages at a rate of up to 19,200 bottles per hour. Utilizing a cold process, this system offers excellent flexibility and optimized production. Key features include: Cold Preform Infeed: Preforms are automatically loaded and transferred through a reheating system, ensuring precise temperature control. Efficient Heating & Blowing: Preforms are heated and blown into bottles through two-stage high-pressure air blowing for uniform wall thickness. Advanced Molding System: With automatic ejection for defective preforms, the SBO 12 ensures consistent bottle quality, while synchronized cams optimize the entire manufacturing pro ...
Used Used PET Blower Sidel 10.14 2013: Year: 2013 Condition: As Is Used PET Blower Sidel: Model: SBO 10/14 Year: 2013 Speed: 7.500 BPH Rotary 10 cavities Hopper included Elevator included Orientator included Inspector included Safety protections Code: W 113 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Condition: As Is Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Speed: 16.000 bph Model: sbo 16/16 Number of cavities: 16 Preform tipper Preform orienter Safety protections Code: W 77 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sidel Sbo 6: Year: 2002 Condition: As Is Used Blow Moulding Machine Sidel Sbo 6 Year: 2002 Speed: 10.000 bph Number of cavities: 6 Chiller not included Compressor not included Preform unscrambler Preform elevator Preform tipper Safety protections Code: W 89 More details: https://bottlingscout.com
Used Used PET Blower Sidel Sbo 6: Year: 1999 Condition: As Is Used PET Blower Sidel Sbo 6: Year: 1999 Speed: 7.800 bph Model: sbo 6 serie 2 Number of cavities: 6 Preform tipper sidel Hopper and preform feeder sidel Stamp not included Safety protections Code: W 85 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Condition: As Is Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Speed: 7.200 bph sul 1.5 l Model: sbo 6/10 serie 1 Number of cavities: 6 Bottle neck format 29/25 mm Preform elevator/orientator Stamp not included Worked hours: 47.000 Safety protections Code: W 84 More details: https://bottlingscout.com
Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 122 More details: https://bottlingscout.com
Used Used Sidel PET Blow Moulding Machine (24,000 bph): Year: 2002 Condition: As Is Model: SBO20 ? Series 2 Year: 2002 Speed: 24,000 BPH (Bottles Per Hour) Type: Rotary blow moulder Cavities: 20 cavities Neck: 1881 Included: Preform elevator and orientator Safety protection Code: W 123 More details: https://bottlingscout.com
Used Used labeller Sidel PET 36.000 bph: Year: 2007 Condition: As Is EA 638 | LABELLER SIDEL PET 36.000 BPH Year: 2007 Speed: 36.000 bph Direction: Clockwise Model: Alfa Rollquattro Formats: 0.5 LT | 0.75 LT | 1.5 LT 24 heads Nr.1 roll-fed stations Label presence inspection Safety protections Code: EA 638 More details: https://bottlingscout.com
Used Used pet Sidel labeller: Year: 2009 Condition: As Is Model: ROLLQUATTRO Year: 2009 Speed: 18.000 bph Rotative clockwise labeller 18 plates, mechanical cam 1 rollfed station for wraparound label OPP Manual connection/coupling Safety protection Code: EA 682 More details: https://bottlingscout.com
Sidel Flexible SL90 F8564T/Sm with Cold Glue 8/8/130 S3/E3 Equipped with 3 Cold Glue Modules for front and back body and neck labels on round glass bottles. Bottle min/max height: 150 / 350 mm Bottle min/max diameter: 50 / 100mm Label min/max height: 20 / 120 mm Label min/max length: 20 / 130 mm Speed- Machine will run comfortably 36,000 BPH @ 330ml on Cold Glue . (max speed 72,000)
maximum number of results exceeded
please refine your search
