mixing line for used for sale

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 without clamping jaws -Chuck size: Ø 400 mm -Bolt circle: mm -Through hole: 102 mm -Total dimensions: Ø 400 x 125 mm -Weight: 90 kg

Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle, grinding spindle -Manufacturer: Fortuna, grinding spindle precision spindle -Type: 15.UJ60 64 110 -Dimensions: see photos -Total dimensions: Ø 60 x 455 mm -Weight: 6.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece soft top jaw set -Width: 22 mm -Dimensions total: 105/65/H45 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: Top jaw set 3-piece soft 2 sets -Width: 36 mm -Shipping/Price: complete -Dimensions total: 145/220/H63 mm -Total weight: 12.3 kg

-Pizza oven 2 tiers -Manufacturer: Moretto Forni -Model: PD60.60 -400 volts -8.4 kW -Weight: 111 kg -currently 3 ovens with 2 shelves each available in the warehouse Year of construction: 2013, 2016 and 2018

10 and 20 ltr for sale. Closure 61 mm

P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...

Fortuna semi-automatic bread roll press size A4 Bakery condition Ball knob repaired with duct tape two press plates as good as new Knife in very good condition, as not used for sourdough absolutely neat and smooth running Video about test run and more pictures available

Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 1 piece available -Dimensions: 305/145/H400 mm -Weight: 5.4 kg

Ice machine Ital Form Stainless steel construction and specific materials approved for food contact Standard working conditions: - Inlet water temperature 15°C - Ambient air temperature 20°C Dimensions: 1380x740x1015mm Electric power: 6kW Voltage: 400V 50Hz Productivity: 1500kg/24h Ice temperature: -5°C / -7°C Ice flake thickness: 0.9/1.2 mm Weight: 381 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg

Baking floor Model Forno 246 Modular deck oven for trays 2 x 40/60 - 1 x 60/80 Program control with night start Stove dimensions inside: 650x800x210mm, WxDxH Stainless steel Temperature up to max. 300°C Connection 400V, 5.4 kW, 16A-CEE plug Dimensions: 985 x 1275 x 470 mm, WxDxH (floor) New device 24-month warranty on spare parts Water connection 3/4 inch, water drain DN 40 Option: Hood Mobile base frame with sheet metal tray You can find many more ovens here!

workbench, work table, assembly bench -Width: 1250 mm -Depth: 700 mm -Height: 860 mm -Drawer: 1 -Weight: 75 kg

Baking floor Model Forno 446 Modular deck oven for trays 4 x 40/60 - 2 x 60/80 Program control with night start Stove dimensions inside: 1250x800x210mm, WxDxH Stainless steel Temperature up to max. 300°C Connection 400V, 8 kW, 16A-CEE plug Dimensions: 1555 x 1275 x 470 mm, WxDxH (floor) Weight 240 kg (floor) New device 24 months warranty Water connection 3/4 inch, water drain DN 40 Option: Hood Mobile base frame with sheet metal tray We have a wide range of deck ovens!

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 315 mm -Interchangeable jaws: soft -Short taper mount: Ø 135 mm -Bolt circle: 172 mm -Weight: 90 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm -Weight: 19 kg

30% special discount Gebhardt ConVer 146.2 freight elevators, 4 pieces with 4 stops, through-loading doors front and rear, upper drive, color 7043 gray Conveyor height 9000 mm / car width 1800 mm / car depth 1460 mm / car height 2000 mm / approach ramp 100 mm / pit also possible 120 mm Heights adjustable Machines are new and available from stock, delivery time with adjustment approx. 4-5 weeks, without changes immediately Price per piece including 30% special discount without assembly and VAT

Key data: 1000 mm, 1 t

for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg

Two-chamber vacuum machine Ital Form Dimensions of the machine: 1845×868×1020mm Chamber dimensions: 880x755x170mm Sealing length: 820mm Number of heaters: 2 Electric power: 3kW Weight: 295kg

Key data: 800 mm, 1900 kg

A favourable price and quality are not a contradiction at Hanst Tec - after all, there is the FORMAXX Z series. Conventional die-sinking EDM systems designed in such a way that their price enables cost-effective hourly rates, while the technology fulfils all the quality criteria that are typical for Hanst Tec: - easy to operate - reliable Traverse paths: X - 500, Y - 400, Z - 350 mm maximum distance Table - working head: 275-625 mm Workpiece load: 1900 kg The machine is in good condition, and available immediately!

Sparc Cerberus Combination unit Fortress Metal detector head Usable aperture - 350mm x 120mm Conveyor - 300mm Weigh Table length - 520mm Right to left direction Ply belt 16amp single phase plug machine is fully tested and working with new belts, bins supplied and all fail safes working Lockable bin, bin full etc Supermarket Spec

Universal Machine Mixer Type 45 Bowl capacity approx. 45 litres with tilt function 180° Capacity approx. 10 to 180 litres/hour E-system NEW Connection 400V, 5.5 kW,16A-CEE plug Machine More blenders in stock!

diameter: 315 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 0,1 m bore 75 mm KK 140 4 pcs. fastening screws 173 / M 6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...

Slitting line with Siemens Touch control, electric roller shears, length measuring unit, control is carried out by entering the length and number of pieces Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out Sheet width: 1250 mm Sheet thickness steel: 1.0 mm Colour: blue/yellow Total power requirement: 16 A Cutting speed: 25 m/min Coil weight: 2 t without straightening rollers Number of blades: 5 pieces Machine number: 101876 MST+AL

Bread roll system composed of: 4-row Fortuna head machine type Primus 4 Weight range 40-110gr, TOUCH control Stainless steel Kövy proofing room type KA-S with cutting and punching station with disinfection with deduction with humidification station - Bakery condition

Powder Coating Booth Open Spray Stand Dimensions of powder level Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 pc. 6000 m³/h Power 3 kW (electric motor) Filter 4 type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 Pcs. 1" "Turbo" Italy Absolute filter 1 pc. type bag filter Powder Pistol Wagner "Prima Sprint" Mains Standard 230 VAC Frequency 50 – 60 Hz Input compressed air 6-8 bar Output compressed air 0.05 – 5.5 Nm³/hr. Powder curing furnace Inner dimension length 3,225 mm Inner dimension width 1,400 mm Inner dimensions height 2,000 mm Insulation rock wool 150mm [75 Kg/m³] Temperature max. 220°C Fans 1 pc. 4,500 m³/h Electric Motors 1 pc 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal power 39 kW Doors on both sides 2 pcs. Manual, insulated with rock wool 150mm 70Kg/m³ Heating indirectly via thermoblock, Heating Cha ...

4,000 m construction profiles, C-shape galvanized Used goods, good condition, see pictures Length per piece approx. 12m Profiles 110x90mm Material thickness approx. 3mm Negotiation price: € 4,90 net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

General features: Touch screen Multi-step cooking function Even heat distribution with two-way fan Adjustable cooking temperature between 0-300 °C Adjustable cooking time and digital display Door system with sensors Tempered glass Inner glass that can be opened for easy cleaning Stainless steel body Combined oven Dimensions: 990x1330x1240 mm Capacity of trays: 7+2/400x600 mm Electrical power: 15 KW+5.5 KW 380 V Weight: 360 kg Fermentation chamber Dimensions: 990x1330x770 mm Tray capacity: 9/400x600 mm Electric power: 3 KW Weight: 103 kg

Baking oven with fireclay strip Conveyor belt in refractory stone fillets Self-lubricated bearings for simplified maintenance Stainless steel front, sides, top, and interior The Eco button set the oven on standby during work pauses to save energy Digital control bake time and conveyor speed Conveyor Belt Width：800mm Electrical power: 17-34kW External dimensions: 95x145x110cm Maximum operating temperature: up to 450C

Manual dough divider Ability to work in any environment Blades made of stainless steel Divide the dough completely, non-sticky Disassembling the desk Dimensions: 370×590×1160mm Dough weight: 30-180 g/pc Capacity: 20 pcs Weight: 125 kg

Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Weight: 220kg

Manual dough divider Ability to work in any environment Blades made of stainless steel Divide the dough completely, non-sticky Disassembling the desk Dimensions: 370×590×1160mm Dough weight: 30-180 g/pc Capacity: 36 pcs Weight: 125 kg

Dough laminator Dimensions: 3480x1110x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 610x2800mm Distance with adjustable roller: 1-40 mm Weight: 260kg

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-300 grams Machine weight: 62 kg Delivery time: 6-8 weeks after advance payment

Table dough laminator Ital Form Dimensions: 2350x870x620mm Electrical power: 0.4kW Voltage: 220V 50Hz Distance with adjustable roller: 1-35 mm Weight: 150 kg

Tubular dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry Dimensions: 350x550x800mm Electric power: 0.6kW Portion weight: 30-600 grams Machine weight: 65 kg

Table dough laminator Ital Form Dimensions: 2350x910x650mm Conveyor belt size: 500x1980mm Distance with adjustable roller: 1-40 mm Electrical power: 0.55kW Voltage: 380V 50Hz Weight: 130 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1200mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Dough laminator Ital Form Robust construction Large cylinders ensure excellent lamination, as well as reliability and high durability Dimensions of the open machine: 3380x1010x1160mm Dimensions of the closed machine: 1080x1010x2250mm Tape length: 1500mm Electric power: 0.75kW / 1.1kW Voltage: 400V 50Hz Maximum quantity of workable dough: 8kg Machine weight: 250 kg

Machine type: Standing Dough Sheeter Material: Full Stainless Steel Belt size: 630 x 2400 mm Expanded: 3100 x 1100 mm Folded: 760 x 1720 mm Dimensions: 3100 x 1060 x 1100 mm Roller adjustable gap: 1-38 mm Max rolling capacity: 6.5kg/time Electric power: 0.75 kW - 380 V Weight: 260 kg

Moulding machine Ital Form Made of duralumin and steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form Completely made of stainless steel 2 cylinders Rollers 500 mm long Dimensions: 820x900x1200mm Electric power: 0.75kW Voltage: 400V, 3 PH. 50 Hz Weight: 155 kg

Moulding machine Ital Form 4 cylinders Rollers 500 mm long Dimensions: 850x1200x1150mm Electric power: 0.75kW Weight: 170 kg

Bread maker and rolling pin maker Dimensions: 88x88x120 Voltage: 220-400 V Electric power: 0,55 kW Dough weight: 20-1000g

Automatic bread cutting machine Automatic bread slicer of modern design is made of stainless steel and fully complies with CE standards It is designed for large capacity and serial bread cutting It has a system for packing sliced bread It is easy to transport as well as to clean and maintain By removing the drawer in the lower part of the machine, the crumbs are emptied so that the machine does not require any additional maintenance Dimensions: 242 × 75 × 135cm Electrical power: 0.85kW Weight: 312kg Capacity: 1500 loaf / h Slice thickness: 6-15mm

Spiral dough mixers Container capacity (capacity): 20 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 8 kg Bowl Capacity: 20 liter Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Electric Power: 1.5 kW Machine Size: 730x390x900 mm

Spiral dough mixer Container capacity (capacity): 32 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) Specification of Electric Dough Mixer Flour Capacity: 12.5 kg Bowl Capacity: 32 liters Mixing Speed: 150/200 r/min Bowl Speed: 12/20 r/min Voltage: 220V/380V 50Hz Electric Power: 1.5 kW Machine Size: 750x435x900 mm